diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
deleted file mode 100644
index ccc48b8359bf..000000000000
--- a/Documentation/scsi/ChangeLog.lpfc
+++ /dev/null
@@ -1,1865 +0,0 @@
-Known issues :
-	* Please read the associated RELEASE-NOTES file !!!
-	* This source release intended for upstream kernel releases only!
-
-Changes from 20050323 to 20050413
-
-	* Changed version number to 8.0.28
-	* Fixed build warning for 2.6.12-rc2 kernels: mempool_alloc now
-	  requires a function which takes an unsigned int for gfp_flags.
-	* Removed pci dma sync calls to coherent/consistent pci memory.
-	* Merged patch from Christoph Hellwig <hch@lst.de>: split helpers
-	  for fabric and nport logins out of lpfc_cmpl_els_flogi.
-	* Removed sysfs attributes that are used to dump the various
-	  discovery lists.
-	* Fix for issue where not all luns are seen.  Search all lists
-	  other than unmap list in lpfc_find_target().  Otherwise INQUIRY
-	  to luns on nodes in NPR or other relevant states (PLOGI,
-	  PRLI...) are errored back and scan() terminates.
-	* Removed FC_TRANSPORT_PATCHESxxx defines.  They're in 2.6.12-rc1.
-	* Compare return value of lpfc_scsi_tgt_reset against SCSI
-	  midlayer codes SUCCESS/FAILED which that function returns rather
-	  than SLI return code.
-	* Removed extraneous calls to lpfc_sli_next_iotag which should
-	  only be called from lpfc_sli_submit_iocb.  Also make
-	  lpfc_sli_next_iotag static.
-	* Added PCI ID for LP10000-S.
-	* Changes in lpfc_abort_handler(): Return SUCCESS if we did not
-	  find command in both TX and TX completion queues.  Return ERROR
-	  if we timed out waiting for command to complete after abort was
-	  issued.
-	* Zero-out response sense length in lpfc_scsi_prep_cmnd to prevent
-	  interpretation of stale sense length when the command completes
-	  - was causing spurious 0710 messages.
-	* Moved clearing of host_scribble inside host_lock in IO
-	  completion path.
-	* Fixed a bunch of mixed tab/space indentation.
-	* Allow hex format numbers in sysfs attribute setting.  Fix
-	  application hang when invalid numbers are used in sysfs
-	  settings.
-	* Removed extra iotag allocation by lpfc_abort_handler.
-	* Clear host_scribble in the scsi_cmnd structure when failing in
-	  queuecommand.
-	* Changed logic at top of lpfc_abort_handler so that if the
-	  command's host_scibble field is NULL, return SUCCESS because the
-	  driver has already returned the command to the midlayer.
-
-Changes from 20050308 to 20050323
-
-	* Changed version number to 8.0.27
-	* Changed a few lines from patch submitted by Christoph Hellwig
-	  (3/19). MAILBOX_WSIZE * (uint32_t) is replaced with an
-	  equivalent MAILBOX_CMDSIZE macro.
-	* Merged patch from Christoph Hellwig (3/19): some misc patches
-	  against the latest drivers:
-	  - stop using volatile.  if you need special ordering use memory
-	    barriers but that doesn't seem to be the case here
-	  - switch lpfc_sli_pcimem_bcopy to take void * arguments.
-	  - remove typecast for constants - a U postfix marks them
-	    unsigned int in C
-	  - add a MAILBOX_CMD_SIZE macro, as most users of
-	    MAILBOX_CMD_WSIZE didn't really want the word count
-	  - kill struct lpfc_scsi_dma_buf and embedded the two members
-	    directly in struct lpfc_scsi_buf
-	  - don't call dma_sync function on allocations from
-	    pci_pool_alloc - it's only for streaming mappings (pci_map_*)
-	* Merged patch from Christoph Hellwig (3/19) - nlp_failMask isn't
-	  ever used by the driver, just reported to userspace (and that in
-	  a multi-value file which is against the sysfs guidelines).
-	* Change pci_module_init to pci_register_module() with appropriate
-	  ifdefs.
-	* Added #include <linux/dma-mapping.h> as required by the DMA
-	  32bit and 64bit defines on some archs.
-	* Merged patch from Christoph Hellwig (03/19) - fix initialization
-	  order - scsi_add_host must happen last from scsi POV. Also some
-	  minor style/comment fixups.
-	* Fixed use of TRANSPORT_PATCHES_V2 by changing to
-	  FC_TRANSPORT_PATCHES_V2.
-
-Changes from 20050223 to 20050308
-
-	* Changed version number to 8.0.26
-	* Revise TRANSPORT_PATCHES_V2 so that lpfc_target is removed and
-	  rport data is used instead. Removed device_queue_hash[].
-	* Changed RW attributes of scan_down, max_luns and fcp_bind_method
-	  to R only.
-	* Fixed RSCN handling during initial link initialization.
-	* Fixed issue with receiving PLOGI handling when node is on NPR
-	  list and marked for ADISC.
-	* Fixed RSCN timeout issues.
-	* Reduced severity of "SCSI layer issued abort device" message to
-	  KERN_WARNING.
-	* Feedback from Christoph Hellwig (on 2/5) - In the LPFC_EVT_SCAN
-	  case the caller already has the target ID handly, so pass that
-	  one in evt_arg1.
-	* Fix compile warning/resultant panic in
-	  lpfc_register_remote_port().
-
-Changes from 20050215 to 20050223
-
-	* Changed version number to 8.0.25
-	* Add appropriate comments to lpfc_sli.c.
-	* Use DMA_64BIT_MASK and DMA_32BIT_MASK defines instead of
-	  0xffffffffffffffffULL & 0xffffffffULL respectively.  Use pci
-	  equivalents instead of dma_set_mask and also modify condition
-	  clause to actually exit on error condition.
-	* Restart els timeout handler only if txcmplq_cnt. On submission,
-	  mod_timer the els_tmofunc.  This prevents the worker thread from
-	  waking up the els_tmo handler un-necessarily.  The thread was
-	  being woken up even when there were no pending els commands.
-	* Added new typedefs for abort and reset functions.
-	* Collapsed lpfc_sli_abort_iocb_xxx into a single function.
-	* Collapsed lpfc_sli_sum_iocb_xxx into a single function.
-	* Removed TXQ from all abort and reset handlers since it is never
-	  used.
-	* Fixed Oops panic in 8.0.23 (reported on SourceForge).  The
-	  driver was not handling LPFC_IO_POLL cases correctly in
-	  fast_ring_event and was setting the tgt_reset timeout to 0 in
-	  lpfc_reset_bus_handler.  This 0 timeout would not allow the FW
-	  to timeout ABTS's on bad targets and allow the driver to have an
-	  iocb on two lists.  Also split the lpfc_sli_ringtxcmpl_get
-	  function into two routines to match the fast and slow completion
-	  semantics - ELS completions worked for the wrong reasons.  Also
-	  provided new log message number - had two 0326 entries.
-	* Removed unused #define LPFC_SCSI_INITIAL_BPL_SIZE.
-	* Removed unused struct lpfc_node_farp_pend definition.
-	* Removed unused #define LPFC_SLIM2_PAGE_AREA.
-	* Changed zeros used as pointers to NULL.
-	* Removed unneeded braces around single line in lpfc_do_work.
-	* Close humongous memory leak in lpfc_sli.c - driver was losing 13
-	  iocbq structures per LIP.
-	* Removed last of GFP_ATOMIC allocations.
-	* Locks are not taken outside of nportdisc, hbadisc, els and most
-	  of the init, sli, mbox and ct groups of functions
-	* Fix comment for lpfc_sli_iocb_cmd_type to fit within 80 columns.
-	* Replaced wait_event() with wait_event_interruptible().
-	  wait_event() puts the woker thread in an UNINTERRUPTIBLE state
-	  causing it to figure in load average calculations. Also add a
-	  BUG_ON to the ret code of wait_event_interruptible() since the
-	  premise is that the worker thread is signal-immune.
-
-Changes from 20050208 to 20050215
-
-	* Changed version number to 8.0.24
-	* Fixed a memory leak of iocbq structure.  For ELS solicited iocbs
-	  sli layer now frees the response iocbs after processing it.
-	* Closed large memory leak -- we were losing 13 iocbq structures
-	  per LIP.
-	* Changing EIO and ENOMEM to -EIO and -ENOMEM respectively.
-	* Cleanup of lpfc_sli_iocb_cmd_type array and typing of iocb type.
-	* Implemented Christoph Hellwig's feedback from 02/05: Remove
-	  macros putLunHigh, putLunLow. Use lpfc_put_lun() inline instead.
-	* Integrated Christoph Hellwig's feedback from 02/05: Instead of
-	  cpu_to_be32(), use swab16((uint16_t)lun). This is the same as
-	  "swab16() on LE" and "<<16 on BE".
-	* Added updates for revised FC remote port patch (dev_loss_tmo
-	  moved to rport, hostdata renamed dd_data, add fc_remote_host()
-	  on shutdown).
-	* Removed unnecessary function prototype.
-	* Added code to prevent waking up worker thread after the exit of
-	  worker thread.  Fixes panic seen with insmod/rmmod testing with
-	  70 disks.
-	* Integrated Christoph Hellwig's patch from 1/30: Make some
-	  variables/code static (namely lpfcAlpaArray and
-	  process_nodev_timeout()).
-	* Integrated Christoph Hellwig's patch from 1/30: Use
-	  switch...case instead of if...else if...else if while decoding
-	  JDEC id.
-
-Changes from 20050201 to 20050208
-
-	* Changed version number to 8.0.23
-	* Make lpfc_work_done, lpfc_get_scsi_buf,
-	  lpfc_mbx_process_link_up, lpfc_mbx_issue_link_down and
-	  lpfc_sli_chipset_init static.
-	* Cleaned up references to list_head->next field in the driver.
-	* Replaced lpfc_discq_post_event with lpfc_workq_post_event.
-	* Implemented Christoph Hellwig's review from 2/5: Check for return
-	  values of kmalloc.
-	* Integrated Christoph Hellwig's patch from 1/30: Protecting
-	  scan_tmo and friends in !FC_TRANSPORT_PATCHES_V2 &&
-	  !USE_SCAN_TARGET.
-	* Integrated Christoph Hellwig's patch from 1/30: Some fixes in
-	  the evt handling area.
-	* Integrated Christoph Hellwig's patch from 1/30: Remove usage of
-	  intr_inited variable. The interrupt initialization from OS side
-	  now happens in lpfc_probe_one().
-	* Integrated Christoph Hellwig's patch from 1/30: remove shim
-	  lpfc_alloc_transport_attr - remove shim lpfc_alloc_shost_attrs -
-	  remove shim lpfc_scsi_host_init - allocate phba mem in scsi's
-	  hostdata readjust code so that they are no use after free's
-	  (don't use after scsi_host_put) - make lpfc_alloc_sysfs_attr
-	  return errors
-	* Fixed panic in lpfc_probe_one(). Do not delete in a list
-	  iterator that is not safe.
-	* Clean up fast lookup array of the fcp_ring when aborting iocbs.
-	* Following timeout handlers moved to the lpfc worker thread:
-	  lpfc_disc_timeout, lpfc_els_timeout, lpfc_mbox, lpfc_fdmi_tmo,
-	  lpfc_nodev_timeout, lpfc_els_retry_delay.
-	* Removed unused NLP_NS_NODE #define.
-	* Integrated Christoph Hellwig's patch from 1/30: remove unused
-	  lpfc_hba_list; remove unused lpfc_rdrev_wd30; remove
-	  lpfc_get_brd_no and use Linux provided IDR.
-	* Changed board reset procedure so that lpfc_sli_send_reset()
-	  writes the INITFF bit and leaves lpfc_sli_brdreset() to clear
-	  the bit.
-	* Removed outfcpio sysfs device attribute.
-	* VPD changes: 1) Modify driver to use the model name and
-	  description from the VPD data if it exists 2) Rework use of DUMP
-	  mailbox command to support HBAs with 256 bytes of SLIM.
-	* Fixed compile error for implicit definition of struct
-	  scsi_target
-
-Changes from 20050124 to 20050201
-
-	* Changed version number to 8.0.22
-	* Moved discovery timeout handler to worker thread. There are
-	  function calls in this function which are not safe to call from
-	  HW interrupt context.
-	* Removed free_irq from the error path of HBA initialization.
-	  This will fix the free of uninitialised IRQ when config_port
-	  fails.
-	* Make sure function which processes unsolicited IOCBs on ELS ring
-	  still is called with the lock held.
-	* Clear LA bit from work_ha when we are not supposed to handle LA.
-	* Fix double locking bug in the error handling part of
-	  lpfc_mbx_cmpl_read_la.
-	* Implemented fast IOCB processing for FCP ring.
-	* Since mboxes are now unconditionally allocated outside of the
-	  lock, free them in cases where they are not used.
-	* Moved out a couple of GFP_ATOMICs in lpfc_disc_timeout, to
-	  before locks so that they can GFP_KERNEL instead. Also cleaned
-	  up code.
-	* Collapsed interrupt handling code into one function.
-	* Removed event posting and handling of solicited and unsolicited
-	  iocbs.
