diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index 63933029ffa7..48a5b84feaea 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -133,11 +133,27 @@
 
 /* Exynos850: USB DRD PHY registers */
 #define EXYNOS850_DRD_LINKCTRL			0x04
+#define LINKCTRL_FORCE_RXELECIDLE		BIT(18)
+#define LINKCTRL_FORCE_PHYSTATUS		BIT(17)
+#define LINKCTRL_FORCE_PIPE_EN			BIT(16)
 #define LINKCTRL_FORCE_QACT			BIT(8)
 #define LINKCTRL_BUS_FILTER_BYPASS(_x)		((_x) << 4)
 
+#define EXYNOS850_DRD_LINKPORT			0x08
+#define LINKPORT_HOST_NUM_U3			GENMASK(19, 16)
+#define LINKPORT_HOST_NUM_U2			GENMASK(15, 12)
+
 #define EXYNOS850_DRD_CLKRST			0x20
+/*
+ * On versions without SS ports (like E850), bit 3 is for the 2.0 phy (HS),
+ * while on versions with (like gs101), bits 2 and 3 are for the 3.0 phy (SS)
+ * and bits 12 & 13 for the 2.0 phy.
+ */
+#define CLKRST_PHY20_SW_POR			BIT(13)
+#define CLKRST_PHY20_SW_POR_SEL			BIT(12)
+#define CLKRST_LINK_PCLK_SEL			BIT(7)
 #define CLKRST_PHY_SW_RST			BIT(3)
+#define CLKRST_PHY_RESET_SEL			BIT(2)
 #define CLKRST_PORT_RST				BIT(1)
 #define CLKRST_LINK_SW_RST			BIT(0)
 
@@ -159,12 +175,173 @@
 #define HSP_EN_UTMISUSPEND			BIT(9)
 #define HSP_COMMONONN				BIT(8)
 
+#define EXYNOS850_DRD_HSPPARACON		0x58
+#define HSPPARACON_TXVREF			GENMASK(31, 28)
+#define HSPPARACON_TXRISE			GENMASK(25, 24)
+#define HSPPARACON_TXRES			GENMASK(22, 21)
+#define HSPPARACON_TXPREEMPPULSE		BIT(20)
+#define HSPPARACON_TXPREEMPAMP			GENMASK(19, 18)
+#define HSPPARACON_TXHSXV			GENMASK(17, 16)
+#define HSPPARACON_TXFSLS			GENMASK(15, 12)
+#define HSPPARACON_SQRX				GENMASK(10, 8)
+#define HSPPARACON_OTG				GENMASK(6, 4)
+#define HSPPARACON_COMPDIS			GENMASK(2, 0)
+
 #define EXYNOS850_DRD_HSP_TEST			0x5c
 #define HSP_TEST_SIDDQ				BIT(24)
 
