@@ -50,6 +50,11 @@
};
};
+ wlan_pwrseq: mshc1-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+ };
+
i2c_max77836: i2c-gpio-0 {
compatible = "i2c-gpio";
gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
@@ -625,6 +630,37 @@
status = "okay";
};
+&mshc_1 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ broken-cd;
+ non-removable;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <1>;
+ samsung,dw-mshc-sdr-timing = <0 1>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+ bus-width = <4>;
+
+ mmc-pwrseq = <&wlan_pwrseq>;
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4334-fmac";
+ reg = <1>;
+
+ interrupt-parent = <&gpx1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ };
+};
+
&serial_0 {
assigned-clocks = <&cmu CLK_SCLK_UART0>;
assigned-clock-rates = <100000000>;
Add a node for BCM43342A SDIO chip on MSHC bus #1 and the required MMC power sequence node for the Exynos3250-based Rinato board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- arch/arm/boot/dts/exynos3250-rinato.dts | 36 +++++++++++++++++++++++++ 1 file changed, 36 insertions(+)