@@ -8,6 +8,24 @@
#include "core.h"
+#define SPINOR_OP_MXIC_RD_ANY_REG 0x71 /* Read volatile configuration register 2 */
+#define SPINOR_OP_MXIC_WR_ANY_REG 0x72 /* Write volatile configuration register 2 */
+#define SPINOR_REG_MXIC_CR2_MODE 0x00000000 /* CR2 address for setting octal DTR mode */
+#define SPINOR_REG_MXIC_CR2_DC 0x00000300 /* CR2 address for setting dummy cycles */
+#define SPINOR_REG_MXIC_OPI_DTR_EN 0x2 /* Enable Octal DTR */
+#define SPINOR_REG_MXIC_SPI_EN 0x0 /* Enable SPI */
+#define SPINOR_REG_MXIC_ADDR_BYTES 4 /* Fixed R/W volatile address bytes to 4 */
+/* Convert dummy cycles to bit pattern */
+#define SPINOR_REG_MXIC_DC(p) \
+ ((20 - p)/2)
+
+/* Macronix SPI NOR flash operations. */
+#define MXIC_NOR_WR_ANY_REG_OP(naddr, addr, ndata, buf) \
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_MXIC_WR_ANY_REG, 0), \
+ SPI_MEM_OP_ADDR(naddr, addr, 0), \
+ SPI_MEM_OP_NO_DUMMY, \
+ SPI_MEM_OP_DATA_OUT(ndata, buf, 0))
+
static int
mx25l25635_post_bfpt_fixups(struct spi_nor *nor,
const struct sfdp_parameter_header *bfpt_header,
@@ -185,6 +203,87 @@ static const struct flash_info macronix_nor_parts[] = {
}
};
+static int macronix_nor_octal_dtr_en(struct spi_nor *nor)
+{
+ struct spi_mem_op op;
+ u8 *buf = nor->bouncebuf, i;
+ int ret;
+
+ /* Use dummy cycles which is parse by SFDP and convert to bit pattern. */
+ buf[0] = SPINOR_REG_MXIC_DC(nor->params->reads[SNOR_CMD_READ_8_8_8_DTR].num_wait_states);
+ op = (struct spi_mem_op)
+ MXIC_NOR_WR_ANY_REG_OP(SPINOR_REG_MXIC_ADDR_BYTES,
+ SPINOR_REG_MXIC_CR2_DC, 1, buf);
+
+ ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
+ if (ret)
+ return ret;
+
+ /* Set the octal and DTR enable bits. */
+ buf[0] = SPINOR_REG_MXIC_OPI_DTR_EN;
+ op = (struct spi_mem_op)
+ MXIC_NOR_WR_ANY_REG_OP(SPINOR_REG_MXIC_ADDR_BYTES,
+ SPINOR_REG_MXIC_CR2_MODE, 1, buf);
+ ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
+ if (ret)
+ return ret;
+
+ /* Read flash ID to make sure the switch was successful. */
+ ret = spi_nor_read_id(nor, 4, 4, buf, SNOR_PROTO_8_8_8_DTR);
+ if (ret) {
+ dev_dbg(nor->dev, "error %d reading JEDEC ID after enabling 8D-8D-8D mode\n", ret);
+ return ret;
+ }
+
+ /* Macronix SPI-NOR flash 8D-8D-8D read ID would get 6 bytes data A-A-B-B-C-C */
+ for (i = 0; i < nor->info->id->len; i++)
+ if (buf[i * 2] != buf[(i * 2) + 1] ||
+ buf[i * 2] != nor->info->id->bytes[i])
+ return -EINVAL;
+
+ return 0;
+}
+
+static int macronix_nor_octal_dtr_dis(struct spi_nor *nor)
+{
+ struct spi_mem_op op;
+ u8 *buf = nor->bouncebuf;
+ int ret;
+
+ /*
+ * The register is 1-byte wide, but 1-byte transactions are not
+ * allowed in 8D-8D-8D mode. Since there is no register at the
+ * next location, just initialize the value to 0 and let the
+ * transaction go on.
+ */
+ buf[0] = SPINOR_REG_MXIC_SPI_EN;
+ buf[1] = 0x0;
+ op = (struct spi_mem_op)
+ MXIC_NOR_WR_ANY_REG_OP(SPINOR_REG_MXIC_ADDR_BYTES,
+ SPINOR_REG_MXIC_CR2_MODE, 2, buf);
+ ret = spi_nor_write_any_volatile_reg(nor, &op, SNOR_PROTO_8_8_8_DTR);
+ if (ret)
+ return ret;
+
+ /* Read flash ID to make sure the switch was successful. */
+ ret = spi_nor_read_id(nor, 0, 0, buf, SNOR_PROTO_1_1_1);
+ if (ret) {
+ dev_dbg(nor->dev, "error %d reading JEDEC ID after disabling 8D-8D-8D mode\n", ret);
+ return ret;
+ }
+
+ if (memcmp(buf, nor->info->id->bytes, nor->info->id->len))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int macronix_nor_set_octal_dtr(struct spi_nor *nor, bool enable)
+{
+ return enable ? macronix_nor_octal_dtr_en(nor) :
+ macronix_nor_octal_dtr_dis(nor);
+}
+
static void macronix_nor_default_init(struct spi_nor *nor)
{
nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
@@ -194,6 +293,7 @@ static int macronix_nor_late_init(struct spi_nor *nor)
{
if (!nor->params->set_4byte_addr_mode)
nor->params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode_en4b_ex4b;
+ nor->params->set_octal_dtr = macronix_nor_set_octal_dtr;
return 0;
}