diff mbox series

[v11,21/34] spi: tegra20-slink: Add OPP support

Message ID 20210912200832.12312-22-digetx@gmail.com
State New
Headers show
Series None | expand

Commit Message

Dmitry Osipenko Sept. 12, 2021, 8:08 p.m. UTC 
The SPI on Tegra belongs to the core power domain and we're going to
enable GENPD support for the core domain. Now SPI driver must use OPP
API for driving the controller's clock rate because OPP API takes care
of reconfiguring the domain's performance state in accordance to the
rate. Add OPP support to the driver.

Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/spi/spi-tegra20-slink.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 8ce840c7ecc8..1a92978d2120 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -18,12 +18,15 @@ 
 #include <linux/kthread.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm_opp.h>
 #include <linux/pm_runtime.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/reset.h>
 #include <linux/spi/spi.h>
 
+#include <soc/tegra/common.h>
+
 #define SLINK_COMMAND			0x000
 #define SLINK_BIT_LENGTH(x)		(((x) & 0x1f) << 0)
 #define SLINK_WORD_SIZE(x)		(((x) & 0x1f) << 5)
@@ -680,7 +683,7 @@  static int tegra_slink_start_transfer_one(struct spi_device *spi,
 	bits_per_word = t->bits_per_word;
 	speed = t->speed_hz;
 	if (speed != tspi->cur_speed) {
-		clk_set_rate(tspi->clk, speed * 4);
+		dev_pm_opp_set_rate(tspi->dev, speed * 4);
 		tspi->cur_speed = speed;
 	}
 
@@ -1082,6 +1085,11 @@  static int tegra_slink_probe(struct platform_device *pdev)
 	init_completion(&tspi->xfer_completion);
 
 	pm_runtime_enable(&pdev->dev);
+
+	ret = devm_tegra_core_dev_init_opp_table_common(&pdev->dev);
+	if (ret)
+		goto exit_pm_disable;
+
 	ret = pm_runtime_resume_and_get(&pdev->dev);
 	if (ret) {
 		dev_err(&pdev->dev, "pm runtime get failed, e = %d\n", ret);