mbox series

[V1,0/2] Suspend clk scaling when there is no request

Message ID 20240626103033.2332-1-quic_rampraka@quicinc.com
Headers show
Series Suspend clk scaling when there is no request | expand

Message

Ram Prakash Gupta June 26, 2024, 10:30 a.m. UTC 
Currently ufs clk scaling is getting suspended only when the
clks are scaled down, but next when high load is generated its
adding a huge amount of latency in scaling up the clk and complete
the request post that.

Now if the scaling is suspended in its existing state, and when high
load is generated it is helping improve the random performance KPI by
28%. So suspending the scaling when there is no request. And the clk
would be put in low scaled state when the actual request load is low.

Making this change as optional for other vendor by having the check
enabled using vops as for some vendor suspending without bringing the
clk in low scaled state might have impact on power consumption on the
SoC.


Ram Prakash Gupta (2):
  scsi: ufs: Suspend clk scaling on no request
  scsi: ufs: qcom: Enable suspending clk scaling on no request

 drivers/ufs/core/ufshcd.c   | 3 ++-
 drivers/ufs/host/ufs-qcom.c | 2 ++
 include/ufs/ufshcd.h        | 1 +
 3 files changed, 5 insertions(+), 1 deletion(-)