From patchwork Thu Nov 28 17:43:15 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?b?Q3PDs2vDoXMsIEJlbmNl?= X-Patchwork-Id: 846271 Received: from fw2.prolan.hu (fw2.prolan.hu [193.68.50.107]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 079F91C1F18; Thu, 28 Nov 2024 17:43:35 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=193.68.50.107 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1732815819; cv=none; b=UONNPskd3JAbODQzkSTxSnXJrijseZVZgw0CpGmM9y/Tc0STMcdi/sH6P90esMbdZs7j2BG7/0XS2DhSEdFKczTtMYn7GFkdVIriWldhLG4/uHiN/DKLjWRiqwVZeBSvJK5euMQPSdvaVFiEosdzyLs2UaeLqXa2IyEmZuS0btw= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1732815819; c=relaxed/simple; bh=sgkVaAipl364MDWth1Ng7Sm6HCEO8Toq99BZFykUEKY=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=kEn0Y2WcVXUjZqai/L+N78DwupRg+vT5qcda/+2WurNWiQbYSQ380VNSsAlrF7ezp9I5gqekbZWAaY+n0MRpMnp70hNSpuWgh+mC0kbkP8RfspwjvYcSw5OSBFEKU8jBDdPkuJ1tHmlxC8CX/Iel0v8uZF6TOnoV5uVi08FTgsA= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=prolan.hu; spf=pass smtp.mailfrom=prolan.hu; dkim=pass (4096-bit key) header.d=prolan.hu header.i=@prolan.hu header.b=JipPFlzz; arc=none smtp.client-ip=193.68.50.107 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=prolan.hu Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=prolan.hu Authentication-Results: smtp.subspace.kernel.org; dkim=pass (4096-bit key) header.d=prolan.hu header.i=@prolan.hu header.b="JipPFlzz" Received: from proxmox-mailgw.intranet.prolan.hu (localhost.localdomain [127.0.0.1]) by proxmox-mailgw.intranet.prolan.hu (Proxmox) with ESMTP id 07DACA0992; Thu, 28 Nov 2024 18:43:27 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=prolan.hu; h=cc :cc:content-transfer-encoding:content-type:content-type:date :from:from:in-reply-to:message-id:mime-version:references :reply-to:subject:subject:to:to; s=mail; bh=mI3E1QbKsQ6zwFtR8gA2 xYeQ60WrnrvjMqTOqprzhfw=; b=JipPFlzztRbuM6TuJN04Mv7MC+m1WGcIjqOR kVV8MNqjJZLu0ZcvvoLCdSHJlaCZ0ydyhVm+w8foopOEPliWFyn8tkmf4QsWmssU 1lVTQRlSu7RvTDd02K4OkbLDRSaxeANAfKSj+1BTsCYXgl8olnNZU3WpzLl9LxMd 8mZwe7rcMGadXbEgG7g86rPWKdAx5K1KgSkcpN7tv6AIAyB9+mI92DUuv2t0PO9U ZWRDKW4r6rVyU9sb1Y4H72gMzWvUGUmBy5NNtKPzq4QOTIoG/VOibhD7ugRyfBQ/ FUIrztErMSbEH8ErAt1Zs8VIo4mSIXfRwGsFTqba4NAd4sCq1ql/lT+zZeyBcO1q fYUTsqJdUjmnOVq0ZAGYMskzV+Z5nABB8KqeY16WWqt+SH2oWaYg1jlpmkByL80K 2WandxuYxGeay02JZwvl8Vap5BWrfNvPxelyXk4kVQFv0Er6ikiQAVjCZRNOMUvh 45YNispf8JiwMEKGhIXcHwLeuQJ9OeSos2i4dR2V41pQnb5NUfjI1ZsGVIwDV8aw eFuTlZJMFQJUoKxvOqfbWVWE/kOWtoVHW60sySl2dToxRLAmlbKHmZjmL+z3ag9p E2Ccnf5+a9uxjjuBrPGhLUSuL7cgD0q0u63wqOFca/KongWzsGESEyqZibEvGUTA 0qySlAo= From: =?utf-8?b?Q3PDs2vDoXMsIEJlbmNl?= To: , , CC: Tudor Ambarus , Varshini Rajendran , =?utf-8?b?Q3PDs2s=?= =?utf-8?b?w6FzLCBCZW5jZQ==?= , Mark Brown , Nicolas Ferre , Alexandre Belloni , Claudiu Beznea Subject: [PATCH v3 2/2] spi: atmel-quadspi: Add support for sama7g5 QSPI Date: Thu, 28 Nov 2024 18:43:15 +0100 Message-ID: <20241128174316.3209354-3-csokas.bence@prolan.hu> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20241128174316.3209354-1-csokas.bence@prolan.hu> References: <20241128174316.3209354-1-csokas.bence@prolan.hu> Precedence: bulk X-Mailing-List: linux-spi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ESET-AS: R=OK; S=0; OP=CALC; TIME=1732815803; VERSION=7982; MC=3704166096; ID=123206; TRN=0; CRV=0; IPC=; SP=0; SIPS=0; PI=3; F=0 X-ESET-Antispam: OK X-EsetResult: clean, is OK X-EsetId: 37303A29ACD94855637665 From: Tudor Ambarus The sama7g5 QSPI controller uses dedicated clocks for the QSPI Controller Interface and the QSPI Controller Core, and requires synchronization before accessing registers or bit fields. QSPI_SR.SYNCBSY must be zero before accessing any of the bits: QSPI_CR.QSPIEN, QSPI_CR.QSPIDIS, QSPI_CR.SRFRSH, QSPI_CR.SWRST, QSPI_CR.UPDCFG, QSPI_CR.STTFR, QSPI_CR.RTOUT, QSPI_CR.LASTXFER. Also, the QSPI controller core configuration can be updated by writing the QSPI_CR.UPDCFG bit to ‘1’. This is needed by the following registers: QSPI_MR, QSPI_SCR, QSPI_IAR, QSPI_WICR, QSPI_IFR, QSPI_RICR, QSPI_SMR, QSPI_SKR,QSPI_REFRESH, QSPI_WRACNT QSPI_PCALCFG. The Octal SPI supports frequencies up to 200 MHZ DDR. The need for output impedance calibration arises. To avoid the degradation of the signal quality, a PAD calibration cell is used to adjust the output impedance to the driven I/Os. The transmission flow requires different sequences for