diff mbox series

[v7,06/11] ARM: dts: Add devicetree for OrangePi i96 board

Message ID 20181218150238.23010-7-manivannan.sadhasivam@linaro.org
State Accepted
Commit 7581d836bdbe2533e732f3bceb97a89d4f81de7b
Headers show
Series None | expand

Commit Message

Manivannan Sadhasivam Dec. 18, 2018, 3:02 p.m. UTC 
Add initial devicetree for Orange Pi i96 board from Xunlong. It
is one of the 96Boards IoT Edition board.

Signed-off-by: Andreas Färber <afaerber@suse.de>

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Acked-by: Arnd Bergmann <arnd@arndb.de>

---
 arch/arm/boot/dts/Makefile                   |  3 +-
 arch/arm/boot/dts/rda8810pl-orangepi-i96.dts | 50 ++++++++++++++++++++
 2 files changed, 52 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/rda8810pl-orangepi-i96.dts

-- 
2.17.1
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a0fdad8f10dd..cfb08ea33872 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -807,7 +807,8 @@  dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-msm8974-sony-xperia-honami.dtb \
 	qcom-mdm9615-wp8548-mangoh-green.dtb
 dtb-$(CONFIG_ARCH_RDA) += \
-	rda8810pl-orangepi-2g-iot.dtb
+	rda8810pl-orangepi-2g-iot.dtb \
+	rda8810pl-orangepi-i96.dtb
 dtb-$(CONFIG_ARCH_REALVIEW) += \
 	arm-realview-pb1176.dtb \
 	arm-realview-pb11mp.dtb \
diff --git a/arch/arm/boot/dts/rda8810pl-orangepi-i96.dts b/arch/arm/boot/dts/rda8810pl-orangepi-i96.dts
new file mode 100644
index 000000000000..728f76931b99
--- /dev/null
+++ b/arch/arm/boot/dts/rda8810pl-orangepi-i96.dts
@@ -0,0 +1,50 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ * Copyright (c) 2018 Manivannan Sadhasivam
+ */
+
+/dts-v1/;
+
+#include "rda8810pl.dtsi"
+
+/ {
+	compatible = "xunlong,orangepi-i96", "rda,8810pl";
+	model = "Orange Pi i96";
+
+	aliases {
+		serial0 = &uart2;
+		serial1 = &uart1;
+		serial2 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial2:921600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	uart_clk: uart-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <921600>;
+		#clock-cells = <0>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+	clocks = <&uart_clk>;
+};
+
+&uart2 {
+	status = "okay";
+	clocks = <&uart_clk>;
+};
+
+&uart3 {
+	status = "okay";
+	clocks = <&uart_clk>;
+};