diff mbox series

[4/5] ARM: dts: exynos: Add status property to Exynos 5250 HDMI and Mixer nodes

Message ID 1505466683-32148-5-git-send-email-m.szyprowski@samsung.com
State New
Headers show
Series Exynos HDMI bindings cleanup | expand

Commit Message

Marek Szyprowski Sept. 15, 2017, 9:11 a.m. UTC 
HDMI support requires some additional off-SoC logic, so HDMI and Mixer
devices should be disabled by default in  SoC dtsi and enabled then
in each board dts. This patch unifies HDMI and Mixer handling with other
Exynos SoCs.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

---
 arch/arm/boot/dts/exynos5250-arndale.dts      | 5 +++++
 arch/arm/boot/dts/exynos5250-smdk5250.dts     | 5 +++++
 arch/arm/boot/dts/exynos5250-snow-common.dtsi | 5 +++++
 arch/arm/boot/dts/exynos5250-spring.dts       | 5 +++++
 arch/arm/boot/dts/exynos5250.dtsi             | 4 +++-
 5 files changed, 23 insertions(+), 1 deletion(-)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index a380cff466ae..0efd678b8251 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -152,6 +152,7 @@ 
 };
 
 &hdmi {
+	status = "okay";
 	ddc = <&i2c_2>;
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>;
 	vdd_osc-supply = <&ldo10_reg>;
@@ -505,6 +506,10 @@ 
 	status = "okay";
 };
 
+&mixer {
+	status = "okay";
+};
+
 &mmc_0 {
 	status = "okay";
 	broken-cd;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 1330ded91445..e98e62c1216c 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -116,6 +116,7 @@ 
 };
 
 &hdmi {
+	status = "okay";
 	ddc = <&i2c_2>;
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 };
@@ -337,6 +338,10 @@ 
 	status = "okay";
 };
 
+&mixer {
+	status = "okay";
+};
+
 &mmc_0 {
 	status = "okay";
 	broken-cd;
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 88a8656ca7b3..11e6cfdc0f68 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -261,6 +261,7 @@ 
 };
 
 &hdmi {
+	status = "okay";
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
@@ -518,6 +519,10 @@ 
 	status = "okay";
 };
 
+&mixer {
+	status = "okay";
+};
+
 /* eMMC flash */
 &mmc_0 {
 	status = "okay";
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index b3cc22568033..47dbc50546c1 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -91,6 +91,7 @@ 
 };
 
 &hdmi {
+	status = "okay";
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
@@ -416,6 +417,10 @@ 
 	status = "okay";
 };
 
+&mixer {
+	status = "okay";
+};
+
 &mmc_0 {
 	status = "okay";
 	broken-cd;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 995230685ac8..f371f929d700 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -693,6 +693,7 @@ 
 					"sclk_hdmiphy", "mout_hdmi";
 			samsung,syscon-phandle = <&pmu_system_controller>;
 			phy = <&hdmiphy>;
+			status = "disabled";
 		};
 
 		hdmicec: cec@101B0000 {
@@ -708,7 +709,7 @@ 
 			status = "disabled";
 		};
 
-		mixer@14450000 {
+		mixer: mixer@14450000 {
 			compatible = "samsung,exynos5250-mixer";
 			reg = <0x14450000 0x10000>;
 			power-domains = <&pd_disp1>;
@@ -717,6 +718,7 @@ 
 				 <&clock CLK_SCLK_HDMI>;
 			clock-names = "mixer", "hdmi", "sclk_hdmi";
 			iommus = <&sysmmu_tv>;
+			status = "disabled";
 		};
 
 		dp_phy: video-phy {