| Message ID | 20221003092602.1323944-1-daniel.lezcano@linaro.org |
|---|---|
| Headers | show |
| Series | Rework the trip points creation | expand |
Hi Daniel, On 03.10.2022 11:25, Daniel Lezcano wrote: > This work is the pre-requisite of handling correctly when the trip > point are crossed. For that we need to rework how the trip points are > declared and assigned to a thermal zone. > > Even if it appears to be a common sense to have the trip points being > ordered, this no guarantee neither documentation telling that is the > case. > > One solution could have been to create an ordered array of trips built > when registering the thermal zone by calling the different get_trip* > ops. However those ops receive a thermal zone pointer which is not > known as it is in the process of creating it. > > This cyclic dependency shows we have to rework how we manage the trip > points. > > Actually, all the trip points definition can be common to the backend > sensor drivers and we can factor out the thermal trip structure in all > of them. > > Then, as we register the thermal trips array, they will be available > in the thermal zone structure and a core function can return the trip > given its id. > > The get_trip_* ops won't be needed anymore and could be removed. The > resulting code will be another step forward to a self encapsulated > generic thermal framework. > > Most of the drivers can be converted more or less easily. This series > does a first round with most of the drivers. Some remain and will be > converted but with a smaller set of changes as the conversion is a bit > more complex. > > Changelog: > v8: > - Pretty oneline change and parenthesis removal (Rafael) > - Collected tags > v7: > - Added missing return 0 in the x86_pkg_temp driver > v6: > - Improved the code for the get_crit_temp() function as suggested by > Rafael > - Removed inner parenthesis in the set_trip_temp() function and invert the > conditions. Check the type of the trip point is unchanged > - Folded patch 4 with 1 > - Add per thermal zone info message in the bang-bang governor > - Folded the fix for an uninitialized variable in > int340x_thermal_zone_add() > v5: > - Fixed a deadlock when calling thermal_zone_get_trip() while > handling the thermal zone lock > - Remove an extra line in the sysfs change > - Collected tags > v4: > - Remove extra lines on exynos changes as reported by Krzysztof Kozlowski > - Collected tags > v3: > - Reorg the series to be git-bisect safe > - Added the set_trip generic function > - Added the get_crit_temp generic function > - Removed more dead code in the thermal-of > - Fixed the exynos changelog > - Fixed the error check for the exynos drivers > - Collected tags > v2: > - Added missing EXPORT_SYMBOL_GPL() for thermal_zone_get_trip() > - Removed tab whitespace in the acerhdf driver > - Collected tags > > Cc: Raju Rangoju <rajur@chelsio.com> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Eric Dumazet <edumazet@google.com> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Paolo Abeni <pabeni@redhat.com> > Cc: Peter Kaestle <peter@piie.net> > Cc: Hans de Goede <hdegoede@redhat.com> > Cc: Mark Gross <markgross@kernel.org> > Cc: Miquel Raynal <miquel.raynal@bootlin.com> > Cc: "Rafael J. Wysocki" <rafael@kernel.org> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > Cc: Amit Kucheria <amitk@kernel.org> > Cc: Zhang Rui <rui.zhang@intel.com> > Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> > Cc: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com> > Cc: Florian Fainelli <f.fainelli@gmail.com> > Cc: Ray Jui <rjui@broadcom.com> > Cc: Scott Branden <sbranden@broadcom.com> > Cc: Support Opensource <support.opensource@diasemi.com> > Cc: Lukasz Luba <lukasz.luba@arm.com> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Sascha Hauer <s.hauer@pengutronix.de> > Cc: Pengutronix Kernel Team <kernel@pengutronix.de> > Cc: Fabio Estevam <festevam@gmail.com> > Cc: NXP Linux Team <linux-imx@nxp.com> > Cc: Thara Gopinath <thara.gopinath@linaro.org> > Cc: Andy Gross <agross@kernel.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se> > Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Cc: Alim Akhtar <alim.akhtar@samsung.com> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Jonathan Hunter <jonathanh@nvidia.com> > Cc: Eduardo Valentin <edubezval@gmail.com> > Cc: Keerthy <j-keerthy@ti.com> > Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > Cc: Masami Hiramatsu <mhiramat@kernel.org> > Cc: Antoine Tenart <atenart@kernel.org> > Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> > Cc: Dmitry Osipenko <digetx@gmail.com> > Cc: netdev@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Cc: platform-driver-x86@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: linux-rpi-kernel@lists.infradead.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-arm-msm@vger.kernel.org > Cc: linux-renesas-soc@vger.kernel.org > Cc: linux-samsung-soc@vger.kernel.org > Cc: linux-tegra@vger.kernel.org > Cc: linux-omap@vger.kernel.org > > Daniel Lezcano (29): > thermal/core: Add a generic thermal_zone_get_trip() function > thermal/sysfs: Always expose hysteresis attributes > thermal/core: Add a generic thermal_zone_set_trip() function > thermal/core/governors: Use thermal_zone_get_trip() instead of ops > functions > thermal/of: Use generic thermal_zone_get_trip() function > thermal/of: Remove unused functions > thermal/drivers/exynos: Use generic thermal_zone_get_trip() function > thermal/drivers/exynos: of_thermal_get_ntrips() > thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by > thermal_zone_get_trip() > thermal/drivers/tegra: Use generic thermal_zone_get_trip() function > thermal/drivers/uniphier: Use generic thermal_zone_get_trip() function > thermal/drivers/hisi: Use generic thermal_zone_get_trip() function > thermal/drivers/qcom: Use generic thermal_zone_get_trip() function > thermal/drivers/armada: Use generic thermal_zone_get_trip() function > thermal/drivers/rcar_gen3: Use the generic function to get the number > of trips > thermal/of: Remove of_thermal_get_ntrips() > thermal/of: Remove of_thermal_is_trip_valid() > thermal/of: Remove of_thermal_set_trip_hyst() > thermal/of: Remove of_thermal_get_crit_temp() > thermal/drivers/st: Use generic trip points > thermal/drivers/imx: Use generic thermal_zone_get_trip() function > thermal/drivers/rcar: Use generic thermal_zone_get_trip() function > thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function > thermal/drivers/da9062: Use generic thermal_zone_get_trip() function > thermal/drivers/ti: Remove unused macros ti_thermal_get_trip_value() / > ti_thermal_trip_is_valid() > thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function > thermal/drivers/cxgb4: Use generic thermal_zone_get_trip() function > thermal/intel/int340x: Replace parameter to simplify > thermal/drivers/intel: Use generic thermal_zone_get_trip() function I've tested this v8 patchset after fixing the issue with Exynos TMU with https://lore.kernel.org/all/20221003132943.1383065-1-daniel.lezcano@linaro.org/ patch and I got the following lockdep warning on all Exynos-based boards: ====================================================== WARNING: possible circular locking dependency detected 6.0.0-rc1-00083-ge5c9d117223e #12945 Not tainted ------------------------------------------------------ swapper/0/1 is trying to acquire lock: c1ce66b0 (&data->lock#2){+.