-	* Remove ELS ring handling leftovers from the lpfc_sli_inter().
-	* ELS ring (any slow ring) moved from the lpfc_sli_inter() into a
-	  worker thread.  Link Attention, Mbox Attention, and Error
-	  Attention, as well as slow rings' attention is passed to the
-	  worker thread via worker thread copy of Host Attention
-	  register. Corresponding events are removed from the event queue
-	  handling.
-	* Add entries to hba structure to delegate some functionality from
-	  the lpfc_sli_inter() to a worker thread.
-	* Reduced used of GFP_ATOMIC for memory allocations.
-	* Moved locks deeper in order to change GFP_ATOMIC to GFP_KERNEL.
-	* IOCB initialization fix for Raw IO.
-	* Removed qcmdcnt, iodonecnt, errcnt from lpfc_target and from
-	  driver.
-	* Added call to lpfc_els_abort in lpfc_free_node.  Modified
-	  lpfc_els_abort to reset txq and txcmplq iterator after a
-	  iocb_cmpl call.
-	* Fixed a use after free issue in lpfc_init.c.
-	* Defined default mailbox completion routine and removed code in
-	  the sli layer which checks the mbox_cmpl == 0 to free mail box
-	  resources.
-	* In lpfc_workq_post_event, clean up comment formatting and remove
-	  unneeded cast of kmalloc's return.
-	* Removed loop which calls fc_remote_port_unblock and
-	  fc_remote_port_delete for every target as this same effect is
-	  accomplished by the scsi_remove_host call.
-	* Minor cleanup of header files.  Stop header files including
-	  other header files.  Removed sentinels which hide multiple
-	  inclusions.  Removed unneeded #include directives.
-	* Fixed memory leaks in mailbox error paths.
-	* Moved lock from around of lpfc_work_done to lpfc_work_done
-	  itself.
-	* Removed typedef for LPFC_WORK_EVT_t and left just struct
-	  lpfc_work_evt to comply with linux_scsi review coding style.
-	* Fixed some trailing whitespaces, spaces used for indentation and
-	  ill-formatting multiline comments.
-	* Bug fix for Raw IO errors.  Reuse of IOCBs now mandates setting
-	  of ulpPU and fcpi_parm to avoid incorrect read check of Write IO
-	  and incorrect read length.
-
-Changes from 20050110 to 20050124
-
-	* Changed version number to 8.0.21
-	* Removed unpleasant casting in the definition and use of
-	  lpfc_disc_action function pointer array.
-	* Makefile cleanup.  Use ?= operator for setting default
-	  KERNELVERSION and BASEINCLUDE values.  Use $(PWD) consistently.
-	* Removed call to lpfc_sli_intr from lpfc_config_port_post.  All
-	  Linux systems will service hardware interrupts while bringing up
-	  the driver.
-	* Christoph Hellwig change request: Reorg of contents of
-	  lpfc_hbadisc.c, lpfc_scsi.h, lpfc_init.c, lpfc_sli.c,
-	  lpfc_attr.c, lpfc_scsi.c.
-	* Renamed discovery thread to lpfc_worker thread.  Moved handling
-	  of error attention and link attention and mbox event handler to
-	  lpfc_worker thread.
-	* Removed .proc_info and .proc_name from the driver template and
-	  associated code.
-	* Removed check of FC_UNLOADING flag in lpfc_queuecommand to
-	  determine what result to return.
-	* Move modification of FC_UNLOADING flag under host_lock.
-	* Fix IOERR_RCV_BUFFER_WAITING handling for CT and ELS subsystem.
-	* Workaround firmware bug for IOERR_RCV_BUFFER_WAITING on ELS
-	  ring.
-	* Fixed a couple lpfc_post_buffer problems in lpfc_init.c.
-	* Add missing spaces to the parameter descriptions for
-	  lpfc_cr_delay, lpfc_cr_count and lpfc_discovery_threads.
-	* Lock before calling lpfc_sli_hba_down().
-	* Fix leak of "host" in the error path in the remove_one() path.
-	* Fix comment for lpfc_cr_count.  It defaults to 1.
-	* Fix issue where we are calling lpfc_disc_done() recursively from
-	  lpfc_linkdown(), but list_for_each_entry_safe() is not safe for
-	  such use.
-	* Bump lpfc_discovery_threads (count of outstading ELS commands in
-	  discovery) to 32
-	* If the SCSI midlayer tries to recover from an error on a lun
-	  while the corresponding target is in the NPR state, lpfc driver
-	  will reject all the resets. This will cause the target to be
-	  moved to offline state and block all the I/Os. The fix for this
-	  is to delay the lun reset to a target which is not in MAPPED
-	  state until the target is rediscovered or nodev timeout is
-	  fired.
-
-Changes from 20041229 to 20050110
-
-	* Changed version number to 8.0.20
-	* rport fix: use new fc_remote_port_rolechg() function instead of
-	  direct structure change
-	* rport fix: last null pointer check
-	* Phase II of GFP_ATOMIC effort.  Replaced iocb_mem_pool and
-	  scsibuf_mem_pool with kmalloc and linked list.  Inserted list
-	  operations for mempool_alloc calls.  General code cleanup.  All
-	  abort and reset routines converted.  Handle_ring_event
-	  converted.
-	* If the mbox_cmpl == lpfc_sli_wake_mbox_wait in
-	  lpfc_sli_handle_mb_event, pmb->context1 points to a waitq. Do
-	  not free the structure.
-	* rport fixes: fix for rmmod crash
-	* rport fixes: when receiving PRLI's, set node/rport role values
-	* rport fixes: fix for unload and for fabric port deletes
-	* VPD info bug fix.
-	* lpfc_linkdown() should be able to process all outstanding events
-	  by calling lpfc_disc_done() even if it is called from
-	  lpfc_disc_done() Moving all events from phba->dpc_disc to local
-	  local_dpc_disc prevents those events from being processed.
-	  Removing that queue. From now on we should not see "Illegal
-	  State Transition" messages.
-	* Release host lock and enable interrupts when calling
-	  del_timer_sync()
-	* All related to rports: Clean up issues with rport deletion
-	  Convert to using block/unblock on list remove (was del/add)
-	  Moved rport delete to freenode - so rport tracks node.
-	* rport fixes: for fport, get maxframe and class support
-	  information
-	* Added use of wait_event to work with kthread interface.
-	* Ensure that scsi_transport_fc.h is always pulled in by
-	  lpfc_scsiport.c
-	* In remote port changes: no longer nulling target->pnode when
-	  removing from mapped list. Pnode get nulled when the node is
-	  freed (after nodev tmo). This bug was causing i/o received in
-	  the small window while the device was blocked to be errored w/
-	  did_no_connect. With the fix, it returns host_busy
-	  (per the pre-remote port changes).
-	* Merge in support for fc transport remote port use. This removes
-	  any consistent bindings within the driver. All scanning is now
-	  on a per-target basis driven by the discovery engine.
-
-Changes from 20041220 to 20041229
-
-	* Changed version number to 8.0.19
-	* Fixed bug for handling RSCN type 3.  Terminate RSCN mode
-	  properly after ADISC handling completes.
-	* Add list_remove_head macro.  Macro cleans up memory allocation
-	  list handling.  Also clean up lpfc_reset_bus_handler - routine
-	  does not need to allocate its own scsi_cmnd and scsi_device
-	  structures.
-	* Fixed potential discovery bug, nlp list corrutpion fix potential
-	  memory leak
-	* Part 1 of the memory allocation rework request by linux-scsi.
-	  This effort fixes the number of bdes per scsi_buf to 64, makes
-	  the scatter-gather count a module parameter, builds a linked
-	  list of scsi_bufs, and removes all dependencies on lpfc_mem.h.
-	* Reverted lpfc_do_dpc, probe_one, remove_one to original
-	  implementation.  Too many problems (driver not completing
-	  initial discovery, and IO not starting to disks).  Backs out
-	  kthread patch.
-	* Fix race condition in lpfc_do_dpc.  If wake_up interrupt occurs
-	  while lpfc_do_dpc is running disc_done and the dpc list is
-	  empty, the latest insertion is missed and the schedule_timeout
-	  does not wakeup.  The sleep interval is MAX_SCHEDULE_TIMEOUT
-	  defined as ~0UL >> 1, a very large number.  Hacked it to 5*HZ
-	  for now.
-	* Fixed bug introduced when discovery thread implementation was
-	  moved to kthread. kthread_stop() is not able to wake up thread
-	  waiting on a semaphore and "modprobe -r lpfc" is not always
-	  (most of the times) able to complete. Fix is in not using
-	  semaphore for the interruptible sleep.
-	* Small Makefile cleanup - Remove remnants of 2.4 vs. 2.6
-	  determination.
-
-Changes from 20041213 to 20041220
-
-	* Changed version number to 8.0.18
-	* Janitorial cleanup after removal of sliinit and ringinit[] ring
-	  statistic is owned by the ring and SLI stats are in sli
-	  structure.
-	* Integrated patch from Christoph Hellwig <hch@lst.de> Kill
-	  compile warnings on 64 bit platforms: %variables for %llx format
-	  specifiers must be cast to long long because %(u)int64_t can
-	  just be long on 64bit platforms.
-	* Integrated patch from Christoph Hellwig <hch@lst.de> Removes
-	  dead code.
-	* Integrated patch from Christoph Hellwig <hch@lst.de>: use
-	  kthread interface.
-	* Print LPFC_MODULE_DESC banner in module init routine.
-	* Removed sliinit structure and ringinit[] array.
-	* Changed log message number from 324 to 326 in lpfc_sli.c.
-	* Wait longer for commands to complete in lpfc_reset_bus_handler
-	  and lpfc_reset_bus_handler.  Also use schedule_timeout() instead
-	  of msleep() and add error message in lpfc_abort_handler()
-	* When setting lpfc_nodev_tmo, from dev_loss set routine, make 1
-	  sec minimum value.
-	* Functions which assume lock being held were called without lock
-	  and kernel complained about unlocking lock which is not locked.
-	* Added code in linkdown to unreg if we know login session will be
-	  terminated.
-	* Removed automap config parameter and fixed up use_adisc logic to
-	  include FCP2 devices.
-
-Changes from 20041207 to 20041213
-
-	* Changed version number to 8.0.17
-	* Fix sparse warnings by adding __iomem markers to lpfc_compat.h.
-	* Fix some sparse warnings -- 0 used as NULL pointer.
-	* Make sure there's a space between every if and its (.
-	* Fix some overly long lines and make sure hard tabs are used for
-	  indentation.
-	* Remove all trailing whitespace.
-	* Integrate Christoph Hellwig's patch for 8.0.14: if
-	  pci_module_init fails we need to release the transport template.
- 	  (also don't print the driver name at startup, linux drivers can
-	  be loaded without hardware present, and noise in the log for
-	  that case is considered unpolite, better print messages only for
-	  hardware actually found).
-	* Integrate Christoph Hellwig's patch for 8.0.14: Add missing
-	  __iomem annotations, remove broken casts, mark functions static.
-	  Only major changes is changing of some offsets from word-based to
-	  byte-based so we can simply do void pointer arithmetic (gcc
-	  extension) instead of casting to uint32_t.
-	* Integrate Christoph Hellwig's patch for 8.0.14: flag is always
-	  LPFC_SLI_ABORT_IMED, aka 0 - remove dead code.
-	* Modified preprocessor #ifdef, #if, #ifndef to reflect upstream
-	  kernel submission.  Clean build with make clean;make and make
-	  clean;make ADVANCED=1 on SMP x86, 2.6.10-rc2 on RHEL 4 Beta
-	  1. IO with a few lips and a long cable pull behaved accordingly.
-	* Implement full VPD support.
-	* Abort handler will try to wait for abort completion before
-	  returning.  Fixes some panics in iocb completion code path.
-
-Changes from 20041130 to 20041207
-	
-	* Changed version number to 8.0.16
-	* Hung dt session fix.  When the midlayer calls to abort a scsi
-	  command, make sure the driver does not complete post-abort
-	  handler.  Just NULL the iocb_cmpl callback handler and let SLI
-	  take over.
-	* Add Read check that uses SLI option to validate all READ data
-	  actually received.
-
-
-Changes from 20041123 to 20041130
-
-	* Changed version number to 8.0.15
-	* Ifdef'd unused "binary" attributes by DFC_DEBUG for clean
-	  compiles
-	* Stop DID_ERROR from showing up along with QUEUE_FULL set by the
-	  Clarion array (SCSI error ret. val.  0x70028) There is no need
-	  for driver to hard fail command which was failed by the target
-	  device.
-	* Fix for Scsi device scan bug reported on SourceForge.  Driver
-	  was returning a DID_ERROR in lpfc_handle_fcp_error causing
-	  midlayer to mark report luns as failing even though it
-	  succeeded.
-	* Don't ignore SCSI status on underrun conditions for inquiries,
-	  test unit ready's, etc.  This was causing us to lose
-	  reservation conflicts, etc
-
-Changes from 20041018 to 20041123
-	
-	* Changed version number to 8.0.14
-	* Added new function "iterator" lpfc_sli_next_iocb_slot() which
-	  returns pointer to iocb entry at cmdidx if queue is not full.
