From patchwork Mon Dec 11 12:11:24 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 753001 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="O2Dgnx5N" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3A5A7CF; Mon, 11 Dec 2023 04:11:58 -0800 (PST) Received: from pps.filterd (m0279863.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.24/8.17.1.24) with ESMTP id 3BBBuWVl023588; Mon, 11 Dec 2023 12:11:53 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding:content-type; s= qcppdkim1; bh=BMcIK6+tF1WzlJAS4gMMrCiHhLdtiy0eQaT/jyXeihI=; b=O2 Dgnx5NFv6UxXMoOKACJutyLqG3l4k17gpP0pqxmpPx4viUOkD5phYnIY9W5mIfAg 1QIfRR3KLhOOeL5g6DvPVYMzbb+RCy2oaH/pBaQmEU84Pa4UF9Zr7u9FbWUxl7ye ezxScdyw6IGmziURwHEaeclGGpvqA7ip/jxBdDEH5VyFRpyAOSBjN5rWKBBvmNy4 0NOPmarXBz3Qw+sf+jhrd7J8UXf4ujk1mRmgwG3o3uuyenjFbs0domLCjuN0kyRE Ydl/KO1oEf1YX7IkqIt7G8Gela5Oh2kwkywxhE/+VS1cjIO20VevbbqMqiuuQH7i Tb6Gzrl8/VTxCg4Ra/Eg== Received: from nalasppmta04.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uwjyjshes-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 11 Dec 2023 12:11:53 +0000 (GMT) Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 3BBCBqpV005898 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 11 Dec 2023 12:11:52 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.40; Mon, 11 Dec 2023 04:11:47 -0800 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Wesley Cheng , Johan Hovold , Conor Dooley CC: , , , , , , Krishna Kurapati Subject: [PATCH v3 2/2] usb: dwc3: qcom: Rename hs_phy_irq to qusb2_phy_irq Date: Mon, 11 Dec 2023 17:41:24 +0530 Message-ID: <20231211121124.4194-3-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.42.0 In-Reply-To: <20231211121124.4194-1-quic_kriskura@quicinc.com> References: <20231211121124.4194-1-quic_kriskura@quicinc.com> Precedence: bulk X-Mailing-List: linux-usb@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ClientProxiedBy: nasanex01a.na.qualcomm.com (10.52.223.231) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: 0U5SbUCJBZ6u8knha8K-oE2_sjwNtww8 X-Proofpoint-ORIG-GUID: 0U5SbUCJBZ6u8knha8K-oE2_sjwNtww8 X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-09_01,2023-12-07_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 suspectscore=0 mlxscore=0 bulkscore=0 priorityscore=1501 impostorscore=0 malwarescore=0 adultscore=0 clxscore=1015 lowpriorityscore=0 mlxlogscore=722 phishscore=0 spamscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2311290000 definitions=main-2312110098 For wakeup to work, driver needs to enable interrupts that depict what is happening on the DP/DM lines. On QUSB targets, this is identified by qusb2_phy whereas on SoCs using Femto PHY, separate {dp,dm}_hs_phy_irq's are used instead. The implementation incorrectly names qusb2_phy interrupts as "hs_phy_irq". Clean this up so that driver would be using only qusb2/(dp & dm) for wakeup purposes. For devices running older kernels, this won't break any functionality because the interrupt configurations in QUSB2 PHY based SoCs is done by configuring QUSB2PHY_INTR_CTRL register in PHY address space and it was never armed properly right from the start. Signed-off-by: Krishna Kurapati --- drivers/usb/dwc3/dwc3-qcom.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index fdf6d5d3c2ad..dbd6a5b2b289 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -57,7 +57,7 @@ struct dwc3_acpi_pdata { u32 qscratch_base_offset; u32 qscratch_base_size; u32 dwc3_core_base_size; - int hs_phy_irq_index; + int qusb2_phy_irq_index; int dp_hs_phy_irq_index; int dm_hs_phy_irq_index; int ss_phy_irq_index; @@ -73,7 +73,7 @@ struct dwc3_qcom { int num_clocks; struct reset_control *resets; - int hs_phy_irq; + int qusb2_phy_irq; int dp_hs_phy_irq; int dm_hs_phy_irq; int ss_phy_irq; @@ -372,7 +372,7 @@ static void dwc3_qcom_disable_wakeup_irq(int irq) static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) { - dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq); + dwc3_qcom_disable_wakeup_irq(qcom->qusb2_phy_irq); if (qcom->usb2_speed == USB_SPEED_LOW) { dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq); @@ -389,7 +389,7 @@ static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) { - dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq, 0); + dwc3_qcom_enable_wakeup_irq(qcom->qusb2_phy_irq, 0); /* * Configure DP/DM line interrupts based on the USB2 device attached to @@ -542,19 +542,19 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) int irq; int ret; - irq = dwc3_qcom_get_irq(pdev, "hs_phy_irq", - pdata ? pdata->hs_phy_irq_index : -1); + irq = dwc3_qcom_get_irq(pdev, "qusb2_phy", + pdata ? pdata->qusb2_phy_irq_index : -1); if (irq > 0) { /* Keep wakeup interrupts disabled until suspend */ ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, IRQF_ONESHOT | IRQF_NO_AUTOEN, - "qcom_dwc3 HS", qcom); + "qcom_dwc3 QUSB2", qcom); if (ret) { - dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret); + dev_err(qcom->dev, "qusb2_phy_irq failed: %d\n", ret); return ret; } - qcom->hs_phy_irq = irq; + qcom->qusb2_phy_irq = irq; } irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq", @@ -1058,7 +1058,7 @@ static const struct dwc3_acpi_pdata sdm845_acpi_pdata = { .qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET, .qscratch_base_size = SDM845_QSCRATCH_SIZE, .dwc3_core_base_size = SDM845_DWC3_CORE_SIZE, - .hs_phy_irq_index = 1, + .qusb2_phy_irq_index = 1, .dp_hs_phy_irq_index = 4, .dm_hs_phy_irq_index = 3, .ss_phy_irq_index = 2 @@ -1068,7 +1068,7 @@ static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = { .qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET, .qscratch_base_size = SDM845_QSCRATCH_SIZE, .dwc3_core_base_size = SDM845_DWC3_CORE_SIZE, - .hs_phy_irq_index = 1, + .qusb2_phy_irq_index = 1, .dp_hs_phy_irq_index = 4, .dm_hs_phy_irq_index = 3, .ss_phy_irq_index = 2,