+.}-{3:3}, at: exynos_get_temp+0x3c/0xc8 but task is already holding lock: c2979b94 (&tz->lock){+.+.}-{3:3}, at: thermal_zone_device_update.part.0+0x3c/0x528 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&tz->lock){+.+.}-{3:3}: mutex_lock_nested+0x1c/0x24 thermal_zone_get_trip+0x20/0x44 exynos_tmu_initialize+0x144/0x1e0 exynos_tmu_probe+0x2b0/0x728 platform_probe+0x5c/0xb8 really_probe+0xe0/0x414 __driver_probe_device+0xa0/0x208 driver_probe_device+0x30/0xc0 __driver_attach+0xf0/0x1f0 bus_for_each_dev+0x70/0xb0 bus_add_driver+0x174/0x218 driver_register+0x88/0x11c do_one_initcall+0x64/0x380 kernel_init_freeable+0x1c0/0x224 kernel_init+0x18/0x12c ret_from_fork+0x14/0x2c 0x0 -> #0 (&data->lock#2){+.+.}-{3:3}: lock_acquire+0x124/0x3e4 __mutex_lock+0x90/0x948 mutex_lock_nested+0x1c/0x24 exynos_get_temp+0x3c/0xc8 __thermal_zone_get_temp+0x5c/0x12c thermal_zone_device_update.part.0+0x78/0x528 __thermal_cooling_device_register.part.0+0x298/0x354 __cpufreq_cooling_register.constprop.0+0x138/0x218 of_cpufreq_cooling_register+0x48/0x8c cpufreq_online+0x8d0/0xb2c cpufreq_add_dev+0xb0/0xec subsys_interface_register+0x108/0x118 cpufreq_register_driver+0x15c/0x380 dt_cpufreq_probe+0x2e4/0x434 platform_probe+0x5c/0xb8 really_probe+0xe0/0x414 __driver_probe_device+0xa0/0x208 driver_probe_device+0x30/0xc0 __driver_attach+0xf0/0x1f0 bus_for_each_dev+0x70/0xb0 bus_add_driver+0x174/0x218 driver_register+0x88/0x11c do_one_initcall+0x64/0x380 kernel_init_freeable+0x1c0/0x224 kernel_init+0x18/0x12c ret_from_fork+0x14/0x2c 0x0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&tz->lock); lock(&data->lock#2); lock(&tz->lock); lock(&data->lock#2); *** DEADLOCK *** 5 locks held by swapper/0/1: #0: c1c8648c (&dev->mutex){....}-{3:3}, at: __driver_attach+0xe4/0x1f0 #1: c1210434 (cpu_hotplug_lock){++++}-{0:0}, at: cpufreq_register_driver+0xc4/0x380 #2: c1ed8298 (subsys mutex#8){+.+.}-{3:3}, at: subsys_interface_register+0x4c/0x118 #3: c131f944 (thermal_list_lock){+.+.}-{3:3}, at: __thermal_cooling_device_register.part.0+0x238/0x354 #4: c2979b94 (&tz->lock){+.+.}-{3:3}, at: thermal_zone_device_update.part.0+0x3c/0x528 stack backtrace: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc1-00083-ge5c9d117223e #12945 Hardware name: Samsung Exynos (Flattened Device Tree) unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from check_noncircular+0xf0/0x158 check_noncircular from __lock_acquire+0x15e8/0x2a7c __lock_acquire from lock_acquire+0x124/0x3e4 lock_acquire from __mutex_lock+0x90/0x948 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from exynos_get_temp+0x3c/0xc8 exynos_get_temp from __thermal_zone_get_temp+0x5c/0x12c __thermal_zone_get_temp from thermal_zone_device_update.part.0+0x78/0x528 thermal_zone_device_update.part.0 from __thermal_cooling_device_register.part.0+0x298/0x354 __thermal_cooling_device_register.part.0 from __cpufreq_cooling_register.constprop.0+0x138/0x218 __cpufreq_cooling_register.constprop.0 from of_cpufreq_cooling_register+0x48/0x8c of_cpufreq_cooling_register from cpufreq_online+0x8d0/0xb2c cpufreq_online from cpufreq_add_dev+0xb0/0xec cpufreq_add_dev from subsys_interface_register+0x108/0x118 subsys_interface_register from cpufreq_register_driver+0x15c/0x380 cpufreq_register_driver from dt_cpufreq_probe+0x2e4/0x434 dt_cpufreq_probe from platform_probe+0x5c/0xb8 platform_probe from really_probe+0xe0/0x414 really_probe from __driver_probe_device+0xa0/0x208 __driver_probe_device from driver_probe_device+0x30/0xc0 driver_probe_device from __driver_attach+0xf0/0x1f0 __driver_attach from bus_for_each_dev+0x70/0xb0 bus_for_each_dev from bus_add_driver+0x174/0x218 bus_add_driver from driver_register+0x88/0x11c driver_register from do_one_initcall+0x64/0x380 do_one_initcall from kernel_init_freeable+0x1c0/0x224 kernel_init_freeable from kernel_init+0x18/0x12c kernel_init from ret_from_fork+0x14/0x2c Exception stack(0xf082dfb0 to 0xf082dff8) ... Let me know if You need anything more to test. > drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 2 - > .../ethernet/chelsio/cxgb4/cxgb4_thermal.c | 41 +---- > drivers/platform/x86/acerhdf.c | 73 +++----- > drivers/thermal/armada_thermal.c | 39 ++--- > drivers/thermal/broadcom/bcm2835_thermal.c | 8 +- > drivers/thermal/da9062-thermal.c | 52 +----- > drivers/thermal/gov_bang_bang.c | 39 +++-- > drivers/thermal/gov_fair_share.c | 18 +- > drivers/thermal/gov_power_allocator.c | 51 +++--- > drivers/thermal/gov_step_wise.c | 22 ++- > drivers/thermal/hisi_thermal.c | 11 +- > drivers/thermal/imx_thermal.c | 72 +++----- > .../int340x_thermal/int340x_thermal_zone.c | 33 ++-- > .../int340x_thermal/int340x_thermal_zone.h | 4 +- > .../processor_thermal_device.c | 10 +- > drivers/thermal/intel/x86_pkg_temp_thermal.c | 120 +++++++------ > drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 39 ++--- > drivers/thermal/rcar_gen3_thermal.c | 2 +- > drivers/thermal/rcar_thermal.c | 53 +----- > drivers/thermal/samsung/exynos_tmu.c | 57 +++---- > drivers/thermal/st/st_thermal.c | 47 +---- > drivers/thermal/tegra/soctherm.c | 33 ++-- > drivers/thermal/tegra/tegra30-tsensor.c | 17 +- > drivers/thermal/thermal_core.c | 160 +++++++++++++++--- > drivers/thermal/thermal_core.h | 24 +-- > drivers/thermal/thermal_helpers.c | 28 +-- > drivers/thermal/thermal_netlink.c | 21 +-- > drivers/thermal/thermal_of.c | 116 ------------- > drivers/thermal/thermal_sysfs.c | 133 +++++---------- > drivers/thermal/ti-soc-thermal/ti-thermal.h | 15 -- > drivers/thermal/uniphier_thermal.c | 27 ++- > include/linux/thermal.h | 10 ++ > 32 files changed, 559 insertions(+), 818 deletions(-) > Best regards
