From patchwork Tue Apr 2 17:43:51 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hugo Villeneuve X-Patchwork-Id: 785362 Received: from mail.hugovil.com (mail.hugovil.com [162.243.120.170]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 4A5F315AADA; Tue, 2 Apr 2024 17:45:07 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=162.243.120.170 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1712079910; cv=none; b=tRDqPZPKsoVNZq35kj1dfePwoGQ3rjnh7ekJOkIEkhCtSqiRHpNpGD+/5QSLz3U5vOlMU1SYJVZuY5rkJ03M8/Q6ol2RQYJ8HfXkuiiR2TST0eF52zZeGbMf1z/jPjUEjYPKFTUYdvtifN+VVVlzYq13Whn3pKqenfVnwomwiFA= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1712079910; c=relaxed/simple; bh=XjOl+NEeI+YBt+6qV52La2kZGVw3PubDdRzpv9BR0H4=; h=From:To:Cc:Date:Message-Id:In-Reply-To:References:MIME-Version: Subject; b=SskWzSkWOUrIjJh6fqpMLAd6DJnkuOvKbTGW1onfOUmKSdncV1zPdCXuUUtD2qB0LoZR8BupWqYRrnn7YJUHopSjIGnY4nOZ8v5XbdCLu77UC/EeQZeHfAdedH0hS0TWVv8Vk3z3WDstl7vABKVLPNhWpeyA3UwntHmEQ7NVkuk= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=hugovil.com; spf=pass smtp.mailfrom=hugovil.com; dkim=pass (1024-bit key) header.d=hugovil.com header.i=@hugovil.com header.b=rhWA6EuB; arc=none smtp.client-ip=162.243.120.170 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=hugovil.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=hugovil.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=hugovil.com header.i=@hugovil.com header.b="rhWA6EuB" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=hugovil.com ; s=x; h=Subject:Content-Transfer-Encoding:MIME-Version:Message-Id:Date:Cc:To :From:subject:date:message-id:reply-to; bh=hHjIZYJnCYeUTDrqPJ1OZ1qOf8Cpq0hFsGLajs/G/08=; b=rhWA6EuBMD4bzvYDM1zQbaFSiG zQEuTCj9TrjdJ9NvQIfBy6x7W4LAN0JikOdoMsmcRToibnnaXVgkhj8HkF1Vk9j0fl1CvvSMHk7MK Z195uQAfAOlc3vPKU7tiWQv4XS5nnbUVODPMMGF9Y4A3TwiBRvXTyTiYQZG+QM0TvTAc=; Received: from modemcable168.174-80-70.mc.videotron.ca ([70.80.174.168]:56268 helo=pettiford.lan) by mail.hugovil.com with esmtpa (Exim 4.92) (envelope-from ) id 1rriC1-0008FF-Mp; Tue, 02 Apr 2024 13:45:06 -0400 From: Hugo Villeneuve To: gregkh@linuxfoundation.org, jirislaby@kernel.org Cc: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org, hugo@hugovil.com, andy.shevchenko@gmail.com, Hugo Villeneuve Date: Tue, 2 Apr 2024 13:43:51 -0400 Message-Id: <20240402174353.256627-4-hugo@hugovil.com> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20240402174353.256627-1-hugo@hugovil.com> References: <20240402174353.256627-1-hugo@hugovil.com> Precedence: bulk X-Mailing-List: linux-serial@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-SA-Exim-Connect-IP: 70.80.174.168 X-SA-Exim-Mail-From: hugo@hugovil.com X-Spam-Level: X-Spam-Report: * -1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP Subject: [PATCH v3 3/5] serial: sc16is7xx: split into core and I2C/SPI parts (core) X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on mail.hugovil.com) From: Hugo Villeneuve Split the common code from sc16is7xx driver and move the I2C and SPI bus parts into interface-specific source files. sc16is7xx becomes the core functions which can support multiple