@@ -49,6 +49,13 @@ static void mpi3mr_send_event_ack(struct mpi3mr_ioc *mrioc, u8 event,
#define MPI3_EVENT_WAIT_FOR_DEVICES_TO_REFRESH (0xFFFE)
+/*
+ * SAS Log info code for a NCQ collateral abort after an NCQ error:
+ * IOC_LOGINFO_PREFIX_PL | PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR
+ * See: drivers/message/fusion/lsi/mpi_log_sas.h
+ */
+#define IOC_LOGINFO_SATA_NCQ_FAIL_AFTER_ERR 0x31080000
+
/**
* mpi3mr_host_tag_for_scmd - Get host tag for a scmd
* @mrioc: Adapter instance reference
@@ -3430,7 +3437,18 @@ void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc,
scmd->result = DID_NO_CONNECT << 16;
break;
case MPI3_IOCSTATUS_SCSI_IOC_TERMINATED:
- scmd->result = DID_SOFT_ERROR << 16;
+ if (ioc_loginfo == IOC_LOGINFO_SATA_NCQ_FAIL_AFTER_ERR) {
+ /*
+ * This is a ATA NCQ command aborted due to another NCQ
+ * command failure. We must retry this command
+ * immediately but without incrementing its retry
+ * counter.
+ */
+ WARN_ON_ONCE(xfer_count != 0);
+ scmd->result = DID_IMM_RETRY << 16;
+ } else {
+ scmd->result = DID_SOFT_ERROR << 16;
+ }
break;
case MPI3_IOCSTATUS_SCSI_TASK_TERMINATED:
case MPI3_IOCSTATUS_SCSI_EXT_TERMINATED:
With the ATA error model, an NCQ command failure always triggers an abort (termination) of all NCQ commands queued on the device. In such case, the SAT or the host must handle the failed command according to the command sense data and immediately retry all other NCQ commands that were aborted due to the failed NCQ command. For SAS HBAs controlled by the mpi3mr driver, NCQ command aborts are not handled by the HBA SAT and sent back to the host, with an ioc log information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function mpi3mr_process_op_reply_desc() always forces a retry of commands terminated with the status MPI3_IOCSTATUS_SCSI_IOC_TERMINATED using the SCSI result DID_SOFT_ERROR, regardless of the ioc_loginfo for the command. This correctly forces the retry of collateral NCQ abort commands, but with the retry counter for the command being incremented. If a command to an ATA device is subject to too many retries due to other NCQ commands failing (e.g. read commands trying to access unreadable sectors), the collateral NCQ abort commands may be terminated with an error as they run out of retries. This violates the SAT specifications and causes hard-to-debug command errors. Solve this issue by modifying the handling of the MPI3_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an ATA device and if the command ioc_loginfo indicates an NCQ collateral abort. If that is the case, force the command retry using the SCSI result DID_IMM_RETRY to avoid incrementing the command retry count. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> --- drivers/scsi/mpi3mr/mpi3mr_os.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)