+/* Exynos9 - GS101 */
+#define EXYNOS850_DRD_SECPMACTL			0x48
+#define SECPMACTL_PMA_ROPLL_REF_CLK_SEL		GENMASK(13, 12)
+#define SECPMACTL_PMA_LCPLL_REF_CLK_SEL		GENMASK(11, 10)
+#define SECPMACTL_PMA_REF_FREQ_SEL		GENMASK(9, 8)
+#define SECPMACTL_PMA_LOW_PWR			BIT(4)
+#define SECPMACTL_PMA_TRSV_SW_RST		BIT(3)
+#define SECPMACTL_PMA_CMN_SW_RST		BIT(2)
+#define SECPMACTL_PMA_INIT_SW_RST		BIT(1)
+#define SECPMACTL_PMA_APB_SW_RST		BIT(0)
+
+/* PMA registers */
+#define EXYNOS9_PMA_USBDP_CMN_REG0008		0x0020
+#define CMN_REG0008_OVRD_AUX_EN			BIT(3)
+#define CMN_REG0008_AUX_EN			BIT(2)
+
+#define EXYNOS9_PMA_USBDP_CMN_REG00B8		0x02e0
+#define CMN_REG00B8_LANE_MUX_SEL_DP		GENMASK(3, 0)
+
+#define EXYNOS9_PMA_USBDP_CMN_REG01C0		0x0700
+#define CMN_REG01C0_ANA_LCPLL_LOCK_DONE		BIT(7)
+#define CMN_REG01C0_ANA_LCPLL_AFC_DONE		BIT(6)
+
+/* these have similar register layout, for lanes 0 and 2 */
+#define EXYNOS9_PMA_USBDP_TRSV_REG03C3			0x0f0c
+#define EXYNOS9_PMA_USBDP_TRSV_REG07C3			0x1f0c
+#define TRSV_REG03C3_LN0_MON_RX_CDR_AFC_DONE		BIT(3)
+#define TRSV_REG03C3_LN0_MON_RX_CDR_CAL_DONE		BIT(2)
+#define TRSV_REG03C3_LN0_MON_RX_CDR_FLD_PLL_MODE_DONE	BIT(1)
+#define TRSV_REG03C3_LN0_MON_RX_CDR_LOCK_DONE		BIT(0)
+
+/* TRSV_REG0413 and TRSV_REG0813 have similar register layout */
+#define EXYNOS9_PMA_USBDP_TRSV_REG0413		0x104c
+#define TRSV_REG0413_OVRD_LN1_TX_RXD_COMP_EN	BIT(7)
+#define TRSV_REG0413_OVRD_LN1_TX_RXD_EN		BIT(5)
+
+#define EXYNOS9_PMA_USBDP_TRSV_REG0813		0x204c
+#define TRSV_REG0813_OVRD_LN3_TX_RXD_COMP_EN	BIT(7)
+#define TRSV_REG0813_OVRD_LN3_TX_RXD_EN		BIT(5)
+
+/* PCS registers */
+#define EXYNOS9_PCS_NS_VEC_PS1_N1		0x010c
+#define EXYNOS9_PCS_NS_VEC_PS2_N0		0x0110
+#define EXYNOS9_PCS_NS_VEC_PS3_N0		0x0118
+#define NS_VEC_NS_REQ				GENMASK(31, 24)
+#define NS_VEC_ENABLE_TIMER			BIT(22)
+#define NS_VEC_SEL_TIMEOUT			GENMASK(21, 20)
+#define NS_VEC_INV_MASK				GENMASK(19, 16)
+#define NS_VEC_COND_MASK			GENMASK(11, 8)
+#define NS_VEC_EXP_COND				GENMASK(3, 0)
+
+#define EXYNOS9_PCS_OUT_VEC_2			0x014c
+#define EXYNOS9_PCS_OUT_VEC_3			0x0150
+#define PCS_OUT_VEC_B9_DYNAMIC			BIT(19)
+#define PCS_OUT_VEC_B9_SEL_OUT			BIT(18)
+#define PCS_OUT_VEC_B8_DYNAMIC			BIT(17)
+#define PCS_OUT_VEC_B8_SEL_OUT			BIT(16)
+#define PCS_OUT_VEC_B7_DYNAMIC			BIT(15)
+#define PCS_OUT_VEC_B7_SEL_OUT			BIT(14)
+#define PCS_OUT_VEC_B6_DYNAMIC			BIT(13)
+#define PCS_OUT_VEC_B6_SEL_OUT			BIT(12)
+#define PCS_OUT_VEC_B5_DYNAMIC			BIT(11)
+#define PCS_OUT_VEC_B5_SEL_OUT			BIT(10)
+#define PCS_OUT_VEC_B4_DYNAMIC			BIT(9)
+#define PCS_OUT_VEC_B4_SEL_OUT			BIT(8)
+#define PCS_OUT_VEC_B3_DYNAMIC			BIT(7)
+#define PCS_OUT_VEC_B3_SEL_OUT			BIT(6)
+#define PCS_OUT_VEC_B2_DYNAMIC			BIT(5)
+#define PCS_OUT_VEC_B2_SEL_OUT			BIT(4)
+#define PCS_OUT_VEC_B1_DYNAMIC			BIT(3)
+#define PCS_OUT_VEC_B1_SEL_OUT			BIT(2)
+#define PCS_OUT_VEC_B0_DYNAMIC			BIT(1)
+#define PCS_OUT_VEC_B0_SEL_OUT			BIT(0)
+
+#define EXYNOS9_PCS_TIMEOUT_0			0x0170
+
+#define EXYNOS9_PCS_TIMEOUT_3			0x017c
+
+#define EXYNOS9_PCS_EBUF_PARAM			0x0304
+#define EBUF_PARAM_SKP_REMOVE_TH_EMPTY_MODE	GENMASK(29, 24)
+
+#define EXYNOS9_PCS_BACK_END_MODE_VEC		0x030c
+#define BACK_END_MODE_VEC_FORCE_EBUF_EMPTY_MODE	BIT(1)
+#define BACK_END_MODE_VEC_DISABLE_DATA_MASK	BIT(0)
+
+#define EXYNOS9_PCS_RX_CONTROL			0x03f0
+#define RX_CONTROL_EN_BLOCK_ALIGNER_TYPE_B	BIT(22)
+
+#define EXYNOS9_PCS_RX_CONTROL_DEBUG		0x03f4
+#define RX_CONTROL_DEBUG_EN_TS_CHECK		BIT(5)
+#define RX_CONTROL_DEBUG_NUM_COM_FOUND		GENMASK(3, 0)
+
+#define EXYNOS9_PCS_LOCAL_COEF			0x040c
+#define LOCAL_COEF_PMA_CENTER_COEF		GENMASK(21, 16)
+#define LOCAL_COEF_LF				GENMASK(13, 8)
+#define LOCAL_COEF_FS				GENMASK(5, 0)
+
+#define EXYNOS9_PCS_HS_TX_COEF_MAP_0		0x0410
+#define HS_TX_COEF_MAP_0_SSTX_DEEMP		GENMASK(17, 12)
+#define HS_TX_COEF_MAP_0_SSTX_LEVEL		GENMASK(11, 6)
+#define HS_TX_COEF_MAP_0_SSTX_PRE_SHOOT		GENMASK(5, 0)
+
+
 #define KHZ	1000
 #define MHZ	(KHZ * KHZ)
 
