diff mbox series

[v4,4/7] serial: exar: moved generic_rs485 further up in 8250_exar.c

Message ID a7bf2a42de759908c058246ec15f60bde9a5dc65.1713382717.git.pnewman@connecttech.com
State Superseded
Headers show
Series serial: exar: add Connect Tech serial cards to Exar driver | expand

Commit Message

Parker Newman April 17, 2024, 8:31 p.m. UTC 
From: Parker Newman <pnewman@connecttech.com>

Preparatory patch moving generic_rs485_config and
generic_rs485_supported higher in the file to allow for CTI setup
functions to use them.

Signed-off-by: Parker Newman <pnewman@connecttech.com>
---
Changes in v3:
 - split into separate preparatory patch

 drivers/tty/serial/8250/8250_exar.c | 50 ++++++++++++++---------------
 1 file changed, 25 insertions(+), 25 deletions(-)

--
2.43.2

Comments

Ilpo Järvinen April 18, 2024, 11:37 a.m. UTC | #1 
Hi,

In shortlog (Subject), 

- moved -> move
- exar: -> 8250_exar:

After those, "in 8250_exar.c" is redundant information and can be removed.

> From: Parker Newman <pnewman@connecttech.com>
> 
> Preparatory patch moving generic_rs485_config and

Use () when talking about functions.

After fixing those, feel free to add,

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
diff mbox series

Patch

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index f14f73d250bb..e68029a59122 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -197,6 +197,31 @@  struct exar8250 {
 	int			line[];
 };

+static int generic_rs485_config(struct uart_port *port, struct ktermios *termios,
+				struct serial_rs485 *rs485)
+{
+	bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED);
+	u8 __iomem *p = port->membase;
+	u8 value;
+
+	value = readb(p + UART_EXAR_FCTR);
+	if (is_rs485)
+		value |= UART_FCTR_EXAR_485;
+	else
+		value &= ~UART_FCTR_EXAR_485;
+
+	writeb(value, p + UART_EXAR_FCTR);
+
+	if (is_rs485)
+		writeb(UART_EXAR_RS485_DLY(4), p + UART_MSR);
+
+	return 0;
+}
+
+static const struct serial_rs485 generic_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND,
+};
+
 static void exar_pm(struct uart_port *port, unsigned int state, unsigned int old)
 {
 	/*
@@ -459,27 +484,6 @@  static void xr17v35x_unregister_gpio(struct uart_8250_port *port)
 	port->port.private_data = NULL;
 }

-static int generic_rs485_config(struct uart_port *port, struct ktermios *termios,
-				struct serial_rs485 *rs485)
-{
-	bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED);
-	u8 __iomem *p = port->membase;
-	u8 value;
-
-	value = readb(p + UART_EXAR_FCTR);
-	if (is_rs485)
-		value |= UART_FCTR_EXAR_485;
-	else
-		value &= ~UART_FCTR_EXAR_485;
-
-	writeb(value, p + UART_EXAR_FCTR);
-
-	if (is_rs485)
-		writeb(UART_EXAR_RS485_DLY(4), p + UART_MSR);
-
-	return 0;
-}
-
 static int sealevel_rs485_config(struct uart_port *port, struct ktermios *termios,
 				  struct serial_rs485 *rs485)
 {
@@ -518,10 +522,6 @@  static int sealevel_rs485_config(struct uart_port *port, struct ktermios *termio
 	return 0;
 }

-static const struct serial_rs485 generic_rs485_supported = {
-	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND,
-};
-
 static const struct exar8250_platform exar8250_default_platform = {
 	.register_gpio = xr17v35x_register_gpio,
 	.unregister_gpio = xr17v35x_unregister_gpio,