Show patches with: State = Action Required       |   4795 patches
« 1 2 ... 44 45 46 … 47 48 »
Patch Series S/W/F Date Submitter Delegate State
[10/18] dt-bindings: rcar-dmac: Document r8a7742 support Add R8A7742/RZG1H board support --- 2020-04-29 Prabhakar Mahadev Lad New
[08/18] dt-bindings: irqchip: renesas-irqc: Document r8a7742 bindings Add R8A7742/RZG1H board support --- 2020-04-29 Prabhakar Mahadev Lad New
[06/18] pinctrl: sh-pfc: r8a7790: Add r8a7742 PFC support Add R8A7742/RZG1H board support --- 2020-04-29 Prabhakar Mahadev Lad New
[04/18] ARM: debug-ll: Add support for r8a7742 Add R8A7742/RZG1H board support --- 2020-04-29 Prabhakar Mahadev Lad New
[02/18] ARM: shmobile: defconfig: Enable r8a7742 SoC Add R8A7742/RZG1H board support --- 2020-04-29 Prabhakar Mahadev Lad New
serial: msm_geni_serial_console : Add Earlycon support serial: msm_geni_serial_console : Add Earlycon support --- 2020-04-29 Mukesh, Savaliya New
serial: kgdboc: Allow earlycon initialization to be deferred serial: kgdboc: Allow earlycon initialization to be deferred --- 2020-04-29 Daniel Thompson New
[v3,09/11] serial: qcom_geni_serial: Support kgdboc_earlycon [v3,01/11] kgdb: Disable WARN_CONSOLE_UNLOCKED for all kgdb --- 2020-04-28 Doug Anderson New
[v3,06/11] kgdb: Prevent infinite recursive entries to the debugger [v3,01/11] kgdb: Disable WARN_CONSOLE_UNLOCKED for all kgdb --- 2020-04-28 Doug Anderson New
[v3,05/11] arm64: Add call_break_hook() to early_brk64() for early kgdb [v3,01/11] kgdb: Disable WARN_CONSOLE_UNLOCKED for all kgdb --- 2020-04-28 Doug Anderson New
[v3,01/11] kgdb: Disable WARN_CONSOLE_UNLOCKED for all kgdb [v3,01/11] kgdb: Disable WARN_CONSOLE_UNLOCKED for all kgdb --- 2020-04-28 Doug Anderson New
serial: earlycon: Allow earlier DT scan is acpi=off serial: earlycon: Allow earlier DT scan is acpi=off --- 2020-04-28 Daniel Thompson New
[v3,01/17] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state [v3,01/17] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state --- 2020-04-28 Rajendra Nayak New
[8/8] dt-bindings: display: Convert ingenic,lcd.txt to YAML Untitled series #39229 --- 2020-04-26 Paul Cercueil New
[6/8] dt-bindings: i2c: Convert i2c-jz4780.txt to YAML Untitled series #39229 --- 2020-04-26 Paul Cercueil New
[4/8] dt-bindings: memory: Convert ingenic,jz4780-nemc.txt to YAML Untitled series #39229 --- 2020-04-26 Paul Cercueil New
[2/8] dt-bindings: intc: Convert ingenic,intc.txt to YAML Untitled series #39229 --- 2020-04-26 Paul Cercueil New
[v5,5/5] drivers/tty/serial: add LiteUART driver [v5,1/5] dt-bindings: vendor: add vendor prefix for LiteX --- 2020-04-25 Mateusz Holenko New
[v5,3/5] drivers/soc/litex: add LiteX SoC Controller driver [v5,1/5] dt-bindings: vendor: add vendor prefix for LiteX --- 2020-04-25 Mateusz Holenko New
[v2,7/9] Documentation: kgdboc: Document new earlycon_kgdboc parameter Untitled series #39233 --- 2020-04-21 Doug Anderson New
[v2,6/9] kgdboc: Add earlycon_kgdboc to support early kgdb using boot consoles Untitled series #39233 --- 2020-04-21 Doug Anderson New
[v2,4/9] kgdb: Delay "kgdbwait" to dbg_late_init() by default Untitled series #39233 --- 2020-04-21 Doug Anderson New
[v2,2/9] Revert "kgdboc: disable the console lock when in kgdb" Untitled series #39233 --- 2020-04-21 Doug Anderson New
[v3,2/2] tty: serial: Add modem control gpio support for STM32 UART Add CTS/RTS gpio support to STM32 UART --- 2020-04-20 Manivannan Sadhasivam New
[v2] tty: serial: don't do termios for BTIF [v2] tty: serial: don't do termios for BTIF --- 2020-04-20 Sean Wang New
