| Message ID | 20210212163905.70171-2-krzk@kernel.org |
|---|---|
| State | New |
| Headers | show |
| Series | [1/2] dt-bindings: serial: samsung: add DMA properties | expand |
On Fri, Feb 12, 2021 at 05:39:05PM +0100, Krzysztof Kozlowski wrote: > Include the generic serial.yaml dtschema so the child node like > "bluetooh" will be properly matched: > > arch/arm/boot/dts/exynos4210-universal_c210.dt.yaml: > serial@13800000: 'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+' > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > --- > .../bindings/serial/samsung_uart.yaml | 26 ++++++++++++++++++- > 1 file changed, 25 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml > index 3e29b561223d..f4faf32ab00f 100644 > --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml > +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml > @@ -78,9 +78,11 @@ required: > - interrupts > - reg > > -additionalProperties: false > +unevaluatedProperties: false > > allOf: > + - $ref: /schemas/serial.yaml# > + > - if: > properties: > compatible: > @@ -134,3 +136,25 @@ examples: > <&clocks SCLK_UART>; > samsung,uart-fifosize = <16>; > }; > + > + - | > + #include <dt-bindings/clock/exynos4.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + serial@13800000 { > + compatible = "samsung,exynos4210-uart"; > + reg = <0x13800000 0x100>; > + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; > + clock-names = "uart", "clk_uart_baud0"; > + dmas = <&pdma0 15>, <&pdma0 16>; > + dma-names = "rx", "tx"; > + pinctrl-0 = <&uart0_data &uart0_fctl>; > + pinctrl-names = "default"; > + > + bluetooth { > + compatible = "brcm,bcm4330-bt"; Do we need a whole new example for this? I'm also trying to get rid compatibles without a schema so we can turn on warnings for that, but fortunately Linus is converting Broadcom BT. And looks like it should pass. Rob
On 05/03/2021 21:49, Rob Herring wrote: > On Fri, Feb 12, 2021 at 05:39:05PM +0100, Krzysztof Kozlowski wrote: >> Include the generic serial.yaml dtschema so the child node like >> "bluetooh" will be properly matched: >> >> arch/arm/boot/dts/exynos4210-universal_c210.dt.yaml: >> serial@13800000: 'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+' >> >> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> >> --- >> .../bindings/serial/samsung_uart.yaml | 26 ++++++++++++++++++- >> 1 file changed, 25 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml >> index 3e29b561223d..f4faf32ab00f 100644 >> --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml >> +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml >> @@ -78,9 +78,11 @@ required: >> - interrupts >> - reg >> >> -additionalProperties: false >> +unevaluatedProperties: false >> >> allOf: >> + - $ref: /schemas/serial.yaml# >> + >> - if: >> properties: >> compatible: >> @@ -134,3 +136,25 @@ examples: >> <&clocks SCLK_UART>; >> samsung,uart-fifosize = <16>; >> }; >> + >> + - | >> + #include <dt-bindings/clock/exynos4.h> >> + #include <dt-bindings/interrupt-controller/arm-gic.h> >> + >> + serial@13800000 { >> + compatible = "samsung,exynos4210-uart"; >> + reg = <0x13800000 0x100>; >> + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; >> + clock-names = "uart", "clk_uart_baud0"; >> + dmas = <&pdma0 15>, <&pdma0 16>; >> + dma-names = "rx", "tx"; >> + pinctrl-0 = <&uart0_data &uart0_fctl>; >> + pinctrl-names = "default"; >> + >> + bluetooth { >> + compatible = "brcm,bcm4330-bt"; > > Do we need a whole new example for this? No, we don't need it. I find examples useful but if you prefer to have them smaller, then I can skip it. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 3e29b561223d..f4faf32ab00f 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -78,9 +78,11 @@ required: - interrupts - reg -additionalProperties: false +unevaluatedProperties: false allOf: + - $ref: /schemas/serial.yaml# + - if: properties: compatible: @@ -134,3 +136,25 @@ examples: <&clocks SCLK_UART>; samsung,uart-fifosize = <16>; }; + + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + serial@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 15>, <&pdma0 16>; + dma-names = "rx", "tx"; + pinctrl-0 = <&uart0_data &uart0_fctl>; + pinctrl-names = "default"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; + pinctrl-names = "default"; + }; + };
Include the generic serial.yaml dtschema so the child node like "bluetooh" will be properly matched: arch/arm/boot/dts/exynos4210-universal_c210.dt.yaml: serial@13800000: 'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- .../bindings/serial/samsung_uart.yaml | 26 ++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-)