-	  It also updates next_cmdidx, and local_getidx (but not cmdidx)
-	* lpfc_sli_submit_iocb() copies next_cmdidx into cmdidx. Now it is
-	  the only place were we are updating cmdidx.
-	* lpfc_sli_update_ring() is split in to two --
-	  lpfc_sli_update_ring() and lpfc_sli_update_full_ring().
-	* lpfc_sli_update_ring() don't to read back correct value of
-	  cmdidx.
-	* Simplified lpfc_sli_resume_iocb() and its use.
-	* New static function lpfc_sli_next_iocb(phba, pring, &piocb) to
-	  iterate through commands in the TX queue and new command (at the
-	  end).
-	* Reduced max_lun to 256 (due to issues reported to some arrays).
-	  Fixed comment, and macro values so def=256, min=1, max=32768.
-	* Fix an obvious typo/bug: kfree was used to free lpfc_scsi_buf
-	  instead of mempool_free in lpfc_scsiport.c.
-	* Suppress nodev_tmo message for FABRIC nodes.
-	* Fixed some usage of plain integer as NULL pointer.
-	* Bug fix for FLOGI cmpl, lpfc_els_chk_latt error path code
-	  cleanup.
-	* Fixup lpfc_els_chk_latt() to have Fabric NPorts go thru
-	  discovery state machine as well.
-	* Fixes to lpfc_els_chk_latt().
-	* Use DID not SCSI target id as a port_id and add some missing
-	  locks in lpfc_fcp.c.
-	* Changed eh_abort_handler to return FAILED if command is not
-	  found in driver.
-	* Fix crash: paging request at virtual address 0000000000100108 -
-	  a result of removing from the txcmpl list item which was already
-	  removed (100100 is a LIST_POISON1 value from the next pointer
-	  and 8 is an offset of the "prev") Driver runs out of iotags and
-	  does not handle that case well. The root of the problem is in the
-	  initialization code in lpfc_sli.c
-	* Changes to work with proposed linux kernel patch to support
-	  hotplug.
-	* Zero out seg_cnt in prep_io failure path to prevent double sg
-	  unmap calls.
-	* Fix setting of upper 32 bits for Host Group Ring Pointers if in
-	  SLIM. Old code was inappropriately masking off low order bits.
-	* Use scsi_[activate|deactivate]_tcq calls provided in scsi_tcq.h.
-	* Integrated patch from Christoph Hellwig (hch@lst.de): don't call
-	  pci_dma_sync_* on coherent memory. pci_dma_sync_* is need and
-	  must be used only with streaming dma mappings pci_map_*, not
-	  coherent mappings.  Note: There are more consistent mappings
-	  that are using pci_dma_sync calls. Probably these should be
-	  removed as well.
-	* Modified lpfc_free_scsi_buf to accommodate all three scsi_buf
-	  free types to alleviate miscellaneous panics with cable pull
-	  testing.
-	* Set hotplug to default 0 and lpfc_target_remove to not remove
-	  devices unless hotplug is enabled.
-	* Fixed discovery bug: plogi cmpl uses ndlp after its freed.
-	* Fixed discovery bug: rnid acc cmpl, can potentially use ndlp
-	  after its freed.
-	* Modularize code path in lpfc_target_remove().
-	* Changes to support SCSI hotplug (ifdef'ed out because they need
-	  kernel support USE_SCAN_TARGET requires kernel support to export
-	  the interface to scsi_scan_target and to move the SCAN_WILD_CARD
-	  define to a general scsi header file.  USE_RESCAN_HOST requires
-	  kernel support to export an interface to scan_scsi_host() with
-	  the rescan flag turned on).
-	* Removed redundant variable declaration of lpfc_linkdown_tmo.
-	* Fix for large port count remove test.
-	* Added check to see if BAR1 register is valid before using BAR1
-	  register for programming config_port mail box command.
-	* Added lpfc_scsi_hotplug to enable/disable driver support of SCSI
-	  hotplug.
-	* Changed lpfc_disc_neverdev() to lpfc_disc_illegal() and changed
-	  lpfc_disc_nodev() to lpfc_disc_noop().  Adjusted appropriate
-	  events to use these routines.
-	* Add support for SCSI device hotplug.
-	* Take dummy lpfc_target's into account for lpfc_slave_destroy().
-	* Bug fix to store WWPN / WWNN in NameServer / FDMI lpfc_nodelist
-	  entries.
-	* Added slavecnt in lpfc_target for diagnostic purposes.
-	* Added lpfc_hba load/unload flags to take care of special cases
-	  for add/remove device.
-	* Have target add/remove delay before scanning.
-	* Have rmmod path cleanup blocked devices before scsi_remove_host.
-	* Added a #define for msleep for 2.6.5 kernels.
-	* In reset bus handler if memory allocation fails, return FAILED
-	  and not SUCCESS.
-	* Have lpfc eh handlers, bus_reset and lun_reset, wait for all
-	  associated I/Os to complete before returning.
-	* Fix memset byte count in lpfc_hba_init so that
-	  LP1050 would initialize correctly.
-	* Background nodev_timeout processing to DPC. This enables us to
-	  unblock (stop dev_loss_tmo) when appropriate.
-	* Fix array discovery with multiple luns.  The max_luns was 0 at
-	  the time the host structure was initialized.  lpfc_cfg_params
-	  then set the max_luns to the correct value afterwards.
-	* Remove unused define LPFC_MAX_LUN and set the default value of
-	  lpfc_max_lun parameter to 512.
-	* Reduced stack usage of lpfc_hba_init.
-	* Cleaned up the following warning generated by
-	  scripts/checkincludes.pl lpfc_fcp.c: scsi/scsi_cmnd.h is
-	  included more than once.
-	* Replaced "set_current_state(TASK_UNINTERRUPTIBLE);
-	  schedule_timeout(timeout)" with "msleep(timeout)".
-	* Fixnode was losing starget when rediscovered. We saw messages
-	  like: lpfc 0000:04:02.0: 0:0263 Cannot block scsi target as a
-	  result.  Moved starget field into struct lpfc_target which is
-	  referenced from the node.
-	* Add additional SLI layer logging in lpfc_sli.c.
-	* Ignore more unexpected completions in lpfc_nportdisc.c.
-	* Can not call lpfc_target_unblock from the soft interrupt
-	  context.  It seems to be not nessasery to unblock target from
-	  nodev timeout.
-	* Introduce and use less lethal event handler for unexpected
-	  events in lpfc_nportdisc.c.
-	* Can not call fc_target_(un)block() functions with interrupts
-	  disabled in lpfc_scsiport.c.
-	* Added new configuration parameter, lpfc_max_luns range 1-32768,
-	  default 32768.
-	* Allow lpfc_fcp.c to call lpfc_get_hba_sym_node_name().
-	* Increase nodev timeout from 20 seconds to 30 seconds.
-	* Replace some kfree((void*)ptr) with kfree(ptr).
-	* Make 3 functions static: lpfc_get_hba_sym_node_name,
-	  lpfc_intr_prep and lpfc_setup_slim_access.  Move lpfc_intr_prep
-	  and lpfc_setup_slim_access so they're defined before being used.
-	* Remove an unnecessary list_del() in lpfc_hbadisc.c.
-	* Set nlp_state before calling lpfc_nlp_list() since this will
-	  potentially call fc_target_unblock which may cause a race in
-	  queuecommand by releasing host_lock.
-	* Since lpfc_nodev_tmo < dev_loss_tmo remove queuecommand
-	  DID_BAD_TARGET return for now.
-	* Fix a problem with rcv logo.
-	* Remove unused portstatistics_t structure.
-	* Remove #if 0 and unnecessary checks in lpfc_fcp.c.
-	* Simplify lpfc_issue_lip: Extra layer of protection removed.
-	* Grab lock before calling lpfc_sli_issue_mbox(phba, pmb,
-	  MBX_NOWAIT) in lpfc_sli_issue_mbox_wait().
-
-Changes from 20040920 to 20041018
-
-	* Changed version number to 8.0.13
-	* Hide some attributes using #ifndef DFC_DEBUG ... #endif.
-	* Modify Makefile to (1) make BUILD_NO_DEBUG=1 will hide some
-	  (binary) attributes (2) make BUILD_FC_TRANS=0 will build driver
-	  for 2.6.5 kernel with block/unblock patch.
-	* Modified #ifdef names.
-	* Added support for proposed FC transport host attributes (which
-	  replaces some of the attributes we had local to the driver).
-	  Removed the binary statistics sysfs attribute.
-	* Added extra ELS verbose logging for ELS responses.
-	* Added recognition for BUILD_FC_TRANS=2 to Makefile to define
-	  FC_TRANS_VER2.
-	* Add a pointer for link stats allocation.
-	* Exported lpfc_get_hba_sym_node_name for use by FC_TRANS_VER2
-	  sysfs routines.
-	* Fix discovery problem in lip testing: if device sends an ELS cmd
-	  (i.e. LOGO) before our FLOGI completes it should be LS_RJT'ed.
-	* Moved #defines around to provide target_add/remove for upstream
-	  kernel deliverables only not SLES9.  Provided ifdefs to #include
-	  target_block/unblock only if FC_TRANS_VER1.
-	* Add sanity check in lpfc_nlp_list move setting nlp_Target
-	  outside #ifdef.
-	* Added a blocked member to the lpfc_target structure for
-	  block/unblock.  This member allows the driver to know when to
-	  unblock for pci_remove_one or pci_add_one.  #ifdef'd some more
-	  block/unblock stuff and removed some defensive checks from
-	  target_block/unblock.
-	* Moved + 5 second window to dev_loss_tmo setting and updated
-	  comments.
-	* Removed NULL target check from target_block/unblock and fixed up
-	  a few comments.
-	* Enable sysfs attributes on 2.6.5 kernels and remove extra
-	  compatibility code.
-	* Remove any and all trailing whitespace.
-	* Added message 0718 and return error when dma_map_single fails.
-	* Changed the fcpCntl2 commands to include an FCP_ prefix to get
-	  rid of build warnings on later 2.6.9-rc kernels.  Build
-	  conflicts with scsi/scsi.h.  Remove inclusions of scsi/scsi.h
-	  from hbadisc.c, sli.c, and fcp.c since these modules had no
-	  dependencies on scsi.h.
-	* Fixed a bug with RSCN handling. A RSCN received on one device,
-	  shouldn't affect other devices not referenced by the RSCN.
-	* Moved #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,6) to include
-	  lpfc_jedec_to_ascii to prevent warning in SLES 9.
-	* Update Makefile to account for SLES 9 and scsi-target upstream
-	  kernel.
-	* This checkin provides block/unblock hooks for the upstream scsi
-	  target kernel and 2.6.5 on SLES9 SP1 with the block/unblock
-	  patch.
-	* Discovery changes regarding setting targetp->pnode and
-	  ndlp->nlp_Target Ensure fc_target_* routines are called properly
-	  from discovery.  Remove list_del's from lpfc_cleanup().  Ensure
-	  all the lpfc_consistent_bind_* routines don't set any driver
-	  structure objects.
-	* Fix for timeout of READ_LA or READ_SPARAM mailbox command
-	  causing panic.
-	* Cleanup list_del()'s for Discovery ndlp lists.
-	* Bug fixes for some insmod/rmmod crashes, link down crashes and
-	  device loss crashes.
-	* Removed NLP_SEARCH_DEQUE.
-	* Call lpfc_target_unblock only if the targetp is nonNull and with
-	  the host_lock held.
-	* Added qcmdcnt back along with misc bug fixes to discovery.
-	* Changed tgt_io to outfcpio lpfc_fcp.c.
-	* Fixed errors caused by LIP and cable pulls both with and without
-	  block/unblock patch.
-	* For now we have to call fc_target_unblock and fc_target_block
-	  with interrupts enabled.
-	* Save seg_cnt from dma_map_sg.  Save scatter-gather start address
-	  and pass back to dma_unmap_sg in error with seg_cnt.
-	* Incorporating block/unblock calls into driver with ifdefs.  This
-	  change is supported by scsi-target-2.6 kernel and forward only.
-	* Merged in some discovery bug fixes and added tgt io counters.
-	* Added sysfs attributes/interfaces: read only attribute
-	  "management_version" and write only attribute "issue_lip".
-	* Fix build on big endian machines: while #if was OK with
-	  __BIG_ENDIAN which defined as 4321, __BIG_ENDIAN_BITFIELD has to
-	  be tested with #ifdef because it does not have any value, it is
-	  either defined or not.
-	* Add fabric_name and port_type attributes.
-	* Change mdelay to msleep.  mdelay works, but wastefully uses cpu
-	  resources without a lock held. Revert to msleep.  Tested with
-	  sg_reset for bus and three attached targets.
-	* Added the customary #ifndef...#define...#endif to
-	  lpfc_version.h.
-	* Integrate patches from Christoph Hellwig: two new helpers common
-	  to lpfc_sli_resume_iocb and lpfc_sli_issue_iocb - singificant
-	  cleanup of those two functions - the unused SLI_IOCB_USE_TXQ is
-	  gone - lpfc_sli_issue_iocb_wait loses its flags argument
-	  totally.