+#define PHY_TUNING_ENTRY_PHY(o, m, v) {	\
+		.off = (o),		\
+		.mask = (m),		\
+		.val = (v),		\
+		.region = PTR_PHY	\
+	}
+
+#define PHY_TUNING_ENTRY_PCS(o, m, v) {	\
+		.off = (o),		\
+		.mask = (m),		\
+		.val = (v),		\
+		.region = PTR_PCS	\
+	}
+
+#define PHY_TUNING_ENTRY_PMA(o, m, v) {	\
+		.off = (o),		\
+		.mask = (m),		\
+		.val = (v),		\
+		.region = PTR_PMA,	\
+	}
+
+#define PHY_TUNING_ENTRY_LAST { .region = PTR_INVALID }
+
+#define for_each_phy_tune(tune) \
+	for (; (tune)->region != PTR_INVALID; ++(tune))
+
+struct exynos5_usbdrd_phy_tuning {
+	u32 off;
+	u32 mask;
+	u32 val;
+	char region;
+#define PTR_INVALID	0
+#define PTR_PHY		1
+#define PTR_PCS		2
+#define PTR_PMA		3
+};
+
+enum exynos5_usbdrd_phy_tuning_state {
+	PTS_UTMI_POSTINIT,
+	PTS_PIPE3_PREINIT,
+	PTS_PIPE3_INIT,
+	PTS_PIPE3_POSTINIT,
+	PTS_PIPE3_POSTLOCK,
+	PTS_MAX,
+};
+
 enum exynos5_usbdrd_phy_id {
 	EXYNOS5_DRDPHY_UTMI,
 	EXYNOS5_DRDPHY_PIPE3,
@@ -183,6 +360,7 @@ struct exynos5_usbdrd_phy_config {
 
 struct exynos5_usbdrd_phy_drvdata {
 	const struct exynos5_usbdrd_phy_config *phy_cfg;
+	const struct exynos5_usbdrd_phy_tuning **phy_tunes;
 	const struct phy_ops *phy_ops;
 	u32 pmu_offset_usbdrd0_phy;
 	u32 pmu_offset_usbdrd0_phy_ss;
@@ -194,6 +372,8 @@ struct exynos5_usbdrd_phy_drvdata {
  * struct exynos5_usbdrd_phy - driver data for USB 3.0 PHY
  * @dev: pointer to device instance of this platform device
  * @reg_phy: usb phy controller register memory base
+ * @reg_pcs: usb phy physical coding sublayer register memory base
+ * @reg_pma: usb phy physical media attachment register memory base
  * @phy_clks: phy clocks for register access
  * @n_phy_clks: number of phy clocks for register access
  * @pipeclk: clock for pipe3 phy
@@ -212,6 +392,8 @@ struct exynos5_usbdrd_phy_drvdata {
 struct exynos5_usbdrd_phy {
 	struct device *dev;
 	void __iomem *reg_phy;
+	void __iomem *reg_pcs;
+	void __iomem *reg_pma;
 	struct clk_bulk_data  *phy_clks;
 	size_t n_phy_clks;
 	struct clk *pipeclk;
@@ -363,6 +545,45 @@ exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst)
 	return reg;
 }
 
+static void
+exynos5_usbdrd_apply_phy_tunes(struct exynos5_usbdrd_phy *phy_drd,
+			       enum exynos5_usbdrd_phy_tuning_state state)
+{
+	const struct exynos5_usbdrd_phy_tuning *tune;
+
+	tune = phy_drd->drv_data->phy_tunes[state];
+	if (!tune)
+		return;
+
+	for_each_phy_tune(tune) {
+		void __iomem *reg_base;
+		u32 reg = 0;
+
+		switch (tune->region) {
+		case PTR_PHY:
+			reg_base = phy_drd->reg_phy;
+			break;
+		case PTR_PCS:
+			reg_base = phy_drd->reg_pcs;
+			break;
+		case PTR_PMA:
+			reg_base = phy_drd->reg_pma;
+			break;
+		default:
+			dev_warn_once(phy_drd->dev,
+				      "unknown phy region %d\n", tune->region);
+			continue;
+		}
+
+		if (~tune->mask) {
+			reg = readl(reg_base + tune->off);
+			reg &= ~tune->mask;
+		}
+		reg |= tune->val;
+		writel(reg, reg_base + tune->off);
+	}
+}
+
 static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd)
 {
 	u32 reg;
@@ -378,6 +599,159 @@ static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd)
 	writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
 }
 
