From patchwork Tue May 14 14:28:53 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ranjan Kumar X-Patchwork-Id: 797645 Received: from mail-pf1-f176.google.com (mail-pf1-f176.google.com [209.85.210.176]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 2D43216D337 for ; Tue, 14 May 2024 14:31:59 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.210.176 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1715697122; cv=none; b=hkghwbe4ISn8UhKo0CACZXR8Qyo4o/bnQkYbrCq3xJ2cLTjt6QUgL2h37RXKH3fskAuLmzqwLgKo4VtDEW2se3HESvzN/2THAjC/EsA6W+1RwcUWGqsAaR87oPQ+40exSQzqDdrqzwYItrEz8hlvgAdODXthXpzfqwWF4usJuoE= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1715697122; c=relaxed/simple; bh=VmY1RKHuqs+0C19N8DJ0wSOtSzPk3RumjhcuVsrwcZ8=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version:Content-Type; b=ATboUgm+jpq22iooUOMMcvcQ4XX3qSZL4hUboAdH7hIoE5O1iBVf3uV3lp5R+9k4R6oQePPN/m8BdxbGYdYz586mjhZvaeNAY6l4AbyMFnx3RjEXQzxS/KPUI9PPLiOse1M+utzjmx8EU6EpZFGHbFDzy3wH1SyEfuv2Nlw7pXE= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=broadcom.com; spf=fail smtp.mailfrom=broadcom.com; dkim=pass (1024-bit key) header.d=broadcom.com header.i=@broadcom.com header.b=eVIYjc6i; arc=none smtp.client-ip=209.85.210.176 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=broadcom.com Authentication-Results: smtp.subspace.kernel.org; spf=fail smtp.mailfrom=broadcom.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=broadcom.com header.i=@broadcom.com header.b="eVIYjc6i" Received: by mail-pf1-f176.google.com with SMTP id d2e1a72fcca58-6f44b5e7f07so4593839b3a.2 for ; Tue, 14 May 2024 07:31:59 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=broadcom.com; s=google; t=1715697118; x=1716301918; darn=vger.kernel.org; h=mime-version:references:in-reply-to:message-id:date:subject:cc:to :from:from:to:cc:subject:date:message-id:reply-to; bh=LM/0Th4cJlgaGLCm9oK7YGJalPMk0Nm2wK6S7p4ohoc=; b=eVIYjc6ihywzF8a9hZ9JTGsC8q4b6PM43tnFR8Uiyaft6GTcWYJUANBDSNKjblO+5a BEhvhMW3pUdFdNCLDQweuBrdyWm10G91znRHL4csu24ArcRIXUTK3nbYCsUqfHrUmiS7 UvJwNfjHl0Ky/VAutvQGC1qinJbE+GZqm0/ew= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1715697118; x=1716301918; h=mime-version:references:in-reply-to:message-id:date:subject:cc:to :from:x-gm-message-state:from:to:cc:subject:date:message-id:reply-to; bh=LM/0Th4cJlgaGLCm9oK7YGJalPMk0Nm2wK6S7p4ohoc=; b=Xi8cQb3xAItorv/nDyFJnU51AXU/zzz+0QtcWCwbv3lmryYW+EF4bCOJJDAyyfobK5 XRSd6daMeAJB4Yb0XJpI7wVWx1v4ibj2z5kg2MXYDJq6r/oBcvZJFD/gFCUwYFGKxcUA azcm+zNw/E4G/v+wuYWrs/klxAwOpoj5n1936YMmerg6uw/M3X1iRdOz8ST/WC8sSWES x+5QpZR6SuEs/oRbm6xAlCkhAQm6FGWNABVST6TOQLFIcZTJ5YEYu6+Spv8XSBceU7LR yF7xvjeSHnu1LitxedVXQeUdwdeqs8MQH6KN4E/1N08jODPnvbqShWAgTHESEbK6Vxtf I4NA== X-Gm-Message-State: AOJu0YwJzqU1ef+MqXYMP6FyrtqZEG4GgVjb5KR+EIBsMJghMFZLFWZI sJpMNd9Y0IP08nSrLlbXLDMuUpr0HQAFvxQ+dnSpP6yi+UGdIlo4QhXZxYeKbDS6zhP2ufzc8Xe NwyIhQA10JHeKXUYSVNoYDhmS4uO6t8CllqEoBtlt2O5gBFXL2JTOAVauZwzdzLlniG3xvyhuy+ khGtYpp3Qd6Dus0PIb+25/8qadrgWXPo9QIyyqy1AKCD2Q5w== X-Google-Smtp-Source: AGHT+IFZ5uA3TE1PzDqrBDii3tTQdJlfOOOI2NJYX11YRn6pWcqBNDGUrZQI65VWcQZMbqHoPwpLzQ== X-Received: by 2002:a05:6a00:4fd6:b0:6ec:fda1:4b7b with SMTP id d2e1a72fcca58-6f4e0374022mr15998377b3a.24.1715697118079; Tue, 14 May 2024 07:31:58 -0700 (PDT) Received: from localhost.localdomain ([192.19.234.250]) by smtp.gmail.com with ESMTPSA id 41be03b00d2f7-63560731046sm7849104a12.67.2024.05.14.07.31.54 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 14 May 2024 07:31:57 -0700 (PDT) From: Ranjan Kumar To: linux-scsi@vger.kernel.org, martin.petersen@oracle.com Cc: rajsekhar.chundru@broadcom.com, sathya.prakash@broadcom.com, sumit.saxena@broadcom.com, chandrakanth.patil@broadcom.com, prayas.patel@broadcom.com, Ranjan Kumar Subject: [PATCH v1 1/6] mpi3mr: HDB allocation and posting for hardware and Firmware buffers Date: Tue, 14 May 2024 19:58:53 +0530 Message-Id: <20240514142858.51992-2-ranjan.kumar@broadcom.com> X-Mailer: git-send-email 2.31.1 In-Reply-To: <20240514142858.51992-1-ranjan.kumar@broadcom.com> References: <20240514142858.51992-1-ranjan.kumar@broadcom.com> Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 This patch adds functions require to allocate and post firmware and hardware diagnostic buffers to the controller and to setup automatic diagnostic capture triggers Signed-off-by: Sathya Prakash Signed-off-by: Ranjan Kumar --- drivers/scsi/mpi3mr/mpi/mpi30_tool.h | 44 +++ drivers/scsi/mpi3mr/mpi3mr.h | 74 +++++ drivers/scsi/mpi3mr/mpi3mr_app.c | 479 +++++++++++++++++++++++++++ drivers/scsi/mpi3mr/mpi3mr_fw.c | 193 ++++++++++- 4 files changed, 789 insertions(+), 1 deletion(-) create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_tool.h diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_tool.h b/drivers/scsi/mpi3mr/mpi/mpi30_tool.h new file mode 100644 index 000000000000..3b960893870f --- /dev/null +++ b/drivers/scsi/mpi3mr/mpi/mpi30_tool.