Index: usb-devel/drivers/usb/core/hub.c
===================================================================
--- usb-devel.orig/drivers/usb/core/hub.c
+++ usb-devel/drivers/usb/core/hub.c
@@ -2708,8 +2708,7 @@ static unsigned hub_is_wusb(struct usb_h
 #define PORT_RESET_TRIES	5
 #define SET_ADDRESS_TRIES	2
 #define GET_DESCRIPTOR_TRIES	2
-#define SET_CONFIG_TRIES	(2 * (use_both_schemes + 1))
-#define USE_NEW_SCHEME(i, scheme)	((i) / 2 == (int)(scheme))
+#define PORT_INIT_TRIES		4
 
 #define HUB_ROOT_RESET_TIME	60	/* times are in msec */
 #define HUB_SHORT_RESET_TIME	10
@@ -2717,23 +2716,31 @@ static unsigned hub_is_wusb(struct usb_h
 #define HUB_LONG_RESET_TIME	200
 #define HUB_RESET_TIMEOUT	800
 
-/*
- * "New scheme" enumeration causes an extra state transition to be
- * exposed to an xhci host and causes USB3 devices to receive control
- * commands in the default state.  This has been seen to cause
- * enumeration failures, so disable this enumeration scheme for USB3
- * devices.
- */
 static bool use_new_scheme(struct usb_device *udev, int retry,
 			   struct usb_port *port_dev)
 {
 	int old_scheme_first_port =
-		port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME;
+		(port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME) ||
+		old_scheme_first;
 
+	/*
+	 * "New scheme" enumeration causes an extra state transition to be
+	 * exposed to an xhci host and causes USB3 devices to receive control
+	 * commands in the default state.  This has been seen to cause
+	 * enumeration failures, so disable this enumeration scheme for USB3
+	 * devices.
+	 */
 	if (udev->speed >= USB_SPEED_SUPER)
 		return false;
 
-	return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first);
+	/*
+	 * If use_both_schemes is set, use the first scheme (whichever
+	 * it is) for the larger half of the retries, then use the other
+	 * scheme.  Otherwise, use the first scheme for all the retries.
+	 */
+	if (use_both_schemes && retry >= (PORT_INIT_TRIES + 1) / 2)
+		return old_scheme_first_port;	/* Second half */
+	return !old_scheme_first_port;		/* First half or all */
 }
 
 /* Is a USB 3.0 port in the Inactive or Compliance Mode state?
@@ -4545,6 +4552,7 @@ hub_port_init(struct usb_hub *hub, struc
 	const char		*speed;
 	int			devnum = udev->devnum;
 	const char		*driver_name;
+	bool			do_new_scheme;
 
 	/* root hub ports have a slightly longer reset period
 	 * (from USB 2.0 spec, section 7.1.7.5)
@@ -4657,14 +4665,13 @@ hub_port_init(struct usb_hub *hub, struc
 	 * first 8 bytes of the device descriptor to get the ep0 maxpacket
 	 * value.
 	 */
-	for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) {
-		bool did_new_scheme = false;
+	do_new_scheme = use_new_scheme(udev, retry_counter, port_dev);
 
-		if (use_new_scheme(udev, retry_counter, port_dev)) {
+	for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) {
+		if (do_new_scheme) {
 			struct usb_device_descriptor *buf;
 			int r = 0;
 
-			did_new_scheme = true;
 			retval = hub_enable_device(udev);
 			if (retval < 0) {
 				dev_err(&udev->dev,
@@ -4773,11 +4780,7 @@ hub_port_init(struct usb_hub *hub, struc
 			 *  - read ep0 maxpacket even for high and low speed,
 			 */
 			msleep(10);
-			/* use_new_scheme() checks the speed which may have
-			 * changed since the initial look so we cache the result
-			 * in did_new_scheme
-			 */
-			if (did_new_scheme)
+			if (do_new_scheme)
 				break;
 		}
 
@@ -5106,7 +5109,7 @@ static void hub_port_connect(struct usb_
 		unit_load = 100;
 
 	status = 0;
-	for (i = 0; i < SET_CONFIG_TRIES; i++) {
+	for (i = 0; i < PORT_INIT_TRIES; i++) {
 
 		/* reallocate for each attempt, since references
 		 * to the previous one can escape in various ways
@@ -5239,7 +5242,7 @@ loop:
 			break;
 
 		/* When halfway through our retry count, power-cycle the port */
-		if (i == (SET_CONFIG_TRIES / 2) - 1) {
+		if (i == (PORT_INIT_TRIES - 1) / 2) {
 			dev_info(&port_dev->dev, "attempt power cycle\n");
 			usb_hub_set_port_power(hdev, hub, port1, false);
 			msleep(2 * hub_power_on_good_delay(hub));
@@ -5770,7 +5773,7 @@ static int usb_reset_and_verify_device(s
 	bos = udev->bos;
 	udev->bos = NULL;
 
-	for (i = 0; i < SET_CONFIG_TRIES; ++i) {
+	for (i = 0; i < PORT_INIT_TRIES; ++i) {
 
 		/* ep0 maxpacket size may change; let the HCD know about it.
 		 * Other endpoints will be handled by re-enumeration. */