+static void
+exynos5_usbdrd_usbdp_g2_v4_ctrl_pma_ready(struct exynos5_usbdrd_phy *phy_drd)
+{
+	void __iomem *regs_base = phy_drd->reg_phy;
+	u32 reg;
+
+	/* link pipe_clock selection to pclk of PMA */
+	reg = readl(regs_base + EXYNOS850_DRD_CLKRST);
+	reg |= CLKRST_LINK_PCLK_SEL;
+	writel(reg, regs_base + EXYNOS850_DRD_CLKRST);
+
+	reg = readl(regs_base + EXYNOS850_DRD_SECPMACTL);
+	reg &= ~SECPMACTL_PMA_REF_FREQ_SEL;
+	reg |= FIELD_PREP_CONST(SECPMACTL_PMA_REF_FREQ_SEL, 1);
+	/* SFR reset */
+	reg |= (SECPMACTL_PMA_LOW_PWR | SECPMACTL_PMA_APB_SW_RST);
+	reg &= ~(SECPMACTL_PMA_ROPLL_REF_CLK_SEL |
+		 SECPMACTL_PMA_LCPLL_REF_CLK_SEL);
+	/* PMA power off */
+	reg |= (SECPMACTL_PMA_TRSV_SW_RST | SECPMACTL_PMA_CMN_SW_RST |
+		SECPMACTL_PMA_INIT_SW_RST);
+	writel(reg, regs_base + EXYNOS850_DRD_SECPMACTL);
+
+	udelay(1);
+
+	reg = readl(regs_base + EXYNOS850_DRD_SECPMACTL);
+	reg &= ~SECPMACTL_PMA_LOW_PWR;
+	writel(reg, regs_base + EXYNOS850_DRD_SECPMACTL);
+
+	udelay(1);
+
+	/* release override */
+	reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL);
+	reg &= ~LINKCTRL_FORCE_PIPE_EN;
+	writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL);
+
+	udelay(1);
+
+	/* APB enable */
+	reg = readl(regs_base + EXYNOS850_DRD_SECPMACTL);
+	reg &= ~SECPMACTL_PMA_APB_SW_RST;
+	writel(reg, regs_base + EXYNOS850_DRD_SECPMACTL);
+}
+
+static void
+exynos5_usbdrd_usbdp_g2_v4_pma_lane_mux_sel(struct exynos5_usbdrd_phy *phy_drd)
+{
+	void __iomem *regs_base = phy_drd->reg_pma;
+	u32 reg;
+
+	/* lane configuration: USB on all lanes */
+	reg = readl(regs_base + EXYNOS9_PMA_USBDP_CMN_REG00B8);
+	reg &= ~CMN_REG00B8_LANE_MUX_SEL_DP;
+	writel(reg, regs_base + EXYNOS9_PMA_USBDP_CMN_REG00B8);
+
+	/*
+	 * FIXME: below code supports one connector orientation only. It needs
+	 * updating once we can receive connector events.
+	 */
+	/* override of TX receiver detector and comparator: lane 1 */
+	reg = readl(regs_base + EXYNOS9_PMA_USBDP_TRSV_REG0413);
+	reg &= ~TRSV_REG0413_OVRD_LN1_TX_RXD_COMP_EN;
+	reg &= ~TRSV_REG0413_OVRD_LN1_TX_RXD_EN;
+	writel(reg, regs_base + EXYNOS9_PMA_USBDP_TRSV_REG0413);
+
+	/* lane 3 */
+	reg = readl(regs_base + EXYNOS9_PMA_USBDP_TRSV_REG0813);
+	reg |= TRSV_REG0813_OVRD_LN3_TX_RXD_COMP_EN;
+	reg |= TRSV_REG0813_OVRD_LN3_TX_RXD_EN;
+	writel(reg, regs_base + EXYNOS9_PMA_USBDP_TRSV_REG0813);
+}
+
+static int
+exynos5_usbdrd_usbdp_g2_v4_pma_check_pll_lock(struct exynos5_usbdrd_phy *phy_drd)
+{
+	static const unsigned int timeout_us = 40000;
+	static const unsigned int sleep_us = 40;
+	static const u32 locked = (CMN_REG01C0_ANA_LCPLL_LOCK_DONE |
+				   CMN_REG01C0_ANA_LCPLL_AFC_DONE);
+	u32 reg;
+	int err;
+
+	err = readl_poll_timeout(
+			phy_drd->reg_pma + EXYNOS9_PMA_USBDP_CMN_REG01C0,
+			reg, (reg & locked) == locked, sleep_us, timeout_us);
+	if (err)
+		dev_err(phy_drd->dev,
+			"timed out waiting for PLL lock: %#.8x\n", reg);
+
+	return err;
+}
+
+static void
+exynos5_usbdrd_usbdp_g2_v4_pma_check_cdr_lock(struct exynos5_usbdrd_phy *phy_drd)
+{
+	static const unsigned int timeout_us = 40000;
+	static const unsigned int sleep_us = 40;
+	static const u32 locked =
+		(TRSV_REG03C3_LN0_MON_RX_CDR_AFC_DONE
+		 | TRSV_REG03C3_LN0_MON_RX_CDR_CAL_DONE
+		 | TRSV_REG03C3_LN0_MON_RX_CDR_FLD_PLL_MODE_DONE
+		 | TRSV_REG03C3_LN0_MON_RX_CDR_LOCK_DONE);
+	u32 reg;
+	int err;
+
+	err = readl_poll_timeout(
+			phy_drd->reg_pma + EXYNOS9_PMA_USBDP_TRSV_REG03C3,
+			reg, (reg & locked) == locked, sleep_us, timeout_us);
+	if (!err)
+		return;
+
+	dev_err(phy_drd->dev,
+		"timed out waiting for CDR lock (l0): %#.8x, retrying\n", reg);
+
+	/* based on cable orientation, this might be on the other phy port */
+	err = readl_poll_timeout(
+			phy_drd->reg_pma + EXYNOS9_PMA_USBDP_TRSV_REG07C3,
+			reg, (reg & locked) == locked, sleep_us, timeout_us);
+	if (err)
+		dev_err(phy_drd->dev,
+			"timed out waiting for CDR lock (l2): %#.8x\n", reg);
+}
+
+static void exynos5_usbdrd_gs101_pipe3_init(struct exynos5_usbdrd_phy *phy_drd)
+{
+	void __iomem *regs_pma = phy_drd->reg_pma;
+	void __iomem *regs_phy = phy_drd->reg_phy;
+	u32 reg;
+
+	exynos5_usbdrd_usbdp_g2_v4_ctrl_pma_ready(phy_drd);
+
+	/* force aux off */
+	reg = readl(regs_pma + EXYNOS9_PMA_USBDP_CMN_REG0008);
+	reg &= ~CMN_REG0008_AUX_EN;
+	reg |= CMN_REG0008_OVRD_AUX_EN;
+	writel(reg, regs_pma + EXYNOS9_PMA_USBDP_CMN_REG0008);
+
+	exynos5_usbdrd_apply_phy_tunes(phy_drd, PTS_PIPE3_PREINIT);
+	exynos5_usbdrd_apply_phy_tunes(phy_drd, PTS_PIPE3_INIT);
+	exynos5_usbdrd_apply_phy_tunes(phy_drd, PTS_PIPE3_POSTINIT);
+
+	exynos5_usbdrd_usbdp_g2_v4_pma_lane_mux_sel(phy_drd);
+
+	/* reset release from port */
+	reg = readl(regs_phy + EXYNOS850_DRD_SECPMACTL);
+	reg &= ~(SECPMACTL_PMA_TRSV_SW_RST | SECPMACTL_PMA_CMN_SW_RST |
+		 SECPMACTL_PMA_INIT_SW_RST);
+	writel(reg, regs_phy + EXYNOS850_DRD_SECPMACTL);
+
+	if (!exynos5_usbdrd_usbdp_g2_v4_pma_check_pll_lock(phy_drd))
+		exynos5_usbdrd_usbdp_g2_v4_pma_check_cdr_lock(phy_drd);
+}
+
 static void exynos5_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd)
 {
 	u32 reg;
@@ -736,10 +1110,29 @@ static const struct phy_ops exynos5_usbdrd_phy_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static void
+exynos5_usbdrd_usb_v3p1_pipe_override(struct exynos5_usbdrd_phy *phy_drd)
+{
+	void __iomem *regs_base = phy_drd->reg_phy;
+	u32 reg;
+
+	/* force pipe3 signal for link */
+	reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL);
+	reg &= ~LINKCTRL_FORCE_PHYSTATUS;
+	reg |= LINKCTRL_FORCE_PIPE_EN | LINKCTRL_FORCE_RXELECIDLE;
+	writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL);
+
+	/* PMA disable */
+	reg = readl(regs_base + EXYNOS850_DRD_SECPMACTL);
+	reg |= SECPMACTL_PMA_LOW_PWR;
+	writel(reg, regs_base + EXYNOS850_DRD_SECPMACTL);
+}
+
 static void exynos850_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd)
 {
 	void __iomem *regs_base = phy_drd->reg_phy;
 	u32 reg;
+	u32 ss_ports;
 
