| Message ID | 1604403610-16577-4-git-send-email-jun.li@nxp.com |
|---|---|
| State | New |
| Headers | show |
| Series | None | expand |
On Tue, Nov 03, 2020 at 07:40:10PM +0800, Li Jun wrote: > This patch adds a simple typec switch driver for cases which only > needs some simple operations but a dedicated driver is required, > current driver only supports GPIO toggle to switch the super speed > active channel according to typec orientation. > > Signed-off-by: Li Jun <jun.li@nxp.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> > --- > Changes for v5: > - A few changes address Andy's comment, remove gpio check as it's > optional, add module name for Kconfig, use correct header files, > and other minor changes. > - Remove the mutex lock as it's not required currently. > > Changes for v4: > - Change driver name to be switch simple from switch GPIO, to make it > generic for possible extention. > - Use compatiable "typec-orientation-switch" instead of bool property > for switch matching. > - Make acitve channel selection GPIO to be optional. > - Remove Andy's R-b tag since the driver changes a lot. > > Change for v3: > - Remove file name in driver description. > - Add Andy Shevchenko's Reviewed-by tag. > > Changes for v2: > - Use the correct head files for gpio api and of_device_id: > #include <linux/gpio/consumer.h> > #include <linux/mod_devicetable.h> > - Add driver dependency on GPIOLIB > > drivers/usb/typec/mux/Kconfig | 10 ++++ > drivers/usb/typec/mux/Makefile | 1 + > drivers/usb/typec/mux/switch-simple.c | 100 ++++++++++++++++++++++++++++++++++ > 3 files changed, 111 insertions(+) > > diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig > index a4dbd11..11320d7 100644 > --- a/drivers/usb/typec/mux/Kconfig > +++ b/drivers/usb/typec/mux/Kconfig > @@ -18,4 +18,14 @@ config TYPEC_MUX_INTEL_PMC > control the USB role switch and also the multiplexer/demultiplexer > switches used with USB Type-C Alternate Modes. > > +config TYPEC_SWITCH_SIMPLE > + tristate "Type-C orientation switch simple driver" > + depends on GPIOLIB > + help > + Say Y or M if your system need a simple driver for typec switch > + control, like use GPIO to select active channel. > + > + To compile this driver as a module, choose M here: the > + module will be called switch-simple. > + > endmenu > diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile > index 280a6f5..712d0ad 100644 > --- a/drivers/usb/typec/mux/Makefile > +++ b/drivers/usb/typec/mux/Makefile > @@ -2,3 +2,4 @@ > > obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o > obj-$(CONFIG_TYPEC_MUX_INTEL_PMC) += intel_pmc_mux.o > +obj-$(CONFIG_TYPEC_SWITCH_SIMPLE) += switch-simple.o > diff --git a/drivers/usb/typec/mux/switch-simple.c b/drivers/usb/typec/mux/switch-simple.c > new file mode 100644 > index 0000000..8707703 > --- /dev/null > +++ b/drivers/usb/typec/mux/switch-simple.c > @@ -0,0 +1,100 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Type-C switch simple control driver > + * > + * Copyright 2020 NXP > + * Author: Jun Li <jun.li@nxp.com> > + */ > + > +#include <linux/delay.h> > +#include <linux/gpio/consumer.