| Message ID | 20240322-fp4-tcpm-v1-3-c5644099d57b@fairphone.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add TCPM support for PM7250B and Fairphone 4 | expand |
On 22.03.2024 09:01, Luca Weiss wrote: > Add the required DTS node for the USB VBUS output regulator, which is > available on PM7250B. This will provide the VBUS source to connected > peripherals. > > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> > --- > arch/arm64/boot/dts/qcom/pm7250b.dtsi | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi > index 3bf7cf5d1700..91a046b3529c 100644 > --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi > +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi > @@ -45,6 +45,12 @@ pmic@PM7250B_SID { > #address-cells = <1>; > #size-cells = <0>; > > + pm7250b_vbus: usb-vbus-regulator@1100 { > + compatible = "qcom,pm7250b-vbus-reg", "qcom,pm8150b-vbus-reg"; > + status = "disabled"; > + reg = <0x1100>; Could you fix the ordering here? Konrad
diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi index 3bf7cf5d1700..91a046b3529c 100644 --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi @@ -45,6 +45,12 @@ pmic@PM7250B_SID { #address-cells = <1>; #size-cells = <0>; + pm7250b_vbus: usb-vbus-regulator@1100 { + compatible = "qcom,pm7250b-vbus-reg", "qcom,pm8150b-vbus-reg"; + status = "disabled"; + reg = <0x1100>; + }; + pm7250b_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>;
Add the required DTS node for the USB VBUS output regulator, which is available on PM7250B. This will provide the VBUS source to connected peripherals. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> --- arch/arm64/boot/dts/qcom/pm7250b.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)