[v8,1/3] serial: samsung: Replace rd_regb/wr_regb with rd_reg/wr_reg [v8,1/3] serial: samsung: Replace rd_regb/wr_regb with rd_reg/wr_reg --- 2020-04-20 Hyunki Koo New
[v2,2/2] dt-bindings: serial: Convert 8250 to json-schema dt-bindings: serial: Convert 8250 to json-schema --- 2020-04-19 Lubomir Rintel New
[v2,01/17] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state [v2,01/17] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state --- 2020-04-17 Rajendra Nayak New
[1/2] tty: rocket, remove unneeded variable [1/2] tty: rocket, remove unneeded variable --- 2020-04-17 Jiri Slaby New
[v2,2/2] dt-bindings: serial: Document CTS/RTS gpios in STM32 UART Add CTS/RTS gpio support to STM32 UART --- 2020-04-16 Manivannan Sadhasivam New
[v2] serial: fsl_lpuart: Change DMA failure messages to debug level [v2] serial: fsl_lpuart: Change DMA failure messages to debug level --- 2020-04-16 Fabio Estevam New
[v3,1/4] dt-bindings: ttyvs: document serial null modem driver bindings [v3,1/4] dt-bindings: ttyvs: document serial null modem driver bindings --- 2020-04-16 rishi gupta New
serial: lpc32xx_hs: Drop surplus include serial: lpc32xx_hs: Drop surplus include --- 2020-04-15 Linus Walleij New
[V4,6/9] spi: spi-geni-qcom: Add interconnect support [V4,1/9] interconnect: Add devm_of_icc_get() as exported API for users --- 2020-04-15 Akash Asthana New
[1/2] vt: selection, split __set_selection_kernel [1/2] vt: selection, split __set_selection_kernel --- 2020-04-15 Jiri Slaby New
[2/2] tty: serial: Add software flow control support for STM32 USART Untitled series #39246 --- 2020-04-12 Manivannan Sadhasivam New
[v7,2/2] Support 32-bit access for the TX/RX hold registers UTXH and URXH. Untitled series #39247 --- 2020-04-11 Hyunki Koo New
[7/7] serial: 8250_early: Support earlycon_kgdboc [1/7] kgdboc: Use a platform device to handle tty drivers showing up late --- 2020-04-10 Doug Anderson New
[4/7] kgdboc: Add earlycon_kgdboc to support early kgdb using boot consoles [1/7] kgdboc: Use a platform device to handle tty drivers showing up late --- 2020-04-10 Doug Anderson New
[3/7] arm64: Add call_break_hook() to early_brk64() for early kgdb [1/7] kgdboc: Use a platform device to handle tty drivers showing up late --- 2020-04-10 Doug Anderson New
[1/7] kgdboc: Use a platform device to handle tty drivers showing up late [1/7] kgdboc: Use a platform device to handle tty drivers showing up late --- 2020-04-10 Doug Anderson New
[v2,1/2] serial: uartps: Wait for tx_empty in console setup serial: uartps: Add tx_empty checks --- 2020-04-09 Raviteja Narayanam New
serial: uartps: Wait for tx_empty in console setup serial: uartps: Wait for tx_empty in console setup --- 2020-04-07 Raviteja Narayanam New
[v6,1/2] dt-bindings: serial: Add reg-io-width compatible [v6,1/2] dt-bindings: serial: Add reg-io-width compatible --- 2020-04-06 Hyunki Koo New
drivers/tty: emove redundant assignment to variable i and rename it to ret drivers/tty: emove redundant assignment to variable i and rename it to ret --- 2020-04-05 Colin King New
tty: serial: fsl_lpuart: make coverity happy tty: serial: fsl_lpuart: make coverity happy --- 2020-04-03 Michael Walle New
[7/7] Revert "serial: uartps: Register own uart console and driver structures" [1/7] Revert "serial: uartps: Fix uartps_major handling" --- 2020-04-03 Michal Simek New
[5/7] Revert "serial: uartps: Change uart ID port allocation" [1/7] Revert "serial: uartps: Fix uartps_major handling" --- 2020-04-03 Michal Simek New
[3/7] Revert "serial: uartps: Fix error path when alloc failed" [1/7] Revert "serial: uartps: Fix uartps_major handling" --- 2020-04-03 Michal Simek New
