From patchwork Mon Feb 10 13:18:21 2025 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Patrice CHOTARD X-Patchwork-Id: 864034 Received: from mx07-00178001.pphosted.com (mx07-00178001.pphosted.com [185.132.182.106]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 8832222D4C2; Mon, 10 Feb 2025 13:21:24 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.132.182.106 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1739193686; cv=none; b=Dx5SHLypzTg1iKL59grge/O/BwW2FPHJfN9kXQp3dYs8r0odk9ZTYWFhaGCp0evEuWJKj3XeU5x8Fu/cIJTyubRWALTVZUh+MV6SFXAfcGXL/GpjkDvPObC9bzudIb9kZHTe/810lSbQnWrPd8XJBfww6YjYYZtw5aPC3V/tanM= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1739193686; c=relaxed/simple; bh=AJ20ISsKso8vEk1nzgaNXjFKgZlnWx5NvEeF6Neet/k=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=p6IhHkoa5r4tHLnRlWjSfkhr7cxYVwSo0xCY8kEG8g57TEsBsgF0liujgJOnCFCke+dmxXsEYcjafUb/lKdBn3PsGZvAF1Kr8BWGV2WRy/52d58EO1jX+7hWBTld5tXtWb1ULlMWjEXjLjhXB7AQUr4Vunphu6eZYidFEd2LM24= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=foss.st.com; spf=pass smtp.mailfrom=foss.st.com; dkim=pass (2048-bit key) header.d=foss.st.com header.i=@foss.st.com header.b=S0Dd4nzI; arc=none smtp.client-ip=185.132.182.106 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=foss.st.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=foss.st.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=foss.st.com header.i=@foss.st.com header.b="S0Dd4nzI" Received: from pps.filterd (m0288072.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 51AComCp009308; Mon, 10 Feb 2025 14:21:07 +0100 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=selector1; bh= YNxEfnNluDmAZ9BnyWTBCUGQ5/LGXiIbxdbUqUYLb+0=; b=S0Dd4nzImpK4blBN TDk/0O3x/8SJfOarCZqlmOs8d6l4p1fp8nAXDj6jN9ZhJaWt7Fli5UGlNSefeWde ocnpGlY9SJrk9O5J76i1rqBnn5qVAcPUQdBl2gWV1Yszkf6MCK3yb/BvU1GGzp1t ar///vdjEc1wcvp5dNasExKfZ5pP123Ewj15zpWKlFPd282L891z7Qv9WSRcURGy cf+SnsimxjTOemrxXhA+b4SbJzm24h/zf7DH501E3HDUeQNJyGV0i6QBX1ZluRnE B4DLxl28oBfMd0k0kx2AeKEojmWjYrGa2ICTcLFsyK0A5Sj46bni2HywdMu7Yw2u 6gF3Kw== Received: from beta.dmz-ap.st.com (beta.dmz-ap.st.com [138.198.100.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 44p0pypq6n-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 10 Feb 2025 14:21:06 +0100 (CET) Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-ap.st.com (STMicroelectronics) with ESMTP id 33B3A40048; Mon, 10 Feb 2025 14:19:35 +0100 (CET) Received: from Webmail-eu.st.com (shfdag1node1.st.com [10.75.129.69]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 6738525BCB9; Mon, 10 Feb 2025 14:18:34 +0100 (CET) Received: from localhost (10.48.87.62) by SHFDAG1NODE1.st.com (10.75.129.69) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.39; Mon, 10 Feb 2025 14:18:34 +0100 From: To: Mark Brown , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Alexandre Torgue , Philipp Zabel , Maxime Coquelin , Greg Kroah-Hartman , Arnd Bergmann , Catalin Marinas , Will Deacon CC: , , , , , , Subject: [PATCH v3 3/8] dt-bindings: memory-controllers: Add STM32 Octo Memory Manager controller Date: Mon, 10 Feb 2025 14:18:21 +0100 Message-ID: <20250210131826.220318-4-patrice.chotard@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20250210131826.220318-1-patrice.chotard@foss.st.com> References: <20250210131826.220318-1-patrice.chotard@foss.st.com> Precedence: bulk