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2016-2024 Broadcom Inc. All rights reserved. + */ +#ifndef MPI30_TOOL_H +#define MPI30_TOOL_H 1 + +#define MPI3_DIAG_BUFFER_TYPE_TRACE (0x01) +#define MPI3_DIAG_BUFFER_TYPE_FW (0x02) +#define MPI3_DIAG_BUFFER_ACTION_RELEASE (0x01) + +struct mpi3_diag_buffer_post_request { + __le16 host_tag; + u8 ioc_use_only02; + u8 function; + __le16 ioc_use_only04; + u8 ioc_use_only06; + u8 msg_flags; + __le16 change_count; + __le16 reserved0a; + u8 type; + u8 reserved0d; + __le16 reserved0e; + __le64 address; + __le32 length; + __le32 reserved1c; +}; + +struct mpi3_diag_buffer_manage_request { + __le16 host_tag; + u8 ioc_use_only02; + u8 function; + __le16 ioc_use_only04; + u8 ioc_use_only06; + u8 msg_flags; + __le16 change_count; + __le16 reserved0a; + u8 type; + u8 action; + __le16 reserved0e; +}; + + +#endif diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h index d1c93978f28a..4ef96c39c832 100644 --- a/drivers/scsi/mpi3mr/mpi3mr.h +++ b/drivers/scsi/mpi3mr/mpi3mr.h @@ -47,6 +47,7 @@ #include "mpi/mpi30_ioc.h" #include "mpi/mpi30_sas.h" #include "mpi/mpi30_pci.h" +#include "mpi/mpi30_tool.h" #include "mpi3mr_debug.h" /* Global list and lock for storing multiple adapters managed by the driver */ @@ -187,6 +188,13 @@ extern atomic64_t event_counter; #define MPI3MR_HARD_SECURE_DEVICE 0x08 #define MPI3MR_TAMPERED_DEVICE 0x0C +#define MPI3MR_DEFAULT_HDB_MAX_SZ (4 * 1024 * 1024) +#define MPI3MR_DEFAULT_HDB_DEC_SZ (1 * 1024 * 1024) +#define MPI3MR_DEFAULT_HDB_MIN_SZ (2 * 1024 * 1024) +#define MPI3MR_MAX_NUM_HDB 2 + +#define MPI3MR_HDB_TRIGGER_TYPE_GLOBAL 3 + /* SGE Flag definition */ #define MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST \ (MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE | MPI3_SGE_FLAGS_DLAS_SYSTEM | \ @@ -210,6 +218,7 @@ extern atomic64_t event_counter; #define MPI3MR_WRITE_SAME_MAX_LEN_256_BLKS 256 #define MPI3MR_WRITE_SAME_MAX_LEN_2048_BLKS 2048 + /** * struct mpi3mr_nvme_pt_sge - Structure to store SGEs for NVMe * Encapsulated commands. @@ -289,6 +298,8 @@ enum mpi3mr_reset_reason { MPI3MR_RESET_FROM_PELABORT_TIMEOUT = 22, MPI3MR_RESET_FROM_SYSFS = 23, MPI3MR_RESET_FROM_SYSFS_TIMEOUT = 24, + MPI3MR_RESET_FROM_DIAG_BUFFER_POST_TIMEOUT = 25, + MPI3MR_RESET_FROM_DIAG_BUFFER_RELEASE_TIMEOUT = 26, MPI3MR_RESET_FROM_FIRMWARE = 27, MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT = 29, MPI3MR_RESET_FROM_SAS_TRANSPORT_TIMEOUT = 30, @@ -327,6 +338,9 @@ struct mpi3mr_ioc_facts { u32 ioc_capabilities; struct mpi3mr_compimg_ver fw_ver; u32 mpi_version; + u32 diag_trace_sz; + u32 diag_fw_sz; + u32 diag_drvr_sz; u16 max_reqs; u16 product_id; u16 op_req_sz; @@ -852,6 +866,41 @@ struct mpi3mr_drv_cmd { struct mpi3mr_drv_cmd *drv_cmd); }; +/** + * union mpi3mr_trigger_data - Trigger data information + * @fault: Fault code + * @global: Global trigger data + * @element: element trigger data + */ +union mpi3mr_trigger_data { + u16 fault; + u64 global; + union mpi3_driver2_trigger_element element; +}; + +/** + * struct diag_buffer_desc - memory descriptor structure to + * store virtual, dma addresses, size, buffer status for host + * diagnostic buffers. + * + * @type: Buffer type + * @trigger_data: Trigger data + * @trigger_type: Trigger type + * @status: Buffer status + * @size: Buffer size + * @addr: Virtual address + * @dma_addr: Buffer DMA address + */ +struct diag_buffer_desc { + u8 type; + union mpi3mr_trigger_data trigger_data; + u8 trigger_type; + u8 status; + u32 size; + void *addr; + dma_addr_t dma_addr; +}; + /** * struct dma_memory_desc - memory descriptor structure to store * virtual address, dma address and size for any generic dma @@ -1054,6 +1103,11 @@ struct scmd_priv { * @sas_node_lock: Lock to protect SAS node list * @hba_port_table_list: List of HBA Ports * @enclosure_list: List of Enclosure objects + * @diag_buffers: Host diagnostic buffers + * @driver_pg2: Driver page 2 pointer + * @reply_trigger_present: Reply trigger present flag + * @event_trigger_present: Event trigger present flag + * @scsisense_trigger_present: Scsi sense trigger present flag * @ioctl_dma_pool: DMA pool for IOCTL data buffers * @ioctl_sge: DMA buffer descriptors for IOCTL data * @ioctl_chain_sge: DMA buffer descriptor for IOCTL chain @@ -1250,6 +1304,12 @@ struct mpi3mr_ioc { struct dma_memory_desc ioctl_chain_sge; struct dma_memory_desc ioctl_resp_sge; bool ioctl_sges_allocated; + bool reply_trigger_present; + bool event_trigger_present; + bool scsisense_trigger_present; + struct diag_buffer_desc diag_buffers[MPI3MR_MAX_NUM_HDB]; + struct mpi3_driver_page2 *driver_pg2; + spinlock_t trigger_lock; }; /** @@ -1407,6 +1467,8 @@ int mpi3mr_cfg_set_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc, struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz); int mpi3mr_cfg_get_driver_pg1(struct mpi3mr_ioc *mrioc, struct mpi3_driver_page1 *driver_pg1, u16 pg_sz); +int mpi3mr_cfg_get_driver_pg2(struct mpi3mr_ioc *mrioc, + struct mpi3_driver_page2 *driver_pg2, u16 pg_sz, u8 page_type); u8 mpi3mr_is_expander_device(u16 device_info); int mpi3mr_expander_add(struct mpi3mr_ioc *mrioc, u16 handle); @@ -1440,4 +1502,16 @@ void mpi3mr_free_enclosure_list(struct mpi3mr_ioc *mrioc); int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc); void mpi3mr_expander_node_remove(struct mpi3mr_ioc *mrioc, struct mpi3mr_sas_node *sas_expander); +void mpi3mr_alloc_diag_bufs(struct mpi3mr_ioc *mrioc); +int mpi3mr_post_diag_bufs(struct mpi3mr_ioc *mrioc); +int mpi3mr_issue_diag_buf_release(struct mpi3mr_ioc *mrioc, + struct diag_buffer_desc *diag_buffer); +void mpi3mr_release_diag_bufs(struct mpi3mr_ioc *mrioc, u8 skip_rel_action); +void mpi3mr_set_trigger_data_in_hdb(struct diag_buffer_desc *hdb, + u8 type, union mpi3mr_trigger_data *trigger_data, bool force); +int mpi3mr_refresh_trigger(struct mpi3mr_ioc *mrioc, u8 page_type); +struct diag_buffer_desc *mpi3mr_diag_buffer_for_type(struct mpi3mr_ioc *mrioc, + u8 buf_type); +int mpi3mr_issue_diag_buf_post(struct mpi3mr_ioc *mrioc, + struct diag_buffer_desc *diag_buffer); #endif /*MPI3MR_H_INCLUDED*/ diff --git a/drivers/scsi/mpi3mr/mpi3mr_app.c b/drivers/scsi/mpi3mr/mpi3mr_app.c index 38f63bc7ef3b..f9571b615a8c 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_app.c +++ b/drivers/scsi/mpi3mr/mpi3mr_app.c @@ -11,6 +11,485 @@ #include #include +/** + * mpi3mr_alloc_trace_buffer: Allocate trace buffer + * @mrioc: Adapter instance reference + * @trace_size: Trace buffer size + * + * Allocate trace buffer + * Return: 0 on success, non-zero on failure. + */ +static int mpi3mr_alloc_trace_buffer(struct mpi3mr_ioc *mrioc, u32 trace_size) +{ + struct diag_buffer_desc *diag_buffer = &mrioc->diag_buffers[0]; + + diag_buffer->addr = dma_alloc_coherent(&mrioc->pdev->dev, + trace_size, &diag_buffer->dma_addr, GFP_KERNEL); + if (diag_buffer->addr) { + dprint_init(mrioc, "trace diag buffer is allocated successfully\n"); + return 0; + } + return -1; +} + +/** + * mpi3mr_alloc_diag_bufs - Allocate memory for diag buffers + * @mrioc: Adapter instance reference + * + * This functions checks whether the driver defined buffer sizes + * are greater than IOCFacts provided controller local buffer + * sizes and if the driver defined sizes are more then the + * driver allocates the specific buffer by reading driver page1 + * + * Return: Nothing. + */ +void mpi3mr_alloc_diag_bufs(struct mpi3mr_ioc *mrioc) +{ + struct diag_buffer_desc *diag_buffer; + struct mpi3_driver_page1 driver_pg1; + u32 trace_dec_size, trace_min_size, fw_dec_size, fw_min_size, + trace_size, fw_size; + u16 pg_sz = sizeof(driver_pg1); + int retval = 0; + bool retry = false; + + if (mrioc->diag_buffers[0].addr || mrioc->diag_buffers[1].addr) + return; + + retval = mpi3mr_cfg_get_driver_pg1(mrioc, &driver_pg1, pg_sz); + if (retval) { + ioc_warn(mrioc, + "%s: driver page 1 read failed, allocating trace\n" + "and firmware diag buffers of default size\n", __func__); + trace_size = fw_size = MPI3MR_DEFAULT_HDB_MAX_SZ; + trace_dec_size = fw_dec_size = MPI3MR_DEFAULT_HDB_DEC_SZ; + trace_min_size = fw_min_size = MPI3MR_DEFAULT_HDB_MIN_SZ; + + } else { + trace_size = driver_pg1.host_diag_trace_max_size * 1024; + trace_dec_size = driver_pg1.host_diag_trace_decrement_size + * 1024; + trace_min_size = driver_pg1.host_diag_trace_min_size * 1024; + fw_size = driver_pg1.host_diag_fw_max_size * 1024; + fw_dec_size = driver_pg1.host_diag_fw_decrement_size * 1024; + fw_min_size = driver_pg1.host_diag_fw_min_size * 1024; + dprint_init(mrioc, + "%s:trace diag buffer sizes read from driver\n" + "page1: maximum size = %dKB, decrement size = %dKB\n" + ", minimum size = %dKB\n", __func__, driver_pg1.host_diag_trace_max_size, + driver_pg1.host_diag_trace_decrement_size, + driver_pg1.host_diag_trace_min_size); + dprint_init(mrioc, + "%s:firmware diag buffer sizes read from driver\n" + "page1: maximum size = %dKB, decrement size = %dKB\n" + ", minimum size = %dKB\n", __func__, driver_pg1.host_diag_fw_max_size, + driver_pg1.host_diag_fw_decrement_size, + driver_pg1.host_diag_fw_min_size); + if ((trace_size == 0) && (fw_size == 0)) + return; + } + + +retry_trace: + diag_buffer = &mrioc->diag_buffers[0]; + diag_buffer->type = MPI3_DIAG_BUFFER_TYPE_TRACE; + diag_buffer->status = MPI3MR_HDB_BUFSTATUS_NOT_ALLOCATED; + if ((mrioc->facts.diag_trace_sz < trace_size) && (trace_size >= + trace_min_size)) { + if (!retry) + dprint_init(mrioc, + "trying to allocate trace diag buffer of size = %dKB\n", + trace_size / 1024); + if (mpi3mr_alloc_trace_buffer(mrioc, trace_size)) { + retry = true; + trace_size -= trace_dec_size; + dprint_init(mrioc, "trace diag buffer allocation failed\n" + "retrying smaller size %dKB\n", trace_size / 1024); + goto retry_trace; + } else + diag_buffer->size = trace_size; + } + + retry = false; +retry_fw: + + diag_buffer = &mrioc->diag_buffers[1]; + + diag_buffer->type = MPI3_DIAG_BUFFER_TYPE_FW; + diag_buffer->status = MPI3MR_HDB_BUFSTATUS_NOT_ALLOCATED; + if ((mrioc->facts.diag_fw_sz < fw_size) && (fw_size >= fw_min_size)) { + diag_buffer->addr = dma_alloc_coherent(&mrioc->pdev->dev, + fw_size, &diag_buffer->dma_addr, GFP_KERNEL); + if (!retry) + dprint_init(mrioc, + "%s:trying to allocate firmware diag buffer of size = %dKB\n", + __func__, fw_size / 1024); + if (diag_buffer->addr) { + dprint_init(mrioc, "%s:firmware diag buffer allocated successfully\n", + __func__); + diag_buffer->size = fw_size; + } else { + retry = true; + fw_size -= fw_dec_size; + dprint_init(mrioc, "%s:trace diag buffer allocation failed,\n" + "retrying smaller size %dKB\n", + __func__, fw_size / 1024); + goto retry_fw; + } + } +} + +/** + * mpi3mr_issue_diag_buf_post - Send diag buffer post req + * @mrioc: Adapter instance reference + * @diag_buffer: Diagnostic buffer descriptor + * + * Issue diagnostic buffer post MPI request through admin queue + * and wait for the completion of it or time out. + * + * Return: 0 on success, non-zero on failures. + */ +int mpi3mr_issue_diag_buf_post(struct mpi3mr_ioc *mrioc, + struct diag_buffer_desc *diag_buffer) +{ + struct mpi3_diag_buffer_post_request diag_buf_post_req; + u8 prev_status; + int retval = 0; + + memset(&diag_buf_post_req, 0, sizeof(diag_buf_post_req)); + mutex_lock(&mrioc->init_cmds.mutex); + if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { + dprint_bsg_err(mrioc, "%s: command is in use\n", __func__); + mutex_unlock(&mrioc->init_cmds.mutex); + return -1; + } + mrioc->init_cmds.state = MPI3MR_CMD_PENDING; + mrioc->init_cmds.is_waiting = 1; + mrioc->init_cmds.callback = NULL; + diag_buf_post_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); + diag_buf_post_req.function = MPI3_FUNCTION_DIAG_BUFFER_POST; + diag_buf_post_req.type = diag_buffer->type; + diag_buf_post_req.address = le64_to_cpu(diag_buffer->dma_addr); + diag_buf_post_req.length = le32_to_cpu(diag_buffer->size); + + dprint_bsg_info(mrioc, "%s: posting diag buffer type %d\n", __func__, + diag_buffer->type); + prev_status = diag_buffer->status; + diag_buffer->status = MPI3MR_HDB_BUFSTATUS_POSTED_UNPAUSED; + init_completion(&mrioc->init_cmds.done); + retval = mpi3mr_admin_request_post(mrioc, &diag_buf_post_req, + sizeof(diag_buf_post_req), 1); + if (retval) { + dprint_bsg_err(mrioc, "%s: admin request post failed\n", + __func__); + goto out_unlock; + } + wait_for_completion_timeout(&mrioc->init_cmds.done, + (MPI3MR_INTADMCMD_TIMEOUT * HZ)); + if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { + mrioc->init_cmds.is_waiting = 0; + dprint_bsg_err(mrioc, "%s: command timedout\n", __func__); + mpi3mr_check_rh_fault_ioc(mrioc, + MPI3MR_RESET_FROM_DIAG_BUFFER_POST_TIMEOUT); + retval = -1; + goto out_unlock; + } + if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) + != MPI3_IOCSTATUS_SUCCESS) { + dprint_bsg_err(mrioc, + "%s: command failed, buffer_type (%d) ioc_status(0x%04x) log_info(0x%08x)\n", + __func__, diag_buffer->type, + (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), + mrioc->init_cmds.ioc_loginfo); + retval = -1; + goto out_unlock; + } + dprint_bsg_info(mrioc, "%s: diag buffer type %d posted successfully\n", + __func__, diag_buffer->type); + +out_unlock: + if (retval) + diag_buffer->status = prev_status; + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; + mutex_unlock(&mrioc->init_cmds.mutex); + return retval; +} + +/** + * mpi3mr_post_diag_bufs - Post diag buffers to the controller + * @mrioc: Adapter instance reference + * + * This function calls helper function to post both trace and + * firmware buffers to the controller. + * + * Return: None + */ +int mpi3mr_post_diag_bufs(struct mpi3mr_ioc *mrioc) +{ + u8 i; + struct diag_buffer_desc *diag_buffer; + + for (i = 0; i < MPI3MR_MAX_NUM_HDB; i++) { + diag_buffer = &mrioc->diag_buffers[i]; + if (!(diag_buffer->addr)) + continue; + if (mpi3mr_issue_diag_buf_post(mrioc, diag_buffer)) + return -1; + } + return 0; +} + +/** + * mpi3mr_issue_diag_buf_release - Send diag buffer release req + * @mrioc: Adapter instance reference + * @diag_buffer: Diagnostic buffer descriptor + * + * Issue diagnostic buffer manage MPI request with release + * action request through admin queue and wait for the + * completion of it or time out. + * + * Return: 0 on success, non-zero on failures. + */ +int mpi3mr_issue_diag_buf_release(struct mpi3mr_ioc *mrioc, + struct diag_buffer_desc *diag_buffer) +{ + struct mpi3_diag_buffer_manage_request diag_buf_manage_req; + int retval = 0; + + if ((diag_buffer->status != MPI3MR_HDB_BUFSTATUS_POSTED_UNPAUSED) && + (diag_buffer->status != MPI3MR_HDB_BUFSTATUS_POSTED_PAUSED)) + return retval; + + memset(&diag_buf_manage_req, 0, sizeof(diag_buf_manage_req)); + mutex_lock(&mrioc->init_cmds.mutex); + if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { + dprint_reset(mrioc, "%s: command is in use\n", __func__); + mutex_unlock(&mrioc->init_cmds.mutex); + return -1; + } + mrioc->init_cmds.state = MPI3MR_CMD_PENDING; + mrioc->init_cmds.is_waiting = 1; + mrioc->init_cmds.callback = NULL; + diag_buf_manage_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); + diag_buf_manage_req.function = MPI3_FUNCTION_DIAG_BUFFER_MANAGE; + diag_buf_manage_req.type = diag_buffer->type; + diag_buf_manage_req.action = MPI3_DIAG_BUFFER_ACTION_RELEASE; + + + dprint_reset(mrioc, "%s: releasing diag buffer type %d\n", __func__, + diag_buffer->type); + init_completion(&mrioc->init_cmds.done); + retval = mpi3mr_admin_request_post(mrioc, &diag_buf_manage_req, + sizeof(diag_buf_manage_req), 1); + if (retval) { + dprint_reset(mrioc, "%s: admin request post failed\n", __func__); + mpi3mr_set_trigger_data_in_hdb(diag_buffer, + MPI3MR_HDB_TRIGGER_TYPE_UNKNOWN, NULL, 1); + goto out_unlock; + } + wait_for_completion_timeout(&mrioc->init_cmds.done, + (MPI3MR_INTADMCMD_TIMEOUT * HZ)); + if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { + mrioc->init_cmds.is_waiting = 0; + dprint_reset(mrioc, "%s: command timedout\n", __func__); + mpi3mr_check_rh_fault_ioc(mrioc, + MPI3MR_RESET_FROM_DIAG_BUFFER_RELEASE_TIMEOUT); + retval = -1; + goto out_unlock; + } + if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) + != MPI3_IOCSTATUS_SUCCESS) { + dprint_reset(mrioc, + "%s: command failed, buffer_type (%d) ioc_status(0x%04x) log_info(0x%08x)\n", + __func__, diag_buffer->type, + (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), + mrioc->init_cmds.ioc_loginfo); + retval = -1; + goto out_unlock; + } + dprint_reset(mrioc, "%s: diag buffer type %d released successfully\n", + __func__, diag_buffer->type); + +out_unlock: + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; + mutex_unlock(&mrioc->init_cmds.mutex); + return retval; +} + +/** + * mpi3mr_get_num_trigger - Gets number