On 03/10/2022 16:10, Marek Szyprowski wrote: > Hi Daniel, > > On 03.10.2022 11:25, Daniel Lezcano wrote: >> This work is the pre-requisite of handling correctly when the trip >> point are crossed. For that we need to rework how the trip points are >> declared and assigned to a thermal zone. >> >> Even if it appears to be a common sense to have the trip points being >> ordered, this no guarantee neither documentation telling that is the >> case. >> >> One solution could have been to create an ordered array of trips built >> when registering the thermal zone by calling the different get_trip* >> ops. However those ops receive a thermal zone pointer which is not >> known as it is in the process of creating it. >> >> This cyclic dependency shows we have to rework how we manage the trip >> points. >> >> Actually, all the trip points definition can be common to the backend >> sensor drivers and we can factor out the thermal trip structure in all >> of them. >> >> Then, as we register the thermal trips array, they will be available >> in the thermal zone structure and a core function can return the trip >> given its id. >> >> The get_trip_* ops won't be needed anymore and could be removed. The >> resulting code will be another step forward to a self encapsulated >> generic thermal framework. >> >> Most of the drivers can be converted more or less easily. This series >> does a first round with most of the drivers. Some remain and will be >> converted but with a smaller set of changes as the conversion is a bit >> more complex. >> >> Changelog: >> v8: >> - Pretty oneline change and parenthesis removal (Rafael) >> - Collected tags >> v7: >> - Added missing return 0 in the x86_pkg_temp driver >> v6: >> - Improved the code for the get_crit_temp() function as suggested by >> Rafael >> - Removed inner parenthesis in the set_trip_temp() function and invert the >> conditions. Check the type of the trip point is unchanged >> - Folded patch 4 with 1 >> - Add per thermal zone info message in the bang-bang governor >> - Folded the fix for an uninitialized variable in >> int340x_thermal_zone_add() >> v5: >> - Fixed a deadlock when calling thermal_zone_get_trip() while >> handling the thermal zone lock >> - Remove an extra line in the sysfs change >> - Collected tags >> v4: >> - Remove extra lines on exynos changes as reported by Krzysztof Kozlowski >> - Collected tags >> v3: >> - Reorg the series to be git-bisect safe >> - Added the set_trip generic function >> - Added the get_crit_temp generic function >> - Removed more dead code in the thermal-of >> - Fixed the exynos changelog >> - Fixed the error check for the exynos drivers >> - Collected tags >> v2: >> - Added missing EXPORT_SYMBOL_GPL() for thermal_zone_get_trip() >> - Removed tab whitespace in the acerhdf driver >> - Collected tags >> >> Cc: Raju Rangoju <rajur@chelsio.com> >> Cc: "David S. Miller" <davem@davemloft.net> >> Cc: Eric Dumazet <edumazet@google.com> >> Cc: Jakub Kicinski <kuba@kernel.org> >> Cc: Paolo Abeni <pabeni@redhat.com> >> Cc: Peter Kaestle <peter@piie.net> >> Cc: Hans de Goede <hdegoede@redhat.com> >> Cc: Mark Gross <markgross@kernel.org> >> Cc: Miquel Raynal <miquel.raynal@bootlin.com> >> Cc: "Rafael J. Wysocki" <rafael@kernel.org> >> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> >> Cc: Amit Kucheria <amitk@kernel.org> >> Cc: Zhang Rui <rui.zhang@intel.com> >> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> >> Cc: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com> >> Cc: Florian Fainelli <f.fainelli@gmail.com> >> Cc: Ray Jui <rjui@broadcom.com> >> Cc: Scott Branden <sbranden@broadcom.com> >> Cc: Support Opensource <support.opensource@diasemi.com> >> Cc: Lukasz Luba <lukasz.luba@arm.com> >> Cc: Shawn Guo <shawnguo@kernel.org> >> Cc: Sascha Hauer <s.hauer@pengutronix.de> >> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> >> Cc: Fabio Estevam <festevam@gmail.com> >> Cc: NXP Linux Team <linux-imx@nxp.com> >> Cc: Thara Gopinath <thara.gopinath@linaro.org> >> Cc: Andy Gross <agross@kernel.org> >> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> >> Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se> >> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> >> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >> Cc: Alim Akhtar <alim.akhtar@samsung.com> >> Cc: Thierry Reding <thierry.reding@gmail.com> >> Cc: Jonathan Hunter <jonathanh@nvidia.com> >> Cc: Eduardo Valentin <edubezval@gmail.com> >> Cc: Keerthy <j-keerthy@ti.com> >> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> >> Cc: Masami Hiramatsu <mhiramat@kernel.org> >> Cc: Antoine Tenart <atenart@kernel.org> >> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> >> Cc: Dmitry Osipenko <digetx@gmail.com> >> Cc: netdev@vger.kernel.org >> Cc: linux-kernel@vger.kernel.org >> Cc: platform-driver-x86@vger.kernel.org >> Cc: linux-pm@vger.kernel.org >> Cc: linux-rpi-kernel@lists.infradead.org >> Cc: linux-arm-kernel@lists.infradead.org >> Cc: linux-arm-msm@vger.kernel.org >> Cc: linux-renesas-soc@vger.kernel.org >> Cc: linux-samsung-soc@vger.kernel.org >> Cc: linux-tegra@vger.kernel.org >> Cc: linux-omap@vger.kernel.org >> >> Daniel Lezcano (29): >> thermal/core: Add a generic thermal_zone_get_trip() function >> thermal/sysfs: Always expose hysteresis attributes >> thermal/core: Add a generic thermal_zone_set_trip() function >> thermal/core/governors: Use thermal_zone_get_trip() instead of ops >> functions >> thermal/of: Use generic thermal_zone_get_trip() function >> thermal/of: Remove unused functions >> thermal/drivers/exynos: Use generic thermal_zone_get_trip() function >> thermal/drivers/exynos: of_thermal_get_ntrips() >> thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by >> thermal_zone_get_trip() >> thermal/drivers/tegra: Use generic thermal_zone_get_trip() function >> thermal/drivers/uniphier: Use generic thermal_zone_get_trip() function >> thermal/drivers/hisi: Use generic thermal_zone_get_trip() function >> thermal/drivers/qcom: Use generic thermal_zone_get_trip() function >> thermal/drivers/armada: Use generic thermal_zone_get_trip() function >> thermal/drivers/rcar_gen3: Use the generic function to get the number >> of trips >> thermal/of: Remove of_thermal_get_ntrips() >> thermal/of: Remove of_thermal_is_trip_valid() >> thermal/of: Remove of_thermal_set_trip_hyst() >> thermal/of: Remove of_thermal_get_crit_temp() >> thermal/drivers/st: Use generic trip points >> thermal/drivers/imx: Use generic thermal_zone_get_trip() function >> thermal/drivers/rcar: Use generic thermal_zone_get_trip() function >> thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function >> thermal/drivers/da9062: Use generic thermal_zone_get_trip() function >> thermal/drivers/ti: Remove unused macros ti_thermal_get_trip_value() / >> ti_thermal_trip_is_valid() >> thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function >> thermal/drivers/cxgb4: Use generic thermal_zone_get_trip() function >> thermal/intel/int340x: Replace parameter to simplify >> thermal/drivers/intel: Use generic thermal_zone_get_trip() function > > I've tested this v8 patchset after fixing the issue with Exynos TMU with > https://lore.kernel.org/all/20221003132943.1383065-1-daniel.lezcano@linaro.org/ > patch and I got the following lockdep warning on all Exynos-based boards: > > ====================================================== > WARNING: possible circular locking dependency detected > 6.0.0-rc1-00083-ge5c9d117223e #12945 Not tainted > ------------------------------------------------------ > swapper/0/1 is trying to acquire lock: > c1ce66b0 (&data->lock#2){+.+.}-{3:3}, at: exynos_get_temp+0x3c/0xc8 > > but task is already holding lock: > c2979b94 (&tz->lock){+.+.}-{3:3}, at: > thermal_zone_device_update.part.0+0x3c/0x528 > > which lock already depends on the new lock. Investigating ...
