mbox series

[v4,00/11] ARM: Introduce HPE GXP Architecture

Message ID 20220420150114.47356-1-nick.hawkins@hpe.com
Headers show
Series ARM: Introduce HPE GXP Architecture | expand

Message

Hawkins, Nick April 20, 2022, 3:01 p.m. UTC 
From: Nick Hawkins <nick.hawkins@hpe.com>

Changes since v3:
 *Completely redid the dtsi file to represent architecture
 *Reduced device tree size
 *Rewrote the timer driver to start the watchdog driver due
 to similar register region
 *Made adjustments to timer
 *Made adjustments to watchdog
 *Changed gxp.yaml to hpe,gxp.yaml with changes
 *Updated Maintainers to represent new file names
 *Added hpe bindings to generic-ehci and generic-ohci
 *Fixed clock architecture to be accurate

Changes since v2:
 *Reduced size of changes, put them into patchset format

Changes since v1:
 *Fixed compiler warnings

The GXP is the HPE BMC SoC that is used in the majority
of HPE Generation 10 servers. Traditionally the asic will
last multiple generations of server before being replaced.

Info about SoC:

 HPE GXP is the name of the HPE Soc. This SoC is used to implement
 many BMC features at HPE. It supports ARMv7 architecture based on
 the Cortex A9 core. It is capable of using an AXI bus to which
 a memory controller is attached. It has multiple SPI interfaces
 to connect boot flash and BIOS flash. It uses a 10/100/1000 MAC
 for network connectivity. It has multiple i2c engines to drive
 connectivity with a host infrastructure. The initial patches
 enable the watchdog and timer enabling the host to be able to
 boot. Based on feedback from the device tree gxp-timer now
 creates a gxp-wdt child because of similar register region.

Nick Hawkins (11):
  arch: arm: mach-hpe: Introduce the HPE GXP architecture
  arch: arm: configs: multi_v7_defconfig
  drivers: wdt: Introduce HPE GXP SoC Watchdog
  clocksource/drivers: Add HPE GXP timer
  dt-bindings: timer: Add HPE GXP Timer Binding
  dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  dt-bindings: arm: Add HPE GXP Binding
  dt-bindings: usb: generic-echi:  Add HPE GXP echi binding
  dt-bindings: usb: generic-ochi:  Add HPE GXP ochi binding
  arch: arm: boot: dts: Introduce HPE GXP Device tree
  maintainers: Introduce HPE GXP Architecture

 .../devicetree/bindings/arm/hpe,gxp.yaml      |  22 +++
 .../bindings/timer/hpe,gxp-timer.yaml         |  49 +++++
 .../devicetree/bindings/usb/generic-ehci.yaml |   1 +
 .../devicetree/bindings/usb/generic-ohci.yaml |   1 +
 .../bindings/watchdog/hpe,gxp-wdt.yaml        |  30 +++
 MAINTAINERS                                   |  13 ++
 arch/arm/Kconfig                              |   2 +
 arch/arm/Makefile                             |   1 +
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/hpe-bmc-dl360gen10.dts      |  13 ++
 arch/arm/boot/dts/hpe-gxp.dtsi                | 128 ++++++++++++
 arch/arm/configs/multi_v7_defconfig           |   3 +
 arch/arm/mach-hpe/Kconfig                     |  17 ++
 arch/arm/mach-hpe/Makefile                    |   1 +
 arch/arm/mach-hpe/gxp.c                       |  16 ++
 drivers/clocksource/Kconfig                   |   8 +
 drivers/clocksource/Makefile                  |   1 +
 drivers/clocksource/timer-gxp.c               | 183 ++++++++++++++++++
 drivers/watchdog/Kconfig                      |   8 +
 drivers/watchdog/Makefile                     |   1 +
 drivers/watchdog/gxp-wdt.c                    | 166 ++++++++++++++++
 21 files changed, 666 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/hpe,gxp.yaml
 create mode 100644 Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml
 create mode 100644 Documentation/devicetree/bindings/watchdog/hpe,gxp-wdt.yaml
 create mode 100644 arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
 create mode 100644 arch/arm/boot/dts/hpe-gxp.dtsi
 create mode 100644 arch/arm/mach-hpe/Kconfig
 create mode 100644 arch/arm/mach-hpe/Makefile
 create mode 100644 arch/arm/mach-hpe/gxp.c
 create mode 100644 drivers/clocksource/timer-gxp.c
 create mode 100644 drivers/watchdog/gxp-wdt.c