[1/7] Revert "serial: uartps: Fix uartps_major handling" [1/7] Revert "serial: uartps: Fix uartps_major handling" --- 2020-04-03 Michal Simek New
tty: samsung_tty: 32-bit access for TX/RX hold registers tty: samsung_tty: 32-bit access for TX/RX hold registers --- 2020-04-01 Hyunki Koo New
[V3,5/8] spi: spi-geni-qcom: Add interconnect support [V3,1/8] interconnect: Add devm_of_icc_get() as exported API for users --- 2020-03-31 Akash Asthana New
[v2,tty-next,2/2] serial: 8250: Optimize irq enable after console write Untitled series #39260 --- 2020-03-27 Lukas Wunner New
[tty-next,1/2] serial: 8250: Fix rs485 delay after console write [tty-next,1/2] serial: 8250: Fix rs485 delay after console write --- 2020-03-26 Lukas Wunner New
[v2,7/7] serial: 8250_dw: add em485 support serial: 8250: Add rs485 emulation to 8250_dw --- 2020-03-25 Heiko Stuebner New
[v2,4/7] serial: 8250: Handle implementations not having TEMT interrupt using em485 serial: 8250: Add rs485 emulation to 8250_dw --- 2020-03-25 Heiko Stuebner New
[DON'T,APPLY,v2,3/7] serial: 8250: Support rs485 bus termination GPIO serial: 8250: Add rs485 emulation to 8250_dw --- 2020-03-25 Heiko Stuebner New
[2/2] gpiolib: Remove unused gpio_chip parameter from gpio_set_bias() gpiolib: gpio_set_config() cleanups --- 2020-03-25 Geert Uytterhoeven New
[2/3] tty: serial: fsl_lpuart: fix return value checking [1/3] tty: serial: fsl_lpuart: move dev_info_once() --- 2020-03-24 Michael Walle New
[1/3] tty: serial: fsl_lpuart: move dev_info_once() [1/3] tty: serial: fsl_lpuart: move dev_info_once() --- 2020-03-24 Michael Walle New
tty: serial: make SERIAL_SPRD depends on ARM or ARM64 tty: serial: make SERIAL_SPRD depends on ARM or ARM64 --- 2020-03-24 Chunyan Zhang New
[v3,2/2] vt: vt_ioctl: fix use-after-free in vt_in_use() Untitled series #39269 --- 2020-03-22 Eric Biggers New
serial: omap: drop unused dt-bindings header serial: omap: drop unused dt-bindings header --- 2020-03-21 Uwe Kleine-König New
[08/10] powerpc/fsl: Make serial ports compatible with ns16550a NS 8250 UART Device Tree improvements --- 2020-03-20 Lubomir Rintel New
[07/10] ARM: dts: tango4: Make /serial compatible with ns16550a NS 8250 UART Device Tree improvements --- 2020-03-20 Lubomir Rintel New
[05/10] ARM: dts: mmp*: Fix serial port names NS 8250 UART Device Tree improvements --- 2020-03-20 Lubomir Rintel New
[04/10] ARM: dts: mmp2-brownstone: Don't redeclare phandle references NS 8250 UART Device Tree improvements --- 2020-03-20 Lubomir Rintel New
[02/10] ARM: dts: pxa*: Fix serial port names NS 8250 UART Device Tree improvements --- 2020-03-20 Lubomir Rintel New
serial: 8250_omap: Fix sleeping function called from invalid context during probe serial: 8250_omap: Fix sleeping function called from invalid context during probe --- 2020-03-20 Peter Ujfalusi New
[6/6] serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs [1/6] serial: 8250: 8250_omap: Terminate DMA before pushing data on RX timeout --- 2020-03-19 Vignesh Raghavendra New
[3/6] serial: 8250: 8250_omap: Move locking out from __dma_rx_do_complete() [1/6] serial: 8250: 8250_omap: Terminate DMA before pushing data on RX timeout --- 2020-03-19 Vignesh Raghavendra New
[1/6] serial: 8250: 8250_omap: Terminate DMA before pushing data on RX timeout [1/6] serial: 8250: 8250_omap: Terminate DMA before pushing data on RX timeout --- 2020-03-19 Vignesh Raghavendra New
[1/2] serial: 8250_port: Don't service RX FIFO if throttled 8250_omap: Fix throttle callback --- 2020-03-19 Vignesh Raghavendra New
[v4,1/2] serial: uartps: Remove unconditional wait inside set_termios [v4,1/2] serial: uartps: Remove unconditional wait inside set_termios --- 2020-03-19 Shubhrajyoti Datta New
