diff --git a/Documentation/scsi/ChangeLog.ips b/Documentation/scsi/ChangeLog.ips
deleted file mode 100644
index 5019f5182bf4..000000000000
--- a/Documentation/scsi/ChangeLog.ips
+++ /dev/null
@@ -1,122 +0,0 @@
-IBM ServeRAID driver Change Log
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-        5.00.01  - Sarasota ( 5i ) adapters must always be scanned first  
-                 - Get rid on IOCTL_NEW_COMMAND code  
-                 - Add Extended DCDB Commands for Tape Support in 5I                  
-        
-        4.90.11  - Don't actually RESET unless it's physically required
-                 - Remove unused compile options
-        
-        4.90.08  - Data Corruption if First Scatter Gather Element is > 64K
-        
-        4.90.08  - Increase Delays in Flashing ( Trombone Only - 4H )        
-        
-        4.90.05  - Use New PCI Architecture to facilitate Hot Plug Development
-        
-        4.90.01  - Add ServeRAID Version Checking
-
-        4.80.26  - Clean up potential code problems ( Arjan's recommendations )
-        
-        4.80.21  - Change memcpy() to copy_to_user() in NVRAM Page 5 IOCTL path   
-        
-        4.80.20  - Set max_sectors in Scsi_Host structure ( if >= 2.4.7 kernel )
-                 - 5 second delay needed after resetting an i960 adapter
-        
-        4.80.14  - Take all semaphores off stack                    
-                 - Clean Up New_IOCTL path
-                   
-        4.80.04  - Eliminate calls to strtok() if 2.4.x or greater 
-                 - Adjustments to Device Queue Depth               
-
-        4.80.00  - Make ia64 Safe    
-        
-        4.72.01  - I/O Mapped Memory release ( so "insmod ips" does not Fail )    
-                 - Don't Issue Internal FFDC Command if there are Active Commands 
-                 - Close Window for getting too many IOCTL's active 
-                   
-        4.72.00  - Allow for a Scatter-Gather Element to exceed MAX_XFER Size     
-        
-        4.71.00  - Change all memory allocations to not use GFP_DMA flag 
-                 - Code Clean-Up for 2.4.x kernel      
-        
-        4.70.15  - Fix Breakup for very large ( non-SG ) requests
-        
-        4.70.13  - Don't release HA Lock in ips_next() until SC taken off queue  
-                 - Unregister SCSI device in ips_release()                        
-                 - Don't Send CDB's if we already know the device is not present  
-                 
-        4.70.12  - Corrective actions for bad controller ( during initialization )
-        
-        4.70.09  - Use a Common ( Large Buffer ) for Flashing from the JCRM CD    
-                 - Add IPSSEND Flash Support                                      
-                 - Set Sense Data for Unknown SCSI Command                        
-                 - Use Slot Number from NVRAM Page 5 
-                 - Restore caller's DCDB Structure
-                                       
-        4.20.14  - Update patch files for kernel 2.4.0-test5
-
-        4.20.13  - Fix some failure cases / reset code
-                 - Hook into the reboot_notifier to flush the controller
-                   cache
-
-        4.20.03 - Rename version to coincide with new release schedules
-                - Performance fixes
-                - Fix truncation of /proc files with cat
-                - Merge in changes through kernel 2.4.0test1ac21
-
-        4.10.13 - Fix for dynamic unload and proc file system
-
-        4.10.00 - Add support for ServeRAID 4M/4L
-
-        4.00.06 - Fix timeout with initial FFDC command
-
-        4.00.05 - Remove wish_block from init routine
-                - Use linux/spinlock.h instead of asm/spinlock.h for kernels
-                  2.3.18 and later
-                - Sync with other changes from the 2.3 kernels
-
-        4.00.04 - Rename structures/constants to be prefixed with IPS_
-
-        4.00.03 - Add alternative passthru interface
-                - Add ability to flash ServeRAID BIOS
-
-        4.00.02 - Fix problem with PT DCDB with no buffer
-
-        4.00.01 - Add support for First Failure Data Capture
-
-        4.00.00 - Add support for ServeRAID 4
-
-        3.60.02 - Make DCDB direction based on lookup table.
-                - Only allow one DCDB command to a SCSI ID at a time.
-
-        3.60.01 - Remove bogus error check in passthru routine.
-
-        3.60.00 - Bump max commands to 128 for use with ServeRAID
-                  firmware 3.60.
-                - Change version to 3.60 to coincide with ServeRAID release
-                  numbering.
-
-        1.00.00 - Initial Public Release
-                - Functionally equivalent to 0.99.05
-
-        0.99.05 - Fix an oops on certain passthru commands
-
-        0.99.04 - Fix race condition in the passthru mechanism
-                  -- this required the interface to the utilities to change
-                - Fix error recovery code
-
-        0.99.03 - Make interrupt routine handle all completed request on the
-                  adapter not just the first one
-                - Make sure passthru commands get woken up if we run out of
-                  SCBs
-                - Send all of the commands on the queue at once rather than
-                  one at a time since the card will support it.
-
-        0.99.02 - Added some additional debug statements to print out
-                  errors if an error occurs while trying to read/write
-                  to a logical drive (IPS_DEBUG).
-
-                - Fixed read/write errors when the adapter is using an
-                  8K stripe size.
-
