From patchwork Thu May 11 07:31:28 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Mahapatra, Amit Kumar" X-Patchwork-Id: 681133 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 62203C77B7C for ; Thu, 11 May 2023 07:32:03 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237380AbjEKHcC (ORCPT ); Thu, 11 May 2023 03:32:02 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38710 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S237338AbjEKHb6 (ORCPT ); Thu, 11 May 2023 03:31:58 -0400 Received: from NAM12-DM6-obe.outbound.protection.outlook.com (mail-dm6nam12on2045.outbound.protection.outlook.com [40.107.243.45]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 27F0E40EB; Thu, 11 May 2023 00:31:54 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=Bz57yN6Jni5B8RhpImzJ2TZtWiLnfI/ysa3YGlVtcasLw1dgd+eMQ/oZFa5I1aa/W2R/I/ZHeyWNRGxf/6JpVbgcNS4pbnPUR5eOOfDFO4iiQ8IMrEX47ePGl+9tnS8E0tpl0hQz8yqlARGNn9gZxf8aH72n3+vgIAsRAuZWO8cg4BTorlmLvXNJYy/BbL7y1ZAGyxE9snaaphe31PO9T0PzGA9CcYK1i+pespSok1bc9eZ/EBiVme1TT4ZYhGHDv6LA4h2aMiBy0IL6tMUVi3QEkWFbLNP9pEMyzIjRFYM4OKe3pRLXNTeAKLOxWYqVVDvpFkBp4D3JraP8q7p/9w== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=Pd8javLJzZDbAEgQKEQcqeFybkTfClftzfV855fu7Z4=; b=PWi9dwREwK/P0fFPQPagM548CR1HWIGXSwj8cNEYiqDsCWVizY3T42kaVAXvquittlerRpdw9d1UYsqF0Bf71DQ6JqIWW5wum4KVx8x0lr70xrZkFD+dE8gjij18NOVI+N9X4KTyefV7ZcDeC00szdTe16w6IAOc2ogJ04RWHGLS2NYO5SleWTTEyRRfLINtQak+W9XbNhmrxLVOBAOu5KXXeibpNqyH0nUb6m5/3ZEQJOBAZmE5VqTiRvxZplcMT4ZMhTF8emEJxI81I/wudcg3Jc7i3pQnkxEMezxbPQ81NH9KXrS8pfNksD+AuH2icvkLepvqpAHc7C3RzYEyqA== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 165.204.84.17) smtp.rcpttodomain=kernel.org smtp.mailfrom=amd.com; dmarc=pass (p=quarantine sp=quarantine pct=100) action=none header.from=amd.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amd.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=Pd8javLJzZDbAEgQKEQcqeFybkTfClftzfV855fu7Z4=; b=IXpqryvF85S8gEuyN9q27s0JurGGAmvjmDhgOt2EZgCH6lyJdBOSdz+MZjJljoLbcQePkLh5sNND+nKSOF3UNWRH6BcJwi8POZVNqE6XsBj9r0PKJjMTf146TCLest8Dpro8PF9Y25vneF3M3QHuZuHcFVURkD7QauC3LpQxrB4= Received: from MWH0EPF00056D18.namprd21.prod.outlook.com (2603:10b6:30f:fff2:0:1:0:19) by PH8PR12MB7279.namprd12.prod.outlook.com (2603:10b6:510:221::10) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6387.19; Thu, 11 May 2023 07:31:48 +0000 Received: from CO1NAM11FT115.eop-nam11.prod.protection.outlook.com (2a01:111:f400:7eab::203) by MWH0EPF00056D18.outlook.office365.com (2603:1036:d20::b) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6411.6 via Frontend Transport; Thu, 11 May 2023 07:31:48 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 165.204.84.17) smtp.mailfrom=amd.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=amd.com; Received-SPF: Pass (protection.outlook.com: domain of amd.com designates 165.204.84.17 as permitted sender) receiver=protection.outlook.com; client-ip=165.204.84.17; helo=SATLEXMB04.amd.com; pr=C Received: from SATLEXMB04.amd.com (165.204.84.17) by CO1NAM11FT115.mail.protection.outlook.com (10.13.174.211) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.6387.22 via Frontend Transport; Thu, 11 May 2023 07:31:47 +0000 Received: from SATLEXMB03.amd.com (10.181.40.144) by SATLEXMB04.amd.com (10.181.40.145) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2375.34; Thu, 11 May 2023 02:31:46 -0500 Received: from xhdakumarma40u.xilinx.com (10.180.168.240) by SATLEXMB03.amd.com (10.181.40.144) with Microsoft SMTP Server id 15.1.2375.34 via Frontend Transport; Thu, 11 May 2023 02:31:41 -0500 From: Amit Kumar Mahapatra To: , , , , , , CC: , , , , , , , , , , , Amit Kumar Mahapatra Subject: [PATCH V8 1/7] spi: Add stacked and parallel memories support in SPI core Date: Thu, 11 May 2023 13:01:28 +0530 Message-ID: <20230511073134.41180-2-amit.kumar-mahapatra@amd.