X-Mailing-List: linux-spi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ClientProxiedBy: SAFCAS1NODE1.st.com (10.75.90.11) To SHFDAG1NODE1.st.com (10.75.129.69) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1057,Hydra:6.0.680,FMLib:17.12.68.34 definitions=2025-02-10_07,2025-02-10_01,2024-11-22_01 From: Patrice Chotard Add bindings for STM32 Octo Memory Manager (OMM) controller. OMM manages: - the muxing between 2 OSPI busses and 2 output ports. There are 4 possible muxing configurations: - direct mode (no multiplexing): OSPI1 output is on port 1 and OSPI2 output is on port 2 - OSPI1 and OSPI2 are multiplexed over the same output port 1 - swapped mode (no multiplexing), OSPI1 output is on port 2, OSPI2 output is on port 1 - OSPI1 and OSPI2 are multiplexed over the same output port 2 - the split of the memory area shared between the 2 OSPI instances. - chip select selection override. - the time between 2 transactions in multiplexed mode. Signed-off-by: Patrice Chotard --- .../memory-controllers/st,stm32mp25-omm.yaml | 201 ++++++++++++++++++ 1 file changed, 201 insertions(+) create mode 100644 Documentation/devicetree/bindings/memory-controllers/st,stm32mp25-omm.yaml diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32mp25-omm.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32mp25-omm.yaml new file mode 100644 index 000000000000..c897e6bf490d --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32mp25-omm.yaml @@ -0,0 +1,201 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/st,stm32mp25-omm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STM32 Octo Memory Manager (OMM) + +maintainers: + - Patrice Chotard + +description: | + The STM32 Octo Memory Manager is a low-level interface that enables an + efficient OCTOSPI pin assignment with a full I/O matrix (before alternate + function map) and multiplex of single/dual/quad/octal SPI interfaces over + the same bus. It Supports up to: + - Two single/dual/quad/octal SPI interfaces + - Two ports for pin assignment + +properties: + compatible: + const: st,stm32mp25-omm + + "#address-cells": + const: 2 + + "#size-cells": + const: 1 + + ranges: + description: | + Reflects the memory layout with four integer values per OSPI instance. + Format: + 0 + minItems: 2 + maxItems: 2 + + reg: + items: + - description: OMM registers + - description: OMM memory map area + + reg-names: + items: + - const: regs + - const: memory_map + + memory-region: + description: | + Memory region shared between the 2 OCTOSPI instance. + One or two phandle to a node describing a memory mapped region + depending of child number. + minItems: 1 + maxItems: 2 + + memory-region-names: + description: | + OCTOSPI instance's name to which memory region is associated + items: + enum: [ospi1, ospi2] + minItems: 1 + maxItems: 2 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + access-controllers: + maxItems: 1 + + st,syscfg-amcr: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + The Address Mapping Control Register (AMCR) is used to split the 256MB + memory map area shared between the 2 OSPI instance. The Octo Memory + Manager sets the AMCR depending of the memory-region configuration. + The memory split bitmask description is: + - 000: OCTOSPI1 (256 Mbytes), OCTOSPI2 unmapped + - 001: OCTOSPI1 (192 Mbytes), OCTOSPI2 (64 Mbytes) + - 010: OCTOSPI1 (128 