| Message ID | 20221208105947.2399894-26-niklas.cassel@wdc.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add Command Duration Limits support | expand |
On Thu, Dec 08, 2022 at 11:59:41AM +0100, Niklas Cassel wrote: > +What: /sys/block/*/device/duration_limits/enable > +Date: Dec, 2022 > +KernelVersion: v6.3 > +Contact: linux-scsi@vger.kernel.org > +Description: > + (RW) For ATA and SCSI devices supporting the command duration > + limits feature, write to the file to turn on or off the > + feature. By default this feature is turned off. If the device > + does not support the command duration limits feature, this > + attribute does not exist (the directory > + "/sys/block/*/device/duration_limits" does not exist). > + Writing "1" to this file enables the use of command duration > + limits for read and write commands in the kernel and turns on > + the feature on the device. Writing "0" disables the feature. Sphinx reported inline emphasis warning due to unescaped asterisk above: Documentation/ABI/testing/sysfs-block-device:101: WARNING: Inline emphasis start-string without end-string. I have applied the fixup: ---- >8 ---- diff --git a/Documentation/ABI/testing/sysfs-block-device b/Documentation/ABI/testing/sysfs-block-device index 44841f91c69bfe..2cf806b638fbb3 100644 --- a/Documentation/ABI/testing/sysfs-block-device +++ b/Documentation/ABI/testing/sysfs-block-device @@ -107,7 +107,7 @@ Description: feature. By default this feature is turned off. If the device does not support the command duration limits feature, this attribute does not exist (the directory - "/sys/block/*/device/duration_limits" does not exist). + "/sys/block/\*/device/duration_limits" does not exist). Writing "1" to this file enables the use of command duration limits for read and write commands in the kernel and turns on the feature on the device. Writing "0" disables the feature. > + > + > +What: /sys/block/*/device/duration_limits/read/[1-7]/* > +Date: Dec, 2022 > +KernelVersion: v6.3 > +Contact: linux-scsi@vger.kernel.org > +Description: > + (RO) For ATA and SCSI devices supporting the command duration > + limits feature, this shows the set of 7 command duration limits > + descriptors for read commands currently set on the device. For > + each of the 7 descritors, the following read-only attributes > + are present: > + > + - duration_guideline: specifies the preferred length of time > + in microseconds for the completion of a command. > + > + - duration_guideline_policy: specifies the policy action > + taken if the duration_guideline attribute specifies a > + non-zero command duration guideline that the device is > + unable to achieve for a command. > + > + Possible values are: > + > + - 0x0: The device will complete the command at the > + earliest possible time consistent with the > + specified command duration guideline. > + - 0x1: If the specified command duration guideline has > + not been achieved and the command duration > + guideline policy field is not the seventh command > + duration limits descriptor, then the device > + continues processing that command using the > + command duration limits descriptor that has > + the next higher number. > + - 0x2: The device will continue processing the command > + as with no command duration limits descriptor > + being used. > + - 0xD: The device will complete the command and an IO > + failure will be reported to the user with the ETIME > + error code. > + - 0xF: Same as 0xD. > + > <snipped>... > + Possible values are: > + > + - 0x0: The device will complete the command at the > + earliest possible time (i.e, do nothing based on > + the max limit not being met). > + - 0xD: The device will complete the command and an IO > + failure will be reported to the user with the ETIME > + error code. > + - 0xE: Same as 0xD. > + - 0xF: Same as 0xD. > + > <snipped>... > + Possible values are: > + > + - 0x0: The device will complete the command at the > + earliest possible time (i.e, do nothing based on > + the time limit not being met). > + - 0xD: The device will complete the command and an IO > + failure will be reported to the user with the ETIME > + error code. > + - 0xF: Same as 0xD. > + The lists items above looks poorly indented in htmldocs (due to use of proportional fonts). The fix is to align to first