setting the configuration and for the actual transfer, than what is in the sama5d2 and sam9x60 versions of the IP. Different interrupts are handled. aq->ops->set_cfg() and aq->ops->transfer() are introduced to help differentiating the flows. Tested single and octal SPI mode with mx66lm1g45g. Signed-off-by: Tudor Ambarus Link: https://lore.kernel.org/r/20211214133404.121739-1-tudor.ambarus@microchip.com [varshini.rajendran@microchip.com: Fixed conflicts and ported to 6.1.4] Signed-off-by: Varshini Rajendran [ csokas.bence: Forward-port to master and address feedback ] Signed-off-by: Csókás, Bence --- drivers/spi/atmel-quadspi.c | 816 +++++++++++++++++++++++++++++++++++- 1 file changed, 798 insertions(+), 18 deletions(-) diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c index c84aefa03ae8..dfb8e36687e8 100644 --- a/drivers/spi/atmel-quadspi.c +++ b/drivers/spi/atmel-quadspi.c @@ -11,11 +11,15 @@ * This driver is based on drivers/mtd/spi-nor/fsl-quadspi.c from Freescale. */ +#include #include #include +#include +#include #include #include #include +#include #include #include #include @@ -34,6 +38,7 @@ #define QSPI_IDR 0x0018 /* Interrupt Disable Register */ #define QSPI_IMR 0x001c /* Interrupt Mask Register */ #define QSPI_SCR 0x0020 /* Serial Clock Register */ +#define QSPI_SR2 0x0024 /* SAMA7G5 Status Register */ #define QSPI_IAR 0x0030 /* Instruction Address Register */ #define QSPI_ICR 0x0034 /* Instruction Code Register */ @@ -44,16 +49,32 @@ #define QSPI_SMR 0x0040 /* Scrambling Mode Register */ #define QSPI_SKR 0x0044 /* Scrambling Key Register */ +#define QSPI_REFRESH 0x0050 /* Refresh Register */ +#define QSPI_WRACNT 0x0054 /* Write Access Counter Register */ +#define QSPI_DLLCFG 0x0058 /* DLL Configuration Register */ +#define QSPI_PCALCFG 0x005C /* Pad Calibration Configuration Register */ +#define QSPI_PCALBP 0x0060 /* Pad Calibration Bypass Register */ +#define QSPI_TOUT 0x0064 /* Timeout Register */ + #define QSPI_WPMR 0x00E4 /* Write Protection Mode Register */ #define QSPI_WPSR 0x00E8 /* Write Protection Status Register */ #define QSPI_VERSION 0x00FC /* Version Register */ +#define SAMA7G5_QSPI0_MAX_SPEED_HZ 200000000 +#define SAMA7G5_QSPI1_SDR_MAX_SPEED_HZ 133000000 /* Bitfields in QSPI_CR (Control Register) */ #define QSPI_CR_QSPIEN BIT(0) #define QSPI_CR_QSPIDIS BIT(1) +#define QSPI_CR_DLLON BIT(2) +#define QSPI_CR_DLLOFF BIT(3) +#define QSPI_CR_STPCAL BIT(4) +#define QSPI_CR_SRFRSH BIT(5) #define QSPI_CR_SWRST BIT(7) +#define QSPI_CR_UPDCFG BIT(8) +#define QSPI_CR_STTFR BIT(9) +#define QSPI_CR_RTOUT BIT(10) #define QSPI_CR_LASTXFER BIT(24) /* Bitfields in QSPI_MR (Mode Register) */ @@ -61,12 +82,14 @@ #define QSPI_MR_LLB BIT(1) #define QSPI_MR_WDRBT BIT(2) #define QSPI_MR_SMRM BIT(3) +#define QSPI_MR_DQSDLYEN BIT(3) #define QSPI_MR_CSMODE_MASK GENMASK(5, 4) #define QSPI_MR_CSMODE_NOT_RELOADED (0 << 4) #define QSPI_MR_CSMODE_LASTXFER (1 << 4) #define QSPI_MR_CSMODE_SYSTEMATICALLY (2 << 4) #define QSPI_MR_NBBITS_MASK GENMASK(11, 8) #define QSPI_MR_NBBITS(n) ((((n) - 8) << 8) & QSPI_MR_NBBITS_MASK) +#define QSPI_MR_OENSD BIT(15) #define QSPI_MR_DLYBCT_MASK GENMASK(23, 16) #define QSPI_MR_DLYBCT(n) (((n) << 16) & QSPI_MR_DLYBCT_MASK) #define QSPI_MR_DLYCS_MASK GENMASK(31, 24) @@ -80,6 +103,13 @@ #define QSPI_SR_CSR BIT(8) #define QSPI_SR_CSS BIT(9) #define QSPI_SR_INSTRE BIT(10) +#define QSPI_SR_LWRA BIT(11) +#define QSPI_SR_QITF BIT(12) +#define QSPI_SR_QITR BIT(13) +#define QSPI_SR_CSFA BIT(14) +#define QSPI_SR_CSRA BIT(15) +#define QSPI_SR_RFRSHD BIT(16) +#define QSPI_SR_TOUT BIT(17) #define QSPI_SR_QSPIENS BIT(24) #define QSPI_SR_CMD_COMPLETED (QSPI_SR_INSTRE | QSPI_SR_CSR) @@ -92,9 +122,22 @@ #define QSPI_SCR_DLYBS_MASK GENMASK(23, 16) #define QSPI_SCR_DLYBS(n) (((n) << 16) & QSPI_SCR_DLYBS_MASK) +/* Bitfields in QSPI_SR2 (SAMA7G5 Status Register) */ +#define QSPI_SR2_SYNCBSY BIT(0) +#define QSPI_SR2_QSPIENS BIT(1) +#define QSPI_SR2_CSS BIT(2) +#define QSPI_SR2_RBUSY BIT(3) +#define QSPI_SR2_HIDLE BIT(4) +#define QSPI_SR2_DLOCK BIT(5) +#define QSPI_SR2_CALBSY BIT(6) + +/* Bitfields in QSPI_IAR (Instruction Address Register) */ +#define QSPI_IAR_ADDR GENMASK(31, 0) + /* Bitfields in QSPI_ICR (Read/Write Instruction Code Register) */ #define QSPI_ICR_INST_MASK GENMASK(7, 0) #define QSPI_ICR_INST(inst) (((inst) << 0) & QSPI_ICR_INST_MASK) +#define QSPI_ICR_INST_MASK_SAMA7G5 GENMASK(15, 0) #define