diff mbox series

[v2,2/8] qedi: Skip f/w connection termination for pci shutdown handler.

Message ID 20200908095657.26821-3-mrangankar@marvell.com
State New
Headers show
Series qedi: Misc bug fixes and enhancements | expand

Commit Message

Manish Rangankar Sept. 8, 2020, 9:56 a.m. UTC 
In boot from san scenario when qedi pci shutdown handler is
called with active iSCSI sessions, sometimes target takes
too long time to respond to f/w connection termination request.
Instead skip sending termination ramrod and progress with
unload path.

Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
---
 drivers/scsi/qedi/qedi_iscsi.c | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c
index c14ac7882afa..f815845fc568 100644
--- a/drivers/scsi/qedi/qedi_iscsi.c
+++ b/drivers/scsi/qedi/qedi_iscsi.c
@@ -1069,6 +1069,10 @@  static void qedi_ep_disconnect(struct iscsi_endpoint *ep)
 		wait_delay += qedi->pf_params.iscsi_pf_params.two_msl_timer;
 
 	qedi_ep->state = EP_STATE_DISCONN_START;
+
+	if (test_bit(QEDI_IN_SHUTDOWN, &qedi->flags))
+		goto ep_release_conn;
+
 	ret = qedi_ops->destroy_conn(qedi->cdev, qedi_ep->handle, abrt_conn);
 	if (ret) {
 		QEDI_WARN(&qedi->dbg_ctx,