| Message ID | 20220825083256.14565-5-alice.guo@oss.nxp.com |
|---|---|
| State | New |
| Headers | show |
| Series | watchdog: imx7ulp_wdt: update i.MX7ULP WDOG timer driver | expand |
On Thu, Aug 25, 2022 at 04:32:53PM +0800, Alice Guo (OSS) wrote: > From: Ye Li <ye.li@nxp.com> > > According to measure on i.MX7ULP and i.MX8ULP, the RCS done needs > about 3400us and 6700us respectively. So current 20us timeout is > not enough. When reconfiguring is on-going, unlock and configure CS > will lead to unknown result. > > Increase the wait timeout value to 10ms and check the return value > of RCS wait to fix the issue > > Signed-off-by: Ye Li <ye.li@nxp.com> > Signed-off-by: Alice Guo <alice.guo@nxp.com> > Reviewed-by: Jacky Bai <ping.bai@nxp.com> > Acked-by: Jason Liu <jason.hui.liu@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> > --- > > Changes for v2: > - none > > drivers/watchdog/imx7ulp_wdt.c | 8 +++++--- > 1 file changed, 5 insertions(+), 3 deletions(-) > > diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c > index a0f6b8cea78f..12715c248688 100644 > --- a/drivers/watchdog/imx7ulp_wdt.c > +++ b/drivers/watchdog/imx7ulp_wdt.c > @@ -39,7 +39,7 @@ > #define DEFAULT_TIMEOUT 60 > #define MAX_TIMEOUT 128 > #define WDOG_CLOCK_RATE 1000 > -#define WDOG_WAIT_TIMEOUT 20 > +#define WDOG_WAIT_TIMEOUT 10000 > > static bool nowayout = WATCHDOG_NOWAYOUT; > module_param(nowayout, bool, 0000); > @@ -80,7 +80,7 @@ static int imx7ulp_wdt_enable(struct watchdog_device *wdog, bool enable) > writel(val | WDOG_CS_EN, wdt->base + WDOG_CS); > else > writel(val & ~WDOG_CS_EN, wdt->base + WDOG_CS); > - imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS); > + ret = imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS); > > enable_out: > local_irq_enable(); > @@ -127,7 +127,9 @@ static int imx7ulp_wdt_set_timeout(struct watchdog_device *wdog, > if (ret) > goto timeout_out; > writel(val, wdt->base + WDOG_TOVAL); > - imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS); > + ret = imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS); > + if (ret) > + goto timeout_out; > > wdog->timeout = timeout; > > -- > 2.17.1 >
diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c index a0f6b8cea78f..12715c248688 100644 --- a/drivers/watchdog/imx7ulp_wdt.c +++ b/drivers/watchdog/imx7ulp_wdt.c @@ -39,7 +39,7 @@ #define DEFAULT_TIMEOUT 60 #define MAX_TIMEOUT 128 #define WDOG_CLOCK_RATE 1000 -#define WDOG_WAIT_TIMEOUT 20 +#define WDOG_WAIT_TIMEOUT 10000 static bool nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, bool, 0000); @@ -80,7 +80,7 @@ static int imx7ulp_wdt_enable(struct watchdog_device *wdog, bool enable) writel(val | WDOG_CS_EN, wdt->base + WDOG_CS); else writel(val & ~WDOG_CS_EN, wdt->base + WDOG_CS); - imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS); + ret = imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS); enable_out: local_irq_enable(); @@ -127,7 +127,9 @@ static int imx7ulp_wdt_set_timeout(struct watchdog_device *wdog, if (ret) goto timeout_out; writel(val, wdt->base + WDOG_TOVAL); - imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS); + ret = imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS); + if (ret) + goto timeout_out; wdog->timeout = timeout;