QSPI_ICR_OPT_MASK GENMASK(23, 16) #define QSPI_ICR_OPT(opt) (((opt) << 16) & QSPI_ICR_OPT_MASK) @@ -107,6 +150,9 @@ #define QSPI_IFR_WIDTH_QUAD_IO (4 << 0) #define QSPI_IFR_WIDTH_DUAL_CMD (5 << 0) #define QSPI_IFR_WIDTH_QUAD_CMD (6 << 0) +#define QSPI_IFR_WIDTH_OCT_OUTPUT (7 << 0) +#define QSPI_IFR_WIDTH_OCT_IO (8 << 0) +#define QSPI_IFR_WIDTH_OCT_CMD (9 << 0) #define QSPI_IFR_INSTEN BIT(4) #define QSPI_IFR_ADDREN BIT(5) #define QSPI_IFR_OPTEN BIT(6) @@ -117,19 +163,60 @@ #define QSPI_IFR_OPTL_4BIT (2 << 8) #define QSPI_IFR_OPTL_8BIT (3 << 8) #define QSPI_IFR_ADDRL BIT(10) +#define QSPI_IFR_ADDRL_SAMA7G5 GENMASK(11, 10) #define QSPI_IFR_TFRTYP_MEM BIT(12) #define QSPI_IFR_SAMA5D2_WRITE_TRSFR BIT(13) #define QSPI_IFR_CRM BIT(14) +#define QSPI_IFR_DDREN BIT(15) #define QSPI_IFR_NBDUM_MASK GENMASK(20, 16) #define QSPI_IFR_NBDUM(n) (((n) << 16) & QSPI_IFR_NBDUM_MASK) +#define QSPI_IFR_END BIT(22) +#define QSPI_IFR_SMRM BIT(23) #define QSPI_IFR_APBTFRTYP_READ BIT(24) /* Defined in SAM9X60 */ +#define QSPI_IFR_DQSEN BIT(25) +#define QSPI_IFR_DDRCMDEN BIT(26) +#define QSPI_IFR_HFWBEN BIT(27) +#define QSPI_IFR_PROTTYP GENMASK(29, 28) +#define QSPI_IFR_PROTTYP_STD_SPI 0 +#define QSPI_IFR_PROTTYP_TWIN_QUAD 1 +#define QSPI_IFR_PROTTYP_OCTAFLASH 2 +#define QSPI_IFR_PROTTYP_HYPERFLASH 3 /* Bitfields in QSPI_SMR (Scrambling Mode Register) */ #define QSPI_SMR_SCREN BIT(0) #define QSPI_SMR_RVDIS BIT(1) +#define QSPI_SMR_SCRKL BIT(2) + +/* Bitfields in QSPI_REFRESH (Refresh Register) */ +#define QSPI_REFRESH_DELAY_COUNTER GENMASK(31, 0) + +/* Bitfields in QSPI_WRACNT (Write Access Counter Register) */ +#define QSPI_WRACNT_NBWRA GENMASK(31, 0) + +/* Bitfields in QSPI_DLLCFG (DLL Configuration Register) */ +#define QSPI_DLLCFG_RANGE BIT(0) + +/* Bitfields in QSPI_PCALCFG (DLL Pad Calibration Configuration Register) */ +#define QSPI_PCALCFG_AAON BIT(0) +#define QSPI_PCALCFG_DAPCAL BIT(1) +#define QSPI_PCALCFG_DIFFPM BIT(2) +#define QSPI_PCALCFG_CLKDIV GENMASK(6, 4) +#define QSPI_PCALCFG_CALCNT GENMASK(16, 8) +#define QSPI_PCALCFG_CALP GENMASK(27, 24) +#define QSPI_PCALCFG_CALN GENMASK(31, 28) + +/* Bitfields in QSPI_PCALBP (DLL Pad Calibration Bypass Register) */ +#define QSPI_PCALBP_BPEN BIT(0) +#define QSPI_PCALBP_CALPBP GENMASK(11, 8) +#define QSPI_PCALBP_CALNBP GENMASK(19, 16) + +/* Bitfields in QSPI_TOUT (Timeout Register) */ +#define QSPI_TOUT_TCNTM GENMASK(15, 0) /* Bitfields in QSPI_WPMR (Write Protection Mode Register) */ #define QSPI_WPMR_WPEN BIT(0) +#define QSPI_WPMR_WPITEN BIT(1) +#define QSPI_WPMR_WPCREN BIT(2) #define QSPI_WPMR_WPKEY_MASK GENMASK(31, 8) #define QSPI_WPMR_WPKEY(wpkey) (((wpkey) << 8) & QSPI_WPMR_WPKEY_MASK) @@ -139,10 +226,42 @@ #define QSPI_WPSR_WPVSRC(src) (((src) << 8) & QSPI_WPSR_WPVSRC) #define ATMEL_QSPI_TIMEOUT 1000 /* ms */ +#define ATMEL_QSPI_SYNC_TIMEOUT 300 /* ms */ +#define QSPI_DLLCFG_THRESHOLD_FREQ 90000000U +#define QSPI_CALIB_TIME 2000 /* 2 us */ + +/* Use PIO for small transfers. */ +#define ATMEL_QSPI_DMA_MIN_BYTES 16 +/** + * struct atmel_qspi_pcal - Pad Calibration Clock Division + * @pclk_rate: peripheral clock rate. + * @pclkdiv: calibration clock division. The clock applied to the calibration + * cell is divided by pclkdiv + 1. + */ +struct atmel_qspi_pcal { + u32 pclk_rate; + u8 pclk_div; +}; + +#define ATMEL_QSPI_PCAL_ARRAY_SIZE 8 +static const struct atmel_qspi_pcal pcal[ATMEL_QSPI_PCAL_ARRAY_SIZE] = { + {25000000, 0}, + {50000000, 1}, + {75000000, 2}, + {100000000, 3}, + {125000000, 4}, + {150000000, 5}, + {175000000, 6}, + {200000000, 7}, +}; struct atmel_qspi_caps { + u32 max_speed_hz; bool has_qspick; + bool has_gclk; bool has_ricr; + bool octal; + bool has_dma; }; struct atmel_qspi_ops; @@ -152,6 +271,7 @@ struct atmel_qspi { void __iomem *mem; struct clk *pclk; struct clk *qspick; + struct clk *gclk; struct platform_device *pdev; const struct atmel_qspi_caps *caps; const struct atmel_qspi_ops *ops; @@ -160,7 +280,12 @@ struct atmel_qspi { u32 irq_mask; u32 mr; u32 scr; + u32 slave_max_speed_hz; struct completion cmd_completion; + struct completion dma_completion; + dma_addr_t mmap_phys_base; + struct dma_chan *rx_chan; + struct dma_chan *tx_chan; }; struct atmel_qspi_ops { @@ -187,6 +312,19 @@ static const struct atmel_qspi_mode atmel_qspi_modes[] = { { 4, 4, 4, QSPI_IFR_WIDTH_QUAD_CMD }, }; +static const struct atmel_qspi_mode atmel_qspi_sama7g5_modes[] = { + { 1, 1, 1, QSPI_IFR_WIDTH_SINGLE_BIT_SPI }, + { 1, 1, 2, QSPI_IFR_WIDTH_DUAL_OUTPUT }, + { 1, 1, 4, QSPI_IFR_WIDTH_QUAD_OUTPUT }, + { 1, 2, 2, QSPI_IFR_WIDTH_DUAL_IO }, + { 1, 4, 4, QSPI_IFR_WIDTH_QUAD_IO }, + { 2, 2, 2, QSPI_IFR_WIDTH_DUAL_CMD }, + { 4, 4, 4, QSPI_IFR_WIDTH_QUAD_CMD }, + { 1, 1, 8, QSPI_IFR_WIDTH_OCT_OUTPUT }, + { 1, 8, 8, QSPI_IFR_WIDTH_OCT_IO }, + { 8, 8, 8, QSPI_IFR_WIDTH_OCT_CMD }, +}; + #ifdef VERBOSE_DEBUG static const char *atmel_qspi_reg_name(u32 offset, char *tmp, size_t sz) { @@ -209,6 +347,8 @@ static const char *atmel_qspi_reg_name(u32 offset, char *tmp, size_t sz) return "IMR"; case QSPI_SCR: return "SCR"; + case QSPI_SR2: + return "SR2"; case QSPI_IAR: return "IAR"; case QSPI_ICR: @@ -221,6 +361,18 @@ static const char *atmel_qspi_reg_name(u32 offset, char *tmp, size_t sz) return "SMR"; case QSPI_SKR: return "SKR"; + case QSPI_REFRESH: + return "REFRESH"; + case QSPI_WRACNT: + return "WRACNT"; + case QSPI_DLLCFG: + return "DLLCFG"; + case QSPI_PCALCFG: + return "PCALCFG"; + case QSPI_PCALBP: + return "PCALBP"; + case QSPI_TOUT: + return "TOUT"; case QSPI_WPMR: return "WPMR"; case QSPI_WPSR: @@ -288,12 +440,31 @@ static int atmel_qspi_find_mode(const struct spi_mem_op *op) return -EOPNOTSUPP; } +static int atmel_qspi_sama7g5_find_mode(const struct spi_mem_op *op) +{ + u32 i; + + for (i = 0; i < ARRAY_SIZE(atmel_qspi_sama7g5_modes); i++) + if (atmel_qspi_is_compatible(op, &atmel_qspi_sama7g5_modes[i])) + return i; + + return -EOPNOTSUPP; +} + static bool atmel_qspi_supports_op(struct spi_mem *mem, const struct spi_mem_op *op) { + struct atmel_qspi *aq = spi_controller_get_devdata(mem->spi->controller); if (!spi_mem_default_supports_op(mem, op)) return false; + if (aq->caps->octal) { + if (atmel_qspi_sama7g5_find_mode(op) < 0) + return false; + else + return true; + } + if (atmel_qspi_find_mode(op) < 0) return false; @@ -467,6 +638,296 @@ static int atmel_qspi_transfer(struct spi_mem *mem, return atmel_qspi_wait_for_completion(aq, QSPI_SR_CMD_COMPLETED); } +static int atmel_qspi_reg_sync(struct atmel_qspi *aq) +{ + u32 val; + int ret; + + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + !(val & QSPI_SR2_SYNCBSY), 40, + ATMEL_QSPI_SYNC_TIMEOUT); + return ret; +} + +static int atmel_qspi_update_config(struct atmel_qspi *aq) +{ + int ret; + + ret = atmel_qspi_reg_sync(aq); + if (ret) + return ret; + atmel_qspi_write(QSPI_CR_UPDCFG, aq, QSPI_CR); + return atmel_qspi_reg_sync(aq); +} + +static int atmel_qspi_sama7g5_set_cfg(struct atmel_qspi *aq, + const struct spi_mem_op *op, u32 *offset) +{ + u32 iar, icr, ifr; + int mode, ret; + + iar = 0; + icr = FIELD_PREP(QSPI_ICR_INST_MASK_SAMA7G5, op->cmd.opcode); + ifr = QSPI_IFR_INSTEN; + + mode = atmel_qspi_sama7g5_find_mode(op); + if (mode < 0) + return mode; + ifr |= atmel_qspi_sama7g5_modes[mode].config; + + if (op->dummy.buswidth && op->dummy.nbytes) { + if (op->addr.dtr && op->dummy.dtr && op->data.dtr) + ifr |= QSPI_IFR_NBDUM(op->dummy.nbytes * 8 / + (2 * op->dummy.buswidth)); + else + ifr |= QSPI_IFR_NBDUM(op->dummy.nbytes * 8 / + op->dummy.buswidth); + } + + if (op->addr.buswidth && op->addr.nbytes) { + ifr |= FIELD_PREP(QSPI_IFR_ADDRL_SAMA7G5, op->addr.nbytes - 1) | + QSPI_IFR_ADDREN; + iar = FIELD_PREP(QSPI_IAR_ADDR, op->addr.val); + } + + if (op->addr.dtr && op->dummy.dtr && op->data.dtr) { + ifr |= QSPI_IFR_DDREN; + if (op->cmd.dtr) + ifr |= QSPI_IFR_DDRCMDEN; + + ifr |= QSPI_IFR_DQSEN; + } + + if (op->cmd.buswidth == 8 || op->addr.buswidth == 8 || + op->data.buswidth == 8) + ifr |= FIELD_PREP(QSPI_IFR_PROTTYP, QSPI_IFR_PROTTYP_OCTAFLASH); + + /* offset of the data access in the QSPI memory space */ + *offset = iar; + + /* Set data enable */ + if (op->data.nbytes) { + ifr |= QSPI_IFR_DATAEN; + + if (op->addr.nbytes) + ifr |= QSPI_IFR_TFRTYP_MEM; + } + + /* + * If the QSPI controller is set in regular SPI mode, set it in + * Serial Memory Mode (SMM). + */ + if (aq->mr != QSPI_MR_SMM) { + atmel_qspi_write(QSPI_MR_SMM | QSPI_MR_DQSDLYEN, aq, QSPI_MR); + aq->mr = QSPI_MR_SMM; + + ret = atmel_qspi_update_config(aq); + if (ret) + return ret; + } + + /* Clear pending interrupts */ + (void)atmel_qspi_read(aq, QSPI_SR); + + /* Set QSPI Instruction Frame registers */ + if (op->addr.nbytes && !op->data.nbytes) + atmel_qspi_write(iar, aq, QSPI_IAR); + + if (op->data.dir == SPI_MEM_DATA_IN) { + atmel_qspi_write(icr, aq, QSPI_RICR); + } else { + atmel_qspi_write(icr, aq, QSPI_WICR); + if (op->data.nbytes) + atmel_qspi_write(FIELD_PREP(QSPI_WRACNT_NBWRA, + op->data.nbytes), + aq, QSPI_WRACNT); + } + + atmel_qspi_write(ifr, aq, QSPI_IFR); + + return atmel_qspi_update_config(aq); +} + +static void atmel_qspi_dma_callback(void *param) +{ + struct atmel_qspi *aq = param; + + complete(&aq->dma_completion); +} + +static int atmel_qspi_dma_xfer(struct atmel_qspi *aq, struct dma_chan *chan, + dma_addr_t dma_dst, dma_addr_t dma_src, + unsigned int len) +{ + struct dma_async_tx_descriptor *tx; + dma_cookie_t cookie; + int ret; + + tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!tx) { + dev_err(&aq->pdev->dev, "device_prep_dma_memcpy error\n"); + return -EIO; + } + + reinit_completion(&aq->dma_completion); + tx->callback = atmel_qspi_dma_callback; + tx->callback_param = aq; + cookie = tx->tx_submit(tx); + ret = dma_submit_error(cookie); + if (ret) { + dev_err(&aq->pdev->dev, "dma_submit_error %d\n", cookie); + return ret; + } + + dma_async_issue_pending(chan); + ret = wait_for_completion_timeout(&aq->dma_completion, + msecs_to_jiffies(20 * ATMEL_QSPI_TIMEOUT)); + if (ret == 0) { + dmaengine_terminate_sync(chan); + dev_err(&aq->pdev->dev, "DMA wait_for_completion_timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int atmel_qspi_dma_rx_xfer(struct spi_mem *mem, + const struct spi_mem_op *op, + struct sg_table *sgt, loff_t loff) +{ + struct atmel_qspi *aq = + spi_controller_get_devdata(mem->spi->controller); + struct scatterlist *sg; + dma_addr_t dma_src; + unsigned int i, len; + int ret; + + dma_src = aq->mmap_phys_base + loff; + + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + len = sg_dma_len(sg); + ret = atmel_qspi_dma_xfer(aq, aq->rx_chan, sg_dma_address(sg), + dma_src, len); + if (ret) + return ret; + dma_src += len; + } + + return 0; +} + +static int atmel_qspi_dma_tx_xfer(struct spi_mem *mem, + const struct spi_mem_op *op, + struct sg_table *sgt, loff_t loff) +{ + struct atmel_qspi *aq = + spi_controller_get_devdata(mem->spi->controller); + struct scatterlist *sg; + dma_addr_t dma_dst; + unsigned int i, len; + int ret; + + dma_dst = aq->mmap_phys_base + loff; + + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + len = sg_dma_len(sg); + ret = atmel_qspi_dma_xfer(aq, aq->tx_chan, dma_dst, + sg_dma_address(sg), len); + if (ret) + return ret; + dma_dst += len; + } + + return 0; +} + +static int atmel_qspi_dma_transfer(struct spi_mem *mem, + const struct spi_mem_op *op, loff_t loff) +{ + struct sg_table sgt; + int ret; + + ret = spi_controller_dma_map_mem_op_data(mem->spi->controller, op, + &sgt); + if (ret) + return ret; + + if (op->data.dir == SPI_MEM_DATA_IN) + ret = atmel_qspi_dma_rx_xfer(mem, op, &sgt, loff); + else + ret = atmel_qspi_dma_tx_xfer(mem, op, &sgt, loff); + + spi_controller_dma_unmap_mem_op_data(mem->spi->controller, op, &sgt); + + return ret; +} + +static int atmel_qspi_sama7g5_transfer(struct spi_mem *mem, + const struct spi_mem_op *op, u32 offset) +{ + struct atmel_qspi *aq = + spi_controller_get_devdata(mem->spi->controller); + u32 val; + int ret; + + if (!op->data.nbytes) { + /* Start the transfer. */ + ret = atmel_qspi_reg_sync(aq); + if (ret) + return ret; + atmel_qspi_write(QSPI_CR_STTFR, aq, QSPI_CR); + + return atmel_qspi_wait_for_completion(aq, QSPI_SR_CSRA); + } + + /* Send/Receive data. */ + if (op->data.dir == SPI_MEM_DATA_IN) { + if (aq->rx_chan && op->addr.nbytes && + op->data.nbytes > ATMEL_QSPI_DMA_MIN_BYTES) { + ret = atmel_qspi_dma_transfer(mem, op, offset); + if (ret) + return ret; + } else { + memcpy_fromio(op->data.buf.in, aq->mem + offset, + op->data.nbytes); + } + + if (op->addr.nbytes) { + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + !(val & QSPI_SR2_RBUSY), 40, + ATMEL_QSPI_SYNC_TIMEOUT); + if (ret) + return ret; + } + } else { + if (aq->tx_chan && op->addr.nbytes && + op->data.nbytes > ATMEL_QSPI_DMA_MIN_BYTES) { + ret = atmel_qspi_dma_transfer(mem, op, offset); + if (ret) + return ret; + } else { + memcpy_toio(aq->mem + offset, op->data.buf.out, + op->data.nbytes); + } + + ret = atmel_qspi_wait_for_completion(aq, QSPI_SR_LWRA); + if (ret) + return ret; + } + + /* Release the chip-select. */ + ret = atmel_qspi_reg_sync(aq); + if (ret) { + pm_runtime_mark_last_busy(&aq->pdev->dev); + pm_runtime_put_autosuspend(&aq->pdev->dev); + return ret; + } + atmel_qspi_write(QSPI_CR_LASTXFER, aq, QSPI_CR); + + return