diff mbox series

[v2,05/14] spi: spi-fsl-dspi: Define regmaps per device

Message ID 20250522-james-nxp-spi-v2-5-bea884630cfb@linaro.org
State New
Headers show
Series spi: spi-fsl-dspi: DSPI support for NXP S32G platforms | expand

Commit Message

James Clark May 22, 2025, 2:51 p.m. UTC 
Refactor the regmaps so they can be defined per device rather than
programmatically. This will allow us to add two new regmaps for S32G in
a later commit.

No functional changes.

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: James Clark <james.clark@linaro.org>
---
 drivers/spi/spi-fsl-dspi.c | 136 ++++++++++++++++++++++++---------------------
 1 file changed, 74 insertions(+), 62 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 09b2b25ed274..437a8db9fa2b 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -122,6 +122,7 @@  struct fsl_dspi_devtype_data {
 	enum dspi_trans_mode	trans_mode;
 	u8			max_clock_factor;
 	int			fifo_size;
+	const struct regmap_config *regmap;
 };
 
 enum {
@@ -137,60 +138,130 @@  enum {
 	VF610,
 };
 
+static const struct regmap_range dspi_yes_ranges[] = {
+	regmap_reg_range(SPI_MCR, SPI_MCR),
+	regmap_reg_range(SPI_TCR, SPI_CTAR(3)),
+	regmap_reg_range(SPI_SR, SPI_TXFR3),
+	regmap_reg_range(SPI_RXFR0, SPI_RXFR3),
+	regmap_reg_range(SPI_CTARE(0), SPI_CTARE(3)),
+	regmap_reg_range(SPI_SREX, SPI_SREX),
+};
+
+static const struct regmap_access_table dspi_access_table = {
+	.yes_ranges	= dspi_yes_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(dspi_yes_ranges),
+};
+
+static const struct regmap_range dspi_volatile_ranges[] = {
+	regmap_reg_range(SPI_MCR, SPI_TCR),
+	regmap_reg_range(SPI_SR, SPI_SR),
+	regmap_reg_range(SPI_PUSHR, SPI_RXFR3),
+	regmap_reg_range(SPI_SREX, SPI_SREX),
+};
+
+static const struct regmap_access_table dspi_volatile_table = {
+	.yes_ranges	= dspi_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(dspi_volatile_ranges),
+};
+
+enum {
+	DSPI_REGMAP,
+	DSPI_XSPI_REGMAP,
+	DSPI_PUSHR,
+};
+
+static const struct regmap_config dspi_regmap_config[] = {
+	[DSPI_REGMAP] = {
+		.reg_bits	= 32,
+		.val_bits	= 32,
+		.reg_stride	= 4,
+		.max_register	= SPI_RXFR3,
+		.volatile_table	= &dspi_volatile_table,
+		.rd_table	= &dspi_access_table,
+		.wr_table	= &dspi_access_table,
+	},
+	[DSPI_XSPI_REGMAP] = {
+		.reg_bits	= 32,
+		.val_bits	= 32,
+		.reg_stride	= 4,
+		.max_register	= SPI_SREX,
+		.volatile_table	= &dspi_volatile_table,
+		.rd_table	= &dspi_access_table,
+		.wr_table	= &dspi_access_table,
+	},
+	[DSPI_PUSHR] = {
+		.name		= "pushr",
+		.reg_bits	= 16,
+		.val_bits	= 16,
+		.reg_stride	= 2,
+		.max_register	= 0x2,
+	},
+};
+
 static const struct fsl_dspi_devtype_data devtype_data[] = {
 	[VF610] = {
 		.trans_mode		= DSPI_DMA_MODE,
 		.max_clock_factor	= 2,
 		.fifo_size		= 4,
+		.regmap			= &dspi_regmap_config[DSPI_REGMAP],
 	},
 	[LS1021A] = {
 		/* Has A-011218 DMA erratum */
 		.trans_mode		= DSPI_XSPI_MODE,
 		.max_clock_factor	= 8,
 		.fifo_size		= 4,
+		.regmap			= &dspi_regmap_config[DSPI_XSPI_REGMAP],
 	},
 	[LS1012A] = {
 		/* Has A-011218 DMA erratum */
 		.trans_mode		= DSPI_XSPI_MODE,
 		.max_clock_factor	= 8,
 		.fifo_size		= 16,
+		.regmap			= &dspi_regmap_config[DSPI_XSPI_REGMAP],
 	},
 	[LS1028A] = {
 		.trans_mode		= DSPI_XSPI_MODE,
 		.max_clock_factor	= 8,
 		.fifo_size		= 4,
+		.regmap			= &dspi_regmap_config[DSPI_XSPI_REGMAP],
 	},
 	[LS1043A] = {
 		/* Has A-011218 DMA erratum */
 		.trans_mode		= DSPI_XSPI_MODE,
 		.max_clock_factor	= 8,
 		.fifo_size		= 16,
+		.regmap			= &dspi_regmap_config[DSPI_XSPI_REGMAP],
 	},
 	[LS1046A] = {
 		/* Has A-011218 DMA erratum */
 		.trans_mode		= DSPI_XSPI_MODE,
 		.max_clock_factor	= 8,
 		.fifo_size		= 16,
+		.regmap			= &dspi_regmap_config[DSPI_XSPI_REGMAP],
 	},
 	[LS2080A] = {
 		.trans_mode		= DSPI_XSPI_MODE,
 		.max_clock_factor	= 8,
 		.fifo_size		= 4,
+		.regmap			= &dspi_regmap_config[DSPI_XSPI_REGMAP],
 	},
 	[LS2085A] = {
 		.trans_mode		= DSPI_XSPI_MODE,
 		.max_clock_factor	= 8,
 		.fifo_size		= 4,
+		.regmap			= &dspi_regmap_config[DSPI_XSPI_REGMAP],
 	},
 	[LX2160A] = {
 		.trans_mode		= DSPI_XSPI_MODE,
 		.max_clock_factor	= 8,
 		.fifo_size		= 4,
+		.regmap			= &dspi_regmap_config[DSPI_XSPI_REGMAP],
 	},
 	[MCF5441X] = {
 		.trans_mode		= DSPI_DMA_MODE,
 		.max_clock_factor	= 8,
 		.fifo_size		= 16,
+		.regmap			= &dspi_regmap_config[DSPI_REGMAP],
 	},
 };
 