 	/*
 	 * Disable HWACG (hardware auto clock gating control). This will force
@@ -750,8 +1143,16 @@ static void exynos850_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd)
 	reg |= LINKCTRL_FORCE_QACT;
 	writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL);
 
+	reg = readl(regs_base + EXYNOS850_DRD_LINKPORT);
+	ss_ports = FIELD_GET(LINKPORT_HOST_NUM_U3, reg);
+
 	/* Start PHY Reset (POR=high) */
 	reg = readl(regs_base + EXYNOS850_DRD_CLKRST);
+	if (ss_ports) {
+		reg |= CLKRST_PHY20_SW_POR;
+		reg |= CLKRST_PHY20_SW_POR_SEL;
+		reg |= CLKRST_PHY_RESET_SEL;
+	}
 	reg |= CLKRST_PHY_SW_RST;
 	writel(reg, regs_base + EXYNOS850_DRD_CLKRST);
 
@@ -812,6 +1213,10 @@ static void exynos850_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd)
 	/* Finish PHY reset (POR=low) */
 	udelay(10); /* required before doing POR=low */
 	reg = readl(regs_base + EXYNOS850_DRD_CLKRST);
+	if (ss_ports) {
+		reg |= CLKRST_PHY20_SW_POR_SEL;
+		reg &= ~CLKRST_PHY20_SW_POR;
+	}
 	reg &= ~(CLKRST_PHY_SW_RST | CLKRST_PORT_RST);
 	writel(reg, regs_base + EXYNOS850_DRD_CLKRST);
 	udelay(75); /* required after POR=low for guaranteed PHY clock */
@@ -820,6 +1225,13 @@ static void exynos850_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd)
 	reg = readl(regs_base + EXYNOS850_DRD_HSP);
 	reg &= ~HSP_FSV_OUT_EN;
 	writel(reg, regs_base + EXYNOS850_DRD_HSP);
+
+	if (ss_ports)
+		exynos5_usbdrd_usb_v3p1_pipe_override(phy_drd);
+
+	if (phy_drd->drv_data->phy_tunes)
+		exynos5_usbdrd_apply_phy_tunes(phy_drd,
+					       PTS_UTMI_POSTINIT);
 }
 
 static int exynos850_usbdrd_phy_init(struct phy *phy)
@@ -848,6 +1260,9 @@ static int exynos850_usbdrd_phy_exit(struct phy *phy)
 	u32 reg;
 	int ret;
 