atmel_qspi_wait_for_completion(aq, QSPI_SR_CSRA); +} + static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) { struct atmel_qspi *aq = spi_controller_get_devdata(mem->spi->controller); @@ -511,6 +972,160 @@ static const struct spi_controller_mem_ops atmel_qspi_mem_ops = { .get_name = atmel_qspi_get_name }; +static int atmel_qspi_set_pad_calibration(struct atmel_qspi *aq) +{ + unsigned long pclk_rate; + u32 status, val; + int i, ret; + u8 pclk_div = 0; + + pclk_rate = clk_get_rate(aq->pclk); + if (!pclk_rate) + return -EINVAL; + + for (i = 0; i < ATMEL_QSPI_PCAL_ARRAY_SIZE; i++) { + if (pclk_rate <= pcal[i].pclk_rate) { + pclk_div = pcal[i].pclk_div; + break; + } + } + + /* + * Use the biggest divider in case the peripheral clock exceeds + * 200MHZ. + */ + if (pclk_rate > pcal[ATMEL_QSPI_PCAL_ARRAY_SIZE - 1].pclk_rate) + pclk_div = pcal[ATMEL_QSPI_PCAL_ARRAY_SIZE - 1].pclk_div; + + /* Disable QSPI while configuring the pad calibration. */ + status = atmel_qspi_read(aq, QSPI_SR2); + if (status & QSPI_SR2_QSPIENS) { + ret = atmel_qspi_reg_sync(aq); + if (ret) + return ret; + atmel_qspi_write(QSPI_CR_QSPIDIS, aq, QSPI_CR); + } + + /* + * The analog circuitry is not shut down at the end of the calibration + * and the start-up time is only required for the first calibration + * sequence, thus increasing performance. Set the delay between the Pad + * calibration analog circuitry and the calibration request to 2us. + */ + atmel_qspi_write(QSPI_PCALCFG_AAON | + FIELD_PREP(QSPI_PCALCFG_CLKDIV, pclk_div) | + FIELD_PREP(QSPI_PCALCFG_CALCNT, + 2 * (pclk_rate / 1000000)), + aq, QSPI_PCALCFG); + + /* DLL On + start calibration. */ + atmel_qspi_write(QSPI_CR_DLLON | QSPI_CR_STPCAL, aq, QSPI_CR); + + /* Check synchronization status before updating configuration. */ + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + (val & QSPI_SR2_DLOCK) && + !(val & QSPI_SR2_CALBSY), 40, + ATMEL_QSPI_TIMEOUT); + + /* Refresh analogic blocks every 1 ms.*/ + atmel_qspi_write(FIELD_PREP(QSPI_REFRESH_DELAY_COUNTER, + aq->slave_max_speed_hz / 1000), + aq, QSPI_REFRESH); + + return ret; +} + +static int atmel_qspi_set_gclk(struct atmel_qspi *aq) +{ + u32 status, val; + int ret; + + /* Disable DLL before setting GCLK */ + status = atmel_qspi_read(aq, QSPI_SR2); + if (status & QSPI_SR2_DLOCK) { + atmel_qspi_write(QSPI_CR_DLLOFF, aq, QSPI_CR); + + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + !(val & QSPI_SR2_DLOCK), 40, + ATMEL_QSPI_TIMEOUT); + if (ret) + return ret; + } + + if (aq->slave_max_speed_hz > QSPI_DLLCFG_THRESHOLD_FREQ) + atmel_qspi_write(QSPI_DLLCFG_RANGE, aq, QSPI_DLLCFG); + else + atmel_qspi_write(0, aq, QSPI_DLLCFG); + + ret = clk_set_rate(aq->gclk, aq->slave_max_speed_hz); + if (ret) { + dev_err(&aq->pdev->dev, "Failed to set generic clock rate.\n"); + return ret; + } + + /* Enable the QSPI generic clock */ + ret = clk_prepare_enable(aq->gclk); + if (ret) + dev_err(&aq->pdev->dev, "Failed to enable generic clock.\n"); + + return ret; +} + +static int atmel_qspi_sama7g5_init(struct atmel_qspi *aq) +{ + u32 val; + int ret; + + ret = atmel_qspi_set_gclk(aq); + if (ret) + return ret; + + if (aq->caps->octal) { + ret = atmel_qspi_set_pad_calibration(aq); + if (ret) + return ret; + } else { + atmel_qspi_write(QSPI_CR_DLLON, aq, QSPI_CR); + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + (val & QSPI_SR2_DLOCK), 40, + ATMEL_QSPI_TIMEOUT); + } + + /* Set the QSPI controller by default in Serial Memory Mode */ + atmel_qspi_write(QSPI_MR_SMM | QSPI_MR_DQSDLYEN, aq, QSPI_MR); + aq->mr = QSPI_MR_SMM; + ret = atmel_qspi_update_config(aq); + if (ret) + return ret; + + /* Enable the QSPI controller. */ + atmel_qspi_write(QSPI_CR_QSPIEN, aq, QSPI_CR); + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + val & QSPI_SR2_QSPIENS, 40, + ATMEL_QSPI_SYNC_TIMEOUT); + if (ret) + return ret; + + if (aq->caps->octal) { + ret = readl_poll_timeout(aq->regs + QSPI_SR, val, + val & QSPI_SR_RFRSHD, 40, + ATMEL_QSPI_TIMEOUT); + } + + atmel_qspi_write(QSPI_TOUT_TCNTM, aq, QSPI_TOUT); + return ret; +} + +static int atmel_qspi_sama7g5_setup(struct spi_device *spi) +{ + struct atmel_qspi *aq = spi_controller_get_devdata(spi->controller); + + /* The controller can communicate with a single slave. */ + aq->slave_max_speed_hz = spi->max_speed_hz; + + return atmel_qspi_sama7g5_init(aq); +} + static int atmel_qspi_setup(struct spi_device *spi) { struct spi_controller *ctrl = spi->controller; @@ -525,6 +1140,9 @@ static int atmel_qspi_setup(struct spi_device *spi) if (!spi->max_speed_hz) return -EINVAL; + if (aq->caps->has_gclk) + return atmel_qspi_sama7g5_setup(spi); + src_rate = clk_get_rate(aq->pclk); if (!src_rate) return -EINVAL; @@ -610,8 +1228,18 @@ static int atmel_qspi_set_cs_timing(struct spi_device *spi) return 0; } -static void atmel_qspi_init(struct atmel_qspi *aq) +static int atmel_qspi_init(struct atmel_qspi *aq) { + int ret; + + if (aq->caps->has_gclk) { + ret = atmel_qspi_reg_sync(aq); + if (ret) + return ret; + atmel_qspi_write(QSPI_CR_SWRST, aq, QSPI_CR); + return 0; + } + /* Reset the QSPI controller */ atmel_qspi_write(QSPI_CR_SWRST, aq, QSPI_CR); @@ -621,6 +1249,7 @@ static void atmel_qspi_init(struct atmel_qspi *aq) /* Enable the QSPI controller */ atmel_qspi_write(QSPI_CR_QSPIEN, aq, QSPI_CR); + return 0; } static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id) @@ -642,11 +1271,59 @@ static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +static int atmel_qspi_dma_init(struct spi_controller *ctrl) +{ + struct atmel_qspi *aq = spi_controller_get_devdata(ctrl); + int ret; + + aq->rx_chan = dma_request_chan(&aq->pdev->dev, "rx"); + if (IS_ERR(aq->rx_chan)) { + aq->rx_chan = NULL; + return dev_err_probe(&aq->pdev->dev, PTR_ERR(aq->rx_chan), + "RX DMA channel is not available\n"); + } + + aq->tx_chan = dma_request_chan(&aq->pdev->dev, "tx"); + if (IS_ERR(aq->tx_chan)) { + ret = dev_err_probe(&aq->pdev->dev, PTR_ERR(aq->tx_chan), + "TX DMA channel is not available\n"); + goto release_rx_chan; + } + + ctrl->dma_rx = aq->rx_chan; + ctrl->dma_tx = aq->tx_chan; + init_completion(&aq->dma_completion); + + dev_info(&aq->pdev->dev, "Using %s (tx) and %s (rx) for DMA transfers\n", + dma_chan_name(aq->tx_chan), dma_chan_name(aq->rx_chan)); + + return 0; + +release_rx_chan: + dma_release_channel(aq->rx_chan); + aq->rx_chan = NULL; + aq->tx_chan = NULL; + return ret; +} + +static void atmel_qspi_dma_release(struct atmel_qspi *aq) +{ + if (aq->rx_chan) + dma_release_channel(aq->rx_chan); + if (aq->tx_chan) + dma_release_channel(aq->tx_chan); +} + static const struct atmel_qspi_ops atmel_qspi_ops = { .set_cfg = atmel_qspi_set_cfg, .transfer = atmel_qspi_transfer, }; +static const struct atmel_qspi_ops atmel_qspi_sama7g5_ops = { + .set_cfg = atmel_qspi_sama7g5_set_cfg, + .transfer = atmel_qspi_sama7g5_transfer, +}; + static int atmel_qspi_probe(struct platform_device *pdev) { struct spi_controller *ctrl; @@ -658,7 +1335,27 @@ static int atmel_qspi_probe(struct platform_device *pdev) if (!ctrl) return -ENOMEM; + aq = spi_controller_get_devdata(ctrl); + + aq->caps = of_device_get_match_data(&pdev->dev); + if (!aq->caps) { + dev_err(&pdev->dev, "Could not retrieve QSPI caps\n"); + return -EINVAL; + } + + init_completion(&aq->cmd_completion); + aq->pdev = pdev; + ctrl->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD; + if (aq->caps->octal) + ctrl->mode_bits |= SPI_RX_OCTAL | SPI_TX_OCTAL; + + if (aq->caps->has_gclk) + aq->ops = &atmel_qspi_sama7g5_ops; + else + aq->ops = &atmel_qspi_ops; + + ctrl->max_speed_hz = aq->caps->max_speed_hz; ctrl->setup = atmel_qspi_setup; ctrl->set_cs_timing = atmel_qspi_set_cs_timing; ctrl->bus_num = -1; @@ -667,12 +1364,6 @@ static int atmel_qspi_probe(struct platform_device *pdev) ctrl->dev.of_node = pdev->dev.of_node; platform_set_drvdata(pdev, ctrl); - aq = spi_controller_get_devdata(ctrl); - - init_completion(&aq->cmd_completion); - aq->pdev = pdev; - aq->ops = &atmel_qspi_ops; - /* Map the registers */ aq->regs = devm_platform_ioremap_resource_byname(pdev, "qspi_base"); if (IS_ERR(aq->regs)) @@ -687,6 +1378,7 @@ static int atmel_qspi_probe(struct platform_device *pdev) "missing AHB memory\n"); aq->mmap_size = resource_size(res); + aq->mmap_phys_base = (dma_addr_t)res->start; /* Get the peripheral clock */ aq->pclk = devm_clk_get(&pdev->dev, "pclk"); @@ -703,13 +1395,6 @@ static int atmel_qspi_probe(struct platform_device *pdev) return dev_err_probe(&pdev->dev, err, "failed to enable the peripheral clock\n"); - aq->caps = of_device_get_match_data(&pdev->dev); - if (!aq->caps) { - dev_err(&pdev->dev, "Could not retrieve QSPI caps\n"); - err = -EINVAL; - goto disable_pclk; - } - if (aq->caps->has_qspick) { /* Get the QSPI system clock */ aq->qspick = devm_clk_get(&pdev->dev, "qspick"); @@ -726,18 +1411,32 @@ static int atmel_qspi_probe(struct