@@ -1191,61 +1262,6 @@  static int dspi_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(dspi_pm, dspi_suspend, dspi_resume);
 
-static const struct regmap_range dspi_yes_ranges[] = {
-	regmap_reg_range(SPI_MCR, SPI_MCR),
-	regmap_reg_range(SPI_TCR, SPI_CTAR(3)),
-	regmap_reg_range(SPI_SR, SPI_TXFR3),
-	regmap_reg_range(SPI_RXFR0, SPI_RXFR3),
-	regmap_reg_range(SPI_CTARE(0), SPI_CTARE(3)),
-	regmap_reg_range(SPI_SREX, SPI_SREX),
-};
-
-static const struct regmap_access_table dspi_access_table = {
-	.yes_ranges	= dspi_yes_ranges,
-	.n_yes_ranges	= ARRAY_SIZE(dspi_yes_ranges),
-};
-
-static const struct regmap_range dspi_volatile_ranges[] = {
-	regmap_reg_range(SPI_MCR, SPI_TCR),
-	regmap_reg_range(SPI_SR, SPI_SR),
-	regmap_reg_range(SPI_PUSHR, SPI_RXFR3),
-	regmap_reg_range(SPI_SREX, SPI_SREX),
-};
-
-static const struct regmap_access_table dspi_volatile_table = {
-	.yes_ranges	= dspi_volatile_ranges,
-	.n_yes_ranges	= ARRAY_SIZE(dspi_volatile_ranges),
-};
-
-static const struct regmap_config dspi_regmap_config = {
-	.reg_bits	= 32,
-	.val_bits	= 32,
-	.reg_stride	= 4,
-	.max_register	= SPI_RXFR3,
-	.volatile_table	= &dspi_volatile_table,
-	.rd_table	= &dspi_access_table,
-	.wr_table	= &dspi_access_table,
-};
-
-static const struct regmap_config dspi_xspi_regmap_config[] = {
-	{
-		.reg_bits	= 32,
-		.val_bits	= 32,
-		.reg_stride	= 4,
-		.max_register	= SPI_SREX,
-		.volatile_table	= &dspi_volatile_table,
-		.rd_table	= &dspi_access_table,
-		.wr_table	= &dspi_access_table,
-	},
-	{
-		.name		= "pushr",
-		.reg_bits	= 16,
-		.val_bits	= 16,
-		.reg_stride	= 2,
-		.max_register	= 0x2,
-	},
-};
-
 static int dspi_init(struct fsl_dspi *dspi)
 {
 	unsigned int mcr;
@@ -1305,7 +1321,6 @@  static int dspi_target_abort(struct spi_controller *host)
 static int dspi_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
-	const struct regmap_config *regmap_config;
 	struct fsl_dspi_platform_data *pdata;
 	struct spi_controller *ctlr;
 	int ret, cs_num, bus_num = -1;
@@ -1388,11 +1403,8 @@  static int dspi_probe(struct platform_device *pdev)
 		goto out_ctlr_put;
 	}
 
-	if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE)
-		regmap_config = &dspi_xspi_regmap_config[0];
-	else
-		regmap_config = &dspi_regmap_config;
-	dspi->regmap = devm_regmap_init_mmio(&pdev->dev, base, regmap_config);
+	dspi->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+					     dspi->devtype_data->regmap);
 	if (IS_ERR(dspi->regmap)) {
 		dev_err(&pdev->dev, "failed to init regmap: %ld\n",
 				PTR_ERR(dspi->regmap));
@@ -1403,7 +1415,7 @@  static int dspi_probe(struct platform_device *pdev)
 	if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE) {
 		dspi->regmap_pushr = devm_regmap_init_mmio(
 			&pdev->dev, base + SPI_PUSHR,
-			&dspi_xspi_regmap_config[1]);
+			&dspi_regmap_config[DSPI_PUSHR]);
 		if (IS_ERR(dspi->regmap_pushr)) {
 			dev_err(&pdev->dev,
 				"failed to init pushr regmap: %ld\n",