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/mod_devicetable.h> > +#include <linux/mutex.h> > +#include <linux/platform_device.h> > +#include <linux/usb/typec_mux.h> > + > +struct typec_switch_simple { > + struct typec_switch *sw; > + struct gpio_desc *sel_gpio; > +}; > + > +static int typec_switch_simple_set(struct typec_switch *sw, > + enum typec_orientation orientation) > +{ > + struct typec_switch_simple *typec_sw = typec_switch_get_drvdata(sw); > + > + switch (orientation) { > + case TYPEC_ORIENTATION_NORMAL: > + gpiod_set_value_cansleep(typec_sw->sel_gpio, 1); > + break; > + case TYPEC_ORIENTATION_REVERSE: > + gpiod_set_value_cansleep(typec_sw->sel_gpio, 0); > + break; > + case TYPEC_ORIENTATION_NONE: > + break; > + } > + > + return 0; > +} > + > +static int typec_switch_simple_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct typec_switch_desc sw_desc; > + struct typec_switch_simple *typec_sw; > + > + typec_sw = devm_kzalloc(dev, sizeof(*typec_sw), GFP_KERNEL); > + if (!typec_sw) > + return -ENOMEM; > + > + platform_set_drvdata(pdev, typec_sw); > + > + sw_desc.drvdata = typec_sw; > + sw_desc.fwnode = dev->fwnode; > + sw_desc.set = typec_switch_simple_set; > + > + /* Get the super speed active channel selection GPIO */ > + typec_sw->sel_gpio = devm_gpiod_get_optional(dev, "switch", GPIOD_OUT_LOW); > + if (IS_ERR(typec_sw->sel_gpio)) > + return PTR_ERR(typec_sw->sel_gpio); > + > + typec_sw->sw = typec_switch_register(dev, &sw_desc); > + if (IS_ERR(typec_sw->sw)) { > + dev_err(dev, "Error registering typec switch: %ld\n", > + PTR_ERR(typec_sw->sw)); > + return PTR_ERR(typec_sw->sw); > + } > + > + return 0; > +} > + > +static int typec_switch_simple_remove(struct platform_device *pdev) > +{ > + struct typec_switch_simple *typec_sw = platform_get_drvdata(pdev); > + > + typec_switch_unregister(typec_sw->sw); > + > + return 0; > +} > + > +static const struct of_device_id of_typec_switch_simple_match[] = { > + { .compatible = "typec-orientation-switch" }, > + { /* Sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, of_typec_switch_simple_match); > + > +static struct platform_driver typec_switch_simple_driver = { > + .probe = typec_switch_simple_probe, > + .remove = typec_switch_simple_remove, > + .driver = { > + .name = "typec-switch-simple", > + .of_match_table = of_typec_switch_simple_match, > + }, > +}; > + > +module_platform_driver(typec_switch_simple_driver); > +MODULE_LICENSE("GPL v2"); > +MODULE_DESCRIPTION("TypeC Orientation Switch Simple driver"); > +MODULE_AUTHOR("Jun Li <jun.li@nxp.com>"); > -- > 2.7.4 thanks,
diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig index a4dbd11..11320d7 100644 --- a/drivers/usb/typec/mux/Kconfig +++ b/drivers/usb/typec/mux/Kconfig @@ -18,4 +18,14 @@ config TYPEC_MUX_INTEL_PMC control the USB role switch and also the multiplexer/demultiplexer switches used with USB Type-C Alternate Modes. +config TYPEC_SWITCH_SIMPLE + tristate "Type-C orientation switch simple driver" + depends on GPIOLIB + help + Say Y or M if your system need a simple driver for typec switch + control, like use GPIO to select active channel. + + To compile this driver as a module, choose M here: the + module will be called switch-simple. + endmenu diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile index 280a6f5..712d0ad 100644 --- a/drivers/usb/typec/mux/Makefile +++ b/drivers/usb/typec/mux/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o obj-$(CONFIG_TYPEC_MUX_INTEL_PMC) += intel_pmc_mux.o +obj-$(CONFIG_TYPEC_SWITCH_SIMPLE) += switch-simple.o diff --git a/drivers/usb/typec/mux/switch-simple.c b/drivers/usb/typec/mux/switch-simple.c new file mode 100644 index 0000000..8707703 --- /dev/null +++ b/drivers/usb/typec/mux/switch-simple.c @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Type-C switch simple control driver + * + * Copyright 2020 NXP + * Author: Jun Li <jun.li@nxp.com> + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/usb/typec_mux.h> + +struct