bus interfaces like I2C and SPI. No functional change intended. Suggested-by: Andy Shevchenko Signed-off-by: Hugo Villeneuve --- drivers/tty/serial/Kconfig | 19 +-- drivers/tty/serial/Makefile | 4 +- drivers/tty/serial/sc16is7xx.c | 223 +++++------------------------ drivers/tty/serial/sc16is7xx.h | 41 ++++++ drivers/tty/serial/sc16is7xx_i2c.c | 71 +++++++++ drivers/tty/serial/sc16is7xx_spi.c | 94 ++++++++++++ 6 files changed, 248 insertions(+), 204 deletions(-) create mode 100644 drivers/tty/serial/sc16is7xx.h create mode 100644 drivers/tty/serial/sc16is7xx_i2c.c create mode 100644 drivers/tty/serial/sc16is7xx_spi.c diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 48087e34ff527..40343fdf78964 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1020,13 +1020,10 @@ config SERIAL_SCCNXP_CONSOLE help Support for console on SCCNXP serial ports. -config SERIAL_SC16IS7XX_CORE - tristate - config SERIAL_SC16IS7XX tristate "SC16IS7xx serial support" select SERIAL_CORE - depends on (SPI_MASTER && !I2C) || I2C + depends on SPI_MASTER || I2C help Core driver for NXP SC16IS7xx serial ports. Supported ICs are: @@ -1042,22 +1039,18 @@ config SERIAL_SC16IS7XX drivers below. config SERIAL_SC16IS7XX_I2C - bool "SC16IS7xx for I2C interface" + tristate "SC16IS7xx for I2C interface" depends on SERIAL_SC16IS7XX depends on I2C - select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX - select REGMAP_I2C if I2C - default y + select REGMAP_I2C help - Enable SC16IS7xx driver on I2C bus, - enabled by default to support oldconfig. + Enable SC16IS7xx driver on I2C bus. config SERIAL_SC16IS7XX_SPI - bool "SC16IS7xx for spi interface" + tristate "SC16IS7xx for SPI interface" depends on SERIAL_SC16IS7XX depends on SPI_MASTER - select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX - select REGMAP_SPI if SPI_MASTER + select REGMAP_SPI help Enable SC16IS7xx driver on SPI bus. diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index b25e9b54a6609..9f51b933915a5 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -75,7 +75,9 @@ obj-$(CONFIG_SERIAL_SA1100) += sa1100.o obj-$(CONFIG_SERIAL_SAMSUNG) += samsung_tty.o obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o -obj-$(CONFIG_SERIAL_SC16IS7XX_CORE) += sc16is7xx.o +obj-$(CONFIG_SERIAL_SC16IS7XX_SPI) += sc16is7xx_spi.o +obj-$(CONFIG_SERIAL_SC16IS7XX_I2C) += sc16is7xx_i2c.o +obj-$(CONFIG_SERIAL_SC16IS7XX) += sc16is7xx.o obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o obj-$(CONFIG_SERIAL_SIFIVE) += sifive.o obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index eec6fa8b0da79..05e5cbc0f9e8b 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1,19 +1,19 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * SC16IS7xx tty serial driver - Copyright (C) 2014 GridPoint - * Author: Jon Ringle + * SC16IS7xx tty serial driver - common code * - * Based on max310x.c, by Alexander Shiyan + * Copyright (C) 2014 GridPoint + * Author: Jon Ringle + * Based on max310x.c, by Alexander Shiyan */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include #include #include +#include #include -#include +#include #include #include #include @@ -22,14 +22,13 @@ #include #include #include -#include #include #include #include -#define SC16IS7XX_NAME "sc16is7xx" +#include "sc16is7xx.h" + #define SC16IS7XX_MAX_DEVS 8 -#define SC16IS7XX_MAX_PORTS 2 /* Maximum number of UART ports per IC. */ /* SC16IS7XX register definitions */ #define SC16IS7XX_RHR_REG (0x00) /* RX FIFO */ @@ -302,16 +301,9 @@ /* Misc definitions */ -#define SC16IS7XX_SPI_READ_BIT BIT(7) #define SC16IS7XX_FIFO_SIZE (64) #define SC16IS7XX_GPIOS_PER_BANK 4 -struct sc16is7xx_devtype { - char name[10]; - int nr_gpio; - int nr_uart; -}; - #define SC16IS7XX_RECONF_MD (1 << 0) #define SC16IS7XX_RECONF_IER (1 << 1) #define SC16IS7XX_RECONF_RS485 (1 << 2) @@ -492,35 +484,40 @@ static void sc16is7xx_stop_rx(struct uart_port *port) sc16is7xx_ier_clear(port, SC16IS7XX_IER_RDI_BIT); } -static const struct sc16is7xx_devtype sc16is74x_devtype = { +const struct sc16is7xx_devtype sc16is74x_devtype = { .name = "SC16IS74X", .nr_gpio = 0, .nr_uart = 1, }; +EXPORT_SYMBOL_GPL(sc16is74x_devtype); -static const struct sc16is7xx_devtype sc16is750_devtype = { +const struct sc16is7xx_devtype sc16is750_devtype = { .name = "SC16IS750", .nr_gpio = 8, .nr_uart = 1, }; +EXPORT_SYMBOL_GPL(sc16is750_devtype); -static const struct sc16is7xx_devtype sc16is752_devtype = { +const struct sc16is7xx_devtype sc16is752_devtype = { .name = "SC16IS752", .nr_gpio = 8, .nr_uart = 2, }; +EXPORT_SYMBOL_GPL(sc16is752_devtype); -static const struct sc16is7xx_devtype sc16is760_devtype = { +const struct sc16is7xx_devtype sc16is760_devtype = { .name = "SC16IS760", .nr_gpio = 8, .nr_uart = 1, }; +EXPORT_SYMBOL_GPL(sc16is760_devtype); -static const struct sc16is7xx_devtype sc16is762_devtype = { +const struct sc16is7xx_devtype sc16is762_devtype = { .name = "SC16IS762", .nr_gpio = 8, .nr_uart = 2, }; +EXPORT_SYMBOL_GPL(sc16is762_devtype); static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg) { @@ -1463,9 +1460,8 @@ static const struct serial_rs485 sc16is7xx_rs485_supported = { .delay_rts_after_send = 1, /* Not supported but keep returning -EINVAL */ }; -static int sc16is7xx_probe(struct device *dev, - const struct sc16is7xx_devtype *devtype, - struct regmap *regmaps[], int irq) +int sc16is7xx_probe(struct device *dev, const struct sc16is7xx_devtype *devtype, + struct regmap *regmaps[], int irq) { unsigned long freq = 0, *pfreq = dev_get_platdata(dev); unsigned int val; @@ -1657,8 +1653,9 @@ static int sc16is7xx_probe(struct device *dev, return ret; } +EXPORT_SYMBOL_GPL(sc16is7xx_probe); -static void sc16is7xx_remove(struct device *dev) +void sc16is7xx_remove(struct device *dev) { struct sc16is7xx_port *s = dev_get_drvdata(dev); int i; @@ -1680,8 +1677,9 @@ static void sc16is7xx_remove(struct device *dev) clk_disable_unprepare(s->clk); } +EXPORT_SYMBOL_GPL(sc16is7xx_remove); -static const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = { +const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = { { .compatible = "nxp,sc16is740", .data = &sc16is74x_devtype, }, { .compatible = "nxp,sc16is741", .data = &sc16is74x_devtype, }, { .compatible = "nxp,sc16is750", .data = &sc16is750_devtype, }, @@ -1690,9 +1688,10 @@ static const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = { { .compatible = "nxp,sc16is762", .data = &sc16is762_devtype, }, { } }; +EXPORT_SYMBOL_GPL(sc16is7xx_dt_ids); MODULE_DEVICE_TABLE(of, sc16is7xx_dt_ids); -static struct regmap_config regcfg = { +struct regmap_config sc16is7xx_regcfg = { .reg_bits = 5, .pad_bits = 3, .val_bits = 8, @@ -1705,8 +1704,9 @@ static struct regmap_config regcfg = { .max_raw_write = SC16IS7XX_FIFO_SIZE, .max_register = SC16IS7XX_EFCR_REG, }; +EXPORT_SYMBOL_GPL(sc16is7xx_regcfg); -static const char *sc16is7xx_regmap_name(u8 port_id) +const char *sc16is7xx_regmap_name(u8 port_id) { switch (port_id) { case 0: return "port0"; @@ -1716,184 +1716,27 @@ static const char *sc16is7xx_regmap_name(u8 port_id) return NULL; } } +EXPORT_SYMBOL_GPL(sc16is7xx_regmap_name); -static unsigned int sc16is7xx_regmap_port_mask(unsigned int port_id) +unsigned int sc16is7xx_regmap_port_mask(unsigned int port_id) { /* CH1,CH0 are at bits 2:1. */ return port_id << 1; } - -#ifdef CONFIG_SERIAL_SC16IS7XX_SPI -static int sc16is7xx_spi_probe(struct spi_device *spi) -{ - const struct sc16is7xx_devtype *devtype; - struct regmap *regmaps[SC16IS7XX_MAX_PORTS]; - unsigned int i; - int ret; - - /* Setup SPI bus */ - spi->bits_per_word = 8; - /* For all variants, only mode 0 is supported */ - if ((spi->mode & SPI_MODE_X_MASK) != SPI_MODE_0) - return dev_err_probe(&spi->dev, -EINVAL, "Unsupported SPI mode\n"); - - spi->mode = spi->mode ? : SPI_MODE_0; - spi->max_speed_hz = spi->max_speed_hz ? : 4 * HZ_PER_MHZ; - ret = spi_setup(spi); - if (ret) - return ret; - - devtype = spi_get_device_match_data(spi); - if (!devtype) - return dev_err_probe(&spi->dev, -ENODEV, "Failed to match device\n"); - - for (i = 0; i < devtype->nr_uart; i++) { - regcfg.name = sc16is7xx_regmap_name(i); - /* - * If read_flag_mask is 0, the regmap code sets it to a default - * of 0x80. Since we specify our own mask, we must add the READ - * bit ourselves: - */ - regcfg.read_flag_mask = sc16is7xx_regmap_port_mask(i) | - SC16IS7XX_SPI_READ_BIT; - regcfg.write_flag_mask = sc16is7xx_regmap_port_mask(i); - regmaps[i] = devm_regmap_init_spi(spi, ®cfg); - } - - return sc16is7xx_probe(&spi->dev, devtype, regmaps, spi->irq); -} - -static void sc16is7xx_spi_remove(struct spi_device *spi) -{ - sc16is7xx_remove(&spi->dev); -} - -static const struct spi_device_id sc16is7xx_spi_id_table[] = { - { "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, }, - { "sc16is740", (kernel_ulong_t)&sc16is74x_devtype, }, - { "sc16is741", (kernel_ulong_t)&sc16is74x_devtype, }, - { "sc16is750", (kernel_ulong_t)&sc16is750_devtype, }, - { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, }, - { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, }, - { "sc16is762", (kernel_ulong_t)&sc16is762_devtype, }, - { } -}; - -MODULE_DEVICE_TABLE(spi, sc16is7xx_spi_id_table); - -static struct spi_driver sc16is7xx_spi_uart_driver = { - .driver = { - .name = SC16IS7XX_NAME, - .of_match_table = sc16is7xx_dt_ids, - }, - .probe = sc16is7xx_spi_probe, - .remove = sc16is7xx_spi_remove, - .id_table = sc16is7xx_spi_id_table, -}; -#endif - -#ifdef CONFIG_SERIAL_SC16IS7XX_I2C -static int sc16is7xx_i2c_probe(struct i2c_client *i2c) -{ - const struct sc16is7xx_devtype *devtype; - struct regmap *regmaps[SC16IS7XX_MAX_PORTS]; - unsigned int i; - - devtype = i2c_get_match_data(i2c); - if (!devtype) - return dev_err_probe(&i2c->dev, -ENODEV, "Failed to match device\n"); - - for (i = 0; i < devtype->nr_uart; i++) { - regcfg.name = sc16is7xx_regmap_name(i); - regcfg.read_flag_mask = sc16is7xx_regmap_port_mask(i); - regcfg.write_flag_mask = sc16is7xx_regmap_port_mask(i); - regmaps[i] = devm_regmap_init_i2c(i2c, ®cfg); - } - - return sc16is7xx_probe(&i2c->dev, devtype, regmaps, i2c->irq); -} - -static void sc16is7xx_i2c_remove(struct i2c_client *client) -{ - sc16is7xx_remove(&client->dev); -} - -static const struct i2c_device_id sc16is7xx_i2c_id_table[] = { - { "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, }, - { "sc16is740", (kernel_ulong_t)&sc16is74x_devtype, }, - { "sc16is741", (kernel_ulong_t)&sc16is74x_devtype, }, - { "sc16is750", (kernel_ulong_t)&sc16is750_devtype, }, - { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, }, - { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, }, - { "sc16is762", (kernel_ulong_t)&sc16is762_devtype, }, - { } -}; -MODULE_DEVICE_TABLE(i2c, sc16is7xx_i2c_id_table); - -static struct i2c_driver sc16is7xx_i2c_uart_driver = { - .driver = { - .name = SC16IS7XX_NAME, - .of_match_table = sc16is7xx_dt_ids, - }, - .probe = sc16is7xx_i2c_probe, - .remove = sc16is7xx_i2c_remove, - .id_table = sc16is7xx_i2c_id_table, -}; - -#endif +EXPORT_SYMBOL_GPL(sc16is7xx_regmap_port_mask); static int __init sc16is7xx_init(void) { - int ret; - - ret = uart_register_driver(&sc16is7xx_uart); - if (ret) { - pr_err("Registering UART driver failed\n"); - return ret; - } - -#ifdef CONFIG_SERIAL_SC16IS7XX_I2C - ret = i2c_add_driver(&sc16is7xx_i2c_uart_driver); - if (ret < 0) { - pr_err("failed to init sc16is7xx i2c --> %d\n", ret); - goto err_i2c; - } -#endif - -#ifdef CONFIG_SERIAL_SC16IS7XX_SPI - ret = spi_register_driver(&sc16is7xx_spi_uart_driver); - if (ret < 0) { - pr_err("failed to init sc16is7xx spi --> %d\n", ret); - goto err_spi; - } -#endif - return ret; - -#ifdef CONFIG_SERIAL_SC16IS7XX_SPI -err_spi: -#endif -#ifdef CONFIG_SERIAL_SC16IS7XX_I2C - i2c_del_driver(&sc16is7xx_i2c_uart_driver); -err_i2c: -#endif - uart_unregister_driver(&sc16is7xx_uart); - return ret; + return uart_register_driver(&sc16is7xx_uart); } module_init(sc16is7xx_init); static void __exit sc16is7xx_exit(void) { -#ifdef CONFIG_SERIAL_SC16IS7XX_I2C - i2c_del_driver(&sc16is7xx_i2c_uart_driver); -#endif - -#ifdef CONFIG_SERIAL_SC16IS7XX_SPI - spi_unregister_driver(&sc16is7xx_spi_uart_driver); -#endif uart_unregister_driver(&sc16is7xx_uart); } module_exit(sc16is7xx_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Jon Ringle "); -MODULE_DESCRIPTION("SC16IS7XX serial driver"); +MODULE_DESCRIPTION("SC16IS7xx tty serial core driver"); diff --git a/drivers/tty/serial/sc16is7xx.h b/drivers/tty/serial/sc16is7xx.h new file mode 100644 index 0000000000000..410f34b1005c3 --- /dev/null +++ b/drivers/tty/serial/sc16is7xx.