From patchwork Fri Feb 26 13:28:27 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 388022 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-19.0 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 157E7C433E6 for ; Fri, 26 Feb 2021 13:31:00 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id B823564EC0 for ; Fri, 26 Feb 2021 13:30:59 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230231AbhBZNal (ORCPT ); Fri, 26 Feb 2021 08:30:41 -0500 Received: from mail.kernel.org ([198.145.29.99]:53114 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230175AbhBZNaC (ORCPT ); Fri, 26 Feb 2021 08:30:02 -0500 Received: by mail.kernel.org (Postfix) with ESMTPSA id 4842D64E02; Fri, 26 Feb 2021 13:28:37 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1614346117; bh=EqAVE00Bhz2V0/BrUrgzI2CYbOwiHkLvZwBESOfbHNY=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=o8p3JYeVFnA9wIi8kzEOPMYMR2k6RHeUIqPsOZrYI36hh5FIzScJlhhvJ/kUCVRMI OMrVnaH3SohLY+DbfIKvUG31Jby8S4QV8hGVvuID3v0TEEqNbb5auDCcbyTPWNaxAq jwYt1/Fupbq2xYMsHoek/2JHemKC1zvDMnzEap26Uier2RbPqsz1uUzOwjzlYiZyMq PtkqDgL8QTu8UGgWBCxYOvEJSTnWOhANm2jhPaV91GVlN3j55uHT4q5Zybqisp1B54 BV0RS7bhfUYs+26n8zlEVAnTmdm49Xf5JBeaF4Mr1Kv+Wo1XQRP+RMRoc3FFBfe2vU hdegWWszLodBw== Received: by mail.kernel.org with local (Exim 4.94) (envelope-from ) id 1lFdAY-002nbq-IH; Fri, 26 Feb 2021 14:28:34 +0100 From: Mauro Carvalho Chehab To: Johan Hovold Cc: Mauro Carvalho Chehab , Greg Kroah-Hartman , linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org Subject: [PATCH 1/7] USB: serial: xr: simplify its namespace Date: Fri, 26 Feb 2021 14:28:27 +0100 Message-Id: X-Mailer: git-send-email 2.29.2 In-Reply-To: References: MIME-Version: 1.0 Sender: Mauro Carvalho Chehab Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org There are several registers that work with different models of this chipset. Simplify their namespaces. No functional changes. Signed-off-by: Mauro Carvalho Chehab --- drivers/usb/serial/xr_serial.c | 224 ++++++++++++++++----------------- 1 file changed, 112 insertions(+), 112 deletions(-) diff --git a/drivers/usb/serial/xr_serial.c b/drivers/usb/serial/xr_serial.c index 0ca04906da4b..169c7ef11d73 100644 --- a/drivers/usb/serial/xr_serial.c +++ b/drivers/usb/serial/xr_serial.c @@ -25,73 +25,73 @@ struct xr_txrx_clk_mask { }; #define XR_INT_OSC_HZ 48000000U -#define XR21V141X_MIN_SPEED 46U -#define XR21V141X_MAX_SPEED XR_INT_OSC_HZ +#define MIN_SPEED 46U +#define MAX_SPEED XR_INT_OSC_HZ /* USB Requests */ -#define XR21V141X_SET_REQ 0 -#define XR21V141X_GET_REQ 1 - -#define XR21V141X_CLOCK_DIVISOR_0 0x04 -#define XR21V141X_CLOCK_DIVISOR_1 0x05 -#define XR21V141X_CLOCK_DIVISOR_2 0x06 -#define XR21V141X_TX_CLOCK_MASK_0 0x07 -#define XR21V141X_TX_CLOCK_MASK_1 0x08 -#define XR21V141X_RX_CLOCK_MASK_0 0x09 -#define XR21V141X_RX_CLOCK_MASK_1 0x0a - -/* XR21V141X register