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20230511073134.41180-1-amit.kumar-mahapatra@amd.com> References: <20230511073134.41180-1-amit.kumar-mahapatra@amd.com> MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: CO1NAM11FT115:EE_|PH8PR12MB7279:EE_ X-MS-Office365-Filtering-Correlation-Id: 22bf3570-fd2b-4ffa-fc44-08db51f1c794 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:165.204.84.17; CTRY:US; LANG:en; SCL:1; SRV:; IPV:CAL; SFV:NSPM; H:SATLEXMB04.amd.com; PTR:InfoDomainNonexistent; CAT:NONE; SFS:(13230028)(4636009)(346002)(396003)(376002)(39860400002)(136003)(451199021)(36840700001)(46966006)(40470700004)(6666004)(8676002)(40460700003)(966005)(30864003)(70586007)(110136005)(82740400003)(70206006)(54906003)(36756003)(7416002)(4326008)(2906002)(356005)(86362001)(41300700001)(81166007)(316002)(82310400005)(8936002)(40480700001)(5660300002)(478600001)(186003)(1076003)(26005)(426003)(83380400001)(2616005)(47076005)(336012)(36860700001)(36900700001); DIR:OUT; SFP:1101; X-OriginatorOrg: amd.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 11 May 2023 07:31:47.9049 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: 22bf3570-fd2b-4ffa-fc44-08db51f1c794 X-MS-Exchange-CrossTenant-Id: 3dd8961f-e488-4e60-8e11-a82d994e183d X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=3dd8961f-e488-4e60-8e11-a82d994e183d; Ip=[165.204.84.17]; Helo=[SATLEXMB04.amd.com] X-MS-Exchange-CrossTenant-AuthSource: CO1NAM11FT115.eop-nam11.prod.protection.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: PH8PR12MB7279 Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org For supporting multiple CS the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controntroller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. Signed-off-by: Amit Kumar Mahapatra Tested-by: Stefan Binding --- CS GPIO is not tested on our hardware but it has been tested by @Stefan https://lore.kernel.org/all/3f148a0c-8885-0425-28f4-2a53937a388f@opensource.cirrus.com/ Stefan, could you please provide your Tested-by tag for this patch --- drivers/spi/spi.c | 231 ++++++++++++++++++++++++++++------------ include/linux/spi/spi.h | 32 ++++-- 2 files changed, 189 insertions(+), 74 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 9291b2a0e887..a793e56f6a21 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -612,10 +612,24 @@ static int spi_dev_check(struct device *dev, void *data) { struct spi_device *spi = to_spi_device(dev); struct spi_device *new_spi = data; + int idx, nw_idx; - if (spi->controller == new_spi->controller && - spi_get_chipselect(spi, 0) == spi_get_chipselect(new_spi, 0)) - return -EBUSY; + if (spi->controller == new_spi->controller) { + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { + for (nw_idx = 0; nw_idx < SPI_CS_CNT_MAX; nw_idx++) { + if ((idx != 0 && !spi_get_chipselect(spi, idx)) || + (nw_idx != 0 && !spi_get_chipselect(spi, nw_idx))) { + continue; + } else if (spi_get_chipselect(spi, idx) == + spi_get_chipselect(new_spi, nw_idx)) { + dev_err(dev, + "chipselect %d already in use\n", + spi_get_chipselect(new_spi, nw_idx)); + return -EBUSY; + } + } + } + } return 0; } @@ -629,7 +643,7 @@ static int __spi_add_device(struct spi_device *spi) { struct spi_controller *ctlr = spi->controller; struct device *dev = ctlr->dev.parent; - int status; + int status, idx; /* * We need to make sure there's no other device with this @@ -638,8 +652,6 @@ static int __spi_add_device(struct spi_device *spi) */ status = bus_for_each_dev(&spi_bus_type, NULL, spi, spi_dev_check); if (status) { - dev_err(dev, "chipselect %d already in use\n", - spi_get_chipselect(spi, 0)); return status; } @@ -649,8 +661,13 @@ static int __spi_add_device(struct spi_device *spi) return -ENODEV; } - if (ctlr->cs_gpiods) - spi_set_csgpiod(spi, 0, ctlr->cs_gpiods[spi_get_chipselect(spi, 0)]); + if (ctlr->cs_gpiods) { + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { + if (!(idx != 0 && !spi_get_chipselect(spi, idx))) + spi_set_csgpiod(spi, idx, + ctlr->cs_gpiods[spi_get_chipselect(spi, idx)]); + } + } /* * Drivers may modify this initial i/o setup, but will @@ -690,13 +707,15 @@ int spi_add_device(struct spi_device *spi) { struct spi_controller *ctlr = spi->controller; struct device *dev = ctlr->dev.parent; - int status; + int status, idx; - /* Chipselects are numbered 0..max; validate. */ - if (spi_get_chipselect(spi, 0) >= ctlr->num_chipselect) { - dev_err(dev, "cs%d >= max %d\n", spi_get_chipselect(spi, 0), - ctlr->num_chipselect); - return -EINVAL; + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { + /* Chipselects are numbered 0..max; validate. */ + if (spi_get_chipselect(spi, idx) >= ctlr->num_chipselect) { + dev_err(dev, "cs%d >= max %d\n", spi_get_chipselect(spi, idx), + ctlr->num_chipselect); + return -EINVAL; + } } /* Set the bus ID string */ @@ -713,12 +732,15 @@ static int spi_add_device_locked(struct spi_device *spi) { struct spi_controller *ctlr = spi->controller; struct device *dev = ctlr->dev.parent; + int idx; - /* Chipselects are numbered 0..max; validate. */ - if (spi_get_chipselect(spi, 0) >= ctlr->num_chipselect) { - dev_err(dev, "cs%d >= max %d\n", spi_get_chipselect(spi, 0), - ctlr->num_chipselect); - return -EINVAL; + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { + /* Chipselects are numbered 0..max; validate. */ + if (spi_get_chipselect(spi, idx) >= ctlr->num_chipselect) { + dev_err(dev, "cs%d >= max %d\n", spi_get_chipselect(spi, idx), + ctlr->num_chipselect); + return -EINVAL; + } } /* Set the bus ID string */ @@ -966,58 +988,122 @@ static void spi_res_release(struct spi_controller *ctlr, struct spi_message *mes static void spi_set_cs(struct spi_device *spi, bool enable, bool force) { bool activate = enable; + u32 cs_num = 0; + int idx; /* - * Avoid calling into the driver (or doing delays) if the chip select - * isn't actually changing from the last time this was called. + * In parallel mode all the chip selects are asserted/de-asserted + * at once */ - if (!force && ((enable && spi->controller->last_cs == spi_get_chipselect(spi, 0)) || - (!enable && spi->controller->last_cs != spi_get_chipselect(spi, 0))) && - (spi->controller->last_cs_mode_high == (spi->mode & SPI_CS_HIGH))) - return; - - trace_spi_set_cs(spi, activate); + if ((spi->cs_index_mask & SPI_PARALLEL_CS_MASK) == SPI_PARALLEL_CS_MASK) { + spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH; + + if ((spi_get_csgpiod(spi, 0) || !spi->controller->set_cs_timing) && !activate) + spi_delay_exec(&spi->cs_hold, NULL); + + if (spi->mode & SPI_CS_HIGH) + enable = !enable; + + if (spi_get_csgpiod(spi, 0) && spi_get_csgpiod(spi, 1)) { + if (!