@@ -95,6 +95,35 @@ static int fotg210_gemini_init(struct fotg210 *fotg, struct resource *res,
return 0;
}
+/**
+ * fotg210_vbus() - Called by gadget driver to enable/disable VBUS
+ * @enable: true to enable VBUS, false to disable VBUS
+ */
+void fotg210_vbus(struct fotg210 *fotg, bool enable)
+{
+ u32 mask;
+ u32 val;
+ int ret;
+
+ switch (fotg->port) {
+ case GEMINI_PORT_0:
+ mask = GEMINI_MISC_USB0_VBUS_ON;
+ val = enable ? GEMINI_MISC_USB0_VBUS_ON : 0;
+ break;
+ case GEMINI_PORT_1:
+ mask = GEMINI_MISC_USB1_VBUS_ON;
+ val = enable ? GEMINI_MISC_USB1_VBUS_ON : 0;
+ break;
+ default:
+ return;
+ }
+ ret = regmap_update_bits(fotg->map, GEMINI_GLOBAL_MISC_CTRL, mask, val);
+ if (ret)
+ dev_err(fotg->dev, "failed to %s VBUS\n",
+ enable ? "enable" : "disable");
+ dev_info(fotg->dev, "%s: %s VBUS\n", __func__, enable ? "enable" : "disable");
+}
+
static int fotg210_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1082,9 +1082,26 @@ static int fotg210_udc_stop(struct usb_gadget *g)
return 0;
}
+/**
+ * fotg210_vbus_session - Called by external transceiver to enable/disable udc
+ * @_gadget: usb gadget
+ * @is_active: 0 if should disable UDC VBUS, 1 if should enable
+ *
+ * Returns 0
+ */
+static int fotg210_vbus_session(struct usb_gadget *g, int is_active)
+{
+ struct fotg210_udc *fotg210 = gadget_to_fotg210(g);
+
+ /* Call down to core integration layer to drive or disable VBUS */
+ fotg210_vbus(fotg210->fotg, is_active);
+ return 0;
+}
+
static const struct usb_gadget_ops fotg210_gadget_ops = {
.udc_start = fotg210_udc_start,
.udc_stop = fotg210_udc_stop,
+ .vbus_session = fotg210_vbus_session,
};
/**
@@ -17,6 +17,8 @@ struct fotg210 {
enum gemini_port port;
};
+void fotg210_vbus(struct fotg210 *fotg, bool enable);
+
#ifdef CONFIG_USB_FOTG210_HCD
int fotg210_hcd_probe(struct platform_device *pdev, struct fotg210 *fotg);
int fotg210_hcd_remove(struct platform_device *pdev);
Implement VBUS session handling for FOTG210. This is mainly used by the UDC driver which needs to call down to the FOTG210 core and enable/disable VBUS, as this needs to be handled outside of the HCD and UDC drivers, by platform specific glue code. The Gemini has a special bit in a system register to turn VBUS on and off so we implement this in the FOTG210 core. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/usb/fotg210/fotg210-core.c | 29 +++++++++++++++++++++++++++++ drivers/usb/fotg210/fotg210-udc.c | 17 +++++++++++++++++ drivers/usb/fotg210/fotg210.h | 2 ++ 3 files changed, 48 insertions(+)