typec_switch_simple { + struct typec_switch *sw; + struct gpio_desc *sel_gpio; +}; + +static int typec_switch_simple_set(struct typec_switch *sw, + enum typec_orientation orientation) +{ + struct typec_switch_simple *typec_sw = typec_switch_get_drvdata(sw); + + switch (orientation) { + case TYPEC_ORIENTATION_NORMAL: + gpiod_set_value_cansleep(typec_sw->sel_gpio, 1); + break; + case TYPEC_ORIENTATION_REVERSE: + gpiod_set_value_cansleep(typec_sw->sel_gpio, 0); + break; + case TYPEC_ORIENTATION_NONE: + break; + } + + return 0; +} + +static int typec_switch_simple_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct typec_switch_desc sw_desc; + struct typec_switch_simple *typec_sw; + + typec_sw = devm_kzalloc(dev, sizeof(*typec_sw), GFP_KERNEL); + if (!typec_sw) + return -ENOMEM; + + platform_set_drvdata(pdev, typec_sw); + + sw_desc.drvdata = typec_sw; + sw_desc.fwnode = dev->fwnode; + sw_desc.set = typec_switch_simple_set; + + /* Get the super speed active channel selection GPIO */ + typec_sw->sel_gpio = devm_gpiod_get_optional(dev, "switch", GPIOD_OUT_LOW); + if (IS_ERR(typec_sw->sel_gpio)) + return PTR_ERR(typec_sw->sel_gpio); + + typec_sw->sw = typec_switch_register(dev, &sw_desc); + if (IS_ERR(typec_sw->sw)) { + dev_err(dev, "Error registering typec switch: %ld\n", + PTR_ERR(typec_sw->sw)); + return PTR_ERR(typec_sw->sw); + } + + return 0; +} + +static int typec_switch_simple_remove(struct platform_device *pdev) +{ + struct typec_switch_simple *typec_sw = platform_get_drvdata(pdev); + + typec_switch_unregister(typec_sw->sw); + + return 0; +} + +static const struct of_device_id of_typec_switch_simple_match[] = { + { .compatible = "typec-orientation-switch" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, of_typec_switch_simple_match); + +static struct platform_driver typec_switch_simple_driver = { + .probe = typec_switch_simple_probe, + .remove = typec_switch_simple_remove, + .driver = { + .name = "typec-switch-simple", + .of_match_table = of_typec_switch_simple_match, + }, +}; + +module_platform_driver(typec_switch_simple_driver); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("TypeC Orientation Switch Simple driver"); +MODULE_AUTHOR("Jun Li <jun.li@nxp.com>");
This patch adds a simple typec switch driver for cases which only needs some simple operations but a dedicated driver is required, current driver only supports GPIO toggle to switch the super speed active channel according to typec orientation. Signed-off-by: Li Jun <jun.li@nxp.com> --- Changes for v5: - A few changes address Andy's comment, remove gpio check as it's optional, add module name for Kconfig, use correct header files, and other minor changes. - Remove the mutex lock as it's not required currently. Changes for v4: - Change driver name to be switch simple from switch GPIO, to make it generic for possible extention. - Use compatiable "typec-orientation-switch" instead of bool property for switch matching. - Make acitve channel selection GPIO to be optional. - Remove Andy's R-b tag since the driver changes a lot. Change for v3: - Remove file name in driver description. - Add Andy Shevchenko's Reviewed-by tag. Changes for v2: - Use the correct head files for gpio api and of_device_id: #include <linux/gpio/consumer.h> #include <linux/mod_devicetable.h> - Add driver dependency on GPIOLIB drivers/usb/typec/mux/Kconfig | 10 ++++ drivers/usb/typec/mux/Makefile | 1 + drivers/usb/typec/mux/switch-simple.c | 100 ++++++++++++++++++++++++++++++++++ 3 files changed, 111 insertions(+)