@@ -36,6 +36,15 @@ properties:
compatible:
const: samsung,s2mpg10-pmic
+ pmic2:
+ description: Child node describing the sub PMIC.
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: samsung,s2mpg11-pmic
+
shmem:
description:
List of phandle pointing to the shared memory (SHM) area. The memory
@@ -52,7 +61,9 @@ additionalProperties: false
examples:
- |
+ #include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/regulator/samsung,s2mpg10-regulator.h>
power-management {
compatible = "google,gs101-acpm-ipc";
@@ -63,12 +74,20 @@ examples:
compatible = "samsung,s2mpg10-pmic";
interrupts-extended = <&gpa0 6 IRQ_TYPE_LEVEL_LOW>;
+ vinl3m-supply = <&buck8m>;
+
regulators {
ldo1m {
regulator-name = "vdd_ldo1";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
- regulator-always-on;
+ };
+
+ ldo20m {
+ regulator-name = "vdd_ldo1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ samsung,ext-control = <S2MPG10_PCTRLSEL_LDO20M_EN>;
};
// ...
@@ -77,8 +96,23 @@ examples:
regulator-name = "vdd_mif";
regulator-min-microvolt = <450000>;
regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
+ regulator-ramp-delay = <6250>;
+ };
+ };
+ };
+
+ pmic2 {
+ compatible = "samsung,s2mpg11-pmic";
+ interrupts-extended = <&gpa0 7 IRQ_TYPE_LEVEL_LOW>;
+
+ vinl1s-supply = <&buck8m>;
+ vinl2s-supply = <&buck6s>;
+
+ regulators {
+ buckd {
+ regulator-ramp-delay = <6250>;
+ samsung,ext-control = <S2MPG11_PCTRLSEL_UFS_EN>;
+ samsung,ext-control-gpios = <&gpp0 1 GPIO_ACTIVE_HIGH>;
};
};
};
In a typical system using the Samsung S2MPG10 PMIC, an S2MPG11 is used as a sub-PMIC. The interface for both is the ACPM firmware protocol, so update the example here to describe the connection for both. Signed-off-by: André Draszik <andre.draszik@linaro.org> --- .../bindings/firmware/google,gs101-acpm-ipc.yaml | 40 ++++++++++++++++++++-- 1 file changed, 37 insertions(+), 3 deletions(-)