-	* Fix in lpfc_sli.c: we can not store a 5 bit value in a 4-bit
-	  field.
-	* Moved some routines out of lpfc_fcp.c into more appropriate
-	  files.
-	* Whitespace cleanup: remove all trailing whitespace.
-	* Make lpfc_disc_ndlp_show static to lpfc_fcp.c.
-	* Remove leftover printk and replace some with
-	  printk(KERN_WARNING)
-	* Trivial: fix a few long lines and a soft tab.
-	* Remove warnings generated by Sparse against driver (make
-	  C=1). Mostly these are "using integer as pointer warnings"
-	  i.e. use NULL instead of 0.
-	* Integrated patch from Christoph Hellwig: Quite a lot of changes
-	  here, the most notable is that the phba->slim2p lpfc_dmabuf goes
-	  away in favour of a typede pointer and a dma_addr_t.  Due to the
-	  typed pointer lots of the cast mess can go away, and while at it
-	  I also replaced the messy SLI2_SLIM_t with a simple struct
-	  lpfc2_sli2_slim that only contains the part of the union we care
-	  about while using SLI2_SLIM_SIZE for all size calculations
-	  directly.
-	* Integrated patch from Christoph Hellwig: This streamlines the
-	  I/O completion path a little more, especially taking care of
-	  fast-pathing the non-error case.  Also removes tons of dead
-	  members and defines from lpfc_scsi.h - e.g. lpfc_target is down
-	  to nothing more than the lpfc_nodelist pointer.
-	* Added binary sysfs file to issue mbox commands
-	* Replaced #if __BIG_ENDIAN with #if __BIG_ENDIAN_BITFIELD for
-	  compatibility with the user space applications.
-	* Decrease the amount of data in proc_info.
-	* Condense nodelist flag members.
-	* Expand INFO for discovery sysfs shost entries.
-	* Notify user if information exceeds 4k sysfs limit.
-	* Removed a bunch of unused #defines.
-	* Added initial sysfs discovery shost attributes.
-	* Remove unused #defines lpfc_disc.h.
-	* Fixed failMask nodelist settings.
-	* Cleanup some old comments / unused variables.
-	* Add LP101 to list of recognized adapters.
-
-Changes from 20040908 to 20040920
-
-	* Changed version number to 8.0.12
-	* Removed used #defines: DEFAULT_PCI_LATENCY_CLOCKS and
-	  PCI_LATENCY_VALUE from lpfc_hw.h.
-	* Changes to accommodate rnid.
-	* Fix RSCN handling so RSCN NS queries only effect NPorts found in
-	  RSCN data.
-	* If we rcv a plogi on a NPort queued up for discovery, clear the
-	  NLP_NPR_2B_DISC bit since rcv plogi logic will force NPort thru
-	  discovery.
-	* Ensure lpfc_target is also cleaned up in lpfc_cleanup().
-	* Preliminary changes for block/unblock kernel API extensions in
-	  progress with linux-scsi list.  These are name changes and
-	  prototype changes only.
-	* Added send_abts flag to lpfc_els_abort. For rcv LOGO when ADISC
-	  sent, the XRI of the LOGO rcv'ed is the same as the ADISC
-	  sent. Thus we cannot ABTS the ADISC before sending the LOGO ACC.
-	* Weed out some unused fc_flags.  Add FC_DISC_TMO.
-	* board_online sysfs attribute added to support libdfc functions
-	  InitDiagEnv and SetBrdEnv.
-	* Streamline code in lpfc_els_retry fixup abort case in
-	  lpfc_els_timeout_handler().
-	* Flush discovery/ELS events when we bring SLI layer down.
-	* ctlreg and slimem binary attributes added to support libdfc
-	  read/write mem/ctl functions.
-	* Integrated Christoph Hellwig's patch: Cleanup
-	  lpfc_sli_ringpostbuf_get.
-	* Modified lpfc_slave_alloc and lpfc_slave_destroy to allocate and
-	  free a dummy target pointer.  This allows queuecommand to skip
-	  the NULL target pointer check and avoid the console spam when
-	  slave_alloc fails.
-	* Fix cfg_scan_down logic, it was reversed.
-	* Init list head ctrspbuflist.
-	* Change name of lpfc_driver_abort to lpfc_els_abort since it is
-	  only valid for ELS ring.
-	* Remove unused third argument for lpfc_consistent_bind_get().
-	* Fix up iotag fields in lpfc_prep_els_iocb().
-	* Remove log message on code path triggered by lpfc_els_abort().
-	* Set host->unique_id in lpfc_fcp.c.
-	* Removed deadwood: lpfc_target.pHba not necessary anymore.
-	* Integrated patch from Christoph Hellwig: remove dead
-	  SLI_IOCB_POLL handling.
-	* Integrated patch from Christoph Hellwig: Streamline I/O
-	  submission and completion path a little.
-	* Remove unnecessary lpfc_brd_no.  Ensure brd_no assignment is
-	  unique.
-	* Removed unused MAX_FCP_LUN.
-	* Use mod_timer instead of add_timer for fdmi in lpfc_ct.c.
-	* Fixed misc discovery problems.
-	* Move stopping timers till just before lpfc_mem_free() call.
-	* Fix up NameServer reglogin error path.
-	* Cleanup possible outstanding discovery timers on rmmod.
-	* Fix discovery NPort to NPort pt2pt problem.
-	* Get rid of ip_tmofunc / scsi_tmofunc.
-	* Integrated patch from Christoph Hellwig:
-	  lpfc_disc_done/lpfc_do_dpc cleanup - lpfc_disc_done can return
-	  void - move lpfc_do_dpc and lpfc_disc_done to lpfc_hbadisc.c -
-	  remove checking of list emptiness before calling lpfc_disc_done,
-	  it handles the empty list case just fine and the additional
-	  instructions cost less then the bustlocked spinlock operations.
-	* Integrated patch from Christoph Hellwig: This adds a new 64bit
-	  counter instead, brd_no isn't reused anymore.  Also some tiny
-	  whitespace cleanups in surrounding code.
-	* Reorder functions in lpfc_els.c to remove need for prototypes.
-	* Removed unused prototypes from lpfc_crtn.h -
-	  lpfc_ip_timeout_handler, lpfc_read_pci and lpfc_revoke.
-	* Removed some unused prototypes from lpfc_crtn.h -
-	  lpfc_scsi_hba_reset, lpfc_scsi_issue_inqsn,
-	  lpfc_scsi_issue_inqp0, lpfc_scsi_timeout_handler.
-	* Integrated patch from Christoph Hellwig: remove TRUE/FALSE
-	  usage.
-	* Integrated patch from Christoph Hellwig: Remove unused function
-	  prototypes lpfc_set_pkt_len and lpfc_get_pkt_data from
-	  lpfc_crtn.h - fixes build warnings.
-	* Removed unused struct lpfc_dmabufip definition from lpfc_mem.h.
-	* Removed pre-2.6.5 MODULE_VERSION macro from lpfc_compat.h.
-	* Fixing missing static and removing dead code.
-	* Adding nodewwn, portwwn and portfcid shost attributes.
-	* Initial support for CT via sysfs. request payloads of size less
-	  than PAGE_SIZE and rsp payloads of size PAGE_SIZE are supported.
-	  Driver maintains a list of rsp's and passes back rsp's
-	  corresponding to the pid of the calling process.
-	* Support for RefreshInformation, GetAdapterAttributes,
-	  GetPortStatistics.
-	* Make nodev-tmo default to 20 seconds.
-	* Fix up some DSM error cases, unreg_login rpi where needed.
-	* Fix up comments for fc_target_block / fc_target_unblock.
-	* Fix up code for scsi_block_requests / scsi_unblock_requests.
-	* Add NLP_FCP_TARGET for nodeinfo support.
-	* Move suspend/resume in lpfc_nlp_list under appropriate case -
-	  Used host_lock for DPC to avoid race (remove dpc_lock)
-	* Fix some corner cases for PLOGI receive - simplify error case
-	  for cmpl_reglogin_reglogin_issue.
-	* Bug fix for ppc64 EEH MMIO panic - always do readl after
-	  writel's of HBA registers to force flush.
-	* Get rid of initial static routine declarations in lpfc_hbadisc.c
-	  and lpfc_els.c.
-	* Updates to discovery processing.
-
-Changes from 20040823 to 20040908
-
-	* Changed version number to 8.0.11
-	* Removed persistent binding code.
-	* Display both ASC and ASCQ info.
-	* Fixed link down->up transitions when linkdown tmo expires. Fix
-	  was in the defensive error checking at the start of
-	  queuecommand.
-	* Removed lpfc_scsi_timeout_handler as this timer is no longer
-	  required.  The midlayer will exhaust retries and then call
-	  lpfc_abort_handler, lpfc_reset_lun_handler, and
-	  lpfc_reset_target_handler.
-	* Minimal support for SCSI flat space addressing/volume set
-	  addressing.  Use 16 bits of LUN address so that flat
-	  addressing/VSA will work.
-	* Changed 2 occurrences of if( 1 != f(x)) to if(f(x) != 1)
-	* Drop include of lpfc_cfgparm.h.
-	* Reduce stack usage of lpfc_fdmi_cmd in lpfc_ct.c.
-	* Add minimum range checking property to /sys write/store
-	  functions.
-	* Fix display of node_name and port_name via fc transport
-	  attr.
-	* Removed biosparam code.
-	* Removed range checking. phba->config[] array elements are now
-	  embedded into the hba struct. lpfc_config_setup() has been
-	  removed.
-	* Collapsed lpfc_scsi_cmd_start into lpfc_queuecommand and cleaned
-	  up combined routines.
-	* Removed unused prototypes myprint and
-	  lpfc_sched_service_high_priority_queue.
-	* Removed unused function lpfc_nodev.
-	* Removed scsi_cmnd->timeout_per_command cancelation. SCSI midlayer
-	  now times out all commands - FW is instructed to not timeout.
-	* Removed polling code from lpfc_scsi_cmd_start. Reorganized
-	  queuecommand and cmd_start some.
-
-Changes from 20040810 to 20040823
-
-	* Changed version number to 8.0.10
-	* Additional timer changes as per Arjan / Christoph's comments.
-	* Used mod_timer() instead of del_timer_sync() where appropriate.
-	* Fixed a use after free case (panic on 2.6.8.1 with
-	  CONFIG_DEBUG_SLAB set).
-	* Fix compile warning in lpfc_fcp.c.
-	* Minor fix for log message, that prints unassigned brdno which is
-	  zero.
-	* Move scsi_host_alloc() to the beginning of probe_one(). This
-	  ensures that host_lock is available at later stages and also
-	  avoids tons of unnecessary initializing if host_alloc()
-	  fails.
-	* Removed else clause from lpfc_slave_configure that set
-	  sdev->queue_depth.  The driver informs the midlayer of its
-	  setting in the template and only overrides if queue tagging is
-	  enabled.
-	* Added PCI_DEVICE_ID_ZEPHYR and PCI_DEVICE_ID_ZFLY (Junior
-	  Zephyr) support
-
-Changes from 20040730 to 20040810
-	
-	* Changed version number to 8.0.9
-	* Removed per HBA driver lock.  Driver now uses the host->host_lock
-	* Restored support for the 2.6.5 kernel for those linux distributions
-	  shipped with the 2.6.5 kernel.
-	* Applied patch from Christoph Hellwig (hch@infradead.org) as follows
-	  "[PATCH] use scsi host private data in ->proc_info.  
-	* Applied patch from Christoph Hellwig (hch@infradead.org) as follows
-	  "Re: [Emulex] Ready for next round.  This patch cleans up the memory 
-	  allocation routines a little and fixes a missing mempool_destroy and
-	  some missing error handling."
-	* Changed pointers assignments from 0 to NULL.
-	* Added fixes to the lpfc_reset_lun_handler and lpfc_reset_bus_handler
-	  entry points that caused kernel to Oops or hang.
-	* Added fixes to targetless hosts that caused modprobe and insmod to hang.
-	* Ongoing cleanup to many files
-	  
-Changes from 20040723 to 20040730
-
-	* Changed version number to 8.0.8
-	* Removed unused LPFN_DRIVER_VERSION #define.
-	* Folded lpfc_findnode_scsiid into lpfc_find_target, its only
-	  caller.
-	* Removed 2 unneeded arguments to lpfc_find_target (lun and
-	  create_flag).
-	* Make lpfc_sli_reset_on_init = 1
-	* Minor cleanup to quieten sparse.
-	* Removed missing function = 0 in tmo routine in lpfc_els.c.
-	* Moved additional binding parameters into lpfc_defaults.c:
-	  lpfc_automap / lpfc_fcp_bind_method
-	* Use msecs_to_jiffies() where applicable.
-	* Only use queue depth attribute only after SLI HBA setup was
-	  completed.
-	* Put in memory barriers for PPC
-	* Added PCI_DEVICE_ID_HELIOS and PCI_DEVICE_ID_JFLY (Junior
-	  Helios) support
-	* Added 4&10 gigabit choices in user option link_speed
-	* Updated timer logic: Set timer data after init_timer use
-	  timer_pending() instead of expires.