blocks */ -#define XR21V141X_UART_REG_BLOCK 0 -#define XR21V141X_UM_REG_BLOCK 4 -#define XR21V141X_UART_CUSTOM_BLOCK 0x66 - -/* XR21V141X UART Manager Registers */ -#define XR21V141X_UM_FIFO_ENABLE_REG 0x10 -#define XR21V141X_UM_ENABLE_TX_FIFO 0x01 -#define XR21V141X_UM_ENABLE_RX_FIFO 0x02 - -#define XR21V141X_UM_RX_FIFO_RESET 0x18 -#define XR21V141X_UM_TX_FIFO_RESET 0x1c - -#define XR21V141X_UART_ENABLE_TX 0x1 -#define XR21V141X_UART_ENABLE_RX 0x2 - -#define XR21V141X_UART_MODE_RI BIT(0) -#define XR21V141X_UART_MODE_CD BIT(1) -#define XR21V141X_UART_MODE_DSR BIT(2) -#define XR21V141X_UART_MODE_DTR BIT(3) -#define XR21V141X_UART_MODE_CTS BIT(4) -#define XR21V141X_UART_MODE_RTS BIT(5) - -#define XR21V141X_UART_BREAK_ON 0xff -#define XR21V141X_UART_BREAK_OFF 0 - -#define XR21V141X_UART_DATA_MASK GENMASK(3, 0) -#define XR21V141X_UART_DATA_7 0x7 -#define XR21V141X_UART_DATA_8 0x8 - -#define XR21V141X_UART_PARITY_MASK GENMASK(6, 4) -#define XR21V141X_UART_PARITY_SHIFT 4 -#define XR21V141X_UART_PARITY_NONE (0x0 << XR21V141X_UART_PARITY_SHIFT) -#define XR21V141X_UART_PARITY_ODD (0x1 << XR21V141X_UART_PARITY_SHIFT) -#define XR21V141X_UART_PARITY_EVEN (0x2 << XR21V141X_UART_PARITY_SHIFT) -#define XR21V141X_UART_PARITY_MARK (0x3 << XR21V141X_UART_PARITY_SHIFT) -#define XR21V141X_UART_PARITY_SPACE (0x4 << XR21V141X_UART_PARITY_SHIFT) - -#define XR21V141X_UART_STOP_MASK BIT(7) -#define XR21V141X_UART_STOP_SHIFT 7 -#define XR21V141X_UART_STOP_1 (0x0 << XR21V141X_UART_STOP_SHIFT) -#define XR21V141X_UART_STOP_2 (0x1 << XR21V141X_UART_STOP_SHIFT) - -#define XR21V141X_UART_FLOW_MODE_NONE 0x0 -#define XR21V141X_UART_FLOW_MODE_HW 0x1 -#define XR21V141X_UART_FLOW_MODE_SW 0x2 - -#define XR21V141X_UART_MODE_GPIO_MASK GENMASK(2, 0) -#define XR21V141X_UART_MODE_RTS_CTS 0x1 -#define XR21V141X_UART_MODE_DTR_DSR 0x2 -#define XR21V141X_UART_MODE_RS485 0x3 -#define XR21V141X_UART_MODE_RS485_ADDR 0x4 +#define SET_REQ 0 +#define GET_REQ 1 + +#define CLOCK_DIVISOR_0 0x04 +#define CLOCK_DIVISOR_1 0x05 +#define CLOCK_DIVISOR_2 0x06 +#define TX_CLOCK_MASK_0 0x07 +#define TX_CLOCK_MASK_1 0x08 +#define RX_CLOCK_MASK_0 0x09 +#define RX_CLOCK_MASK_1 0x0a + +/* Register blocks */ +#define UART_REG_BLOCK 0 +#define UM_REG_BLOCK 4 +#define UART_CUSTOM_BLOCK 0x66 + +/* UART Manager Registers */ +#define UM_FIFO_ENABLE_REG 0x10 +#define UM_ENABLE_TX_FIFO 0x01 +#define UM_ENABLE_RX_FIFO 0x02 + +#define UM_RX_FIFO_RESET 0x18 +#define UM_TX_FIFO_RESET 0x1c + +#define UART_ENABLE_TX 0x1 +#define UART_ENABLE_RX 0x2 + +#define UART_MODE_RI BIT(0) +#define UART_MODE_CD BIT(1) +#define UART_MODE_DSR BIT(2) +#define UART_MODE_DTR BIT(3) +#define UART_MODE_CTS BIT(4) +#define UART_MODE_RTS BIT(5) + +#define UART_BREAK_ON 0xff +#define UART_BREAK_OFF 0 + +#define UART_DATA_MASK GENMASK(3, 0) +#define UART_DATA_7 0x7 +#define UART_DATA_8 0x8 + +#define UART_PARITY_MASK