character after bullet list marker, like: ---- >8 ---- diff --git a/Documentation/ABI/testing/sysfs-block-device b/Documentation/ABI/testing/sysfs-block-device index 2cf806b638fbb3..79f67b975d57ac 100644 --- a/Documentation/ABI/testing/sysfs-block-device +++ b/Documentation/ABI/testing/sysfs-block-device @@ -135,21 +135,25 @@ Description: Possible values are: - 0x0: The device will complete the command at the - earliest possible time consistent with the - specified command duration guideline. + earliest possible time consistent with the + specified command duration guideline. + - 0x1: If the specified command duration guideline has - not been achieved and the command duration - guideline policy field is not the seventh command - duration limits descriptor, then the device - continues processing that command using the - command duration limits descriptor that has - the next higher number. + not been achieved and the command duration + guideline policy field is not the seventh command + duration limits descriptor, then the device + continues processing that command using the + command duration limits descriptor that has + the next higher number. + - 0x2: The device will continue processing the command - as with no command duration limits descriptor - being used. + as with no command duration limits descriptor + being used. + - 0xD: The device will complete the command and an IO - failure will be reported to the user with the ETIME - error code. + failure will be reported to the user with the ETIME + error code. + - 0xF: Same as 0xD. - max_active_time: specifies an upper limit in microseconds @@ -165,12 +169,15 @@ Description: Possible values are: - 0x0: The device will complete the command at the - earliest possible time (i.e, do nothing based on - the max limit not being met). + earliest possible time (i.e, do nothing based on + the max limit not being met). + - 0xD: The device will complete the command and an IO - failure will be reported to the user with the ETIME - error code. + failure will be reported to the user with the ETIME + error code. + - 0xE: Same as 0xD. + - 0xF: Same as 0xD. - max_inactive_time: specifies an upper limit in microseconds @@ -185,11 +192,13 @@ Description: Possible values are: - 0x0: The device will complete the command at the - earliest possible time (i.e, do nothing based on - the time limit not being met). + earliest possible time (i.e, do nothing based on + the time limit not being met). + - 0xD: The device will complete the command and an IO - failure will be reported to the user with the ETIME - error code. + failure will be reported to the user with the ETIME + error code. + - 0xF: Same as 0xD. Thanks.
On 12/9/22 12:22, Bagas Sanjaya wrote: > On Thu, Dec 08, 2022 at 11:59:41AM +0100, Niklas Cassel wrote: >> +What: /sys/block/*/device/duration_limits/enable >> +Date: Dec, 2022 >> +KernelVersion: v6.3 >> +Contact: linux-scsi@vger.kernel.org >> +Description: >> + (RW) For ATA and SCSI devices supporting the command duration >> + limits feature, write to the file to turn on or off the >> + feature. By default this feature is turned off. If the device >> + does not support the command duration limits feature, this >> + attribute does not exist (the directory >> + "/sys/block/*/device/duration_limits" does not exist). >> + Writing "1" to this file enables the use of command duration >> + limits for read and write commands in the kernel and turns on >> + the feature on the device. Writing "0" disables the feature. > > Sphinx reported inline emphasis warning due to unescaped asterisk above: > > Documentation/ABI/testing/sysfs-block-device:101: WARNING: Inline emphasis start-string without end-string. > > I have applied the fixup: [...] >> <snipped>... >> + Possible values are: >> + >> + - 0x0: The device will complete the command at the >> + earliest possible time (i.e, do nothing based on >> + the time limit not being met). >> + - 0xD: The device will complete the command and an IO >> + failure will be reported to the user with the ETIME >> + error code. >> + - 0xF: Same as 0xD. >> + > > The lists items above looks poorly indented in htmldocs (due to use of > proportional fonts). The fix is to align to first character after bullet > list marker, like: Thanks for the hints. Will fix that in v2.