-	* Removed some remnants of IP over FC support from Kconfig and
-	  Makefile.
-	* Remove redundant prototypes for lpfc_handle_eratt,
-	  lpfc_handle_latt and lpfc_read_pci.
-	* Ongoing cleanup of lpfc_init.c.
-	* Changed LPFC_CFG_DFT_HBA_Q_DEPTH -> LPFC_CFG_HBA_Q_DEPTH.
-	* Another cleanup stab at lpfc_ct.c. Remove castings, structure
-	  code sanely, remove redundant code, reorganize code so that
-	  functions are invoked after definition.
-
-Changes from 20040716 to 20040723
-
-	* Changed version number to 8.0.7
-	* Cleanup of lpfc_ct.c. Removed number of casts, removed tons of
-	  dead/redundant code, cleaned up badly and poorly written code,
-	  cleaned up return values.
-	* Fixed Persistent binding implementation
-	* Removed all references to lpfc_scsi_req_tmo
-	* Removed last references to lun_skip config parameter.
-	* Removed LPFC_DEV_RPTLUN node failure bit because we don't issue
-	  REPORT_LUNS from the driver anymore.
-	* Removed LUN-tracking in driver.  Removed lpfc_lun struct and
-	  moved any functionality we still need to lpfc_target.
-	* Added new lpfc_jedec_to_ascii() call and replace two instances
-	  of duplicate code with calls to this function.
-	* Removed Volume Set Addressing handling on LUN IDs.
-	* Applied patch from Christoph Hellwig (hch@infradead.org) that
-	  removes dead code belonging to lpfc_build_scsi_cmnd() and its
-	  call path. This is related to the recently removed report_lun
-	  code.
-
-Changes from 20040709 to 20040716
-
-	* Changed version number to 8.0.6
-	* Removed internal report LUNs usage.  Removed functions:
-	  lpfc_disc_issue_rptlun, lpfc_disc_cmpl_rptlun,
-	  lpfc_disc_retry_rptlun and their use.
-	* Removed usused scheduler prototypes in lpfc_crtn.h
-	* Replace lpfc_geportname() with generic memcmp().
-	* Rearrange code in lpfc_rcv_plogi_plogi_issue() to make it a
-	  little more readable.
-	* Remove redundant port_cmp != 2 check in if
-	  (!port_cmp) { .... if (port_cmp != 2).... }
-	* Clock changes: removed struct clk_data and timerList.
-	* Clock changes: separate nodev_tmo and els_retry_delay into 2
-	  separate timers and convert to 1 argument changed
-	  LPFC_NODE_FARP_PEND_t to struct lpfc_node_farp_pend convert
-	  ipfarp_tmo to 1 argument convert target struct tmofunc and
-	  rtplunfunc to 1 argument * cr_count, cr_delay and
-	  discovery_threads are only needed to be module_params and not
-	  visible via sysfs.
-
-Changes from 20040614 to 20040709
-
-	* Changed version number to 8.0.5
-	* Make lpfc_info static.
-	* Make lpfc_get_scsi_buf static.
-	* Print a warning if pci_set_mwi returns an error.
-	* Changed SERV_PARM to struct serv_parm.
-	* Changed LS_RJT to struct ls_rjt.
-	* Changed CSP to struct csp.
-	* Changed CLASS_PARMS to struct class_parms.
-	* Some cosmetic coding style cleanups to lpfc_fcp.c.
-	* Providing a sysfs interface that dumps the last 32
-	  LINK_[UP|DOWN] and RSCN events.
-	* Get rid of delay_iodone timer.
-	* Remove qfull timers and qfull logic.
-	* Convert mbox_tmo, nlp_xri_tmo to 1 argument clock handler
-	* Removed duplicate extern defs of the bind variables.
-	* Streamline usage of the defines CLASS2 and CLASS3, removing
-	  un-necessary checks on config[LPFC_CFG_FCP_CLASS].
-	* Moving the persistent binding variables to new file
-	  lpfc_defaults.c
-	* Changed LPFC_SCSI_BUF_t to struct lpfc_scsi_buf.
-	* Moved config specific code from probe_one() into
-	  config_setup(). Removing a redundant check on scandown value
-	  from bind_setup() as this is already done in config_setup().
-	* Changed LPFC_SLI_t to struct lpfc_sli.
-	* Changed FCP_CMND to struct fcp_cmnd.
-	* Changed FCP_RSP to struct fcp_rsp.
-	* Remove the need for buf_tmo.
-	* Changed ULP_BDE64 to struct ulp_bde64.
-	* Changed ULP_BDE to struct ulp_bde.
-	* Cleanup lpfc_os_return_scsi_cmd() and its call path.
-	* Removed lpfc_no_device_delay.
-	* Consolidating lpfc_hba_put_event() into lpfc_put_event().
-	* Removed following attributes and their functionality:
-	  lpfc_extra_io_tmo, lpfc_nodev_holdio, lpfc_delay_rsp_err,
-	  lpfc_tgt_queue_depth and lpfc_check_cond_err.
-	* Clock changes consolidating timers, just in the struct lpfc_hba,
-	  to get rid of clkData and pass only one argument to timeout
-	  routine. Also, removing need for outstanding clock linked list
-	  to stop these timers at rmmod.
-	* Move lpfc.conf contents into lpfc_fcp.c. Removing per adapter
-	  attributes in favor of global attributes.
-	* Fix a potential null pointer reference of pmbuf in lpfc_ct.c.
-	* On reset_lun, issue LUN_RESET as opposed to ABORT_TASK_SET.
-	* Removed SCSI_REQ_TMO related code.
-	* Introducing two new defines LPFC_ATTR_R and LPFC_ATTR_RW that do
-	  a module_param, MODULE_PARM_DESC, lpfc_param_show,
-	  [lpfc_param_store] and CLASS_DEVICE_ATTRIBUTE.
-	* Properly clean up when allocation of a linked BDE fails in the
-	  SCSI queuecommand path.
-	* Fail SCSI command if dma_map_sg call fails.
-	* Remove unused macros SWAP_ALWAYS and SWAP_ALWAYS16.
-	* Reset context2 to 0 on exit in
-	  lpfc_sli_issue_iocb_wait_high_priority() and
-	  lpfc_sli_issue_iocb_wait().
-	* Arranging lpfc_scsiport.c to follow style of use after
-	  definition. This removes the need for the cruft of forward
-	  declarations. Also removing a redundant #define ScsiResult as it
-	  already available elsewhere.
-	* Applying "Streamline lpfc error handling" patch from Christoph
-	  Hellwig (hch@infradead.org) with following modifications: fix
-	  mem leaks, remove some misplaced code that need not be there,
-	  print a message on exit (old code prints two (entry/exit)), make
-	  ret values consistent (either 1/0 or SUCCESS/FAILURE), keep all
-	  eh routines in a single file (lpfc_scsiport.c).
-	* Move contents of lpfc_module_param.h into lpfc_fcp.c.
-	* Changed sysfs attributes to CLASS_DEVICE_ATTRIBUTES (previously
-	  DEVICE_ATTRIBUTES). They now appear in
-	  /sys/class/scsi_host/hostx (previously in
-	  /sys/bus/pci/drivers/lpfc/devx).
-	* Removed lpfc_syfs.h and lpfc_sysfs.c.
-	* Cleanup of config params.  Throttle params have been removed.
-	  max_lun has been removed. max_target is replaced with a #define,
-	  lun_skip is removed.  Remove ipfc config params and related
-	  code.
-	* Changed DMABUF_t usage to struct lpfc_dmabuf.
-	* Downsizing iCfgParam structure to include a_string, a_low, a_hi
-	  and a_default values only.
-	* Free SCSI buf safety memory pool on shutdown to eliminate memory
-	  leak.
-	* Change lpfc_printf_log to a #define. Also include phba->brd_no
-	  and newline in the print string rather than in the #define.
-	* Remove code that optionally locates Host Group Pointers in host
-	  memory SLIM since this is no longer needed for PPC64, once
-	  CONFIG_PORT uses HBA's view of its BAR0.
-	* Removed the forward declarations of the sli functions and
-	  rearranging the code in lpfc_sli.c.
-	* Removed the preamble functionality from logging.
-	* Make lpfc_sli_hba_setup() return negative error codes on error
-	  and correct the comment left over in lpfc_fcp.c
-	* Removed the lpfc_loadtime variable.
-	* Put a space between all ifs and their open parens '('.
-	* Change Studly_Caps LPFC_SCSI_BUF_t to struct lpfc_scsi_buf.
-	* Fixed insmod hang after hardware error.
-	* Relocated scsi_host alloc to before we enable the interrupt
-	  handler
-	* Add .tmp_versions directory to Makefile clean target.  This
-	  directory is created in the 2.6.5+ build process (with Red Hat
-	  kernels at least).
-	* Changing phba->config to kmalloc lpfc_icfgparam and not
-	  *phba->config. This is manifesting itself as a panic in
-	  pci_release_region().
-	* Fix for firmware download / board reset problem.
-	* Integrated patch from Christoph Hellwig (hch@infradead.org) to
-	  reorganize and cleanup lpfc_fcp.c
-	* Don't abort commands immediately when there is an RSCN event to
-	  give driver time to rediscover targets before the midlayer
-	  retries the SCSI commands.
-
-Changes from 20040604 to 20040614
-
-	* Changed version number to 8.0.4
-	* Removed lpfc_valid_lun function.
-	* Added scsi_buf safety pool to address scsi_buf failures in
-	  queuecommand under low memory conditions.  Allocations now come
-	  from kmalloc initially, but if kmalloc fails, the allocation
-	  comes from the safety pool.
-	* Modified lpfc_slave_alloc to only set the scsi_device->hostdata
-	  pointer if the driver has discovered the target.  This routine
-	  always returns success now as well since no error ever occurs in
-	  the alloc routine.
-	* Mask only info and warning messages.  Print all error messages
-	  irrespective of mask.
-	* Removing lpfc_log_chk_msg_disabled()
-	* Changed lpfc_printf_log to take struct lpfc_hba * directly
-	  instead of a "board number".
-	* Convert dma_sync_single to pci_dma_sync_single_for_{device/cpu}.
-	* Implemented new style log messages. The message strings are now
-	  embedded in the call to lpfc_printf_log.
-	* Decreased FLOGI discovery timeout to 20 seconds.
-	* On error in lpfc_pci_probe_one() return -1 and not 1.
-	* Allow for board numbers that are not sequential, paving the way
-	  for hotplug support.
-	* scsi_add_host() can fail, so wrap it around in an if(). Also
-	  initiate scsi_scan_host() after attaching the sysfs attributes.
-	* lpfc_release_version is used only in lpfc_ct.c, so move it there
-	  and mark it as static.
-	* Removed lpfc_sleep_ms and replaced with mdelay or schedule calls
-	  directly
-	* Removed all (struct list_head *) casts from clkData-related list
-	  handling in list_add, list_del macros.
-	* Removed EXPORT_SYMBOLs.
-	* Removed LPFC_MIN_QFULL and lpfc_qthrottle_up.
-	* Replace LPFCSCSITARGET_t with struct lpfc_target.
-	* Replace LPFCSCSILUN_t with struct lpfc_lun.
-	* Remove unused struct declarations (fcPathId and fcRouteId) from
-	  lpfc_scsi.h.
-	* Rewrite use of FC transport attributes.
-	* Fix crash when link is lost.  This was due to lpfc_delay_iodone
-	  calling list_del on an object that was never put on a list.
-	* Remove trailing spaces at the end of all lines.
-	* Set MAX_FCP_TARGET to 256 from 0xff.  Set MAX_FCP_LUN and
-	  MAX_FCP_CMDS to their decimal equivalents and updated
-	  documentation.
-
-Changes from 20040526 to 20040604
-
-	* Changed version number to 8.0.3
-	* Completed sysfs FC transport support.
-	* Removed unused fields in SCSI LUN and SCSI Target structures:
-	  void *pTargetProto; void *pTargetOSEnv; void *pLunOSEnv;
-	* Modified list_for_each to list_for_each_entry. Modified
-	  list_for_each_safe to list_for_each_entry_safe.
-	* Remove lpfc_dfc.h file.
-	* Changed pHba->phba, pCommand->pcmd
-	* Changed plogi_ndlp -> plogindlp, pos_tmp->postmp, pRsp->prsp,
-	  pCmd->pcmd
-	* Changed pText -> ptext
-	* Changed p_tmp_buff -> ptmpbuff
-	* Changed pBufList -> pbuflist, pRsp -> prsp, pCmd -> pcmd
-	* Changed *pos_tmp -> *postmp, *p_mbuf -> *pmbuf
-	* Following changes are made to the SCSI fast path: Added
-	  DMA_BUF_t member to the lpfc_scsi_buf_t.  This will reduce a
-	  memory allocation in the scsi fast path.  Added check for
-	  targetp == NULL in the scsi fast path.  Increased number of
-	  scatter gather entries in lpfc_scsi_dma_ext to 4 from 3 and
-	  changed the size of lpfc_scsi_dma_ext to 264
-	* Fixing some missing static lpfc_nportdisc.c.
-	* Reordered #include lines so that lpfc.h doesn't have to #include
-	  other header files.