(spi->mode & SPI_NO_CS)) { + /* + * Historically ACPI has no means of the GPIO polarity and + * thus the SPISerialBus() resource defines it on the per-chip + * basis. In order to avoid a chain of negations, the GPIO + * polarity is considered being Active High. Even for the cases + * when _DSD() is involved (in the updated versions of ACPI) + * the GPIO CS polarity must be defined Active High to avoid + * ambiguity. That's why we use enable, that takes SPI_CS_HIGH + * into account. + */ + if (has_acpi_companion(&spi->dev)) { + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) + gpiod_set_value_cansleep(spi_get_csgpiod(spi, idx), + !enable); + } else { + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) + /* Polarity handled by GPIO library */ + gpiod_set_value_cansleep(spi_get_csgpiod(spi, idx), + activate); + } + } + /* Some SPI masters need both GPIO CS & slave_select */ + if ((spi->controller->flags & SPI_MASTER_GPIO_SS) && + spi->controller->set_cs) + spi->controller->set_cs(spi, !enable); + } else if (spi->controller->set_cs) { + spi->controller->set_cs(spi, !enable); + } - spi->controller->last_cs = enable ? spi_get_chipselect(spi, 0) : -1; - spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH; + if (spi_get_csgpiod(spi, 0) || spi_get_csgpiod(spi, 1) || + !spi->controller->set_cs_timing) { + if (activate) + spi_delay_exec(&spi->cs_setup, NULL); + else + spi_delay_exec(&spi->cs_inactive, NULL); + } + } else { - if ((spi_get_csgpiod(spi, 0) || !spi->controller->set_cs_timing) && !activate) - spi_delay_exec(&spi->cs_hold, NULL); + if (spi->cs_index_mask) + cs_num = ffs(spi->cs_index_mask) - 1; - if (spi->mode & SPI_CS_HIGH) - enable = !enable; + /* + * Avoid calling into the driver (or doing delays) if the chip select + * isn't actually changing from the last time this was called. + */ + if (!force && ((enable && spi->controller->last_cs == + spi_get_chipselect(spi, cs_num)) || + (!enable && spi->controller->last_cs != + spi_get_chipselect(spi, cs_num))) && + (spi->controller->last_cs_mode_high == + (spi->mode & SPI_CS_HIGH))) + return; + + trace_spi_set_cs(spi, activate); + + spi->controller->last_cs = enable ? spi_get_chipselect(spi, cs_num) : -1; + spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH; + + if ((spi_get_csgpiod(spi, cs_num) || !spi->controller->set_cs_timing) && !activate) + spi_delay_exec(&spi->cs_hold, NULL); + + if (spi->mode & SPI_CS_HIGH) + enable = !enable; + + if (spi_get_csgpiod(spi, cs_num)) { + if (!(spi->mode & SPI_NO_CS)) { + /* + * Historically ACPI has no means of the GPIO polarity and + * thus the SPISerialBus() resource defines it on the per-chip + * basis. In order to avoid a chain of negations, the GPIO + * polarity is considered being Active High. Even for the cases + * when _DSD() is involved (in the updated versions of ACPI) + * the GPIO CS polarity must be defined Active High to avoid + * ambiguity. That's why we use enable, that takes SPI_CS_HIGH + * into account. + */ + if (has_acpi_companion(&spi->dev)) + gpiod_set_value_cansleep(spi_get_csgpiod(spi, cs_num), + !enable); + else + /* Polarity handled by GPIO library */ + gpiod_set_value_cansleep(spi_get_csgpiod(spi, cs_num), + activate); + } + /* Some SPI masters need both GPIO CS & slave_select */ + if ((spi->controller->flags & SPI_MASTER_GPIO_SS) && + spi->controller->set_cs) + spi->controller->set_cs(spi, !enable); + } else if (spi->controller->set_cs) { + spi->controller->set_cs(spi, !enable); + } - if (spi_get_csgpiod(spi, 0)) { - if (!