of HDB triggers + * @mrioc: Adapter instance reference + * @num_triggers: Number of triggers + * @page_action: Page action + * + * This function reads number of triggers by reading driver page + * 2 + * + * Return: 0 on success and proper error codes on failure + */ +static int mpi3mr_get_num_trigger(struct mpi3mr_ioc *mrioc, u8 *num_triggers, + u8 page_action) +{ + struct mpi3_driver_page2 drvr_page2; + int retval = 0; + + *num_triggers = 0; + + retval = mpi3mr_cfg_get_driver_pg2(mrioc, &drvr_page2, + sizeof(struct mpi3_driver_page2), page_action); + + if (retval) { + dprint_init(mrioc, "%s: driver page 2 read failed\n", __func__); + return retval; + } + *num_triggers = drvr_page2.num_triggers; + return retval; +} + +/** + * mpi3mr_refresh_trigger - Handler for Refresh trigger BSG + * @mrioc: Adapter instance reference + * @page_action: Page action + * + * This function caches the driver page 2 in the driver's memory + * by reading driver page 2 from the controller for a given page + * type and updates the HDB trigger values + * + * Return: 0 on success and proper error codes on failure + */ +int mpi3mr_refresh_trigger(struct mpi3mr_ioc *mrioc, u8 page_action) +{ + u16 pg_sz = sizeof(struct mpi3_driver_page2); + struct mpi3_driver_page2 *drvr_page2 = NULL; + u8 trigger_type, num_triggers; + int retval; + int i = 0; + unsigned long flags; + + retval = mpi3mr_get_num_trigger(mrioc, &num_triggers, page_action); + + if (retval) + goto out; + + pg_sz = offsetof(struct mpi3_driver_page2, trigger) + + (num_triggers * sizeof(union mpi3_driver2_trigger_element)); + drvr_page2 = kzalloc(pg_sz, GFP_KERNEL); + if (!drvr_page2) { + retval = -ENOMEM; + goto out; + } + + retval = mpi3mr_cfg_get_driver_pg2(mrioc, drvr_page2, pg_sz, page_action); + if (retval) { + dprint_init(mrioc, "%s: driver page 2 read failed\n", __func__); + kfree(drvr_page2); + goto out; + } + spin_lock_irqsave(&mrioc->trigger_lock, flags); + kfree(mrioc->driver_pg2); + mrioc->driver_pg2 = drvr_page2; + mrioc->reply_trigger_present = false; + mrioc->event_trigger_present = false; + mrioc->scsisense_trigger_present = false; + + for (i = 0; (i < mrioc->driver_pg2->num_triggers); i++) { + trigger_type = mrioc->driver_pg2->trigger[i].event.type; + switch (trigger_type) { + case MPI3_DRIVER2_TRIGGER_TYPE_REPLY: + mrioc->reply_trigger_present = true; + break; + case MPI3_DRIVER2_TRIGGER_TYPE_EVENT: + mrioc->event_trigger_present = true; + break; + case MPI3_DRIVER2_TRIGGER_TYPE_SCSI_SENSE: + mrioc->scsisense_trigger_present = true; + break; + default: + break; + } + } + spin_unlock_irqrestore(&mrioc->trigger_lock, flags); +out: + return retval; +} + +/** + * mpi3mr_release_diag_bufs - Release diag buffers + * @mrioc: Adapter instance reference + * @skip_rel_action: Skip release action and set buffer state + * + * This function calls helper function to release both trace and + * firmware buffers from the controller. + * + * Return: None + */ +void mpi3mr_release_diag_bufs(struct mpi3mr_ioc *mrioc, u8 skip_rel_action) +{ + u8 i; + struct diag_buffer_desc *diag_buffer; + + for (i = 0; i < MPI3MR_MAX_NUM_HDB; i++) { + diag_buffer = &mrioc->diag_buffers[i]; + if (!(diag_buffer->addr)) + continue; + if (diag_buffer->status == MPI3MR_HDB_BUFSTATUS_RELEASED) + continue; + if (!skip_rel_action) + mpi3mr_issue_diag_buf_release(mrioc, diag_buffer); + diag_buffer->status = MPI3MR_HDB_BUFSTATUS_RELEASED; + atomic64_inc(&event_counter); + } +} + +/** + * mpi3mr_set_trigger_data_in_hdb - Updates HDB trigger type and + * trigger data + * + * @hdb: HDB pointer + * @type: Trigger type + * @data: Trigger data + * @force: Trigger overwrite flag + * + * Updates trigger type and trigger data based on parameter + * passed to this function + * + * Return: Nothing + */ +void mpi3mr_set_trigger_data_in_hdb(struct diag_buffer_desc *hdb, + u8 type, union mpi3mr_trigger_data *trigger_data, bool force) +{ + if ((!force) && (hdb->trigger_type != MPI3MR_HDB_TRIGGER_TYPE_UNKNOWN)) + return; + hdb->trigger_type = type; + if (!trigger_data) + memset(&hdb->trigger_data, 0, sizeof(*trigger_data)); + else + memcpy(&hdb->trigger_data, trigger_data, sizeof(*trigger_data)); +} + +/** + * mpi3mr_diag_buffer_for_type - returns buffer desc for type + * @mrioc: Adapter instance reference + * @buf_type: Diagnostic buffer