On 03/10/2022 16:10, Marek Szyprowski wrote: > Hi Daniel, > > On 03.10.2022 11:25, Daniel Lezcano wrote: >> This work is the pre-requisite of handling correctly when the trip >> point are crossed. For that we need to rework how the trip points are >> declared and assigned to a thermal zone. >> >> Even if it appears to be a common sense to have the trip points being >> ordered, this no guarantee neither documentation telling that is the >> case. >> >> One solution could have been to create an ordered array of trips built >> when registering the thermal zone by calling the different get_trip* >> ops. However those ops receive a thermal zone pointer which is not >> known as it is in the process of creating it. >> >> This cyclic dependency shows we have to rework how we manage the trip >> points. >> >> Actually, all the trip points definition can be common to the backend >> sensor drivers and we can factor out the thermal trip structure in all >> of them. >> >> Then, as we register the thermal trips array, they will be available >> in the thermal zone structure and a core function can return the trip >> given its id. >> >> The get_trip_* ops won't be needed anymore and could be removed. The >> resulting code will be another step forward to a self encapsulated >> generic thermal framework. >> >> Most of the drivers can be converted more or less easily. This series >> does a first round with most of the drivers. Some remain and will be >> converted but with a smaller set of changes as the conversion is a bit >> more complex. >> >> Changelog: >> v8: >> - Pretty oneline change and parenthesis removal (Rafael) >> - Collected tags >> v7: >> - Added missing return 0 in the x86_pkg_temp driver >> v6: >> - Improved the code for the get_crit_temp() function as suggested by >> Rafael >> - Removed inner parenthesis in the set_trip_temp() function and invert the >> conditions. Check the type of the trip point is unchanged >> - Folded patch 4 with 1 >> - Add per thermal zone info message in the bang-bang governor >> - Folded the fix for an uninitialized variable in >> int340x_thermal_zone_add() >> v5: >> - Fixed a deadlock when calling thermal_zone_get_trip() while >> handling the thermal zone lock >> - Remove an extra line in the sysfs change >> - Collected tags >> v4: >> - Remove extra lines on exynos changes as reported by Krzysztof Kozlowski >> - Collected tags >> v3: >> - Reorg the series to be git-bisect safe >> - Added the set_trip generic function >> - Added the get_crit_temp generic function >> - Removed more dead code in the thermal-of >> - Fixed the exynos changelog >> - Fixed the error check for the exynos drivers >> - Collected tags >> v2: >> - Added missing EXPORT_SYMBOL_GPL() for thermal_zone_get_trip() >> - Removed tab whitespace in the acerhdf driver >> - Collected tags >> >> Cc: Raju Rangoju <rajur@chelsio.com> >> Cc: "David S. Miller" <davem@davemloft.net> >> Cc: Eric Dumazet <edumazet@google.com> >> Cc: Jakub Kicinski <kuba@kernel.org> >> Cc: Paolo Abeni <pabeni@redhat.com> >> Cc: Peter Kaestle <peter@piie.net> >> Cc: Hans de Goede <hdegoede@redhat.com> >> Cc: Mark Gross <markgross@kernel.org> >> Cc: Miquel Raynal <miquel.raynal@bootlin.com> >> Cc: "Rafael J. Wysocki" <rafael@kernel.org> >> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> >> Cc: Amit Kucheria <amitk@kernel.org> >> Cc: Zhang Rui <rui.zhang@intel.com> >> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> >> Cc: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com> >> Cc: Florian Fainelli <f.fainelli@gmail.com> >> Cc: Ray Jui <rjui@broadcom.com> >> Cc: Scott Branden <sbranden@broadcom.com> >> Cc: Support Opensource <support.opensource@diasemi.com> >> Cc: Lukasz Luba <lukasz.luba@arm.com> >> Cc: Shawn Guo <shawnguo@kernel.org> >> Cc: Sascha Hauer <s.hauer@pengutronix.de> >> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> >> Cc: Fabio Estevam <festevam@gmail.com> >> Cc: NXP Linux Team <linux-imx@nxp.com> >> Cc: Thara Gopinath <thara.gopinath@linaro.org> >> Cc: Andy Gross <agross@kernel.org> >> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> >> Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se> >> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> >> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >> Cc: Alim Akhtar <alim.akhtar@samsung.com> >> Cc: Thierry Reding <thierry.reding@gmail.com> >> Cc: Jonathan Hunter <jonathanh@nvidia.com> >> Cc: Eduardo Valentin <edubezval@gmail.com> >> Cc: Keerthy <j-keerthy@ti.com> >> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> >> Cc: Masami Hiramatsu <mhiramat@kernel.org> >> Cc: Antoine Tenart <atenart@kernel.org> >> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> >> Cc: Dmitry Osipenko <digetx@gmail.com> >> Cc: netdev@vger.kernel.org >> Cc: linux-kernel@vger.kernel.org >> Cc: platform-driver-x86@vger.kernel.org >> Cc: linux-pm@vger.kernel.org >> Cc: linux-rpi-kernel@lists.infradead.org >> Cc: linux-arm-kernel@lists.infradead.org >> Cc: linux-arm-msm@vger.kernel.org >> Cc: linux-renesas-soc@vger.kernel.org >> Cc: linux-samsung-soc@vger.kernel.org >> Cc: linux-tegra@vger.kernel.org >> Cc: linux-omap@vger.kernel.org >> >> Daniel Lezcano (29): >> thermal/core: Add a generic thermal_zone_get_trip() function >> thermal/sysfs: Always expose hysteresis attributes >> thermal/core: Add a generic thermal_zone_set_trip() function >> thermal/core/governors: Use thermal_zone_get_trip() instead of ops >> functions >> thermal/of: Use generic thermal_zone_get_trip() function >> thermal/of: Remove unused functions >> thermal/drivers/exynos: Use generic thermal_zone_get_trip() function >> thermal/drivers/exynos: of_thermal_get_ntrips() >> thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by >> thermal_zone_get_trip() >> thermal/drivers/tegra: Use generic thermal_zone_get_trip() function >> thermal/drivers/uniphier: Use generic thermal_zone_get_trip() function >> thermal/drivers/hisi: Use generic thermal_zone_get_trip() function >> thermal/drivers/qcom: Use generic thermal_zone_get_trip() function >> thermal/drivers/armada: Use generic