+	if (inst->phy_cfg->id != EXYNOS5_DRDPHY_UTMI)
+		return 0;
+
 	ret = clk_bulk_prepare_enable(phy_drd->n_phy_clks, phy_drd->phy_clks);
 	if (ret)
 		return ret;
@@ -884,8 +1299,16 @@ static const struct phy_ops exynos850_usbdrd_phy_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static const struct phy_ops gs101_usbdrd_phy_ops = {
+	.init		= exynos850_usbdrd_phy_init,
+	.exit		= exynos850_usbdrd_phy_exit,
+	.power_on	= exynos5_usbdrd_phy_power_on,
+	.power_off	= exynos5_usbdrd_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
 static const char * const phy_clk_list[] = {
-	"phy",
+	"phy", "ctrl_aclk", "ctrl_pclk", "scl_pclk",
 };
 
 static int exynos5_usbdrd_phy_clk_handle(struct exynos5_usbdrd_phy *phy_drd)
@@ -971,6 +1394,150 @@ static const struct exynos5_usbdrd_phy_config phy_cfg_exynos850[] = {
 	},
 };
 
+static const struct exynos5_usbdrd_phy_config phy_cfg_gs101[] = {
+	{
+		.id		= EXYNOS5_DRDPHY_UTMI,
+		.phy_isol	= exynos5_usbdrd_phy_isol,
+		.phy_init	= exynos850_usbdrd_utmi_init,
+	},
+	{
+		.id		= EXYNOS5_DRDPHY_PIPE3,
+		.phy_isol	= exynos5_usbdrd_phy_isol,
+		.phy_init	= exynos5_usbdrd_gs101_pipe3_init,
+	},
+};
+
+static const struct exynos5_usbdrd_phy_tuning gs101_tunes_utmi_postinit[] = {
+	PHY_TUNING_ENTRY_PHY(EXYNOS850_DRD_HSPPARACON,
+			     (HSPPARACON_TXVREF | HSPPARACON_TXRES |
+			      HSPPARACON_TXPREEMPAMP | HSPPARACON_SQRX |
+			      HSPPARACON_COMPDIS),
+			     (FIELD_PREP_CONST(HSPPARACON_TXVREF, 6) |
+			      FIELD_PREP_CONST(HSPPARACON_TXRES, 1) |
+			      FIELD_PREP_CONST(HSPPARACON_TXPREEMPAMP, 3) |
+			      FIELD_PREP_CONST(HSPPARACON_SQRX, 5) |
+			      FIELD_PREP_CONST(HSPPARACON_COMPDIS, 7))),
+	PHY_TUNING_ENTRY_LAST
+};
+
+static const struct exynos5_usbdrd_phy_tuning gs101_tunes_pipe3_preinit[] = {
+	/* preinit */
+	/* CDR data mode exit GEN1 ON / GEN2 OFF */
+	PHY_TUNING_ENTRY_PMA(0x0c8c, -1, 0xff),
+	PHY_TUNING_ENTRY_PMA(0x1c8c, -1, 0xff),
+	PHY_TUNING_ENTRY_PMA(0x0c9c, -1, 0x7d),
+	PHY_TUNING_ENTRY_PMA(0x1c9c, -1, 0x7d),
+	/* improve EDS distribution */
+	PHY_TUNING_ENTRY_PMA(0x0e7c, -1, 0x06),
+	PHY_TUNING_ENTRY_PMA(0x09e0, -1, 0x00),
+	PHY_TUNING_ENTRY_PMA(0x09e4, -1, 0x36),
+	PHY_TUNING_ENTRY_PMA(0x1e7c, -1, 0x06),
+	PHY_TUNING_ENTRY_PMA(0x1e90, -1, 0x00),
+	PHY_TUNING_ENTRY_PMA(0x1e94, -1, 0x36),
+	/* improve LVCC */
+	PHY_TUNING_ENTRY_PMA(0x08f0, -1, 0x30),
+	PHY_TUNING_ENTRY_PMA(0x18f0, -1, 0x30),
+	/* LFPS RX VIH shmoo hole */
+	PHY_TUNING_ENTRY_PMA(0x0a08, -1, 0x0c),
+	PHY_TUNING_ENTRY_PMA(0x1a08, -1, 0x0c),
+	/* remove unrelated option for v4 phy */
+	PHY_TUNING_ENTRY_PMA(0x0a0c, -1, 0x05),
+	PHY_TUNING_ENTRY_PMA(0x1a0c, -1, 0x05),
+	/* improve Gen2 LVCC */
+	PHY_TUNING_ENTRY_PMA(0x00f8, -1, 0x1c),
+	PHY_TUNING_ENTRY_PMA(0x00fc, -1, 0x54),
+	/* Change Vth of RCV_DET because of TD 7.40 Polling Retry Test */
+	PHY_TUNING_ENTRY_PMA(0x104c, -1, 0x07),
+	PHY_TUNING_ENTRY_PMA(0x204c, -1, 0x07),
+	/* reduce Ux Exit time, assuming 26MHz clock */
+	/* Gen1 */
+	PHY_TUNING_ENTRY_PMA(0x0ca8, -1, 0x00),
+	PHY_TUNING_ENTRY_PMA(0x0cac, -1, 0x04),
+	PHY_TUNING_ENTRY_PMA(0x1ca8, -1, 0x00),
+	PHY_TUNING_ENTRY_PMA(0x1cac, -1, 0x04),
+	/* Gen2 */
+	PHY_TUNING_ENTRY_PMA(0x0cb8, -1, 0x00),
+	PHY_TUNING_ENTRY_PMA(0x0cbc, -1, 0x04),
+	PHY_TUNING_ENTRY_PMA(0x1cb8, -1, 0x00),
+	PHY_TUNING_ENTRY_PMA(0x1cbc, -1, 0x04),
+	/* RX impedance setting */
+	PHY_TUNING_ENTRY_PMA(0x0bb0, 0x03, 0x01),
+	PHY_TUNING_ENTRY_PMA(0x0bb4, 0xf0, 0xa0),
+	PHY_TUNING_ENTRY_PMA(0x1bb0, 0x03, 0x01),
+	PHY_TUNING_ENTRY_PMA(0x1bb4, 0xf0, 0xa0),
+
+	PHY_TUNING_ENTRY_LAST
+};
+