type + * + * Identifies matching diag descriptor from mrioc for given diag + * buffer type. + * + * Return: diag buffer descriptor on success, NULL on failures. + */ + +struct diag_buffer_desc * +mpi3mr_diag_buffer_for_type(struct mpi3mr_ioc *mrioc, u8 buf_type) +{ + u8 i; + + for (i = 0; i < MPI3MR_MAX_NUM_HDB; i++) { + if (mrioc->diag_buffers[i].type == buf_type) + return &mrioc->diag_buffers[i]; + } + return NULL; +} + /** * mpi3mr_bsg_pel_abort - sends PEL abort request * @mrioc: Adapter instance reference diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c index c2a22e96f7b7..fbd6f32f79ce 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c @@ -3003,7 +3003,11 @@ static void mpi3mr_process_factsdata(struct mpi3mr_ioc *mrioc, mrioc->facts.sge_mod_shift = facts_data->sge_modifier_shift; mrioc->facts.shutdown_timeout = le16_to_cpu(facts_data->shutdown_timeout); - + mrioc->facts.diag_trace_sz = + le32_to_cpu(facts_data->diag_trace_size); + mrioc->facts.diag_fw_sz = + le32_to_cpu(facts_data->diag_fw_size); + mrioc->facts.diag_drvr_sz = le32_to_cpu(facts_data->diag_driver_size); mrioc->facts.max_dev_per_tg = facts_data->max_devices_per_throttle_group; mrioc->facts.io_throttle_data_length = @@ -3681,6 +3685,94 @@ static const struct { { MPI3_IOCFACTS_CAPABILITY_MULTIPATH_SUPPORTED, "MultiPath" }, }; +/** + * mpi3mr_repost_diag_bufs - repost host diag buffers + * @mrioc: Adapter instance reference + * + * repost firmware and trace diag buffers based on global + * trigger flag from driver page 2 + * + * Return: 0 on success, non-zero on failures. + */ +static int mpi3mr_repost_diag_bufs(struct mpi3mr_ioc *mrioc) +{ + u64 global_trigger; + union mpi3mr_trigger_data prev_trigger_data; + struct diag_buffer_desc *trace_hdb = NULL; + struct diag_buffer_desc *fw_hdb = NULL; + int retval = 0; + bool trace_repost_needed = false; + bool fw_repost_needed = false; + u8 prev_trigger_type; + + retval = mpi3mr_refresh_trigger(mrioc, MPI3_CONFIG_ACTION_READ_CURRENT); + if (retval) + return -1; + + trace_hdb = mpi3mr_diag_buffer_for_type(mrioc, + MPI3_DIAG_BUFFER_TYPE_TRACE); + + if (trace_hdb && + trace_hdb->status != MPI3MR_HDB_BUFSTATUS_NOT_ALLOCATED && + trace_hdb->trigger_type != MPI3MR_HDB_TRIGGER_TYPE_GLOBAL && + trace_hdb->trigger_type != MPI3MR_HDB_TRIGGER_TYPE_ELEMENT) + trace_repost_needed = true; + + fw_hdb = mpi3mr_diag_buffer_for_type(mrioc, MPI3_DIAG_BUFFER_TYPE_FW); + + if (fw_hdb && fw_hdb->status != MPI3MR_HDB_BUFSTATUS_NOT_ALLOCATED && + fw_hdb->trigger_type != MPI3MR_HDB_TRIGGER_TYPE_GLOBAL && + fw_hdb->trigger_type != MPI3MR_HDB_TRIGGER_TYPE_ELEMENT) + fw_repost_needed = true; + + if (trace_repost_needed || fw_repost_needed) { + global_trigger = le64_to_cpu(mrioc->driver_pg2->global_trigger); + if (global_trigger & + MPI3_DRIVER2_GLOBALTRIGGER_POST_DIAG_TRACE_DISABLED) + trace_repost_needed = false; + if (global_trigger & + MPI3_DRIVER2_GLOBALTRIGGER_POST_DIAG_FW_DISABLED) + fw_repost_needed = false; + } + + if (trace_repost_needed) { + prev_trigger_type = trace_hdb->trigger_type; + memcpy(&prev_trigger_data, &trace_hdb->trigger_data, + sizeof(trace_hdb->trigger_data)); + retval = mpi3mr_issue_diag_buf_post(mrioc, trace_hdb); + if (!retval) { + dprint_init(mrioc, "trace diag buffer reposted"); + mpi3mr_set_trigger_data_in_hdb(trace_hdb, + MPI3MR_HDB_TRIGGER_TYPE_UNKNOWN, NULL, 1); + } else { + trace_hdb->trigger_type = prev_trigger_type; + memcpy(&trace_hdb->trigger_data, &prev_trigger_data, + sizeof(prev_trigger_data)); + ioc_err(mrioc, "trace diag buffer repost failed"); + return -1; + } + } + + if (fw_repost_needed) { + prev_trigger_type = fw_hdb->trigger_type; + memcpy(&prev_trigger_data, &fw_hdb->trigger_data, + sizeof(fw_hdb->trigger_data)); + retval = mpi3mr_issue_diag_buf_post(mrioc, fw_hdb); + if (!retval) { + dprint_init(mrioc, "firmware diag buffer reposted"); + mpi3mr_set_trigger_data_in_hdb(fw_hdb, + MPI3MR_HDB_TRIGGER_TYPE_UNKNOWN, NULL, 1); + } else { + fw_hdb->trigger_type = prev_trigger_type; + memcpy(&fw_hdb->trigger_data, &prev_trigger_data, + sizeof(prev_trigger_data)); + ioc_err(mrioc, "firmware diag buffer repost failed"); + return -1; + } + } + return retval; +} + /** * mpi3mr_print_ioc_info - Display controller information * @mrioc: Adapter instance reference @@ -3989,9 +4081,18 