GENMASK(6, 4) +#define UART_PARITY_SHIFT 4 +#define UART_PARITY_NONE (0x0 << UART_PARITY_SHIFT) +#define UART_PARITY_ODD (0x1 << UART_PARITY_SHIFT) +#define UART_PARITY_EVEN (0x2 << UART_PARITY_SHIFT) +#define UART_PARITY_MARK (0x3 << UART_PARITY_SHIFT) +#define UART_PARITY_SPACE (0x4 << UART_PARITY_SHIFT) + +#define UART_STOP_MASK BIT(7) +#define UART_STOP_SHIFT 7 +#define UART_STOP_1 (0x0 << UART_STOP_SHIFT) +#define UART_STOP_2 (0x1 << UART_STOP_SHIFT) + +#define UART_FLOW_MODE_NONE 0x0 +#define UART_FLOW_MODE_HW 0x1 +#define UART_FLOW_MODE_SW 0x2 + +#define UART_MODE_GPIO_MASK GENMASK(2, 0) +#define UART_MODE_RTS_CTS 0x1 +#define UART_MODE_DTR_DSR 0x2 +#define UART_MODE_RS485 0x3 +#define UART_MODE_RS485_ADDR 0x4 #define XR21V141X_REG_ENABLE 0x03 #define XR21V141X_REG_FORMAT 0x0b @@ -115,7 +115,7 @@ static int xr_set_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 val) ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - XR21V141X_SET_REQ, + SET_REQ, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, val, reg | (block << 8), NULL, 0, USB_CTRL_SET_TIMEOUT); @@ -139,7 +139,7 @@ static int xr_get_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 *val) ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - XR21V141X_GET_REQ, + GET_REQ, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, reg | (block << 8), dmabuf, 1, USB_CTRL_GET_TIMEOUT); @@ -159,17 +159,17 @@ static int xr_get_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 *val) static int xr_set_reg_uart(struct usb_serial_port *port, u8 reg, u8 val) { - return xr_set_reg(port, XR21V141X_UART_REG_BLOCK, reg, val); + return xr_set_reg(port, UART_REG_BLOCK, reg, val); } static int xr_get_reg_uart(struct usb_serial_port *port, u8 reg, u8 *val) { - return xr_get_reg(port, XR21V141X_UART_REG_BLOCK, reg, val); + return xr_get_reg(port, UART_REG_BLOCK, reg, val); } static int xr_set_reg_um(struct usb_serial_port *port, u8 reg, u8 val) { - return xr_set_reg(port, XR21V141X_UM_REG_BLOCK, reg, val); + return xr_set_reg(port, UM_REG_BLOCK, reg, val); } /* @@ -184,18 +184,18 @@ static int xr_uart_enable(struct usb_serial_port *port) { int ret; - ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG, - XR21V141X_UM_ENABLE_TX_FIFO); + ret = xr_set_reg_um(port, UM_FIFO_ENABLE_REG, + UM_ENABLE_TX_FIFO); if (ret) return ret; ret = xr_set_reg_uart(port, XR21V141X_REG_ENABLE, - XR21V141X_UART_ENABLE_TX | XR21V141X_UART_ENABLE_RX); + UART_ENABLE_TX | UART_ENABLE_RX); if (ret) return ret; - ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG, - XR21V141X_UM_ENABLE_TX_FIFO | XR21V141X_UM_ENABLE_RX_FIFO); + ret = xr_set_reg_um(port, UM_FIFO_ENABLE_REG, + UM_ENABLE_TX_FIFO | UM_ENABLE_RX_FIFO); if (ret) xr_set_reg_uart(port, XR21V141X_REG_ENABLE, 0); @@ -211,7 +211,7 @@ static int xr_uart_disable(struct usb_serial_port *port) if (ret) return ret; - ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG, 0); + ret = xr_set_reg_um(port, UM_FIFO_ENABLE_REG, 0); return ret; } @@ -230,12 +230,12 @@ static int xr_tiocmget(struct tty_struct *tty) * Modem control pins are active low, so reading '0' means it is active * and '1' means not active. */ - ret = ((status & XR21V141X_UART_MODE_DTR) ? 