diff --git a/Documentation/ABI/testing/sysfs-block-device b/Documentation/ABI/testing/sysfs-block-device index 7ac7b19b2f72..44841f91c69b 100644 --- a/Documentation/ABI/testing/sysfs-block-device +++ b/Documentation/ABI/testing/sysfs-block-device @@ -95,3 +95,146 @@ Description: This file does not exist if the HBA driver does not implement support for the SATA NCQ priority feature, regardless of the device support for this feature. + + +What: /sys/block/*/device/duration_limits/enable +Date: Dec, 2022 +KernelVersion: v6.3 +Contact: linux-scsi@vger.kernel.org +Description: + (RW) For ATA and SCSI devices supporting the command duration + limits feature, write to the file to turn on or off the + feature. By default this feature is turned off. If the device + does not support the command duration limits feature, this + attribute does not exist (the directory + "/sys/block/*/device/duration_limits" does not exist). + Writing "1" to this file enables the use of command duration + limits for read and write commands in the kernel and turns on + the feature on the device. Writing "0" disables the feature. + + +What: /sys/block/*/device/duration_limits/read/[1-7]/* +Date: Dec, 2022 +KernelVersion: v6.3 +Contact: linux-scsi@vger.kernel.org +Description: + (RO) For ATA and SCSI devices supporting the command duration + limits feature, this shows the set of 7 command duration limits + descriptors for read commands currently set on the device. For + each of the 7 descritors, the following read-only attributes + are present: + + - duration_guideline: specifies the preferred length of time + in microseconds for the completion of a command. + + - duration_guideline_policy: specifies the policy action + taken if the duration_guideline attribute specifies a + non-zero command duration guideline that the device is + unable to achieve for a command. + + Possible values are: + + - 0x0: The device will complete the command at the + earliest possible time consistent with the + specified command duration guideline. + - 0x1: If the specified command duration guideline has + not been achieved and the command duration + guideline policy field is not the seventh command + duration limits descriptor, then the device + continues processing that command using the + command duration limits descriptor that has + the next higher number. + - 0x2: The device will continue processing the command + as with no command duration limits descriptor + being used. + - 0xD: The device will complete the command and an IO + failure will be reported to the user with the ETIME + error code. + - 0xF: Same as 0xD. + + - max_active_time: specifies an upper limit in microseconds + on the time that elapses from the time at which the device + initiates actions to access, transfer, or act upon the + specified data until the time the device returns status for + the command. + + - max_active_time_policy: specifies the policy action taken + if the time used to process a command exceeds a non-zero + time specified by the max_active_time attribute. + + Possible values are: + + - 0x0: The device will complete the command at the + earliest possible time (i.e, do nothing based on + the max limit not being met). + - 0xD: The device will complete the command and an IO + failure will be reported to the user with the ETIME + error code. + - 0xE: Same as 0xD. + - 0xF: Same as 0xD. + + - max_inactive_time: specifies an upper limit in microseconds + on the time that elapses from the time at which the device + receives the command until the time at which the device + initiates actions to access, transfer, or act upon the + specified data. + + - max_inactive_time_policy: specifies the policy action taken + if a non-zero max_inactive_time limit is not met. + + Possible values are: + + - 0x0: The device will complete the command at the + earliest possible time (i.e, do nothing based on + the time limit not being met). + - 0xD: The device will complete the command and an IO + failure will be reported to the user with the ETIME + error code. + - 0xF: Same as 0xD. + + +What: /sys/block/*/device/duration_limits/read/page +Date: Dec, 2022 +KernelVersion: v6.3 +Contact: linux-scsi@vger.kernel.org +Description: + (RO) For ATA and SCSI devices supporting the command duration + limits feature, this shows the name of the device VPD page + specifying the set of 7 command duration limits descriptors for + read commands. Possible values are "T2A" and "T2B". + + +What: /sys/block/*/device/duration_limits/write/[1-7]/* +Date: Dec, 2022 +KernelVersion: v6.3 +Contact: linux-scsi@vger.kernel.org +Description: + (RO) For ATA and SCSI devices supporting the command duration + limits feature, this shows the set of 7 command duration limits + descriptors for write commands currently set on the device. For + each of the 7 descritors, the same set of read-only attributes + as for read commands is present. + + +What: /sys/block/*/device/duration_limits/write/page +Date: Dec, 2022 +KernelVersion: v6.3 +Contact: linux-scsi@vger.kernel.org +Description: + (RO) For ATA and SCSI devices supporting the command duration + limits feature, this shows the name of the device VPD page + specifying the set of 7 command duration limits descriptors for + write commands. Possible values are "T2A" and "T2B". + + +What: /sys/block/*/device/duration_limits/perf_vs_duration_guideline +Date: Dec, 2022 +KernelVersion: v6.3 +Contact: linux-scsi@vger.kernel.org +Description: + (RO) For ATA and SCSI devices supporting the command duration + limits feature, this specifies the maximum percentage increase + in average command completion times (reduction in IOPS) that + is allowed for the device to perform actions based on the + contents of the duration guideline field in every command + duration limit descriptor for both read and write commands.