Mbytes), OCTOSPI2 (128 Mbytes) + - 011: OCTOSPI1 (64 Mbytes), OCTOSPI2 (192 Mbytes) + - 1xx: OCTOSPI1 unmapped, OCTOSPI2 (256 Mbytes) + items: + - description: phandle to syscfg + - description: register offset within syscfg + - description: register bitmask for memory split + + st,omm-req2ack-ns: + description: | + In multiplexed mode (MUXEN = 1), this field defines the time in + nanoseconds between two transactions. + + st,omm-cssel-ovr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Configure the chip select selector override for the 2 OCTOSPIs. + - 0: OCTOSPI1 chip select send to NCS1 OCTOSPI2 chip select send to NCS1 + - 1: OCTOSPI1 chip select send to NCS2 OCTOSPI2 chip select send to NCS1 + - 2: OCTOSPI1 chip select send to NCS1 OCTOSPI2 chip select send to NCS2 + - 3: OCTOSPI1 chip select send to NCS2 OCTOSPI2 chip select send to NCS2 + minimum: 0 + maximum: 3 + + st,omm-mux: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Configure the muxing between the 2 OCTOSPIs busses and the 2 output ports. + - 0: direct mode, default + - 1: mux OCTOSPI1 and OCTOSPI2 to port 1 + - 2: swapped mode + - 3: mux OCTOSPI1 and OCTOSPI2 to port 2 + minimum: 0 + maximum: 3 + + power-domains: + maxItems: 1 + +patternProperties: + ^spi@[a-f0-9]+$: + type: object + $ref: /schemas/spi/st,stm32mp25-ospi.yaml# + description: Required spi child node + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - clocks + - st,syscfg-amcr + - ranges + +additionalProperties: false + +examples: + - | + #include + #include + #include + ommanager@40500000 { + compatible = "st,stm32mp25-omm"; + reg = <0x40500000 0x400>, <0x60000000 0x10000000>; + reg-names = "regs", "memory_map"; + ranges = <0 0 0x40430000 0x400>, + <1 0 0x40440000 0x400>; + memory-region = <&mm_ospi1>, <&mm_ospi2>; + memory-region-names = "ospi1", "ospi2"; + pinctrl-0 = <&ospi_port1_clk_pins_a + &ospi_port1_io03_pins_a + &ospi_port1_cs0_pins_a>; + pinctrl-1 = <&ospi_port1_clk_sleep_pins_a + &ospi_port1_io03_sleep_pins_a + &ospi_port1_cs0_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + clocks = <&rcc CK_BUS_OSPIIOM>; + resets = <&rcc OSPIIOM_R>; + access-controllers = <&rifsc 111>; + power-domains = <&CLUSTER_PD>; + #address-cells = <2>; + #size-cells = <1>; + st,syscfg-amcr = <&syscfg 0x2c00 0x7>; + st,omm-req2ack-ns = <0>; + st,omm-mux = <0>; + st,omm-cssel-ovr = <0>; + + spi@40430000 { + compatible = "st,stm32mp25-ospi"; + reg = <0 0 0x400>; + memory-region = <&mm_ospi1>; + interrupts = ; + dmas = <&hpdma 2 0x62 0x00003121 0x0>, + <&hpdma 2 0x42 0x00003112 0x0>; + dma-names = "tx", "rx"; + clocks = <&scmi_clk CK_SCMI_OSPI1>; + resets = <&scmi_reset RST_SCMI_OSPI1>, <&scmi_reset RST_SCMI_OSPI1DLL>; + access-controllers = <&rifsc 74>; + power-domains = <&CLUSTER_PD>; + #address-cells = <1>; + #size-cells = <0>; + st,syscfg-dlyb = <&syscfg 0x1000>; + }; + + spi@40440000 { + compatible = "st,stm32mp25-ospi"; + reg = <1 0 0x400>; + memory-region = <&mm_ospi1>; + interrupts = ; + dmas = <&hpdma 3 0x62 0x00003121 0x0>, + <&hpdma 3 0x42 0x00003112 0x0>; + dma-names = "tx", "rx"; + clocks = <&scmi_clk CK_KER_OSPI2>; + resets = <&scmi_reset RST_SCMI_OSPI2>, <&scmi_reset RST_SCMI_OSPI1DLL>; + access-controllers = <&rifsc 75>; + power-domains = <&CLUSTER_PD>; + #address-cells = <1>; + #size-cells = <0>; + st,syscfg-dlyb = <&syscfg 0x1000>; + }; + };