thermal_zone_get_trip() function >> thermal/drivers/rcar_gen3: Use the generic function to get the number >> of trips >> thermal/of: Remove of_thermal_get_ntrips() >> thermal/of: Remove of_thermal_is_trip_valid() >> thermal/of: Remove of_thermal_set_trip_hyst() >> thermal/of: Remove of_thermal_get_crit_temp() >> thermal/drivers/st: Use generic trip points >> thermal/drivers/imx: Use generic thermal_zone_get_trip() function >> thermal/drivers/rcar: Use generic thermal_zone_get_trip() function >> thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function >> thermal/drivers/da9062: Use generic thermal_zone_get_trip() function >> thermal/drivers/ti: Remove unused macros ti_thermal_get_trip_value() / >> ti_thermal_trip_is_valid() >> thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function >> thermal/drivers/cxgb4: Use generic thermal_zone_get_trip() function >> thermal/intel/int340x: Replace parameter to simplify >> thermal/drivers/intel: Use generic thermal_zone_get_trip() function > > I've tested this v8 patchset after fixing the issue with Exynos TMU with > https://lore.kernel.org/all/20221003132943.1383065-1-daniel.lezcano@linaro.org/ > patch and I got the following lockdep warning on all Exynos-based boards: > > > ====================================================== > WARNING: possible circular locking dependency detected > 6.0.0-rc1-00083-ge5c9d117223e #12945 Not tainted > ------------------------------------------------------ > swapper/0/1 is trying to acquire lock: > c1ce66b0 (&data->lock#2){+.+.}-{3:3}, at: exynos_get_temp+0x3c/0xc8 > > but task is already holding lock: > c2979b94 (&tz->lock){+.+.}-{3:3}, at: > thermal_zone_device_update.part.0+0x3c/0x528 > > which lock already depends on the new lock. I'm wondering if the problem is not already there and related to data->lock ... Doesn't the thermal zone lock already prevent racy access to the data structure? Another question: if the sensor clock is disabled after reading it, how does the hardware update the temperature and detect the programed threshold is crossed? > the existing dependency chain (in reverse order) is: > > -> #1 (&tz->lock){+.+.}-{3:3}: > mutex_lock_nested+0x1c/0x24 > thermal_zone_get_trip+0x20/0x44 > exynos_tmu_initialize+0x144/0x1e0 > exynos_tmu_probe+0x2b0/0x728 > platform_probe+0x5c/0xb8 > really_probe+0xe0/0x414 > __driver_probe_device+0xa0/0x208 > driver_probe_device+0x30/0xc0 > __driver_attach+0xf0/0x1f0 > bus_for_each_dev+0x70/0xb0 > bus_add_driver+0x174/0x218 > driver_register+0x88/0x11c > do_one_initcall+0x64/0x380 > kernel_init_freeable+0x1c0/0x224 > kernel_init+0x18/0x12c > ret_from_fork+0x14/0x2c > 0x0 > > -> #0 (&data->lock#2){+.+.}-{3:3}: > lock_acquire+0x124/0x3e4 > __mutex_lock+0x90/0x948 > mutex_lock_nested+0x1c/0x24 > exynos_get_temp+0x3c/0xc8 > __thermal_zone_get_temp+0x5c/0x12c > thermal_zone_device_update.part.0+0x78/0x528 > __thermal_cooling_device_register.part.0+0x298/0x354 > __cpufreq_cooling_register.constprop.0+0x138/0x218 > of_cpufreq_cooling_register+0x48/0x8c > cpufreq_online+0x8d0/0xb2c > cpufreq_add_dev+0xb0/0xec > subsys_interface_register+0x108/0x118 > cpufreq_register_driver+0x15c/0x380 > dt_cpufreq_probe+0x2e4/0x434 > platform_probe+0x5c/0xb8 > really_probe+0xe0/0x414 > __driver_probe_device+0xa0/0x208 > driver_probe_device+0x30/0xc0 > __driver_attach+0xf0/0x1f0 > bus_for_each_dev+0x70/0xb0 > bus_add_driver+0x174/0x218 > driver_register+0x88/0x11c > do_one_initcall+0x64/0x380 > kernel_init_freeable+0x1c0/0x224 > kernel_init+0x18/0x12c > ret_from_fork+0x14/0x2c > 0x0 > > other info that might help us debug this: > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(&tz->lock); > lock(&data->lock#2); > lock(&tz->lock); > lock(&data->lock#2); > > *** DEADLOCK *** > > 5 locks held by swapper/0/1: > #0: c1c8648c (&dev->mutex){....}-{3:3}, at: __driver_attach+0xe4/0x1f0 > #1: c1210434 (cpu_hotplug_lock){++++}-{0:0}, at: > cpufreq_register_driver+0xc4/0x380 > #2: c1ed8298 (subsys mutex#8){+.+.}-{3:3}, at: > subsys_interface_register+0x4c/0x118 > #3: c131f944 (thermal_list_lock){+.+.}-{3:3}, at: > __thermal_cooling_device_register.part.0+0x238/0x354 > #4: c2979b94 (&tz->lock){+.+.}-{3:3}, at: > thermal_zone_device_update.part.0+0x3c/0x528 > > stack backtrace: > CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc1-00083-ge5c9d117223e > #12945 > Hardware name: Samsung Exynos (Flattened Device Tree) > unwind_backtrace from show_stack+0x10/0x14 > show_stack from dump_stack_lvl+0x58/0x70 > dump_stack_lvl from check_noncircular+0xf0/0x158 > check_noncircular from __lock_acquire+0x15e8/0x2a7c > __lock_acquire from lock_acquire+0x124/0x3e4 > lock_acquire from __mutex_lock+0x90/0x948 > __mutex_lock from mutex_lock_nested+0x1c/0x24 > mutex_lock_nested from exynos_get_temp+0x3c/0xc8 > exynos_get_temp from __thermal_zone_get_temp+0x5c/0x12c > __thermal_zone_get_temp from thermal_zone_device_update.part.0+0x78/0x528 > thermal_zone_device_update.part.0 from > __thermal_cooling_device_register.part.0+0x298/0x354 > __thermal_cooling_device_register.part.0 from > __cpufreq_cooling_register.constprop.0+0x138/0x218 > __cpufreq_cooling_register.constprop.0 from > of_cpufreq_cooling_register+0x48/0x8c > of_cpufreq_cooling_register from cpufreq_online+0x8d0/0xb2c > cpufreq_online from cpufreq_add_dev+0xb0/0xec > cpufreq_add_dev from subsys_interface_register+0x108/0x118 > subsys_interface_register from cpufreq_register_driver+0x15c/0x380 > cpufreq_register_driver from dt_cpufreq_probe+0x2e4/0x434 > dt_cpufreq_probe from platform_probe+0x5c/0xb8 > platform_probe from really_probe+0xe0/0x414 > really_probe from __driver_probe_device+0xa0/0x208 > __driver_probe_device from driver_probe_device+0x30/0xc0 > driver_probe_device from __driver_attach+0xf0/0x1f0 > __driver_attach from bus_for_each_dev+0x70/0xb0 > bus_for_each_dev from bus_add_driver+0x174/0x218 > bus_add_driver from driver_register+0x88/0x11c > driver_register from do_one_initcall+0x64/0x380 > do_one_initcall from kernel_init_freeable+0x1c0/0x224 > kernel_init_freeable from kernel_init+0x18/0x12c > kernel_init from