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* SC16IS7xx SPI/I2C tty serial driver */ + +#ifndef _SC16IS7XX_H_ +#define _SC16IS7XX_H_ + +#include +#include +#include +#include +#include + +#define SC16IS7XX_NAME "sc16is7xx" +#define SC16IS7XX_MAX_PORTS 2 /* Maximum number of UART ports per IC. */ + +struct sc16is7xx_devtype { + char name[10]; + int nr_gpio; + int nr_uart; +}; + +extern struct regmap_config sc16is7xx_regcfg; + +extern const struct of_device_id __maybe_unused sc16is7xx_dt_ids[]; + +extern const struct sc16is7xx_devtype sc16is74x_devtype; +extern const struct sc16is7xx_devtype sc16is750_devtype; +extern const struct sc16is7xx_devtype sc16is752_devtype; +extern const struct sc16is7xx_devtype sc16is760_devtype; +extern const struct sc16is7xx_devtype sc16is762_devtype; + +const char *sc16is7xx_regmap_name(u8 port_id); + +unsigned int sc16is7xx_regmap_port_mask(unsigned int port_id); + +int sc16is7xx_probe(struct device *dev, const struct sc16is7xx_devtype *devtype, + struct regmap *regmaps[], int irq); + +void sc16is7xx_remove(struct device *dev); + +#endif /* _SC16IS7XX_H_ */ diff --git a/drivers/tty/serial/sc16is7xx_i2c.c b/drivers/tty/serial/sc16is7xx_i2c.c new file mode 100644 index 0000000000000..70f0c329cc133 --- /dev/null +++ b/drivers/tty/serial/sc16is7xx_i2c.c @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* SC16IS7xx I2C interface driver */ + +#include +#include +#include +#include + +#include "sc16is7xx.h" + +static int sc16is7xx_i2c_probe(struct i2c_client *i2c) +{ + const struct sc16is7xx_devtype *devtype; + struct regmap *regmaps[SC16IS7XX_MAX_PORTS]; + unsigned int i; + + devtype = i2c_get_match_data(i2c); + if (!devtype) + return dev_err_probe(&i2c->dev, -ENODEV, "Failed to match device\n"); + + for (i = 0; i < devtype->nr_uart; i++) { + sc16is7xx_regcfg.name = sc16is7xx_regmap_name(i); + sc16is7xx_regcfg.read_flag_mask = sc16is7xx_regmap_port_mask(i); + sc16is7xx_regcfg.write_flag_mask = sc16is7xx_regmap_port_mask(i); + regmaps[i] = devm_regmap_init_i2c(i2c, &sc16is7xx_regcfg); + } + + return sc16is7xx_probe(&i2c->dev, devtype, regmaps, i2c->irq); +} + +static void sc16is7xx_i2c_remove(struct i2c_client *client) +{ + sc16is7xx_remove(&client->dev); +} + +static const struct i2c_device_id sc16is7xx_i2c_id_table[] = { + { "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is740", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is741", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is750", (kernel_ulong_t)&sc16is750_devtype, }, + { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, }, + { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, }, + { "sc16is762", (kernel_ulong_t)&sc16is762_devtype, }, + { } +}; +MODULE_DEVICE_TABLE(i2c, sc16is7xx_i2c_id_table); + +static struct i2c_driver sc16is7xx_i2c_driver = { + .driver = { + .name = SC16IS7XX_NAME, + .of_match_table = sc16is7xx_dt_ids, + }, + .probe = sc16is7xx_i2c_probe, + .remove = sc16is7xx_i2c_remove, + .id_table = sc16is7xx_i2c_id_table, +}; + +static int __init sc16is7xx_i2c_init(void) +{ + return i2c_add_driver(&sc16is7xx_i2c_driver); +} +module_init(sc16is7xx_i2c_init); + +static