| Message ID | 20250304091939.52318-1-fabio.porcedda@gmail.com |
|---|---|
| Headers | show |
| Series | Add usb option support for Telit Cinterion FE990B | expand |
Il giorno mar 4 mar 2025 alle ore 10:21 Fabio Porcedda <fabio.porcedda@gmail.com> ha scritto: > > Add the following Telit Cinterion FE990B40 compositions: > > 0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + > tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 > D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=1bc7 ProdID=10b0 Rev=05.15 > S: Manufacturer=Telit Cinterion > S: Product=FE990 > S: SerialNumber=28c2595e > C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms > I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option > E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) > E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) > E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) > E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > > 0x10b1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + > tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 > D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=1bc7 ProdID=10b1 Rev=05.15 > S: Manufacturer=Telit Cinterion > S: Product=FE990 > S: SerialNumber=28c2595e > C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim > E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option > E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) > E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) > E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) > E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > > 0x10b2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + > tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 > D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=1bc7 ProdID=10b2 Rev=05.15 > S: Manufacturer=Telit Cinterion > S: Product=FE990 > S: SerialNumber=28c2595e > C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host > E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms > I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option > E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) > E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) > E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) > E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > > 0x10b3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + > tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 > D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=1bc7 ProdID=10b3 Rev=05.15 > S: Manufacturer=Telit Cinterion > S: Product=FE990 > S: SerialNumber=28c2595e > C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether > E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option > E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) > E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) > E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) > E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > > Cc: stable@vger.kernel.org > Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
On Tue, Mar 04, 2025 at 10:19:38AM +0100, Fabio Porcedda wrote: > Add the following Telit Cinterion FE990B40 compositions: > Cc: stable@vger.kernel.org > Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> > --- > drivers/usb/serial/option.c | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c > index 58bd54e8c483..8660f7a89b01 100644 > --- a/drivers/usb/serial/option.c > +++ b/drivers/usb/serial/option.c > @@ -1388,6 +1388,22 @@ static const struct usb_device_id option_ids[] = { > .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) }, > { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10aa, 0xff), /* Telit FN920C04 (MBIM) */ > .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) }, > + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b0, 0x60) }, /* Telit FE990B (rmnet) */ > + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b0, 0x40) }, > + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b0, 0x30), > + .driver_info = NCTRL(5) }, > + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b1, 0x60) }, /* Telit FE990B (MBIM) */ > + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b1, 0x40) }, > + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b1, 0x30), > + .driver_info = NCTRL(6) }, > + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b2, 0x60) }, /* Telit FE990B (RNDIS) */ > + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b2, 0x40) }, > + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b2, 0x30), > + .driver_info = NCTRL(6) }, > + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b3, 0x60) }, /* Telit FE990B (ECM) */ > + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b3, 0x40) }, > + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b3, 0x30), > + .driver_info = NCTRL(6) }, Thanks for the patches. I noticed now that you use USB_DEVICE_INTERFACE_PROTOCOL() just like you recently did for FN990B. While this works, the protocol is qualified by the interface class and subclass which should have been included. I changed these to use USB_DEVICE_AND_INTERFACE_INFO() and sorted the entries also by protocol. I'll send out a corresponding change for FN990B. Johan
Add usb option support for Telit Cinterion FE990B. Also fix Telit Cinterion FE990A name. Connection with ModemManager was tested also AT ports. There is a different patch set for the net part. 0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10b1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b1 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10b2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b2 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10b3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b3 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms v2: - in the subject of the cover letter refer to FE990B instead of FN990B - fix the commit message and cover letter using the correct pid 0x10b3 instead of the wrong one 0x10d3 Fabio Porcedda (2): USB: serial: option: add Telit Cinterion FE990B compositions USB: serial: option: fix Telit Cinterion FE990A name drivers/usb/serial/option.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-)