diff mbox series

[3/8] serial: Remove extern from func prototypes in headers

Message ID 20230309080923.11778-4-ilpo.jarvinen@linux.intel.com
State New
Headers show
Series serial: Core cleanups | expand

Commit Message

Ilpo Järvinen March 9, 2023, 8:09 a.m. UTC 
Remove unnecessary externs from function prototypes in serial_8250.h
and serial_core.h.

Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 include/linux/serial_8250.h | 41 ++++++++++++++++---------------------
 include/linux/serial_core.h | 13 ++++++------
 2 files changed, 24 insertions(+), 30 deletions(-)
diff mbox series

Patch

diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 19376bee9667..482ce4e66a6b 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -151,26 +151,22 @@  void serial8250_unregister_port(int line);
 void serial8250_suspend_port(int line);
 void serial8250_resume_port(int line);
 
-extern int early_serial_setup(struct uart_port *port);
-
-extern int early_serial8250_setup(struct earlycon_device *device,
-					 const char *options);
-extern void serial8250_update_uartclk(struct uart_port *port,
-				      unsigned int uartclk);
-extern void serial8250_do_set_termios(struct uart_port *port,
-		struct ktermios *termios, const struct ktermios *old);
-extern void serial8250_do_set_ldisc(struct uart_port *port,
-				    struct ktermios *termios);
-extern unsigned int serial8250_do_get_mctrl(struct uart_port *port);
-extern int serial8250_do_startup(struct uart_port *port);
-extern void serial8250_do_shutdown(struct uart_port *port);
-extern void serial8250_do_pm(struct uart_port *port, unsigned int state,
-			     unsigned int oldstate);
-extern void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl);
-extern void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud,
-				      unsigned int quot,
-				      unsigned int quot_frac);
-extern int fsl8250_handle_irq(struct uart_port *port);
+int early_serial_setup(struct uart_port *port);
+int early_serial8250_setup(struct earlycon_device *device, const char *options);
+
+void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk);
+void serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
+			       const struct ktermios *old);
+void serial8250_do_set_ldisc(struct uart_port *port, struct ktermios *termios);
+unsigned int serial8250_do_get_mctrl(struct uart_port *port);
+int serial8250_do_startup(struct uart_port *port);
+void serial8250_do_shutdown(struct uart_port *port);
+void serial8250_do_pm(struct uart_port *port, unsigned int state,
+		      unsigned int oldstate);
+void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl);
+void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud,
+			       unsigned int quot, unsigned int quot_frac);
+int fsl8250_handle_irq(struct uart_port *port);
 int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
 u16 serial8250_rx_chars(struct uart_8250_port *up, u16 lsr);
 void serial8250_read_char(struct uart_8250_port *up, u16 lsr);
@@ -183,9 +179,8 @@  void serial8250_console_write(struct uart_8250_port *up, const char *s,
 int serial8250_console_setup(struct uart_port *port, char *options, bool probe);
 int serial8250_console_exit(struct uart_port *port);
 
-extern void serial8250_set_isa_configurator(void (*v)
-					(int port, struct uart_port *up,
-						u32 *capabilities));
+void serial8250_set_isa_configurator(void (*v)(int port, struct uart_port *up,
+					       u32 *capabilities));
 
 #ifdef CONFIG_SERIAL_8250_RT288X
 unsigned int au_serial_in(struct uart_port *p, int offset);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 9e3e5e0d11b2..05d18a145b3a 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -812,9 +812,8 @@  extern const struct earlycon_id __earlycon_table_end[];
 
 #define EARLYCON_DECLARE(_name, fn)	OF_EARLYCON_DECLARE(_name, "", fn)
 
-extern int of_setup_earlycon(const struct earlycon_id *match,
-			     unsigned long node,
-			     const char *options);
+int of_setup_earlycon(const struct earlycon_id *match, unsigned long node,
+		      const char *options);
 
 #ifdef CONFIG_SERIAL_EARLYCON
 extern bool earlycon_acpi_spcr_enable __initdata;
@@ -897,11 +896,11 @@  static inline bool uart_softcts_mode(struct uart_port *uport)
  * The following are helper functions for the low level drivers.
  */
 
-extern void uart_handle_dcd_change(struct uart_port *uport, bool active);
-extern void uart_handle_cts_change(struct uart_port *uport, bool active);
+void uart_handle_dcd_change(struct uart_port *uport, bool active);
+void uart_handle_cts_change(struct uart_port *uport, bool active);
 
-extern void uart_insert_char(struct uart_port *port, unsigned int status,
-		 unsigned int overrun, unsigned int ch, unsigned int flag);
+void uart_insert_char(struct uart_port *port, unsigned int status,
+		      unsigned int overrun, unsigned int ch, unsigned int flag);
 
 void uart_xchar_out(struct uart_port *uport, int offset);