void __exit sc16is7xx_i2c_exit(void) +{ + i2c_del_driver(&sc16is7xx_i2c_driver); +} +module_exit(sc16is7xx_i2c_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SC16IS7xx I2C interface driver"); diff --git a/drivers/tty/serial/sc16is7xx_spi.c b/drivers/tty/serial/sc16is7xx_spi.c new file mode 100644 index 0000000000000..3942fc1b7455a --- /dev/null +++ b/drivers/tty/serial/sc16is7xx_spi.c @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* SC16IS7xx SPI interface driver */ + +#include +#include +#include +#include +#include + +#include "sc16is7xx.h" + +/* SPI definitions */ +#define SC16IS7XX_SPI_READ_BIT BIT(7) + +static int sc16is7xx_spi_probe(struct spi_device *spi) +{ + const struct sc16is7xx_devtype *devtype; + struct regmap *regmaps[SC16IS7XX_MAX_PORTS]; + unsigned int i; + int ret; + + /* Setup SPI bus */ + spi->bits_per_word = 8; + /* For all variants, only mode 0 is supported */ + if ((spi->mode & SPI_MODE_X_MASK) != SPI_MODE_0) + return dev_err_probe(&spi->dev, -EINVAL, "Unsupported SPI mode\n"); + + spi->mode = spi->mode ? : SPI_MODE_0; + spi->max_speed_hz = spi->max_speed_hz ? : 4 * HZ_PER_MHZ; + ret = spi_setup(spi); + if (ret) + return ret; + + devtype = spi_get_device_match_data(spi); + if (!devtype) + return dev_err_probe(&spi->dev, -ENODEV, "Failed to match device\n"); + + for (i = 0; i < devtype->nr_uart; i++) { + sc16is7xx_regcfg.name = sc16is7xx_regmap_name(i); + /* + * If read_flag_mask is 0, the regmap code sets it to a default + * of 0x80. Since we specify our own mask, we must add the READ + * bit ourselves: + */ + sc16is7xx_regcfg.read_flag_mask = sc16is7xx_regmap_port_mask(i) | + SC16IS7XX_SPI_READ_BIT; + sc16is7xx_regcfg.write_flag_mask = sc16is7xx_regmap_port_mask(i); + regmaps[i] = devm_regmap_init_spi(spi, &sc16is7xx_regcfg); + } + + return sc16is7xx_probe(&spi->dev, devtype, regmaps, spi->irq); +} + +static void sc16is7xx_spi_remove(struct spi_device *spi) +{ + sc16is7xx_remove(&spi->dev); +} + +static const struct spi_device_id sc16is7xx_spi_id_table[] = { + { "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is740", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is741", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is750", (kernel_ulong_t)&sc16is750_devtype, }, + { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, }, + { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, }, + { "sc16is762", (kernel_ulong_t)&sc16is762_devtype, }, + { } +}; +MODULE_DEVICE_TABLE(spi, sc16is7xx_spi_id_table); + +static struct spi_driver sc16is7xx_spi_driver = { + .driver = { + .name = SC16IS7XX_NAME, + .of_match_table = sc16is7xx_dt_ids, + }, + .probe = sc16is7xx_spi_probe, + .remove = sc16is7xx_spi_remove, + .id_table = sc16is7xx_spi_id_table, +}; + +static int __init sc16is7xx_spi_init(void) +{ + return spi_register_driver(&sc16is7xx_spi_driver); +} +module_init(sc16is7xx_spi_init); + +static void __exit sc16is7xx_spi_exit(void) +{ + spi_unregister_driver(&sc16is7xx_spi_driver); +} +module_exit(sc16is7xx_spi_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SC16IS7xx SPI interface driver");