Message ID | 20181218080527.10801-9-manivannan.sadhasivam@linaro.org |
---|---|
State | Superseded |
Headers | show |
Series | [v6,01/11] dt-bindings: Add RDA Micro vendor prefix | expand |
On Tue, Dec 18, 2018 at 01:35:24PM +0530, Manivannan Sadhasivam wrote: > From: Andreas Färber <afaerber@suse.de> > > Add an initial binding for the UART in RDA Micro RDA8810PL SoC. > > Signed-off-by: Andreas Färber <afaerber@suse.de> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > --- > .../bindings/serial/rda,8810pl-uart.txt | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > create mode 100644 Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt Please add acks/reviewed-bys when posting new versions. Rob
On Tue, Dec 18, 2018 at 08:54:43AM -0600, Rob Herring wrote: > On Tue, Dec 18, 2018 at 01:35:24PM +0530, Manivannan Sadhasivam wrote: > > From: Andreas Färber <afaerber@suse.de> > > > > Add an initial binding for the UART in RDA Micro RDA8810PL SoC. > > > > Signed-off-by: Andreas Färber <afaerber@suse.de> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > > --- > > .../bindings/serial/rda,8810pl-uart.txt | 17 +++++++++++++++++ > > 1 file changed, 17 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt > > Please add acks/reviewed-bys when posting new versions. > Hi Rob, Sorry for that. I missed your Reviewed-by tag here. Will add it in the next iteration which I'm going to send to ARM SoC list. Regards, Mani > Rob
diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt new file mode 100644 index 000000000000..a08df97a69e6 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt @@ -0,0 +1,17 @@ +RDA Micro UART + +Required properties: +- compatible : "rda,8810pl-uart" for RDA8810PL SoCs. +- reg : Offset and length of the register set for the device. +- interrupts : Should contain UART interrupt. +- clocks : Phandle to the input clock. + + +Example: + + uart2: serial@20a90000 { + compatible = "rda,8810pl-uart"; + reg = <0x20a90000 0x1000>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>; + };