(spi->mode & SPI_NO_CS)) { - /* - * Historically ACPI has no means of the GPIO polarity and - * thus the SPISerialBus() resource defines it on the per-chip - * basis. In order to avoid a chain of negations, the GPIO - * polarity is considered being Active High. Even for the cases - * when _DSD() is involved (in the updated versions of ACPI) - * the GPIO CS polarity must be defined Active High to avoid - * ambiguity. That's why we use enable, that takes SPI_CS_HIGH - * into account. - */ - if (has_acpi_companion(&spi->dev)) - gpiod_set_value_cansleep(spi_get_csgpiod(spi, 0), !enable); + if (spi_get_csgpiod(spi, cs_num) || !spi->controller->set_cs_timing) { + if (activate) + spi_delay_exec(&spi->cs_setup, NULL); else - /* Polarity handled by GPIO library */ - gpiod_set_value_cansleep(spi_get_csgpiod(spi, 0), activate); + spi_delay_exec(&spi->cs_inactive, NULL); } - /* Some SPI masters need both GPIO CS & slave_select */ - if ((spi->controller->flags & SPI_MASTER_GPIO_SS) && - spi->controller->set_cs) - spi->controller->set_cs(spi, !enable); - } else if (spi->controller->set_cs) { - spi->controller->set_cs(spi, !enable); - } - - if (spi_get_csgpiod(spi, 0) || !spi->controller->set_cs_timing) { - if (activate) - spi_delay_exec(&spi->cs_setup, NULL); - else - spi_delay_exec(&spi->cs_inactive, NULL); } } @@ -2246,8 +2332,8 @@ static void of_spi_parse_dt_cs_delay(struct device_node *nc, static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, struct device_node *nc) { - u32 value; - int rc; + u32 value, cs[SPI_CS_CNT_MAX] = {0}; + int rc, idx; /* Mode (clock phase/polarity/etc.) */ if (of_property_read_bool(nc, "spi-cpha")) @@ -2320,13 +2406,21 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, } /* Device address */ - rc = of_property_read_u32(nc, "reg", &value); - if (rc) { + rc = of_property_read_variable_u32_array(nc, "reg", &cs[0], 1, + SPI_CS_CNT_MAX); + if (rc < 0 || rc > ctlr->num_chipselect) { dev_err(&ctlr->dev, "%pOF has no valid 'reg' property (%d)\n", nc, rc); return rc; + } else if ((of_property_read_bool(nc, "parallel-memories")) && + (!(ctlr->flags & SPI_CONTROLLER_MULTI_CS))) { + dev_err(&ctlr->dev, "SPI controller doesn't support multi CS\n"); + return -EINVAL; } - spi_set_chipselect(spi, 0, value); + for (idx = 0; idx < rc; idx++) + spi_set_chipselect(spi, idx, cs[idx]); + /* By default set the spi->cs_index_mask as 1 */ + spi->cs_index_mask = 0x01; /* Device speed */ if (!of_property_read_u32(nc, "spi-max-frequency", &value)) @@ -3905,7 +3999,8 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message) * cs_change is set for each transfer. */ if ((spi->mode & SPI_CS_WORD) && (!