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc) } } + dprint_init(mrioc, "allocating host diag buffers\n"); + mpi3mr_alloc_diag_bufs(mrioc); + dprint_init(mrioc, "allocating ioctl dma buffers\n"); mpi3mr_alloc_ioctl_dma_memory(mrioc); + dprint_init(mrioc, "posting host diag buffers\n"); + retval = mpi3mr_post_diag_bufs(mrioc); + + if (retval) + ioc_warn(mrioc, "failed to post host diag buffers\n"); + if (!mrioc->init_cmds.reply) { retval = mpi3mr_alloc_reply_sense_bufs(mrioc); if (retval) { @@ -4144,6 +4245,17 @@ int mpi3mr_reinit_ioc(struct mpi3mr_ioc *mrioc, u8 is_resume) mpi3mr_print_ioc_info(mrioc); + if (is_resume) { + dprint_reset(mrioc, "posting host diag buffers\n"); + retval = mpi3mr_post_diag_bufs(mrioc); + if (retval) + ioc_warn(mrioc, "failed to post host diag buffers\n"); + } else { + retval = mpi3mr_repost_diag_bufs(mrioc); + if (retval) + ioc_warn(mrioc, "failed to re post host diag buffers\n"); + } + dprint_reset(mrioc, "sending ioc_init\n"); retval = mpi3mr_issue_iocinit(mrioc); if (retval) { @@ -4409,6 +4521,7 @@ void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc) { u16 i; struct mpi3mr_intr_info *intr_info; + struct diag_buffer_desc *diag_buffer; mpi3mr_free_enclosure_list(mrioc); mpi3mr_free_ioctl_dma_memory(mrioc); @@ -4543,6 +4656,19 @@ void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc) mrioc->pel_seqnum_virt = NULL; } + for (i = 0; i < MPI3MR_MAX_NUM_HDB; i++) { + diag_buffer = &mrioc->diag_buffers[i]; + if (diag_buffer->addr) { + dma_free_coherent(&mrioc->pdev->dev, + diag_buffer->size, diag_buffer->addr, + diag_buffer->dma_addr); + diag_buffer->addr = NULL; + diag_buffer->size = 0; + diag_buffer->type = 0; + diag_buffer->status = 0; + } + } + kfree(mrioc->throttle_groups); mrioc->throttle_groups = NULL; @@ -5016,6 +5142,9 @@ int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc, if ((!snapdump) && (reset_reason != MPI3MR_RESET_FROM_FAULT_WATCH) && (reset_reason != MPI3MR_RESET_FROM_FIRMWARE) && (reset_reason != MPI3MR_RESET_FROM_CIACTIV_FAULT)) { + dprint_reset(mrioc, + "soft_reset_handler: releasing host diagnostic buffers\n"); + mpi3mr_release_diag_bufs(mrioc, 0); for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++) mrioc->event_masks[i] = -1; @@ -5075,6 +5204,7 @@ int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc, mrioc->prepare_for_reset_timeout_counter = 0; } mpi3mr_memset_buffers(mrioc); + mpi3mr_release_diag_bufs(mrioc, 1); retval = mpi3mr_reinit_ioc(mrioc, 0); if (retval) { pr_err(IOCNAME "reinit after soft reset failed: reason %d\n", @@ -5954,3 +6084,64 @@ int mpi3mr_cfg_get_driver_pg1(struct mpi3mr_ioc *mrioc, out_failed: return -1; } + +/** + * mpi3mr_cfg_get_driver_pg2 - Read current driver page2 + * @mrioc: Adapter instance reference + * @driver_pg2: Pointer to return driver page 2 + * @pg_sz: Size of the memory allocated to the page pointer + * @page_action: Page action + * + * This is handler for config page read for the driver page2. + * This routine checks ioc_status to decide whether the page + * read is success or not. + * + * Return: 0 on success, non-zero on failure. + */ +int mpi3mr_cfg_get_driver_pg2(struct mpi3mr_ioc *mrioc, + struct mpi3_driver_page2 *driver_pg2, u16 pg_sz, u8 page_action) +{ + struct mpi3_config_page_header cfg_hdr; + struct mpi3_config_request cfg_req; + u16 ioc_status = 0; + + memset(driver_pg2, 0, pg_sz); + memset(&cfg_hdr, 0, sizeof(cfg_hdr)); + memset(&cfg_req, 0, sizeof(cfg_req)); + + cfg_req.function = MPI3_FUNCTION_CONFIG; + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_DRIVER; + cfg_req.page_number = 2; + cfg_req.page_address = 0; + cfg_req.page_version = MPI3_DRIVER2_PAGEVERSION; + + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { + ioc_err(mrioc, "driver page2 header read failed\n"); + goto out_failed; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "driver page2 header read failed with\n" + "ioc_status(0x%04x)\n", + ioc_status); + goto out_failed; + } + cfg_req.action = page_action; + + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, driver_pg2, pg_sz)) { + ioc_err(mrioc, "driver page2 read failed\n"); + goto out_failed; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "driver page2 read failed with\n" + "ioc_status(0x%04x)\n", + ioc_status); + goto out_failed; + } + return 0; +out_failed: + return -1; +} +