ret_from_fork+0x14/0x2c > Exception stack(0xf082dfb0 to 0xf082dff8) > ... > > Let me know if You need anything more to test. > > >> drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 2 - >> .../ethernet/chelsio/cxgb4/cxgb4_thermal.c | 41 +---- >> drivers/platform/x86/acerhdf.c | 73 +++----- >> drivers/thermal/armada_thermal.c | 39 ++--- >> drivers/thermal/broadcom/bcm2835_thermal.c | 8 +- >> drivers/thermal/da9062-thermal.c | 52 +----- >> drivers/thermal/gov_bang_bang.c | 39 +++-- >> drivers/thermal/gov_fair_share.c | 18 +- >> drivers/thermal/gov_power_allocator.c | 51 +++--- >> drivers/thermal/gov_step_wise.c | 22 ++- >> drivers/thermal/hisi_thermal.c | 11 +- >> drivers/thermal/imx_thermal.c | 72 +++----- >> .../int340x_thermal/int340x_thermal_zone.c | 33 ++-- >> .../int340x_thermal/int340x_thermal_zone.h | 4 +- >> .../processor_thermal_device.c | 10 +- >> drivers/thermal/intel/x86_pkg_temp_thermal.c | 120 +++++++------ >> drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 39 ++--- >> drivers/thermal/rcar_gen3_thermal.c | 2 +- >> drivers/thermal/rcar_thermal.c | 53 +----- >> drivers/thermal/samsung/exynos_tmu.c | 57 +++---- >> drivers/thermal/st/st_thermal.c | 47 +---- >> drivers/thermal/tegra/soctherm.c | 33 ++-- >> drivers/thermal/tegra/tegra30-tsensor.c | 17 +- >> drivers/thermal/thermal_core.c | 160 +++++++++++++++--- >> drivers/thermal/thermal_core.h | 24 +-- >> drivers/thermal/thermal_helpers.c | 28 +-- >> drivers/thermal/thermal_netlink.c | 21 +-- >> drivers/thermal/thermal_of.c | 116 ------------- >> drivers/thermal/thermal_sysfs.c | 133 +++++---------- >> drivers/thermal/ti-soc-thermal/ti-thermal.h | 15 -- >> drivers/thermal/uniphier_thermal.c | 27 ++- >> include/linux/thermal.h | 10 ++ >> 32 files changed, 559 insertions(+), 818 deletions(-) >> > Best regards >
Hi Marek, On 03/10/2022 23:18, Daniel Lezcano wrote: [ ... ] >> I've tested this v8 patchset after fixing the issue with Exynos TMU with >> https://lore.kernel.org/all/20221003132943.1383065-1-daniel.lezcano@linaro.org/ >> >> patch and I got the following lockdep warning on all Exynos-based boards: >> >> >> ====================================================== >> WARNING: possible circular locking dependency detected >> 6.0.0-rc1-00083-ge5c9d117223e #12945 Not tainted >> ------------------------------------------------------ >> swapper/0/1 is trying to acquire lock: >> c1ce66b0 (&data->lock#2){+.+.}-{3:3}, at: exynos_get_temp+0x3c/0xc8 >> >> but task is already holding lock: >> c2979b94 (&tz->lock){+.+.}-{3:3}, at: >> thermal_zone_device_update.part.0+0x3c/0x528 >> >> which lock already depends on the new lock. > > I'm wondering if the problem is not already there and related to > data->lock ... > > Doesn't the thermal zone lock already prevent racy access to the data > structure? > > Another question: if the sensor clock is disabled after reading it, how > does the hardware update the temperature and detect the programed > threshold is crossed? just a gentle ping, as the fix will depend on your answer ;) Thanks -- D. [ ... ]
On 05.10.2022 14:37, Daniel Lezcano wrote: > > Hi Marek, > > On 03/10/2022 23:18, Daniel Lezcano wrote: > > [ ... ] > >>> I've tested this v8 patchset after fixing the issue with Exynos TMU >>> with >>> https://lore.kernel.org/all/20221003132943.1383065-1-daniel.lezcano@linaro.org/ >>> >>> patch and I got the following lockdep warning on all Exynos-based >>> boards: >>> >>> >>> ====================================================== >>> WARNING: possible circular locking dependency detected >>> 6.0.0-rc1-00083-ge5c9d117223e #12945 Not tainted >>> ------------------------------------------------------ >>> swapper/0/1 is trying to acquire lock: >>> c1ce66b0 (&data->lock#2){+.+.}-{3:3}, at: exynos_get_temp+0x3c/0xc8 >>> >>> but task is already holding lock: >>> c2979b94 (&tz->lock){+.+.}-{3:3}, at: >>> thermal_zone_device_update.part.0+0x3c/0x528 >>> >>> which lock already depends on the new lock. >> >> I'm wondering if the problem is not already there and related to >> data->lock ... >> >> Doesn't the thermal zone lock already prevent racy access to the data >> structure? >> >> Another question: if the sensor clock is disabled after reading it, >> how does the hardware update the temperature and detect the programed >> threshold is crossed? > > just a gentle ping, as the fix will depend on your answer ;) > Sorry, I've been busy with other stuff. I thought I will fix this once I find a bit of spare time. IMHO the clock management is a bit over-engineered, as there is little (if any) benefit from such fine grade clock management. That clock is needed only for the AHB related part of the TMU (reading/writing the registers). The IRQ generation and temperature measurement is clocked from so called 'sclk' (special clock). I also briefly looked at the code and the internal lock doesn't look to be really necessary assuming that the thermal core already serializes all the calls. Best regards
Hi Marek, On 05/10/2022 15:05, Marek Szyprowski wrote: > > On 05.10.2022 14:37, Daniel Lezcano wrote: >> >> Hi Marek, >> >> On 03/10/2022 23:18, Daniel Lezcano wrote: >> >> [ ... ] >> >>>> I've tested this v8 patchset after fixing the issue with Exynos TMU >>>> with >>>> https://lore.kernel.org/all/20221003132943.1383065-1-daniel.lezcano@linaro.org/ >>>> >>>> patch and I got the following lockdep warning on all Exynos-based >>>> boards: >>>> >>>> >>>> ====================================================== >>>> WARNING: possible circular locking dependency detected >>>> 6.0.0-rc1-00083-ge5c9d117223e #12945 Not tainted >>>> ------------------------------------------------------ >>>> swapper/0/1 is trying to acquire lock: >>>> c1ce66b0 (&data->lock#2){+.+.}-{3:3}, at: exynos_get_temp+0x3c/0xc8 >>>> >>>> but task is already holding lock: >>>> c2979b94 (&tz->lock){+.+.