0 : TIOCM_DTR) | - ((status & XR21V141X_UART_MODE_RTS) ? 0 : TIOCM_RTS) | - ((status & XR21V141X_UART_MODE_CTS) ? 0 : TIOCM_CTS) | - ((status & XR21V141X_UART_MODE_DSR) ? 0 : TIOCM_DSR) | - ((status & XR21V141X_UART_MODE_RI) ? 0 : TIOCM_RI) | - ((status & XR21V141X_UART_MODE_CD) ? 0 : TIOCM_CD); + ret = ((status & UART_MODE_DTR) ? 0 : TIOCM_DTR) | + ((status & UART_MODE_RTS) ? 0 : TIOCM_RTS) | + ((status & UART_MODE_CTS) ? 0 : TIOCM_CTS) | + ((status & UART_MODE_DSR) ? 0 : TIOCM_DSR) | + ((status & UART_MODE_RI) ? 0 : TIOCM_RI) | + ((status & UART_MODE_CD) ? 0 : TIOCM_CD); return ret; } @@ -249,13 +249,13 @@ static int xr_tiocmset_port(struct usb_serial_port *port, /* Modem control pins are active low, so set & clr are swapped */ if (set & TIOCM_RTS) - gpio_clr |= XR21V141X_UART_MODE_RTS; + gpio_clr |= UART_MODE_RTS; if (set & TIOCM_DTR) - gpio_clr |= XR21V141X_UART_MODE_DTR; + gpio_clr |= UART_MODE_DTR; if (clear & TIOCM_RTS) - gpio_set |= XR21V141X_UART_MODE_RTS; + gpio_set |= UART_MODE_RTS; if (clear & TIOCM_DTR) - gpio_set |= XR21V141X_UART_MODE_DTR; + gpio_set |= UART_MODE_DTR; /* Writing '0' to gpio_{set/clr} bits has no effect, so no need to do */ if (gpio_clr) @@ -289,12 +289,12 @@ static void xr_break_ctl(struct tty_struct *tty, int break_state) u8 state; if (break_state == 0) - state = XR21V141X_UART_BREAK_OFF; + state = UART_BREAK_OFF; else - state = XR21V141X_UART_BREAK_ON; + state = UART_BREAK_ON; dev_dbg(&port->dev, "Turning break %s\n", - state == XR21V141X_UART_BREAK_OFF ? "off" : "on"); + state == UART_BREAK_OFF ? "off" : "on"); xr_set_reg_uart(port, XR21V141X_REG_TX_BREAK, state); } @@ -345,7 +345,7 @@ static int xr_set_baudrate(struct tty_struct *tty, if (!baud) return 0; - baud = clamp(baud, XR21V141X_MIN_SPEED, XR21V141X_MAX_SPEED); + baud = clamp(baud, MIN_SPEED, MAX_SPEED); divisor = XR_INT_OSC_HZ / baud; idx = ((32 * XR_INT_OSC_HZ) / baud) & 0x1f; tx_mask = xr21v141x_txrx_clk_masks[idx].tx; @@ -361,37 +361,37 @@ static int xr_set_baudrate(struct tty_struct *tty, * oscillator and 19-bit programmable divisor. So theoretically it can * generate most commonly used baud rates with high accuracy. */ - ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_0, + ret = xr_set_reg_uart(port, CLOCK_DIVISOR_0, divisor & 0xff); if (ret) return ret; - ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_1, + ret = xr_set_reg_uart(port, CLOCK_DIVISOR_1, (divisor >> 8) & 0xff); if (ret) return ret; - ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_2, + ret = xr_set_reg_uart(port, CLOCK_DIVISOR_2, (divisor >> 16) & 0xff); if (ret) return ret; - ret = xr_set_reg_uart(port, XR21V141X_TX_CLOCK_MASK_0, + ret = xr_set_reg_uart(port, TX_CLOCK_MASK_0, tx_mask & 0xff); if (ret) return ret; - ret = xr_set_reg_uart(port, XR21V141X_TX_CLOCK_MASK_1, + ret = xr_set_reg_uart(port, TX_CLOCK_MASK_1, (tx_mask >> 8) & 0xff); if (ret) return ret; - ret = xr_set_reg_uart(port, XR21V141X_RX_CLOCK_MASK_0, + ret = xr_set_reg_uart(port, RX_CLOCK_MASK_0, rx_mask & 0xff); if (ret) return ret; - ret = xr_set_reg_uart(port, XR21V141X_RX_CLOCK_MASK_1, + ret = xr_set_reg_uart(port, RX_CLOCK_MASK_1, (rx_mask >> 8) & 0xff); if (ret) return ret; @@ -413,24 +413,24 @@ static void xr_set_flow_mode(struct tty_struct *tty, return; /* Set GPIO mode for controlling the pins manually by default. */ - gpio_mode &= ~XR21V141X_UART_MODE_GPIO_MASK; + gpio_mode &= ~UART_MODE_GPIO_MASK; if (C_CRTSCTS(tty) && C_BAUD(tty) != B0) { dev_dbg(&port->dev, "Enabling hardware flow ctrl\n"); - gpio_mode |= XR21V141X_UART_MODE_RTS_CTS; - flow = XR21V141X_UART_FLOW_MODE_HW; + gpio_mode |= UART_MODE_RTS_CTS; + flow = UART_FLOW_MODE_HW; } else if (I_IXON(tty)) { u8 start_char = START_CHAR(tty); u8 stop_char = STOP_CHAR(tty); dev_dbg(&port->dev, "Enabling sw flow ctrl\n"); - flow = XR21V141X_UART_FLOW_MODE_SW; + flow = UART_FLOW_MODE_SW; xr_set_reg_uart(port, XR21V141X_REG_XON_CHAR, start_char); xr_set_reg_uart(port, XR21V141X_REG_XOFF_CHAR, stop_char); } else { dev_dbg(&port->dev, "Disabling flow ctrl\n"); - flow = XR21V141X_UART_FLOW_MODE_NONE; + flow = UART_FLOW_MODE_NONE; } /* @@ -468,35 +468,35 @@ static void xr_set_termios(struct tty_struct *tty, if (old_termios) termios->c_cflag |= old_termios->c_cflag & CSIZE; else - bits |= XR21V141X_UART_DATA_8; + bits |= UART_DATA_8; break; case CS7: - bits |= XR21V141X_UART_DATA_7; + bits |= UART_DATA_7; break; case CS8: default: - bits |= XR21V141X_UART_DATA_8; + bits |= UART_DATA_8; break; } if (C_PARENB(tty)) { if (C_CMSPAR(tty)) { if (C_PARODD(tty)) - bits |= XR21V141X_UART_PARITY_MARK; + bits |= UART_PARITY_MARK; else - bits |= XR21V141X_UART_PARITY_SPACE; + bits |= UART_PARITY_SPACE; } else { if (C_PARODD(tty)) - bits |= XR21V141X_UART_PARITY_ODD; + bits |= UART_PARITY_ODD; else - bits |= XR21V141X_UART_PARITY_EVEN; + bits |= UART_PARITY_EVEN; } } if (C_CSTOPB(tty)) - bits |= XR21V141X_UART_STOP_2; + bits |= UART_STOP_2; else - bits |= XR21V141X_UART_STOP_1; + bits |= UART_STOP_1; ret = xr_set_reg_uart(port, XR21V141X_REG_FORMAT, bits); if (ret) @@ -520,7 +520,7 @@ static int xr_open(struct tty_struct *tty, struct usb_serial_port *port) * Configure DTR and RTS as outputs and RI, CD, DSR and CTS as * inputs. */ - gpio_dir = XR21V141X_UART_MODE_DTR | XR21V141X_UART_MODE_RTS; + gpio_dir = UART_MODE_DTR | UART_MODE_RTS; xr_set_reg_uart(port, XR21V141X_REG_GPIO_DIR, gpio_dir); /* Setup termios */