diff mbox series

[v3,4/5] serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_lines)

Message ID 20240402174353.256627-5-hugo@hugovil.com
State Superseded
Headers show
Series serial: sc16is7xx: split into core and I2C/SPI parts | expand

Commit Message

Hugo Villeneuve April 2, 2024, 5:43 p.m. UTC 
From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

Before, sc16is7xx_lines was checked for a free (zero) bit first, and then
later it was set only if UART port registration succeeded. Now that
sc16is7xx_lines is shared for the I2C and SPI drivers, there is a
possibility that the two drivers can simultaneously try to reserve the same
line bit at the same time.

To prevent this, make sure line allocation is reserved atomically, and use
a new variable to hold the status of UART port regisration.

Now that we no longer need to search if a bit is set, it is now possible
to simplify sc16is7xx_lines allocation by using the IDA framework.

Link: https://lore.kernel.org/all/20231212150302.a9ec5d085a4ba65e89ca41af@hugovil.com/
Link: https://lore.kernel.org/all/CAHp75VebCZckUrNraYQj9k=Mrn2kbYs1Lx26f5-8rKJ3RXeh-w@mail.gmail.com/
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
 drivers/tty/serial/sc16is7xx.c | 30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 05e5cbc0f9e8b..58ab6b16860b8 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -341,7 +341,7 @@  struct sc16is7xx_port {
 	struct sc16is7xx_one		p[];
 };
 
-static DECLARE_BITMAP(sc16is7xx_lines, SC16IS7XX_MAX_DEVS);
+static DEFINE_IDA(sc16is7xx_lines);
 
 static struct uart_driver sc16is7xx_uart = {
 	.owner		= THIS_MODULE,
@@ -1468,6 +1468,7 @@  int sc16is7xx_probe(struct device *dev, const struct sc16is7xx_devtype *devtype,
 	u32 uartclk = 0;
 	int i, ret;
 	struct sc16is7xx_port *s;
+	bool port_registered[SC16IS7XX_MAX_PORTS];
 
 	for (i = 0; i < devtype->nr_uart; i++)
 		if (IS_ERR(regmaps[i]))
@@ -1532,13 +1533,19 @@  int sc16is7xx_probe(struct device *dev, const struct sc16is7xx_devtype *devtype,
 	regmap_write(regmaps[0], SC16IS7XX_IOCONTROL_REG,
 		     SC16IS7XX_IOCONTROL_SRESET_BIT);
 
+	/* Mark each port line and status as uninitialised. */
 	for (i = 0; i < devtype->nr_uart; ++i) {
-		s->p[i].port.line = find_first_zero_bit(sc16is7xx_lines,
-							SC16IS7XX_MAX_DEVS);
-		if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) {
-			ret = -ERANGE;
+		s->p[i].port.line = SC16IS7XX_MAX_DEVS;
+		port_registered[i] = false;
+	}
+
+	for (i = 0; i < devtype->nr_uart; ++i) {
+		ret = ida_alloc_max(&sc16is7xx_lines,
+				    SC16IS7XX_MAX_DEVS - 1, GFP_KERNEL);
+		if (ret < 0)
 			goto out_ports;
-		}
+
+		s->p[i].port.line = ret;
 
 		/* Initialize port data */
 		s->p[i].port.dev	= dev;
@@ -1584,7 +1591,7 @@  int sc16is7xx_probe(struct device *dev, const struct sc16is7xx_devtype *devtype,
 		if (ret)
 			goto out_ports;
 
-		set_bit(s->p[i].port.line, sc16is7xx_lines);
+		port_registered[i] = true;
 
 		/* Enable EFR */
 		sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_LCR_REG,
@@ -1642,9 +1649,12 @@  int sc16is7xx_probe(struct device *dev, const struct sc16is7xx_devtype *devtype,
 #endif
 
 out_ports:
-	for (i = 0; i < devtype->nr_uart; i++)
-		if (test_and_clear_bit(s->p[i].port.line, sc16is7xx_lines))
+	for (i = 0; i < devtype->nr_uart; i++) {
+		if (s->p[i].port.line < SC16IS7XX_MAX_DEVS)
+			ida_free(&sc16is7xx_lines, s->p[i].port.line);
+		if (port_registered[i])
 			uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port);
+	}
 
 	kthread_stop(s->kworker_task);
 
@@ -1667,7 +1677,7 @@  void sc16is7xx_remove(struct device *dev)
 
 	for (i = 0; i < s->devtype->nr_uart; i++) {
 		kthread_cancel_delayed_work_sync(&s->p[i].ms_work);
-		clear_bit(s->p[i].port.line, sc16is7xx_lines);
+		ida_free(&sc16is7xx_lines, s->p[i].port.line);
 		uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port);
 		sc16is7xx_power(&s->p[i].port, 0);
 	}