diff mbox series

[06/10] spi: espi_amd: Add eSPI set channel IOCTL command

Message ID 20250313183440.261872-7-Raju.Rangoju@amd.com
State New
Headers show
Series spi: Add driver to support AMD eSPI controller | expand

Commit Message

Raju Rangoju March 13, 2025, 6:34 p.m. UTC 
This patch introduces support for a new IOCTL command to set the channel
of eSPI controller. Currently espi_amd driver supports to enable
peripheral and virtual wire channels.

Co-developed-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Signed-off-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
---
 drivers/spi/espi-amd-dev.c | 49 ++++++++++++++++++++++++++++++++++++++
 drivers/spi/espi-amd.h     |  1 +
 2 files changed, 50 insertions(+)
diff mbox series

Patch

diff --git a/drivers/spi/espi-amd-dev.c b/drivers/spi/espi-amd-dev.c
index 821cc0486657..c78a9b2b059b 100644
--- a/drivers/spi/espi-amd-dev.c
+++ b/drivers/spi/espi-amd-dev.c
@@ -203,6 +203,52 @@  static int amd_espi_ioctl_set_io_mode(struct amd_espi *amd_espi, unsigned long a
 	return ret;
 }
 
+static int amd_espi_ioctl_set_channel_mode(struct amd_espi *amd_espi, unsigned long arg)
+{
+	struct config *config;
+	u32 slave_config;
+	int ret;
+
+	config = kzalloc(sizeof(*config), GFP_KERNEL);
+	if (!config)
+		return -ENOMEM;
+
+	if (copy_from_user(config, (void __user *)arg, sizeof(struct config))) {
+		ret = -EFAULT;
+		goto set_chan_mode_free;
+	}
+
+	ret = amd_espi_get_general_config(amd_espi, &slave_config);
+	if (ret != CB_SUCCESS) {
+		dev_err(amd_espi->dev, "Get configuration failed\n");
+		goto set_chan_mode_free;
+	}
+
+	switch (config->channel_mode) {
+	case CHANNEL_MODE_PC:
+		ret = amd_espi_setup_periph_channel(amd_espi, slave_config);
+		if (ret != CB_SUCCESS) {
+			dev_err(amd_espi->dev, "Setup peripheral channel failed\n");
+			goto set_chan_mode_free;
+		}
+		break;
+	case CHANNEL_MODE_VW:
+		ret = amd_espi_setup_vw_channel(amd_espi, slave_config);
+		if (ret != CB_SUCCESS) {
+			dev_err(amd_espi->dev, "Setup virtual wire channel failed\n");
+			goto set_chan_mode_free;
+		}
+		break;
+	default:
+		dev_err(amd_espi->dev, "Channel: not supported\n");
+		ret = -EOPNOTSUPP;
+	}
+
+set_chan_mode_free:
+	kfree(config);
+	return ret;
+}
+
 static long amd_espi_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	struct amd_espi *amd_espi = filp->private_data;
@@ -227,6 +273,9 @@  static long amd_espi_ioctl(struct file *filp, unsigned int cmd, unsigned long ar
 	case ESPI_SET_IO_MODE:
 		ret = amd_espi_ioctl_set_io_mode(amd_espi, arg);
 		break;
+	case ESPI_SET_CHAN_MODE:
+		ret = amd_espi_ioctl_set_channel_mode(amd_espi, arg);
+		break;
 	default:
 		dev_err(amd_espi->dev, "ESPI command not found, returning error\n");
 		ret = -EINVAL;
diff --git a/drivers/spi/espi-amd.h b/drivers/spi/espi-amd.h
index f1185f877a05..3774918d994f 100644
--- a/drivers/spi/espi-amd.h
+++ b/drivers/spi/espi-amd.h
@@ -144,6 +144,7 @@ 
 #define ESPI_GET_CONFIG              _IOR(ESPI_MAGIC_NUMBER, 0x2, struct config)
 #define ESPI_INBAND_RESET            _IO(ESPI_MAGIC_NUMBER, 0x3)
 #define ESPI_SET_IO_MODE             _IOW(ESPI_MAGIC_NUMBER, 0x4, struct config)
+#define ESPI_SET_CHAN_MODE           _IOW(ESPI_MAGIC_NUMBER, 0x5, struct config)
 
 /*
  * enum amd_espi_versions - eSPI controller versions