-	* Remove lpfc_get_hba_sym_node_name() as a global EXPORT and make
-	  it static.
-	* Move struct clk_data definition from lpfc_hw.h to lpfc_sli.h.
-	* Changed LPFC_IOCBQ_t to struct lpfc_iocbq.
-	* Changed LPFC_SLI_RING_t to struct lpfc_sli_ring.
-	* Changed LPFC_NODELIST_t to struct lpfc_nodelist.
-	* Rearranged lpfc_nportdisc.c by moving state machine array
-	  (lpfc_disc_action) and the one function that uses it,
-	  lpfc_disc_state_machine, to the end of the file, removing the
-	  need for the raft of prototypes at the top.
-	* Changed LPFC_BINDLIST_t to struct lpfc_bindlist.
-	* Removed lpfc_issue_ct_rsp(), lpfc_sleep(), lpfc_add_bind(),
-	  lpfc_del_bind(), lpfc_sli_wake_mbox_wait() and
-	  lpfc_sli_issue_mbox_wait().
-	* Fixed a large number of overly-long lines.
-	* Fixed some discovery problems: Introduced deferred ndlp removal
-	  when in DSM to avoid panic when in nested DMSs Fix NportId
-	  fffc01 handling to not relogin after LOGO fixed handling of LOGO
-	  on PLOGI issue.
-	* Changed SLI_CT_REQUEST to lpfc_sli_ct_request.
-	* Changed NAME_TYPE to struct lpfc_name.
-	* Changed lpfcCfgParam_t to struct lpfc_cfgparam.
-	* Changed LPFC_STAT_t to struct lpfc_stats.
-	* Changed HBAEVT_t to struct lpfc_hba_event.
-	* Changed Studly_Caps lpfcHBA_t to struct lpfc_hba.
-	* Removed no longer used tasklet_running flag.
-	* Removing *PSOME_VAR typedefs and using SOME_VAR* directly.
-	* Changing .use_clustering to ENABLE_CLUSTERING.
-	* Modify lpfc_queuecommand to return SCSI_MLQUEUE_HOST_BUSY when
-	  it can't queue a SCSI command.  Also, remove cmnds_in_flight
-	  member of struct lpfcHBA for 2.6 kernels as it was only needed
-	  to determine what to return from queuecommand.
-	* Change return type of lpfc_evt_iocb_free to void as it doesn't
-	  return anything.
-	* Remove unused cmnd_retry_list and in_retry members in struct
-	  lpfcHBA.
-	* Remove some instances of unneeded casting of kmalloc's return in
-	  lpfc_scsiport.c
-	* Remove lpfc_linux_attach() and lpfc_linux_detach(). Integrate
-	  them into lpfc_probe_one() and lpfc_release_one() respectively.
-	* Remove lpfc_num_iocbs, lpfc_num_bufs module parameters
-	* Remove #defines for NUM_NODES, NUM_BUFS and NUM_IOCBS
-
-Changes from 20040515 to 20040526
-
-	* Changing version number to 8.0.2.
-	* Including dma-mapping.h as one of the include headers.  Also
-	  rearrange the #include order.
-	* Make functions static as appropriate.
-	* queuecommand() will now return SCSI_MLQUEUE_HOST_BUSY instead of
-	  1 to backpressure midlayer.
-	* Removed function prototypes for lpfc_start_timer() and
-	  lpfc_stop_timer()
-	* Changed timer support to be inline.  Clk_data is now declared
-	  right next to the corresponding timer_list entry so we don't
-	  have to allocate these clk_data dynamically.
-	* Add readls after writels to PCI space to flush the writes.
-	* Fix misspelled word "safety" in function names.
-	* Fix up comments in lpfc.conf for per HBA parameters to reflect
-	  new implementation.
-	* Change lpfc_proc_info handler to get the Nodename from
-	  fc_nodename and not fc_portname.
-	* Fix up some comments and whitespace in lpfc_fcp.c.
-	* Formatting changes: get rid of leading spaces in code
-	* Move discovery processing from tasklet to a kernel thread.
-	* Move ndlp node from unmap list to map list if ADISC completed
-	  successfully.
-	* Flush all the ELS IOCBs when there is a link event.
-	* LP9802 qdepth is twice the LP9802DC qdepth.  Delay
-	  elx_sched_init after READ_CONFIG to get max_xri from the
-	  firmware.  Reset ELX_CFG_DFT_HBA_Q_DEPTH to max_xri after
-	  READ_CONFIG
-	* Fix fc_get_cfg_parm() to be more robust and support embedded hex
-	  values.  The lpfc_param's are now defined as:
-	  lpfc_log_verbose="lpfc:0,lpfc0:0x10,lpfc1:4,lpfc100:0xffff" The
-	  "," delimter does not matter. It can be anything or not exist at
-	  all. ie param = "lpfc:0lpfc0:0x10.lpfc1:4txtlpfc100:0xffff" will
-	  also work.  Additionally the string is treated as case
-	  insensitive.
-	* Changed all usage of lpfc_find_lun_device() to lpfc_find_lun().
-	* Removed unnecessary wrappers lpfc_find_lun_device() and
-	  lpfc_tran_find_lun().
-	* Switch from using internal bus/id/lun to similar data from
-	  scsi_device structure.
-	* Eliminate one-line function lpfc_find_target()
-	* Added slave_alloc, slave_destory
-	* lpfc_scsi_cmd_start can now acquire lun pointer from
-	  scsi_device->hostdata, which is setup in slave_alloc.
-	* Eliminate unnecessary checking on every cmd just to see if we
-	  are accessing the device the first time.
-	* Remove assumption in lpfc_reset_lun_handler that a valid
-	  lpfc_scsi_buf is hung off of linux's scsi_cmnd->host_scribble
-	  when our reset is called.
-
-Changes from 20040507 to 20040515
-
-	* Changed version to 8.0.1
-	* Fixed crash on driver rmmod after error injection tests and
-	  lpfc_tasklet deadlock.
-	* Modified lpfc.conf to remove limit on number of support hosts
-	* Removed HBAAPI 
-	* Removed duplication of SCSI opcodes from lpfc_fcp.h that are
-	  available in scsi/scsi.h
-	* Rework module_param usage
-	* Added MODULE_PARAM_DESC for various module_params
-	* Removed #define EXPORT_SYMTAB
-	* Removed #includes of if_arp.h and rtnetlink.h
-	* Removed string "Open Source" from MODULE_DESC
-	* Cleanup duplicated string definitions used by MODULE_DESC
-	* Renamed lpfc_pci_[detect|release] to lpfc_pci_[probe|remove]_one
-	* Fix formatting of lpfc_driver
-	* Remove unnecessary memset to 0 of lpfcDRVR
-	* Attach driver attributes always unless pci_module_init failed
-	* Remove all one-line wrappers from lpfc_mem.
-	* Remove lpfc_sysfs_set_[show|store] as it is no longer needed
-	* Redo lpfc_sysfs_params_[show|store] to one value per attribute rule
-	* Breakdown lpfc_sysfs_info_show into smaller one value per attribute
-	* Use device attributes instead of driver attributes where appropriate
-	* Remove no longer needed EXPORT_SYMBOLs
-	* Remove some unused code (1600 msg's related)
-
-Changes from 20040429 to 20040507
-
-	* Change version to 8.0.0
-	* Fix the number of cmd / rsp ring entries in lpfc_fcp.c to match
-	  the divisions setup in lpfc_hw.h.
-	* Remove phba->iflag reference.
-	* Several locking improvements.
-	* Remove functions lpfc_drvr_init_lock, lpfc_drvr_lock,
-	  lpfc_drvr_unlock and lpfc_hipri_*.
-	* Remove LPFC_DRVR_LOCK and LPFC_DRVR_UNLOCK macros.
-	* Make lpfc_info() use lpfc_get_hba_model_desc() instead of
-	  rewriting almost identical code.
-	* Fix 1 overly long line in each of lpfc_cfgparm.h, lpfc_ftp.c and
-	  lpfc_sli.c.
-	* Fix build for Red Hat 2.6.3 kernel by #defining MODULE_VERSION
-	  only if it isn't already defined.
-	* Change elx_sli_issue_mbox_wait to return correct error code to
-	  the caller.
-	* In some of the els completion routines, after calling
-	  lpfc_elx_chk_latt, driver ignores the return code of the
-	  lpfc_elx_chk_latt. This will prevent the discovery state machine
-	  restarting correctly when there are link events in the middle of
-	  discovery state machine running. Fix this by exiting discovery
-	  state machine if lpfc_els_chk_latt returns a non zero value.
-	* Removed MAX_LPFC_BRDS from lpfc_diag.h
-	* Removed unused first_check.
-	* Remove some unused fields and defines.
-	* Change lpfc-param names to lpfc_param.
-	* Add use of MODULE_VERSION macro for 2.6 kernels.
-	* Shorten length of some of the comment lines to make them more
-	  readable.
-	* Move FCP_* definitions to their own header file, lpfc_fcp.h.
-	* Remove unused prototypes from lpfc_crtn.h: fcptst, iptst,
-	  lpfc_DELAYMS.
-	* Remove duplicated prototypes from lpfc_crtn.h:
-	  lpfc_config_port_prep, lpfc_config_port_post,
-	  lpfc_hba_down_prep.
-	* Removed some unused export_symbols.
-	* Install driver files into */drivers/scsi/lpfc instead of
-	  */drivers/scsi.
-
-Changes from 20040426 to 20040429
-
-	* Declared export symbol lpfc_page_alloc and lpfc_page_free
-	* Changed lpfc version number to 6.98.3
-	* Move the definition of MAX_LPFC_BRDS to the only header file
-	  that uses it (lpfc_diag.h).
-	* Change lpfc_sli_wake_iocb_wait to do a regular wake_up since
-	  lpfc_sli_issue_iocb_wait now sleeps uninterruptible.
-	* Replace list_for_each() with list_for_each_safe() when a list
-	  element could be deleted.
-	* Fix IOCB memory leak
-
-Changes from 20040416 to 20040426
-
-	* Change lpfc_config_port_prep() to interpret word 4 of the DUMP
-	  mbox response as a byte-count
-	* Add info attribute to sysfs
-	* Minor formatting (spaces to tabs) cleanup in lpfc_sched.h
-	* Remove unused log message number 732
-	* Completing MODULE_PARM -> module_param changes
-	* Removed unused targetenable module parameter
-	* Removed locks from lpfc_sli_issue_mbox_wait routine
-	* Removed code that retry 29,00 check condition
-	* Removed code that manipulates rspSnsLen.
-	* Fix use of lun-q-depth config param
-	* Fix severity inconsistency with log message 249
-	* Removed lpfc_max_target from lpfc_linux_attach
-	* Replace references to lpfcDRVR.pHba[] with lpfc_get_phba_by_inst()
-	* Change lpfc_param to lpfc-param
-	* Partially removed 32 HBA restriction within driver.  Incorporated
-	  lpfc_instcnt, lpfc_instance[], and pHba[] into lpfcDRVR
-	  structure Added routines lpfc_get_phba_by_inst()
-	  lpfc_get_inst_by_phba() lpfc_check_valid_phba()
-	* Turn on attributes "set" & "params" by default.
-	* Further formatting/whitespace/line length cleanup on: lpfc_ct.c
-	  lpfc_els.c lpfc_fcp.c lpfc_hbadisc.c lpfc_init.c lpfc_ipport.c
-	  lpfc_mbox.c lpfc_nportdisc.c lpfc_sched.c lpfc_sched.h
-	  lpfc_scsi.h lpfc_scsiport.c lpfc_sli.c and lpfc_sli.h
-	* Add log message 249 to log any unsupported device addressing
-	  modes encountered.
-	* Add support for 256 targets and 256 LUNs
-	* Fixed panic in lpfc_linkdown.
-	* Removed (struct list_head*) casting in several calls to list_del
-	* Free irq reservation and kill running timers when insmod or
-	  modprobe are killed via ctrl-c
-	* Remove drivers/scsi from include path
-	* Wrap use of log message 311 in macro
-	* Detect failure return from pci_map_sg call in lpfc_os_prep_io
-	* Fix use-after-free of IOCB in lpfc_sli_process_sol_iocb which
-	  was causing an Oops on 2.6.5 kernel.
-	* Cleanup use of several gotos not used for error exit.
-	* Replace memcpy_toio() and memcpy_toio() with endian-dependent
-	  lpfc_memcpy_to_slim() and lpfc_memcpy_from_slim() so that for
-	  big endian hosts like PPC64, the SLIM is accessed 4 bytes at a
-	  time instead of as a byte-stream.
-
-Changes from 20040409 to 20040416
-
-	* The scsi_register and scsi_alloc_host OS calls can fail and
-	  return a zero-valued host pointer.  A ctrl-C on 2.6 kernels
-	  during driver load will cause this and the driver to panic.
-	  Fixed this bug.  Also found a bug in the error_x handling with
-	  lpfc_sli_hba_down - it was in the wrong place and the driver
-	  lock was not held, but needed to be (in lpfc_linux_attach) Fixed
-	  both.  Did some minor comment clean up.
-	* Removed unwanted (void *) castings.