}-{3:3}, at: >>>> thermal_zone_device_update.part.0+0x3c/0x528 >>>> >>>> which lock already depends on the new lock. >>> >>> I'm wondering if the problem is not already there and related to >>> data->lock ... >>> >>> Doesn't the thermal zone lock already prevent racy access to the data >>> structure? >>> >>> Another question: if the sensor clock is disabled after reading it, >>> how does the hardware update the temperature and detect the programed >>> threshold is crossed? >> >> just a gentle ping, as the fix will depend on your answer ;) >> > Sorry, I've been busy with other stuff. I thought I will fix this once I > find a bit of spare time. Ok, that is great if you can find time to fix it up because I've other drivers to convert to the generic thermal trips. > IMHO the clock management is a bit over-engineered, as there is little > (if any) benefit from such fine grade clock management. That clock is > needed only for the AHB related part of the TMU (reading/writing the > registers). The IRQ generation and temperature measurement is clocked > from so called 'sclk' (special clock). > > I also briefly looked at the code and the internal lock doesn't look to > be really necessary assuming that the thermal core already serializes > all the calls. I looked at the code and I think the driver can be simplified (fixed?) even more. IIUC, the sensor has multiple trip point interrupts, so if the device tree is describing more trip points than the sensor supports, there is a warning and the number of trip point is capped. IMO that can be simplified by using two trip point interrupt because the thermal_zone_device_update() will call the set_trips callback with the new boundaries. IOW, the thermal framework sets a new trip point interrupt when one is crossed. That should result in the simplification of the tmu_control as well as the tmu_probe function. As well as removing the limitation of the number of trip points. In order to have that correctly working, the 'set_trips' ops must be used to call the tmu_control callback instead of calling it in tmu_probe. The intialization workflow should be: probe->... ->thermal_zone_device_register() ->thermal_zone_device_update() ->update_trip_points() ->ops->set_trips() ->tmu_control() Also, replace the workqueue by a threaded interrupt. Does it make sense?
Hi Daniel, On 06.10.2022 08:55, Daniel Lezcano wrote: > > On 05/10/2022 15:05, Marek Szyprowski wrote: >> >> On 05.10.2022 14:37, Daniel Lezcano wrote: >>> >>> On 03/10/2022 23:18, Daniel Lezcano wrote: >>> >>> [ ... ] >>> >>>>> I've tested this v8 patchset after fixing the issue with Exynos TMU >>>>> with >>>>> https://lore.kernel.org/all/20221003132943.1383065-1-daniel.lezcano@linaro.org/ >>>>> >>>>> >>>>> patch and I got the following lockdep warning on all Exynos-based >>>>> boards: >>>>> >>>>> >>>>> ====================================================== >>>>> WARNING: possible circular locking dependency detected >>>>> 6.0.0-rc1-00083-ge5c9d117223e #12945 Not tainted >>>>> ------------------------------------------------------ >>>>> swapper/0/1 is trying to acquire lock: >>>>> c1ce66b0 (&data->lock#2){+.+.}-{3:3}, at: exynos_get_temp+0x3c/0xc8 >>>>> >>>>> but task is already holding lock: >>>>> c2979b94 (&tz->lock){+.+.}-{3:3}, at: >>>>> thermal_zone_device_update.part.0+0x3c/0x528 >>>>> >>>>> which lock already depends on the new lock. >>>> >>>> I'm wondering if the problem is not already there and related to >>>> data->lock ... >>>> >>>> Doesn't the thermal zone lock already prevent racy access to the data >>>> structure? >>>> >>>> Another question: if the sensor clock is disabled after reading it, >>>> how does the hardware update the temperature and detect the programed >>>> threshold is crossed? >>> >>> just a gentle ping, as the fix will depend on your answer ;) >>> >> Sorry, I've been busy with other stuff. I thought I will fix this once I >> find a bit of spare time. > > Ok, that is great if you can find time to fix it up because I've other > drivers to convert to the generic thermal trips. > > >> IMHO the clock management is a bit over-engineered, as there is little >> (if any) benefit from such fine grade clock management. That clock is >> needed only for the AHB related part of the TMU (reading/writing the >> registers). The IRQ generation and temperature measurement is clocked >> from so called 'sclk' (special clock). >> >> I also briefly looked at the code and the internal lock doesn't look to >> be really necessary assuming that the thermal core already serializes >> all the calls. > > I looked at the code and I think the driver can be simplified (fixed?) > even more. > > IIUC, the sensor has multiple trip point interrupts, so if the device > tree is describing more trip points than the sensor supports, there is > a warning and the number of trip point is capped. > > IMO that can be simplified by using two trip point interrupt because > the thermal_zone_device_update() will call the set_trips callback with > the new boundaries. IOW, the thermal framework sets a new trip point > interrupt when one is crossed. > > That should result in the simplification of the tmu_control as well as > the tmu_probe function. As well as removing the limitation of the > number of trip points. > > In order to have that correctly working, the 'set_trips' ops must be > used to call the tmu_control callback instead of calling it in tmu_probe. > > The intialization workflow should be: > > probe->... > ->thermal_zone_device_register() > ->thermal_zone_device_update() > ->update_trip_points() > ->ops->set_trips() > ->tmu_control() > > Also, replace the workqueue by a threaded interrupt. > > Does it make sense? Yes, definitely. Frankly speaking I've never looked into that code, so I was not aware that it needs some cleanup. Best regards
