From patchwork Mon Feb 26 14:19:21 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andy Shevchenko X-Patchwork-Id: 777632 Received: from mgamail.intel.com (mgamail.intel.com [198.175.65.16]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C54191C6B9; Mon, 26 Feb 2024 14:25:30 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=198.175.65.16 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1708957532; cv=none; b=r7aGN3TWu4JPYAvoU5dTJ1eiidfMlCUMiSmUfQO6usuvM8zXnGLMjUWrCNKkfYM/5bBBpsRNqPLsPZuoWUjPF6zUXjGJLtCZoj8w2pmocGovHH/Mpbq0Oku00g34sPU/z/vnMtLV4px6RW/mKVu9UzklUE7Ws3Yyq5JQe24vHJk= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1708957532; c=relaxed/simple; bh=gldZ/Cbp9u0amwonRgNlffL/8B/cyCZTIV2zvUcgOTM=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=bzbtfRB2bremKl7HEON29kqEalbNQTuskxdFA5K1Cdt3eXQZ7B6bf00AfQMjevQ8Tlokw4zSFhG6yQT1YjD3YwjlRcM90DpQJuEuFrXzAchTOZP+CmGK0JdcwbJwXeyi8Qfxm+S4S5s4dSj1r3zdx3XiAaudVz2PAvl5Kc5XLak= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.intel.com; spf=none smtp.mailfrom=linux.intel.com; dkim=pass (2048-bit key) header.d=intel.com header.i=@intel.com header.b=WEfUqRdq; arc=none smtp.client-ip=198.175.65.16 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.intel.com Authentication-Results: smtp.subspace.kernel.org; spf=none smtp.mailfrom=linux.intel.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=intel.com header.i=@intel.com header.b="WEfUqRdq" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1708957531; x=1740493531; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=gldZ/Cbp9u0amwonRgNlffL/8B/cyCZTIV2zvUcgOTM=; b=WEfUqRdq7oK6AT16xaxmaNH3d0ZGYGQLJhc3Qc8CJEXM5kvs1BeU2Pkp JVD67kH1Pr+Lec8O5MHEYqkIk/ZxfDAwFA81wumS846Ue+rPYTfrc5/1J ODAAHbQTwTNO5VS4vSWDmlGteqAgkmvO/IA4UHvADWIYW1/veleC5d2mx E6Ret8myuftoljYO0XF4DOp304zQjdfgSCY/EjlBby39nfeBz+d20rd/S wUy+O8M/x/LG1EljR2W8hS6bMOjXuMGoAvhBaAKn7TMl7QIpSR59cyVpP CtpMbQPXrdCQEHFeO0SjiM/YPPWXq4/9Vve/OPSaq5y1gqlvcc5WkCkHM g==; X-IronPort-AV: E=McAfee;i="6600,9927,10995"; a="3375176" X-IronPort-AV: E=Sophos;i="6.06,185,1705392000"; d="scan'208";a="3375176" Received: from fmsmga001.fm.intel.com ([10.253.24.23]) by orvoesa108.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 26 Feb 2024 06:25:30 -0800 X-ExtLoop1: 1 X-IronPort-AV: E=McAfee;i="6600,9927,10995"; a="937030142" X-IronPort-AV: E=Sophos;i="6.06,185,1705392000"; d="scan'208";a="937030142" Received: from black.fi.intel.com ([10.237.72.28]) by fmsmga001.fm.intel.com with ESMTP; 26 Feb 2024 06:25:23 -0800 Received: by black.fi.intel.com (Postfix, from userid 1003) id 41A3C4C5; Mon, 26 Feb 2024 16:25:16 +0200 (EET) From: Andy Shevchenko To: Greg Kroah-Hartman , Andy Shevchenko , Thomas Gleixner , linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, linux-rpi-kernel@lists.infradead.org, linux-mips@vger.kernel.org, linux-tegra@vger.kernel.org Cc: Jiri Slaby , Joel Stanley , Andrew Jeffery , Florian Fainelli , Broadcom internal kernel review list , Ray Jui , Scott Branden , Al Cooper , =?utf-8?q?Ilpo_J=C3=A4rvinen?= , Paul Cercueil , Vladimir Zapolskiy , Thierry Reding , Jonathan Hunter , Kunihiko Hayashi , Masami Hiramatsu Subject: [PATCH v2 05/14] serial: 8250_bcm2835aux: Switch to use uart_read_port_properties() Date: Mon, 26 Feb 2024 16:19:21 +0200 Message-ID: <20240226142514.1485246-6-andriy.shevchenko@linux.intel.com> X-Mailer: git-send-email 2.43.0.rc1.1.gbec44491f096 In-Reply-To: <20240226142514.1485246-1-andriy.shevchenko@linux.intel.com> References: <20240226142514.1485246-1-andriy.shevchenko@linux.intel.com> Precedence: bulk X-Mailing-List: linux-serial@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Since we have now a common helper to read port properties use it instead of sparse home grown solution. Signed-off-by: Andy Shevchenko --- drivers/tty/serial/8250/8250_bcm2835aux.c | 92 +++++++++++------------ 1 file changed, 42 insertions(+), 50 deletions(-) diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c index beac6b340ace..69c3c5ca77f7 100644 --- a/drivers/tty/serial/8250/8250_bcm2835aux.c +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c @@ -45,10 +45,6 @@ struct bcm2835aux_data { u32 cntl; }; -struct bcm2835_aux_serial_driver_data { - resource_size_t offset; -}; - static void bcm2835aux_rs485_start_tx(struct uart_8250_port *up) { if (!