-	* Replace define of INVALID_PHYS, with kernel 2.6.5's
-	  dma_mapping_error() and add a inline function for earlier
-	  kernels.  Remove lpfc_bad_scatterlist().
-	* Clean up formatting in hbaapi.h, lpfc.h, lpfc_cfgparm.h,
-	  lpfc_crtn.h, lpfc_ct.c, lpfc_diag.h, lpfc_disc.h, lpfc_els.c,
-	  lpfc_fcp.c, lpfc_hbadisc.c, lpfc_hw.h, lpfc_init.c,
-	  lpfc_ipport.c, lpfc_logmsg.c, lpfc_logmsg.h and lpfc_scsiport.c
-	  - mostly replacing groups of 8 spaces with hard tabs and keeping
-	  lines to 80 column max..
-	* Removed LPFC_DRVR_LOCK call from lpfc_unblock_requests for 2.4
-	  kernels.  The lpfc_scsi_done routine already unlocks the driver
-	  lock since it expects this lock to be held.
-	* Removed global lock capabilities from driver lock routines
-	* Remove SA_INTERRUPT flag from request_irq
-	* Move dma_addr_t cast inside of getPaddr macro as everywhere
-	  getPaddr is used, the return is cast to dma_addr_t.
-	* Clean up formatting in lpfc_sli.c and lpfc_sysfs.c - mostly
-	   replacing groups of 8 spaces with hard tabs and keeping lines
-	   to 80 column max.
-	* Fix build for RHEL 2.1 BOOT kernels by always #including
-	  interrupt.h in lpfc.h.
-	* Fix RHEL 3 build by #defining EXPORT_SYMTAB.
-	* Replace sprintf with snprintf in lpfc_proc_info.
-	* Fix build warnings on 2.6 kernels - remove no longer used calls
-	  to  character device initialization.
-	* Initial support code for discovery in tasklet conversion.
-	* Removing char interface and ioctl code.
-	* Change all elx prefixes to lpfc
-	* Replace lpfc_write_slim() & lpfc_read_slim() with memcpy_toio(),
-	  memcpy_fromio(), writel() & readl().
-
-Changes from 20040402 to 20040409
-
-	* Replaced lpfc_read_hbaregs_plus_offset and
-	  lpfc_write_hbaregs_plus_offset functions with readl and writel.
-	* Get rid of long mdelay's in insmod path
-	* Changed the way our pci_device_id structures are initialized
-	* Replace lpfc_read/write_CA/HA/HC/HS with calls to readl() &
-	  writel() directly.
-	* Increase SLI2_SLIM to 16K Increase cmd / rsp IOCBs accordingly
-	* Removed lpfc_els_chk_latt from the lpfc_config_post function.
-	  lpfc_els_chk_latt will enable the link event interrupts when
-	  flogi is pending which causes two discovery state machines
-	  running parallelly.
-	* Add pci_disable_device to unload path.
-	* Move lpfc_sleep_event from lpfc_fcp.c to lpfc_util_ioctl.c
-	* Call dma_map_single() & pci_map_single() directly instead of via
-	  macro lpfc_pci_map().  Allow address 0 for PPC64.
-	* Change sleep to uninterruptible in lpfc_sli_issue_icob_wait
-	  because this function doesn't handle signals.
-	* Move lpfc_wakeup_event from lpfc_fcp.c to lpfc_ioctl.c
-	* Remove unneeded #include <linux/netdevice.h>
-	* Remove unused clock variables lpfc_clkCnt and lpfc_sec_clk.
-	* Get rid of capitalization of function names.
-	* Removed lpfc_addr_sprintf.
-	* Implemented gotos in lpfc_linux_attach for error cases.
-	* Replace mlist->dma.list = dmp->dma.list; to mlist = dmp.
-	* Remove functions lpfc_get_OsNameVersion and elx_wakeup. Change
-	  elx_wakeup to wake_up_interruptible
-	* Add function lpfc_get_os_nameversion and change
-	  lpfc_get_OsNameVersion to lpfc_get_os_nameversion.
-	* Remove lpfc_get_OsNameVersion
-	* Change driver name to a consistent lpfc in every visible place.
-	* Fix build warning: removed unused variable ret in lpfc_fdmi_tmo.
-	* Remove lpfc_utsname_nodename_check function
-	* Remove functions lpfc_register_intr and lpfc_unregister_intr
-	* Fill in owner field in lpfc_ops file_operations struct and
-	  remove now unnecessary open and close entry points.
-	* Change function name prefixes from elx_ to lpfc_
-	* Remove special case check for TUR in elx_os_prep_io()
-	* Renamed elx_scsi.h to lpfc_scsi.h
-	* Renamed elx_sched.h to lpfc_sched.h
-	* Renamed elx_mem.h to lpfc_mem.h
-	* Renamed elx_sli.h to lpfc_sli.h
-	* Renamed elx_logmsg.h to lpfc_logmsg.h
-	* Renamed elx.h to lpfc.h
-	* Renamed elx_sli.c to lpfc_sli.c
-	* Renamed elx_sched.c to lpfc_sched.c
-	* Renamed elx_mem.c to lpfc_mem.c
-	* Renamed elx_logmsg.c to lpfc_logmsg.c
-	* Renamed lpfcLINUXfcp.c lpfc_fcp.c
-	* Renamed elx_clock.c to lpfc_clock.c
-	* Reduce stack usage in lpfc_info().
-	* Move lpip_stats structure from lpfc_hba.h to lpfc_ip.h.
-	* Move lpfc_stats and HBAEVT_t structures from lpfc_hba.h to
-	  lpfc.h
-	* Remove lpfc_hba.h
-	* Remove duplicate rc definitions from 
-	* Removed code which used next pointer to store mbox structure.
-	* Cleaned up list iterations.
-	* Removed non list manipulation of the next pointers.
-	* Change list_del()/INIT_LIST_HEAD sequences to list_del_init()
-	* In ELX_IOCBQ_t: Moved hipri_trigger field to iocb_flag. Combined
-	  hipri_wait_queue and rsp_iocb in union
-	* Replaced casting from list_head with list_entry macro.
-	* Added ct_ndlp_context field to the ELX_IOCBQ_t.
-	* Do not use DMABUf_t list to store ndlp context
-	* Return 0 from lpfc_process_iotcl_util() when ELX_INITBRDS
-	  succeeds.
-	* remove elx_os_scsiport.h
-	* Do not use DMABUf_t list to hold rpi context
-	* Replace elx_cfg_* names with lpfc_cfg-*
-	* Moved FCP activity to ring 0.  Moved ELS/CT activity to ring 2.
-	* Clean up formatting of elx_sli.h (tabs for indents, 80 column
-	  lines).
-	* Remove unused elxclock declaration in elx_sli.h.
-	* Since everywhere IOCB_ENTRY is used, the return value is cast,
-	  move the cast into the macro.
-	* Split ioctls out into separate files
-
-Changes from 20040326 to 20040402
-
-	* Updated ChangeLog for 20040402 SourceForge drop.
-	* Use safe list iterator for ndlp list
-	* Added code to return NLP_STE_FREED_NODE from the discovery
-	  state machine functions if the node is freed from the
-	  function.
-	* Fixes to DMABUF_t handling
-	* Fix for load error in discovery
-	* Remove loop_cnt variable from lpfc_rcv_plogi_unused_node.
-	* Remove nle. reference.
-        * Remove support for building 2.4 drivers
-	* Remove elx_util.h and replace elx_disc.h with lpfc_disc.h
-	* Implemented the Linux list macros in the discovery code.
-	  Also moved elx_disc.h contents into lpfc_disc.h
-	* Unused variable cleanup
-	* Use Linux list macros for DMABUF_t
-	* Break up ioctls into 3 sections, dfc, util, hbaapi
-	  rearranged code so this could be easily separated into a
-	  different module later. All 3 are currently turned on by
-	  defines in lpfc_ioctl.c LPFC_DFC_IOCTL, LPFC_UTIL_IOCTL,
-	  LPFC_HBAAPI_IOCTL
-	* Misc cleanup: some goto's; add comments; clarify function
-	  args
-	* Added code to use list macro for ELXSCSITARGET_t.
-	* New list implementation for ELX_MBOXQ_t
-	* Cleaned up some list_head casting.
-	* Put IPFC ifdef around two members of struct lpfc_nodelist.
-	* Cleaned up iocb list using list macros and list_head data
-	  structure.
-	* lpfc_online() was missing some timer routines that were
-	  started by lpfc_linux_attach().  These routines are now also
-	  started by lpfc_online().  lpfc_offline() only stopped
-	  els_timeout routine.  It now stops all timeout routines
-	  associated with that hba.
-	* Replace separate next and prev pointers in struct
-	  lpfc_bindlist with list_head type.  In elxHBA_t, replace
-	  fc_nlpbind_start and _end with fc_nlpbind_list and use
-	  list_head macros to access it.
-	* Fix ulpStatus for aborting I/Os overlaps with newer firmware
-	  ulpStatus values
-	* Rework params_show/store to be consistent as the other
-	  routines.  Remove generic'ness and rely on set attribute.
-	* Remove unused log message.
-	* Collapse elx_crtn.h and prod_crtn.h into lpfc_crtn.h
-	* Ifdef Scheduler specific routines
-	* Removed following unused ioctl's: ELX_READ_IOCB
-	  ELX_READ_MEMSEG ELX_READ_BINFO ELX_READ_EINVAL ELX_READ_LHBA
-	  ELX_READ_LXHBA ELX_SET ELX_DBG LPFC_TRACE 
-	* Removed variable fc_dbg_flg
-	* Fixed a bug where HBA_Q_DEPTH was set incorrectly for
-	  3-digit HBAs.  Also changed can_queue so midlayer will only
-	  send (HBA_Q_DEPTH - 10) cmds.
-	* Clean up code in the error path, check condition.  Remove
-	  unused sense-related fields in lun structure.
-	* Added code for safety pools for following objects: mbuf/bpl,
-	  mbox, iocb, ndlp, bind
-	* Wrapped '#include <elx_sched.h>' in '#ifdef USE_SCHEDULER'.
-	* Fixed 'make clean' target.
-        * Build now ignores elx_sched.o, and includes lpfc_sysfs.o.
-	* Wrapped lpfndd.o target in BUILD_IPFC ifdef.
-	* Removed elx_os.h inclusion in implementation files.
-	* Removed ELX_OS_IO_t data structure and put data direction
-	  and non scatter/gather physical address into the scsi buffer
-	  structure directly.  Moved DRVR_LOCK, putPaddr, getPaddr
-	  macros and some defines into elx.h since they are required
-	  by the whole driver.
-	* Migrated following ioctls (debug) ELX_DISPLAY_PCI_ALL
-	  ELX_DEVP ELX_READ_BPLIST ELX_RESET_QDEPTH ELX_STAT.
-	* Step 1 of attempt to move all Debug ioctls to sysfs.
-	  Implemented the following IOCTLs in sysfs: ELX_WRITE_HC
-	  ELX_WRITE_HS ELX_WRITE_HA ELX_WRITE_CA ELX_READ_HC
-	  ELX_READ_HS ELX_READ_HA ELX_READ_CA ELX_READ_MB ELX_RESET
-	  ELX_READ_HBA ELX_INSTANCE ELX_LIP.  Also introduced
-	  attribute "set" to be used in conjunction with the above
-	  attributes.
-	* Removed DLINK, enqueue and dequeue declarations now that clock
-	  doesn't use them anymore
-	* Separated install rule so that BUILD_IPFC has to be set when
-	  make is called in order for the install rule to attempt to
-	  copy the lpfndd.o driver.  This change fixes a bug that
-	  occurs because the install rule by default attempted to
-	  install lpfndd.o, whereas the default make rule did not by
-	  default build lpfndd.o.
-	* Keep track if hbaapi index numbers need to be refreshed.
-	* Removed prod_os.h from include list.
-	* Removed LPFC_LOCK and LPFC_UNLOCK macros.  Added OS calls
-	  into elx_os_scsiport.c.  This file is now empty.
-	* Added spin_lock_irqsave and spin_unlock_irqrestore calls
-	  into code directly and removed LPFC_LOCK_ and _UNLOCK_
-	  macros
-	* Remove references to "elx_clock.h"
-	* Added utsname.h to include list.  The previous checkin to
-	  elx_os.h removed its inclusion of utsname.h since there is
-	  precious little in the file.  However, lpfcLINUXfcp.c needs
-	  it and now has it.
-	* Removed some commented-out code
-	* Removed elx_lck_t data structure, stray elxDRVR_t type, and
-	  include from file.  No longer used.
-	* Removed two PCI Sync defines.  Removed includes - not
-	  needed.  Cleaned up macro lines.
-	* Added two functions from elxLINUXfcp.c.  These functions
-	  were IPFC specific.
-	* Removed hipri lock abstractions and added OS call into code.
-	  Removed elx_lck_t and added spinlock_t directly. Moved two
-	  IPFC functions into lpfc_ipport.c
-	* Moved IP specific structures to lpfc_ip.h file.
-	* lpfc_ipfarp_timeout() uses system timer.  Remove all usages
-	  of old internal clock support.