This work is the pre-requisite of handling correctly when the trip point are crossed. For that we need to rework how the trip points are declared and assigned to a thermal zone. Even if it appears to be a common sense to have the trip points being ordered, this no guarantee neither documentation telling that is the case. One solution could have been to create an ordered array of trips built when registering the thermal zone by calling the different get_trip* ops. However those ops receive a thermal zone pointer which is not known as it is in the process of creating it. This cyclic dependency shows we have to rework how we manage the trip points. Actually, all the trip points definition can be common to the backend sensor drivers and we can factor out the thermal trip structure in all of them. Then, as we register the thermal trips array, they will be available in the thermal zone structure and a core function can return the trip given its id. The get_trip_* ops won't be needed anymore and could be removed. The resulting code will be another step forward to a self encapsulated generic thermal framework. Most of the drivers can be converted more or less easily. This series does a first round with most of the drivers. Some remain and will be converted but with a smaller set of changes as the conversion is a bit more complex. Changelog: v8: - Pretty oneline change and parenthesis removal (Rafael) - Collected tags v7: - Added missing return 0 in the x86_pkg_temp driver v6: - Improved the code for the get_crit_temp() function as suggested by Rafael - Removed inner parenthesis in the set_trip_temp() function and invert the conditions. Check the type of the trip point is unchanged - Folded patch 4 with 1 - Add per thermal zone info message in the bang-bang governor - Folded the fix for an uninitialized variable in int340x_thermal_zone_add() v5: - Fixed a deadlock when calling thermal_zone_get_trip() while handling the thermal zone lock - Remove an extra line in the sysfs change - Collected tags v4: - Remove extra lines on exynos changes as reported by Krzysztof Kozlowski - Collected tags v3: - Reorg the series to be git-bisect safe - Added the set_trip generic function - Added the get_crit_temp generic function - Removed more dead code in the thermal-of - Fixed the exynos changelog - Fixed the error check for the exynos drivers - Collected tags v2: - Added missing EXPORT_SYMBOL_GPL() for thermal_zone_get_trip() - Removed tab whitespace in the acerhdf driver - Collected tags Cc: Raju Rangoju <rajur@chelsio.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Peter Kaestle <peter@piie.net> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Gross <markgross@kernel.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Amit Kucheria <amitk@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Support Opensource <support.opensource@diasemi.com> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Thara Gopinath <thara.gopinath@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Antoine Tenart <atenart@kernel.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Dmitry Osipenko <digetx@gmail.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-omap@vger.kernel.org Daniel Lezcano (29): thermal/core: Add a generic thermal_zone_get_trip() function thermal/sysfs: Always expose hysteresis attributes thermal/core: Add a generic thermal_zone_set_trip() function thermal/core/governors: Use thermal_zone_get_trip() instead of ops functions thermal/of: Use generic thermal_zone_get_trip() function thermal/of: Remove unused functions thermal/drivers/exynos: Use generic thermal_zone_get_trip() function thermal/drivers/exynos: of_thermal_get_ntrips() thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by thermal_zone_get_trip() thermal/drivers/tegra: Use generic thermal_zone_get_trip() function thermal/drivers/uniphier: Use generic thermal_zone_get_trip() function thermal/drivers/hisi: Use generic thermal_zone_get_trip() function thermal/drivers/qcom: Use generic thermal_zone_get_trip() function thermal/drivers/armada: Use generic thermal_zone_get_trip() function thermal/drivers/rcar_gen3: Use the generic function to get the number of trips thermal/of: Remove of_thermal_get_ntrips() thermal/of: Remove of_thermal_is_trip_valid() thermal/of: Remove of_thermal_set_trip_hyst() thermal/of: Remove of_thermal_get_crit_temp() thermal/drivers/st: Use generic trip points thermal/drivers/imx: Use generic thermal_zone_get_trip() function thermal/drivers/rcar: Use generic thermal_zone_get_trip() function thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function thermal/drivers/da9062: Use generic thermal_zone_get_trip() function thermal/drivers/ti: Remove unused macros ti_thermal_get_trip_value() / ti_thermal_trip_is_valid() thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function thermal/drivers/cxgb4: Use generic thermal_zone_get_trip() function thermal/intel/int340x: Replace parameter to simplify thermal/drivers/intel: Use generic thermal_zone_get_trip() function drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 2 - .../ethernet/chelsio/cxgb4/cxgb4_thermal.c | 41 +---- drivers/platform/x86/acerhdf.c | 73 +++----- drivers/thermal/armada_thermal.c | 39 ++--- drivers/thermal/broadcom/bcm2835_thermal.c | 8 +- drivers/thermal/da9062-thermal.c | 52 +----- drivers/thermal/gov_bang_bang.c | 39 +++-- drivers/thermal/gov_fair_share.c | 18 +- drivers/thermal/gov_power_allocator.c | 51 +++--- drivers/thermal/gov_step_wise.c | 22 ++- drivers/thermal/hisi_thermal.c | 11 +- drivers/thermal/imx_thermal.c | 72 +++----- .../int340x_thermal/int340x_thermal_zone.c | 33 ++-- .../int340x_thermal/int340x_thermal_zone.h | 4 +- .../processor_thermal_device.c | 10 +- drivers/thermal/intel/x86_pkg_temp_thermal.c | 120 +++++++------ drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 39 ++--- drivers/thermal/rcar_gen3_thermal.c | 2 +- drivers/thermal/rcar_thermal.c | 53 +----- drivers/thermal/samsung/exynos_tmu.c | 57 +++---- drivers/thermal/st/st_thermal.c | 47 +---- drivers/thermal/tegra/soctherm.c | 33 ++-- drivers/thermal/tegra/tegra30-tsensor.c | 17 +- drivers/thermal/thermal_core.c | 160 +++++++++++++++--- drivers/thermal/thermal_core.h | 24 +-- drivers/thermal/thermal_helpers.c | 28 +-- drivers/thermal/thermal_netlink.c | 21 +-- drivers/thermal/thermal_of.c | 116 ------------- drivers/thermal/thermal_sysfs.c | 133 +++++---------- drivers/thermal/ti-soc-thermal/ti-thermal.h | 15 -- drivers/thermal/uniphier_thermal.c | 27 ++- include/linux/thermal.h | 10 ++ 32 files changed, 559 insertions(+), 818 deletions(-)