+static const struct exynos5_usbdrd_phy_tuning gs101_tunes_pipe3_init[] = {
+	/* init */
+	/* abnormal common pattern mask */
+	PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_BACK_END_MODE_VEC,
+			     BACK_END_MODE_VEC_DISABLE_DATA_MASK, 0),
+	/* de-serializer enabled when U2 */
+	PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_OUT_VEC_2, PCS_OUT_VEC_B4_DYNAMIC,
+			     PCS_OUT_VEC_B4_SEL_OUT),
+	/* TX Keeper Disable, Squelch on when U3 */
+	PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_OUT_VEC_3, PCS_OUT_VEC_B7_DYNAMIC,
+			     PCS_OUT_VEC_B7_SEL_OUT | PCS_OUT_VEC_B2_SEL_OUT),
+	PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_NS_VEC_PS1_N1, -1,
+			     (FIELD_PREP_CONST(NS_VEC_NS_REQ, 5) |
+			      NS_VEC_ENABLE_TIMER |
+			      FIELD_PREP_CONST(NS_VEC_SEL_TIMEOUT, 3))),
+	PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_NS_VEC_PS2_N0, -1,
+			     (FIELD_PREP_CONST(NS_VEC_NS_REQ, 1) |
+			      NS_VEC_ENABLE_TIMER |
+			      FIELD_PREP_CONST(NS_VEC_SEL_TIMEOUT, 3) |
+			      FIELD_PREP_CONST(NS_VEC_COND_MASK, 2) |
+			      FIELD_PREP_CONST(NS_VEC_EXP_COND, 2))),
+	PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_NS_VEC_PS3_N0, -1,
+			     (FIELD_PREP_CONST(NS_VEC_NS_REQ, 1) |
+			      NS_VEC_ENABLE_TIMER |
+			      FIELD_PREP_CONST(NS_VEC_SEL_TIMEOUT, 3) |
+			      FIELD_PREP_CONST(NS_VEC_COND_MASK, 7) |
+			      FIELD_PREP_CONST(NS_VEC_EXP_COND, 7))),
+	PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_TIMEOUT_0, -1, 112),
+	/* Block Aligner Type B */
+	PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_RX_CONTROL, 0,
+			     RX_CONTROL_EN_BLOCK_ALIGNER_TYPE_B),
+	/* Block align at TS1/TS2 for Gen2 stability (Gen2 only) */
+	PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_RX_CONTROL_DEBUG,
+		RX_CONTROL_DEBUG_NUM_COM_FOUND,
+		(RX_CONTROL_DEBUG_EN_TS_CHECK |
+		 /*
+		  * increase pcs ts1 adding packet-cnt 1 --> 4
+		  * lnx_rx_valid_rstn_delay_rise_sp/ssp :
+		  * 19.6us(0x200) -> 15.3us(0x4)
+		  */
+		 FIELD_PREP_CONST(RX_CONTROL_DEBUG_NUM_COM_FOUND, 4))),
+	/* Gen1 Tx DRIVER pre-shoot, de-emphasis, level ctrl */
+	PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_HS_TX_COEF_MAP_0,
+		(HS_TX_COEF_MAP_0_SSTX_DEEMP | HS_TX_COEF_MAP_0_SSTX_LEVEL |
+		 HS_TX_COEF_MAP_0_SSTX_PRE_SHOOT),
+		(FIELD_PREP_CONST(HS_TX_COEF_MAP_0_SSTX_DEEMP, 8) |
+		 FIELD_PREP_CONST(HS_TX_COEF_MAP_0_SSTX_LEVEL, 0xb) |
+		 FIELD_PREP_CONST(HS_TX_COEF_MAP_0_SSTX_PRE_SHOOT, 0))),
+	/* Gen2 Tx DRIVER level ctrl */
+	PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_LOCAL_COEF,
+		LOCAL_COEF_PMA_CENTER_COEF,
+		FIELD_PREP_CONST(LOCAL_COEF_PMA_CENTER_COEF, 0xb)),
+	/* Gen2 U1 exit LFPS duration : 900ns ~ 1.2us */
+	PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_TIMEOUT_3, -1, 4096),
+	/* set skp_remove_th 0x2 -> 0x7 for avoiding retry problem. */
+	PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_EBUF_PARAM,
+		EBUF_PARAM_SKP_REMOVE_TH_EMPTY_MODE,
+		FIELD_PREP_CONST(EBUF_PARAM_SKP_REMOVE_TH_EMPTY_MODE, 0x7)),
+
+	PHY_TUNING_ENTRY_LAST
+};
+
+static const struct exynos5_usbdrd_phy_tuning *gs101_tunes[] = {
+	[PTS_UTMI_POSTINIT] = gs101_tunes_utmi_postinit,
+	[PTS_PIPE3_PREINIT] = gs101_tunes_pipe3_preinit,
+	[PTS_PIPE3_INIT] = gs101_tunes_pipe3_init,
+};
+
+
 static const struct exynos5_usbdrd_phy_drvdata exynos5420_usbdrd_phy = {
 	.phy_cfg		= phy_cfg_exynos5,
 	.phy_ops		= &exynos5_usbdrd_phy_ops,
@@ -1008,8 +1575,20 @@ static const struct exynos5_usbdrd_phy_drvdata exynos850_usbdrd_phy = {
 	.has_common_clk_gate	= true,
 };
 