[v2,1/2] vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console vt: fix some vt_ioctl races --- 2020-03-18 Eric Biggers New
[6/7] serial: 8250_dw: add em485 support serial: 8250: Add rs485 emulation to 8250_dw --- 2020-03-18 Heiko Stuebner New
[4/7] serial: 8250: Start rs485 after registering port if rs485 is enabled in probe serial: 8250: Add rs485 emulation to 8250_dw --- 2020-03-18 Heiko Stuebner New
[1/7] serial: 8250: Make em485_rts_after_send() set mctrl according to rts state. serial: 8250: Add rs485 emulation to 8250_dw --- 2020-03-18 Heiko Stuebner New
[v3,2/2] serial: sprd: remove redundant sprd_port cleanup two fixes on sprd serial driver --- 2020-03-18 Chunyan Zhang New
[v2,1/2] serial: sprd: getting port index via serial alias only [v2,1/2] serial: sprd: getting port index via serial alias only --- 2020-03-18 Chunyan Zhang New
[28/28] dt-bindings: usb: Convert ehci-mv to json-schema DT: Improve validation for Marvell SoCs --- 2020-03-17 Lubomir Rintel New
[25/28] dt-bindings: rtc: Convert sa1100-rtc to json-schema DT: Improve validation for Marvell SoCs --- 2020-03-17 Lubomir Rintel New
[23/28] dt-bindings: interrupt-controller: Convert mrvl,intc to json-schema DT: Improve validation for Marvell SoCs --- 2020-03-17 Lubomir Rintel New
[21/28] dt-bindings: gpio: Convert mrvl-gpio to json-schema DT: Improve validation for Marvell SoCs --- 2020-03-17 Lubomir Rintel New
[19/28] dt-bindings: mmc: Convert sdhci-pxa to json-schema DT: Improve validation for Marvell SoCs --- 2020-03-17 Lubomir Rintel New
[18/28] dt-bindings: mmc: Fix node name in an example DT: Improve validation for Marvell SoCs --- 2020-03-17 Lubomir Rintel New
[15/28] dt-bindings: arm: mrvl: Add missing compatible strings DT: Improve validation for Marvell SoCs --- 2020-03-17 Lubomir Rintel New
[14/28] dt-bindings: arm: l2x0: Tauros 3 is PL310 compatible DT: Improve validation for Marvell SoCs --- 2020-03-17 Lubomir Rintel New
[11/28] ARM: dts: berlin*: Fix up the SDHCI node names DT: Improve validation for Marvell SoCs --- 2020-03-17 Lubomir Rintel New
[09/28] ARM: dts: mmp3: fix L2 cache controller node name DT: Improve validation for Marvell SoCs --- 2020-03-17 Lubomir Rintel New
[07/28] ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property DT: Improve validation for Marvell SoCs --- 2020-03-17 Lubomir Rintel New
[06/28] ARM: dts: pxa910: Fix the gpio interrupt cell number DT: Improve validation for Marvell SoCs --- 2020-03-17 Lubomir Rintel New
[03/28] ARM: dts: pxa168: Add missing address/size cells to i2c nodes DT: Improve validation for Marvell SoCs --- 2020-03-17 Lubomir Rintel New
[01/28] ARM: dts: kirkwood: Fix interrupt controller node name DT: Improve validation for Marvell SoCs --- 2020-03-17 Lubomir Rintel New
[2/3] serial: sprd: remove __init from sprd_console_setup a few fixes for sprd serial driver --- 2020-03-16 Chunyan Zhang New
[3/3] vt: indent switch-case in setterm_command properly [1/3] vt: use min() to limit intervals --- 2020-03-16 Jiri Slaby New
[1/3] vt: use min() to limit intervals [1/3] vt: use min() to limit intervals --- 2020-03-16 Jiri Slaby New
vt: selection, fix double lock introduced by a merge vt: selection, fix double lock introduced by a merge --- 2020-03-16 Jiri Slaby New
serial: sprd: Fix a dereference warning serial: sprd: Fix a dereference warning --- 2020-03-16 Lanqing Liu New
[1/2] tty: serial: qcom_geni_serial: No need to stop tx/rx on UART shutdown [1/2] tty: serial: qcom_geni_serial: No need to stop tx/rx on UART shutdown --- 2020-03-13 Doug Anderson New
« 1 2 ... 44 45 46 … 47 48 »