diff mbox series

[v3,8/9] spi: geni-qcom: Load spi qup Firmware from linux side

Message ID 20250303124349.3474185-9-quic_vdadhani@quicinc.com
State New
Headers show
Series Add support to load QUP SE firmware from | expand

Commit Message

Viken Dadhaniya March 3, 2025, 12:43 p.m. UTC 
Add provision to load firmware of Serial engine for SPI protocol from
Linux Execution Environment on running on APPS processor.

Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
---
v2 -> v3:

- Load firmware only if the protocol is invalid.

v2 Link: https://lore.kernel.org/linux-arm-msm/20250124105309.295769-8-quic_vdadhani@quicinc.com/

v1 -> v2:

- No change.

v1 Link: https://lore.kernel.org/linux-arm-msm/20241204150326.1470749-7-quic_vdadhani@quicinc.com/
---
---
 drivers/spi/spi-geni-qcom.c | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
index 768d7482102a..a0d8d3425c6c 100644
--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -671,6 +671,12 @@  static int spi_geni_init(struct spi_geni_master *mas)
 			goto out_pm;
 		}
 		spi_slv_setup(mas);
+	} else if (proto == GENI_SE_INVALID_PROTO) {
+		ret = geni_load_se_firmware(se, GENI_SE_SPI);
+		if (ret) {
+			dev_err(mas->dev, "spi master firmware load failed ret: %d\n", ret);
+			goto out_pm;
+		}
 	} else if (proto != GENI_SE_SPI) {
 		dev_err(mas->dev, "Invalid proto %d\n", proto);
 		goto out_pm;