+static const struct exynos5_usbdrd_phy_drvdata gs101_usbd31rd_phy = {
+	.phy_cfg			= phy_cfg_gs101,
+	.phy_tunes			= gs101_tunes,
+	.phy_ops			= &gs101_usbdrd_phy_ops,
+	.pmu_offset_usbdrd0_phy		= GS101_PHY_CTRL_USB20,
+	.pmu_offset_usbdrd0_phy_ss	= GS101_PHY_CTRL_USBDP,
+	.has_common_clk_gate		= true,
+};
+
 static const struct of_device_id exynos5_usbdrd_phy_of_match[] = {
 	{
+		.compatible = "google,gs101-usb31drd-phy",
+		.data = &gs101_usbd31rd_phy
+	}, {
 		.compatible = "samsung,exynos5250-usbdrd-phy",
 		.data = &exynos5250_usbdrd_phy
 	}, {
@@ -1048,16 +1627,35 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev)
 	dev_set_drvdata(dev, phy_drd);
 	phy_drd->dev = dev;
 
-	phy_drd->reg_phy = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(phy_drd->reg_phy))
-		return PTR_ERR(phy_drd->reg_phy);
-
 	drv_data = of_device_get_match_data(dev);
 	if (!drv_data)
 		return -EINVAL;
-
 	phy_drd->drv_data = drv_data;
 
+	if (of_property_present(dev->of_node, "reg-names")) {
+		void __iomem *reg;
+
+		reg = devm_platform_ioremap_resource_byname(pdev, "phy");
+		if (IS_ERR(reg))
+			return PTR_ERR(reg);
+		phy_drd->reg_phy = reg;
+
+		reg = devm_platform_ioremap_resource_byname(pdev, "pcs");
+		if (IS_ERR(reg))
+			return PTR_ERR(reg);
+		phy_drd->reg_pcs = reg;
+
+		reg = devm_platform_ioremap_resource_byname(pdev, "pma");
+		if (IS_ERR(reg))
+			return PTR_ERR(reg);
+		phy_drd->reg_pma = reg;
+	} else {
+		/* DTB with just a single region */
+		phy_drd->reg_phy = devm_platform_ioremap_resource(pdev, 0);
+		if (IS_ERR(phy_drd->reg_phy))
+			return PTR_ERR(phy_drd->reg_phy);
+	}
+
 	ret = exynos5_usbdrd_phy_clk_handle(phy_drd);
 	if (ret) {
 		dev_err(dev, "Failed to initialize clocks\n");
diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
index aa840ed043e1..6765160eaab2 100644
--- a/include/linux/soc/samsung/exynos-regs-pmu.h
+++ b/include/linux/soc/samsung/exynos-regs-pmu.h
@@ -657,4 +657,8 @@
 #define EXYNOS5433_PAD_RETENTION_UFS_OPTION			(0x3268)
 #define EXYNOS5433_PAD_RETENTION_FSYSGENIO_OPTION		(0x32A8)
 
+/* For GS101 */
+#define GS101_PHY_CTRL_USB20					0x3eb0
+#define GS101_PHY_CTRL_USBDP					0x3eb4
+
 #endif /* __LINUX_SOC_EXYNOS_REGS_PMU_H */
