mbox series

[0/2] Add support for ARTPEC-8 UART

Message ID 20220307085053.1636475-1-vincent.whitchurch@axis.com
Headers show
Series Add support for ARTPEC-8 UART | expand

Message

Vincent Whitchurch March 7, 2022, 8:50 a.m. UTC 
This series adds support for the UART hardware on the ARTPEC-8 chip.  This
block is already supported by an existing driver so only a small patch to
describe the properties of the variant is required.

Vincent Whitchurch (2):
  dt-bindings: serial: samsung: Add ARTPEC-8 UART
  tty: serial: samsung: Add ARTPEC-8 support

 .../bindings/serial/samsung_uart.yaml         |  1 +
 drivers/tty/serial/Kconfig                    |  2 +-
 drivers/tty/serial/samsung_tty.c              | 38 +++++++++++++++++++
 3 files changed, 40 insertions(+), 1 deletion(-)