(ctlr->mode_bits & SPI_CS_WORD) || - spi_get_csgpiod(spi, 0))) { + spi_get_csgpiod(spi, 0) || + spi_get_csgpiod(spi, 1))) { size_t maxsize; int ret; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index cfe42f8cd7a4..d0f9a9a8b6d8 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -19,6 +19,11 @@ #include #include +/* Max no. of CS supported per spi device */ +#define SPI_CS_CNT_MAX 2 + +/* chip select mask */ +#define SPI_PARALLEL_CS_MASK (BIT(0) | BIT(1)) struct dma_chan; struct software_node; struct ptp_system_timestamp; @@ -166,6 +171,7 @@ extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg, * deasserted. If @cs_change_delay is used from @spi_transfer, then the * two delays will be added up. * @pcpu_statistics: statistics for the spi_device + * @cs_index_mask: Bit mask of the active chipselect(s) in the chipselect array * * A @spi_device is used to interchange data between an SPI slave * (usually a discrete chip) and CPU memory. @@ -181,7 +187,7 @@ struct spi_device { struct spi_controller *controller; struct spi_controller *master; /* Compatibility layer */ u32 max_speed_hz; - u8 chip_select; + u8 chip_select[SPI_CS_CNT_MAX]; u8 bits_per_word; bool rt; #define SPI_NO_TX BIT(31) /* No transmit wire */ @@ -212,7 +218,7 @@ struct spi_device { void *controller_data; char modalias[SPI_NAME_SIZE]; const char *driver_override; - struct gpio_desc *cs_gpiod; /* Chip select gpio desc */ + struct gpio_desc *cs_gpiod[SPI_CS_CNT_MAX]; /* Chip select gpio desc */ struct spi_delay word_delay; /* Inter-word delay */ /* CS delays */ struct spi_delay cs_setup; @@ -222,6 +228,13 @@ struct spi_device { /* The statistics */ struct spi_statistics __percpu *pcpu_statistics; + /* Bit mask of the chipselect(s) that the driver need to use from + * the chipselect array.When the controller is capable to handle + * multiple chip selects & memories are connected in parallel + * then more than one bit need to be set in cs_index_mask. + */ + u32 cs_index_mask : SPI_CS_CNT_MAX; + /* * likely need more hooks for more protocol options affecting how * the controller talks to each chip, like: @@ -278,22 +291,22 @@ static inline void *spi_get_drvdata(const struct spi_device *spi) static inline u8 spi_get_chipselect(const struct spi_device *spi, u8 idx) { - return spi->chip_select; + return spi->chip_select[idx]; } static inline void spi_set_chipselect(struct spi_device *spi, u8 idx, u8 chipselect) { - spi->chip_select = chipselect; + spi->chip_select[idx] = chipselect; } static inline struct gpio_desc *spi_get_csgpiod(const struct spi_device *spi, u8 idx) { - return spi->cs_gpiod; + return spi->cs_gpiod[idx]; } static inline void spi_set_csgpiod(struct spi_device *spi, u8 idx, struct gpio_desc *csgpiod) { - spi->cs_gpiod = csgpiod; + spi->cs_gpiod[idx] = csgpiod; } /** @@ -398,6 +411,8 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch * @bus_lock_spinlock: spinlock for SPI bus locking * @bus_lock_mutex: mutex for exclusion of multiple callers * @bus_lock_flag: indicates that the SPI bus is locked for exclusive use + * @multi_cs_cap: indicates that the SPI Controller can assert/de-assert + * more than one chip select at once. * @setup: updates the device mode and clocking records used by a * device's SPI controller; protocol code may call this. This * must fail if an unrecognized or unsupported mode is requested. @@ -564,6 +579,11 @@ struct spi_controller { #define SPI_CONTROLLER_MUST_TX BIT(4) /* Requires tx */ #define SPI_MASTER_GPIO_SS BIT(5) /* GPIO CS must select slave */ + /* + * The spi-controller has multi chip select capability and can + * assert/de-assert more than one chip select at once. + */ +#define SPI_CONTROLLER_MULTI_CS BIT(6) /* Flag indicating if the allocation of this struct is devres-managed */ bool devm_allocated;