@@ -720,6 +720,104 @@ void geni_se_rx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len)
}
EXPORT_SYMBOL(geni_se_rx_dma_unprep);
+int geni_icc_get(struct geni_se *se, const char *icc_core, const char *icc_cpu,
+ const char *icc_ddr)
+{
+ if (icc_core) {
+ se->to_core.path = devm_of_icc_get(se->dev, "qup-core");
+ if (IS_ERR(se->to_core.path))
+ return PTR_ERR(se->to_core.path);
+ }
+
+ if (icc_cpu) {
+ se->from_cpu.path = devm_of_icc_get(se->dev, "qup-config");
+ if (IS_ERR(se->from_cpu.path))
+ return PTR_ERR(se->from_cpu.path);
+ }
+
+ if (icc_ddr) {
+ se->to_ddr.path = devm_of_icc_get(se->dev, "qup-memory");
+ if (IS_ERR(se->to_ddr.path))
+ return PTR_ERR(se->to_ddr.path);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(geni_icc_get);
+
+int geni_icc_vote_on(struct geni_se *se)
+{
+ int ret;
+
+ if (se->to_core.path) {
+ ret = icc_set_bw(se->to_core.path, se->to_core.avg_bw,
+ se->to_core.peak_bw);
+ if (ret) {
+ dev_err_ratelimited(se->dev, "%s: ICC BW voting failed for core\n",
+ __func__);
+ return ret;
+ }
+ }
+
+ if (se->from_cpu.path) {
+ ret = icc_set_bw(se->from_cpu.path, se->from_cpu.avg_bw,
+ se->from_cpu.peak_bw);
+ if (ret) {
+ dev_err_ratelimited(se->dev, "%s: ICC BW voting failed for cpu\n",
+ __func__);
+ return ret;
+ }
+ }
+
+ if (se->to_ddr.path) {
+ ret = icc_set_bw(se->to_ddr.path, se->to_ddr.avg_bw,
+ se->to_ddr.peak_bw);
+ if (ret) {
+ dev_err_ratelimited(se->dev, "%s: ICC BW voting failed for ddr\n",
+ __func__);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(geni_icc_vote_on);
+
+int geni_icc_vote_off(struct geni_se *se)
+{
+ int ret;
+
+ if (se->to_core.path) {
+ ret = icc_set_bw(se->to_core.path, 0, 0);
+ if (ret) {
+ dev_err_ratelimited(se->dev, "%s: ICC BW remove failed for core\n",
+ __func__);
+ return ret;
+ }
+ }
+
+ if (se->from_cpu.path) {
+ ret = icc_set_bw(se->from_cpu.path, 0, 0);
+ if (ret) {
+ dev_err_ratelimited(se->dev, "%s: ICC BW remove failed for cpu\n",
+ __func__);
+ return ret;
+ }
+ }
+
+ if (se->to_ddr.path) {
+ ret = icc_set_bw(se->to_ddr.path, 0, 0);
+ if (ret) {
+ dev_err_ratelimited(se->dev, "%s: ICC BW remove failed for ddr\n",
+ __func__);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(geni_icc_vote_off);
+
static int geni_se_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -6,6 +6,8 @@
#ifndef _LINUX_QCOM_GENI_SE
#define _LINUX_QCOM_GENI_SE
+#include <linux/interconnect.h>
+
/* Transfer mode supported by GENI Serial Engines */
enum geni_se_xfer_mode {
GENI_SE_INVALID,
@@ -25,6 +27,12 @@ enum geni_se_protocol_type {
struct geni_wrapper;
struct clk;
+struct geni_icc_path {
+ struct icc_path *path;
+ unsigned int avg_bw;
+ unsigned int peak_bw;
+};
+
/**
* struct geni_se - GENI Serial Engine
* @base: Base Address of the Serial Engine's register block
@@ -33,6 +41,9 @@ struct clk;
* @clk: Handle to the core serial engine clock
* @num_clk_levels: Number of valid clock levels in clk_perf_tbl
* @clk_perf_tbl: Table of clock frequency input to serial engine clock
+ * @to_core: ICC path structure for geni to core
+ * @from_cpu: ICC path structure for cpu to geni
+ * @to_ddr: ICC path structure for geni to ddr
*/
struct geni_se {
void __iomem *base;
@@ -41,6 +52,9 @@ struct geni_se {
struct clk *clk;
unsigned int num_clk_levels;
unsigned long *clk_perf_tbl;
+ struct geni_icc_path to_core;
+ struct geni_icc_path from_cpu;
+ struct geni_icc_path to_ddr;
};
/* Common SE registers */
@@ -229,6 +243,21 @@ struct geni_se {
#define GENI_SE_VERSION_MINOR(ver) ((ver & HW_VER_MINOR_MASK) >> HW_VER_MINOR_SHFT)
#define GENI_SE_VERSION_STEP(ver) (ver & HW_VER_STEP_MASK)
+/*
+ * Define bandwidth thresholds that cause the underlying Core 2X interconnect
+ * clock to run at the named frequency. These baseline values are recommended
+ * by the hardware team, and are not dynamically scaled with GENI bandwidth
+ * beyond basic on/off.
+ */
+#define CORE_2X_19_2_MHZ 960
+#define CORE_2X_50_MHZ 2500
+#define CORE_2X_100_MHZ 5000
+#define CORE_2X_150_MHZ 7500
+#define CORE_2X_200_MHZ 10000
+#define CORE_2X_236_MHZ 16383
+
+#define GENI_DEFAULT_BW Bps_to_icc(1000)
+
#if IS_ENABLED(CONFIG_QCOM_GENI_SE)
u32 geni_se_get_qup_hw_version(struct geni_se *se);
@@ -416,5 +445,12 @@ int geni_se_rx_dma_prep(struct geni_se *se, void *buf, size_t len,
void geni_se_tx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len);
void geni_se_rx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len);
+
+int geni_icc_get(struct geni_se *se, const char *icc_core, const char *icc_cpu,
+ const char *icc_ddr);
+
+int geni_icc_vote_on(struct geni_se *se);
+
+int geni_icc_vote_off(struct geni_se *se);
#endif
#endif
Add necessary macros and structure variables to support ICC BW voting from individual SE drivers. Signed-off-by: Akash Asthana <akashast@codeaurora.org> --- Changes in V2: - As per Bjorn's comment dropped enums for ICC paths, given the three paths individual members Changes in V3: - Add geni_icc_get, geni_icc_vote_on and geni_icc_vote_off as helper API. - Add geni_icc_path structure in common header drivers/soc/qcom/qcom-geni-se.c | 98 +++++++++++++++++++++++++++++++++++++++++ include/linux/qcom-geni-se.h | 36 +++++++++++++++ 2 files changed, 134 insertions(+)