mbox series

[v6,0/2] Add support for Tegra UART Trace Controller (UTC) client

Message ID 20250213125612.4705-1-kkartik@nvidia.com
Headers show
Series Add support for Tegra UART Trace Controller (UTC) client | expand

Message

Kartik Rajput Feb. 13, 2025, 12:56 p.m. UTC 
The Tegra UTC (UART Trace Controller) is a hardware controller that allows
multiple systems within the Tegra SoC to share a hardware UART interface.
It supports up to 16 clients, with each client having its own interrupt and a
FIFO buffer for both RX (receive) and TX (transmit), each capable of holding
128 characters.

The Tegra UTC uses 8-N-1 configuration and operates on a pre-configured
baudrate, which is configured by the bootloader.

Kartik Rajput (2):
  dt-bindings: serial: Add bindings for nvidia,tegra264-utc
  serial: tegra-utc: Add driver for Tegra UART Trace Controller (UTC)

 .../bindings/serial/nvidia,tegra264-utc.yaml  |  73 ++
 drivers/tty/serial/Kconfig                    |  23 +
 drivers/tty/serial/Makefile                   |   1 +
 drivers/tty/serial/tegra-utc.c                | 625 ++++++++++++++++++
 4 files changed, 722 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/serial/nvidia,tegra264-utc.yaml
 create mode 100644 drivers/tty/serial/tegra-utc.c