platform_device *pdev) "failed to enable the QSPI system clock\n"); goto disable_pclk; } + } else if (aq->caps->has_gclk) { + /* Get the QSPI generic clock */ + aq->gclk = devm_clk_get(&pdev->dev, "gclk"); + if (IS_ERR(aq->gclk)) { + dev_err(&pdev->dev, "missing Generic clock\n"); + err = PTR_ERR(aq->gclk); + goto disable_pclk; + } + } + + if (aq->caps->has_dma) { + err = atmel_qspi_dma_init(ctrl); + if (err == -EPROBE_DEFER) + goto disable_qspick; } /* Request the IRQ */ irq = platform_get_irq(pdev, 0); if (irq < 0) { err = irq; - goto disable_qspick; + goto dma_release; } err = devm_request_irq(&pdev->dev, irq, atmel_qspi_interrupt, 0, dev_name(&pdev->dev), aq); if (err) - goto disable_qspick; + goto dma_release; pm_runtime_set_autosuspend_delay(&pdev->dev, 500); pm_runtime_use_autosuspend(&pdev->dev); @@ -745,7 +1444,9 @@ static int atmel_qspi_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); pm_runtime_get_noresume(&pdev->dev); - atmel_qspi_init(aq); + err = atmel_qspi_init(aq); + if (err) + goto dma_release; err = spi_register_controller(ctrl); if (err) { @@ -753,13 +1454,16 @@ static int atmel_qspi_probe(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); pm_runtime_dont_use_autosuspend(&pdev->dev); - goto disable_qspick; + goto dma_release; } pm_runtime_mark_last_busy(&pdev->dev); pm_runtime_put_autosuspend(&pdev->dev); return 0; +dma_release: + if (aq->caps->has_dma) + atmel_qspi_dma_release(aq); disable_qspick: clk_disable_unprepare(aq->qspick); disable_pclk: @@ -768,6 +1472,44 @@ static int atmel_qspi_probe(struct platform_device *pdev) return err; } +static int atmel_qspi_sama7g5_suspend(struct atmel_qspi *aq) +{ + int ret; + u32 val; + + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + !(val & QSPI_SR2_RBUSY) && + (val & QSPI_SR2_HIDLE), 40, + ATMEL_QSPI_SYNC_TIMEOUT); + if (ret) + return ret; + + atmel_qspi_write(QSPI_CR_QSPIDIS, aq, QSPI_CR); + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + !(val & QSPI_SR2_QSPIENS), 40, + ATMEL_QSPI_SYNC_TIMEOUT); + if (ret) + return ret; + + clk_disable_unprepare(aq->gclk); + + atmel_qspi_write(QSPI_CR_DLLOFF, aq, QSPI_CR); + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + !(val & QSPI_SR2_DLOCK), 40, + ATMEL_QSPI_TIMEOUT); + if (ret) + return ret; + + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + !(val & QSPI_SR2_CALBSY), 40, + ATMEL_QSPI_TIMEOUT); + if (ret) + return ret; + + clk_disable_unprepare(aq->pclk); + return 0; +} + static void atmel_qspi_remove(struct platform_device *pdev) { struct spi_controller *ctrl = platform_get_drvdata(pdev); @@ -778,6 +1520,16 @@ static void atmel_qspi_remove(struct platform_device *pdev) ret = pm_runtime_get_sync(&pdev->dev); if (ret >= 0) { + if (aq->caps->has_dma) + atmel_qspi_dma_release(aq); + + if (aq->caps->has_gclk) { + ret = atmel_qspi_sama7g5_suspend(aq); + if (ret) + dev_warn(&pdev->dev, "Failed to de-init device on remove: %d\n", ret); + return; + } + atmel_qspi_write(QSPI_CR_QSPIDIS, aq, QSPI_CR); clk_disable(aq->qspick); clk_disable(aq->pclk); @@ -808,6 +1560,9 @@ static int __maybe_unused atmel_qspi_suspend(struct device *dev) if (ret < 0) return ret; + if (aq->caps->has_gclk) + return atmel_qspi_sama7g5_suspend(aq); + atmel_qspi_write(QSPI_CR_QSPIDIS, aq, QSPI_CR); pm_runtime_mark_last_busy(dev); @@ -835,6 +1590,9 @@ static int __maybe_unused atmel_qspi_resume(struct device *dev) return ret; } + if (aq->caps->has_gclk) + return atmel_qspi_sama7g5_init(aq); + ret = pm_runtime_force_resume(dev); if (ret < 0) return ret; @@ -890,6 +1648,19 @@ static const struct atmel_qspi_caps atmel_sam9x60_qspi_caps = { .has_ricr = true, }; +static const struct atmel_qspi_caps atmel_sama7g5_ospi_caps = { + .max_speed_hz = SAMA7G5_QSPI0_MAX_SPEED_HZ, + .has_gclk = true, + .octal = true, + .has_dma = true, +}; + +static const struct atmel_qspi_caps atmel_sama7g5_qspi_caps = { + .max_speed_hz = SAMA7G5_QSPI1_SDR_MAX_SPEED_HZ, + .has_gclk = true, + .has_dma = true, +}; + static const struct of_device_id atmel_qspi_dt_ids[] = { { .compatible = "atmel,sama5d2-qspi", @@ -899,6 +1670,15 @@ static const struct of_device_id atmel_qspi_dt_ids[] = { .compatible = "microchip,sam9x60-qspi", .data = &atmel_sam9x60_qspi_caps, }, + { + .compatible = "microchip,sama7g5-ospi", + .data = &atmel_sama7g5_ospi_caps, + }, + { + .compatible = "microchip,sama7g5-qspi", + .data = &atmel_sama7g5_qspi_caps, + }, + { /* sentinel */ } };