-	* Made changes to compile without IPFC support for the default
-	  build.  Added ifdef IPFC for all lpfc_ip.h includes.
-	* Patched elx_free_scsi_buf
-  	* Removed elx_sched.o from 2.6 dependencies
-	* Reworked lpfc_pcimap.
-	* Use Linux swap macros to replace ELX swapping macros
-	  (SWAP_SHORT, SWAP_LONG, SWAP_DATA, SWAP_DATA16,
-	  PCIMEM_SHORT, PCIMEM_LONG, PCIMEM_DATA).
-	* move in_interrupt() check inside of elx_sleep_ms()
-	* Moved location of pci.h include.
-	* Restored elx_lck_t types in elxHBA_t.
-	* Removed elx_pci_dma_sync call.  Also removed some PCI
-	  defines from elx_hw.h and removed the spinlock_t locks that
-	  are no longer used in elx.h
-	* elx_iodone() now uses system timer.
-  	* elx_qfull_retry() now uses system timer.
-	* lpfc_put_buf(), lpfc_ip_xri_timeout() and
-	  lpfc_ip_timeout_handler() now use system timer.
-	* lpfc_fdmi_tmo() and lpfc_qthrottle_up() now use system
-          timer.
-	* Removed num_bufs and num_iocbs configuration parameters.
-	* Fixed a memory corruption bug. This was caused by a memory
-	  write to ndlp structure from lpfc_cmpl_els_acc function.
-	  This ndlp structure was freed from lpfc_els_unsol_event.
-	* lpfc_disc_timeout() and lpfc_establish_link_tmo() now use
-	  system timer.  Also update lpfc_els_retry_delay() to do a
-	  single lock release at the end.
-	* Remove use of PAN (pseudo adapter number).
-	* Reintroduced usage of the cross compiler for building on
-	  ppc64 to remove build errors that were cropping up when
-	  using the standard gcc compiler.
-	* Fix no-unlock-before return in lpfc_els_retry_delay which was
-	  causing  a deadlock on insmod in some environments.
-	* Minor format changes fix up comments
-	* Create utility clock function elx_start_timer() and
-	  elx_stop_timer().  All timeout routines now use these common
-	  routines.
-	* Minor formatting changes fix up comments
-	* Minor formatting changes get rid of failover defines for
-	  syntax checking
-	* Minor formatting changes remove ISCSI defines.
-	* Fix typo in install target for 2.4 kernels.
-	* Removed unused elx_scsi_add_timer extern function
-	  declaration.
-	* Cleanup casting around DMA masks.
-	* Comment out lpfndd.o modules_install section as lpfndd.o is
-	  not generated if CONFIG_NET_LPFC is not set. Also refer to
-	  BASEINCLUDE only in out of kernel source module builds as it
-	  will not exist otherwise.
-	* Removed unused malloc counters from lpfcLINUXfcp.c.
-	* Remove some unnecessary #includes in lpfcLINUXfcp.c
-	* Remove unnecessary #includes in elxLINUXfcp.c
-	* Minor formatting cleanups in Makefile to avoid some
-          linewrapping.
-	* Removed unused elx_mem_pool data structure.
-	* Remove several unnecessary #includes.
-	* Moving fix for memory leak in ioctl lip area to sysfs's lip.
-	* Removed unused elx_dma_handle_t elx_acc_handle_t
-	  FC_MAX_SEGSZ and FC_MAX_POOL.
-	* Rewrite of Makefile. Fixes breakages with make -j4 during
-	  kernel compile. Does not recompile all files on every
-	  build. Uses the kernel build's definitions of CFLAGS,
-	  MODFLAGS etc. Removed "make rpm" option.
-	* Removed unused #defines CLOSED, DEAD, OPENED, NORMAL_OPEN
-	  and unneeded #include of elx_sched.h in elx.h.
-	* Several log message updates
-	* Add PCI_DEVICE_ID_FIREFLY for LP6000
-	* Fixed known issues in 20040326: driver crashes on rmmod in
-	  both 2.4 and 2.6 kernels
-	
-
-Changes from 20040319 to 20040326
-
-	* Updated ChangeLog for 20040326 SourceForge drop.
-	* remove lpfc_isr / lpfc_tmr logic fixed up 8 spaces from
-	  previous checkins with tabs
-	* replace elx_in_intr() with in_interrupt()
-	* Remove unused messages 1602 and 1603.
-	* Fix the following issues with log messages: Remove unused
-	  messages 406, 407, 409, 927, 928, 1201, 1202, 1204, 1205, 1206
-	  and 1207.  Create a new message 738 to fix duplicate instances
-	  of 736.
-	* Removed remaining pci interface abstractions from elxLINUXfcp.c.
-	  Implemented OS calls directly in all remaining files and cleaned
-	  up modules.  Removed prototypes as well.
-	* Removed following functions/structures elx_mem_dmapool
-	  elx_idx_dmapool elx_size_dmapool elx_kmem_lock dfc_data_alloc
-	  dfc_data_free dfc_mem struct mbuf_info elx_acc_handle_t
-	  data_handle elx_dma_handle_t dma_handle struct elx_memseg
-	  MEMSEG_t
-	* lpfc_els_timeout_handler() now uses system timer.
-	* Further cleanup of #ifdef powerpc
-	* lpfc_scsi_timeout_handler() now uses system timer.
-	* Replace common driver's own defines for endianness w/ Linux's
-	  __BIG_ENDIAN etc.
-	* Added #ifdef IPFC for all IPFC specific code.
-	* lpfc_disc_retry_rptlun() now uses system timer.
-	* lpfc_npr_timeout() now uses system timer.
-	* Modified detect code, on insmod, to only wait a max of 2 secs if
-	  link comes up and there are no devices.
-	* Move remaining message logging functions into
-	  elx_logmsg.c/elx_logmsg.h.
-	* Added code to clear link attention bit when there is a pending
-	  link event and the memory allocation for read_la mail box
-	  command fails.
-	* Removed function calls for mapping bar registers and allocating
-	  kernel virtual memory mappings to the mapped bars Removed
-	  prototypes, lpfc_driver_cache_line, and pci_bar1_map rename to
-	  pci_bar2_map.
-	* Allocate mbox only if the hba_state is in ready state.
-	* Complete lip support via sysfs. To lip, echo brdnum >
-	  /sys/bus/pci/drivers/lpfc/lip.
-	* moving sysfs show/store implementations to lpfc_sysfs.c. Also add
-	  support for lip.
-	* Add files: lpfc_sysfs.c, lpfc_sysfs.h
-	* move LPFC_DRIVER_NAME and LPFC_MODULE_DESC out of lpfcLINUXfcp.c
-	  to lpfc_version.h, since it is now needed in lpfc_sysfs.c
-	* elx_mbox_timeout now uses system timer
-	* Changed lpfc_nodev_timeout, lpfc_els_retry_delay and
-	  lpfc_linkdown_timeout to use the system timer instead of
-	  internal clock support.
-	* Move remaining message logging functions in elx_util.c to
-	  elx_logmsg.c.
-	* Remove some unnecessary typecasting.
-	* Remove log message that is no longer used (was used by
-	  elx_str_atox).
-	* Replaced DLINK_t and SLINK_t by standard Linux list_head
-	* Removed deque macro
-	* Replaced ELX_DLINK_t and ELX_SLINK_t by Linux struct list_head
-	  (except for clock)
-	* Removed following functions from code: linux_kmalloc linux_kfree
-	  elx_alloc_bigbuf elx_free_bigbuf
-	* Removed following abstract functions from the code.  elx_malloc
-	  elx_free elx_ip_get_rcv_buf elx_ip_free_rcv_buf
-	  elx_mem_alloc_dmabuf elx_mem_alloc_dmabufext elx_mem_alloc_dma
-	  elx_mem_alloc_buf lpfc_bufmap
-	* Removed custom PCI configuration #defines and replaced with
-	  OS-provided #defines. Also added linux/pci.h to *.c files.
-	* Remove elx_str_ctox.	Replace elx_str_atox with sscanf.
-	* Many indentation/whitespace fixes.
-	* Replace elx_str_ctox with isxdigit where it was only used to
-	  check the value of a character.
-	* Removed following functions from the code.  elx_kmem_free
-	  elx_kmem_alloc elx_kmem_zalloc
-	* Change use of 2.4 SCSI typedef Scsi_Host_Template to	struct
-	  scsi_host_template for 2.6 kernels.
-	* Change use of 2.4 SCSI typedefs (Scsi_Device, Scsi_Cmnd,
-	  Scsi_Request) the their real struct names.
-	* Move 2.6 compatibility irqreturn definitions to lpfc_compat.h.
-	  Protect these definitions from conflicting with similar ones in
-	  later 2.4 kernels.
-	* Remove unused definitions: LINUX_TGT_t, LINUX_LUN_t,
-	  LINUX_BUF_t, elx_lun_t, SET_ADAPTER_STATUS.
-	* Convert pci_ calls to linux 2.6 dma_ equivalents.
-	* Removed unused types: struct buf, struct sc_buf, T_SCSIBUF
-	  typedef.
-	* Fix Makefile so that 2.4 drivers don't always rebuild all files.
-	* Remove unused _static_ and fc_lun_t definitions.
-	* Cleaned up some memory pool implementation code.
-	* Fix panic with char dev changes. Turns out that 2.6.4 code does
-	  the same in kernel space with the 2.4 interface style
-	  definitions. So remove the new char dev code altogether.
-	* Remove typecasting from fc_get_cfg_param and consolidate
-	  multiple instances of the parameter switch into a single
-	  instance.
-	* Use lpfc_is_LC_HBA() macro that tests pcidev->device directly
-	  instead of saving a private copy that undergoes varied shifting
-	  & casting.
-	* Removed usage of all memory pools.
-
-Changes from 20040312 to 20040319
-	
-	* Use dev_warn instead of printk for 2.6 kernels
-	* Correct Iocbq completion routine for 2.6 kernel case
-	* Change void *pOSCmd to Scsi_Smnd *pCmd
-	* Change void *pOScmd to struct sk_buff *pCmd
-	* Remove data direction code.
-	* Removed memory pool for buf/bpl buffers and use kmalloc/kfree
-	  pci_pool_alloc/free directly.
-	* Move PPC check for DMA address 0 in scatter-gather list, into
-	  lpfc_compat.h
-	* Always use pci_unmap_single() instead of pci_unmap_page()
-	* Clean up the 2.6 vs 2.4 #if blocks.
-	* Conditionalize Scheduler
-	* Add a comment to explain a little what the first Makefile
-	  section does.
-	* Removed lpfc_intr_post
-	* Sysfs new display format. Also added write functionality. You
-	  can [ echo "0 log_verbose 3" >
-	  /sys/bus/pci/drivers/lpfc/params]. Hex support yet to be added.
-	* Removed several #ifdef powerpc, including for a discovery issue
-	  in lpfc_ValidLun()
-	* Change elx_printf_log to use vsprintf.
-	* Added lpfc_compat.h provides macros to aid compilation in the
-	  Linux 2.4 kernel over various platform architectures.  Initially
-	  support mapping to a DMA address.
-	* Removed memory pool for nlp/bind buffers and use kmalloc/kfree
-	  directly.
-	* Removed memory pool for iocb buffers and use kmalloc/kfree
-	  directly.
-	* Removed memory pool for mailbox buffers and use kmalloc/kfree
-	  directly.
-	* Cleaned up back and forth casts
-	* Initial support for sysfs for 2.6 kernel.
-	* Changed elx_dma_addr_t to dma_addr_t
-	* Fix a 2.6 kernel check to be >= 2.6.0 instead of > (was missing
-	  2.6.0).
-	* Remove elx_printf and elx_str_sprintf. Replace elx_print with
-	  printk.
-	* Replace elx_printf with printk.
-	* Replace elx_str_sprintf with sprintf.
-	* Removed the mem_lock, its prototype, function, macro, and
-	  iflags.
-	* Use kmalloc/kfree for ELX_SCSI_BUF_t
-	* Use linux pci_pools for SCSI_DMA_EXT
-	* Use linux pci_pools for BPLs.
-	* Minor cleanup of DFC args for PPC64.
-	* Several small indentation cleanups.
-	* New Linux 2.6 style of char device registration.
-	* Migrated members of LPFCHBA_t and LINUX_HBA_t into elxHBA_t
-	* Use strcpy, strncmp, isdigit, strlen instead of abstractions
-	* Cleanup of driver_template.
-	* Facilitate compile time turn on/off of lpfc_network_on.
-	* Split large source files into smaller, better named ones.
-
-Changes from 2.10a to 20040312
-
-	* Fix build for 2.4 kernels
-	* Move driver version macros into lpfc_version.h file.
-	* Fixed data miscompare with LIP.
-	* Removed elx_sli, elx_ioc, elx_disc, elx_sch routines,
-	  prototypes, and reference points.
-	* Correct the space insertions with hardtabs
-	* Remove routine call pointers in ELX_SLI_INIT_t struct.
-	* Removed module locks except for drvr, mem, and clock.
-	* Removed unused module locks from sourcebase. Kept drvr_lock,
-	  mem_lock, and clock_lock.
-	* Change NULL to 0