(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) { @@ -85,10 +81,9 @@ static void bcm2835aux_rs485_stop_tx(struct uart_8250_port *up) static int bcm2835aux_serial_probe(struct platform_device *pdev) { - const struct bcm2835_aux_serial_driver_data *bcm_data; + const struct software_node *bcm2835_swnode; struct uart_8250_port up = { }; struct bcm2835aux_data *data; - resource_size_t offset = 0; struct resource *res; unsigned int uartclk; int ret; @@ -101,12 +96,8 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) /* initialize data */ up.capabilities = UART_CAP_FIFO | UART_CAP_MINI; up.port.dev = &pdev->dev; - up.port.regshift = 2; up.port.type = PORT_16550; - up.port.iotype = UPIO_MEM; - up.port.fifosize = 8; - up.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE | - UPF_SKIP_TEST | UPF_IOREMAP; + up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SKIP_TEST | UPF_IOREMAP; up.port.rs485_config = serial8250_em485_config; up.port.rs485_supported = serial8250_em485_supported; up.rs485_start_tx = bcm2835aux_rs485_start_tx; @@ -122,12 +113,6 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) if (IS_ERR(data->clk)) return dev_err_probe(&pdev->dev, PTR_ERR(data->clk), "could not get clk\n"); - /* get the interrupt */ - ret = platform_get_irq(pdev, 0); - if (ret < 0) - return ret; - up.port.irq = ret; - /* map the main registers */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -135,52 +120,40 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) return -EINVAL; } - bcm_data = device_get_match_data(&pdev->dev); + up.port.mapbase = res->start; + up.port.mapsize = resource_size(res); - /* Some UEFI implementations (e.g. tianocore/edk2 for the Raspberry Pi) - * describe the miniuart with a base address that encompasses the auxiliary - * registers shared between the miniuart and spi. - * - * This is due to historical reasons, see discussion here : - * https://edk2.groups.io/g/devel/topic/87501357#84349 - * - * We need to add the offset between the miniuart and auxiliary - * registers to get the real miniuart base address. - */ - if (bcm_data) - offset = bcm_data->offset; + bcm2835_swnode = device_get_match_data(&pdev->dev); + if (bcm2835_swnode) { + ret = device_add_software_node(&pdev->dev, bcm2835_swnode); + if (ret) + return ret; + } - up.port.mapbase = res->start + offset; - up.port.mapsize = resource_size(res) - offset; + ret = uart_read_port_properties(&up.port, true); + if (ret) + goto rm_swnode; - /* Check for a fixed line number */ - ret = of_alias_get_id(pdev->dev.of_node, "serial"); - if (ret >= 0) - up.port.line = ret; + up.port.regshift = 2; + up.port.fifosize = 8; /* enable the clock as a last step */ ret = clk_prepare_enable(data->clk); if (ret) { - dev_err(&pdev->dev, "unable to enable uart clock - %d\n", - ret); - return ret; + dev_err_probe(&pdev->dev, ret, "unable to enable uart clock\n"); + goto rm_swnode; } uartclk = clk_get_rate(data->clk); - if (!uartclk) { - ret = device_property_read_u32(&pdev->dev, "clock-frequency", &uartclk); - if (ret) { - dev_err_probe(&pdev->dev, ret, "could not get clk rate\n"); - goto dis_clk; - } - } + if (uartclk) + up.port.uartclk = uartclk; /* the HW-clock divider for bcm2835aux is 8, * but 8250 expects a divider of 16, * so we have to multiply the actual clock by 2 * to get identical baudrates. */ - up.port.uartclk = uartclk * 2; + up.port.uartclk *= 2; /* register the port */ ret = serial8250_register_8250_port(&up); @@ -194,6 +167,8 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) dis_clk: clk_disable_unprepare(data->clk); +rm_swnode: + device_remove_software_node(&pdev->dev); return ret; } @@ -203,10 +178,27 @@ static void bcm2835aux_serial_remove(struct platform_device *pdev) serial8250_unregister_port(data->line); clk_disable_unprepare(data->clk); + device_remove_software_node(&pdev->dev); } -static const struct bcm2835_aux_serial_driver_data bcm2835_acpi_data = { - .offset = 0x40, +/* + * Some UEFI implementations (e.g. tianocore/edk2 for the Raspberry Pi) + * describe the miniuart with a base address that encompasses the auxiliary + * registers shared between the miniuart and spi. + * + * This is due to historical reasons, see discussion here: + * https://edk2.groups.io/g/devel/topic/87501357#84349 + * + * We need to add the offset between the miniuart and auxiliary registers + * to get the real miniuart base address. + */ +static const struct property_entry bcm2835_acpi_properties[] = { + PROPERTY_ENTRY_U32("reg-offset", 0x40), + { } +}; + +static const struct software_node bcm2835_acpi_node = { + .properties = bcm2835_acpi_properties, }; static const struct of_device_id bcm2835aux_serial_match[] = { @@ -216,7 +208,7 @@ static const struct of_device_id bcm2835aux_serial_match[] = { MODULE_DEVICE_TABLE(of, bcm2835aux_serial_match); static const struct acpi_device_id bcm2835aux_serial_acpi_match[] = { - { "BCM2836", (kernel_ulong_t)&bcm2835_acpi_data }, + { "BCM2836", (kernel_ulong_t)&bcm2835_acpi_node }, { } }; MODULE_DEVICE_TABLE(acpi, bcm2835aux_serial_acpi_match);