mbox series

[v5,00/17] wifi: cc33xx: Add driver for new TI CC33xx wireless device family

Message ID 20241107125209.1736277-1-michael.nemanov@ti.com
Headers show
Series wifi: cc33xx: Add driver for new TI CC33xx wireless device family | expand

Message

Nemanov, Michael Nov. 7, 2024, 12:51 p.m. UTC
Hello everyone,

This series adds support for CC33xx which is a new family of WLAN IEEE802.11 a/b/g/n/ax
and BLE 5.4 transceivers by Texas Instruments. These devices are 20MHz single spatial stream
enabling STA (IEEE802.11ax) and AP (IEEE802.11n only) roles as well as both roles simultaneously.
Communication to the CC33xx is done via 4-bit SDIO with two extra GPIOs: Enable and Interrupt.

This driver's architecture is a soft-MAC and derivative of existing wl18xx + wlcore code [1].
It has been tested with the AM335x, AM625x, and i.MX8-MP evaluation kits.

Data sheet: https://www.ti.com/lit/gpn/cc3301

All code passes sparse, smatch, coccicheck and checkpatch with very few pragmatic exceptions.

Driver is split on file boundary as required by Linux-wireless wiki:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches#new_driver


Change log:
v5:
* Moved all internal definitions from scan.h to scan.c
* DT bindings now describe CC3300 as the base variant. Other variants are compatible.
* Moved MODULE_DEVICE_TABLE next to device list in sdio.c
* Minor warning fixes

v4:
* Fixed DT compatibility for all CC33xx variants. Improved general formatting
* Refactored sdio.c to better align with other SDIO drivers
* Removed multiple debug traces
Link: https://lore.kernel.org/linux-wireless/20241029172354.4027886-1-michael.nemanov@ti.com/

v3:
* Added missing sign-offs
* Fixed multiple warnings for memcpy overflow
* Fixed commit message and description of device-tree bindings
Link: https://lore.kernel.org/linux-wireless/20240806170018.638585-1-michael.nemanov@ti.com/

v2:
* Fixed build bug on non-ARM architectures
* Removed driver version
* Removed trivial debug traces
* Removed debug parameters for cc33xx module
* Fixed multiple type compatibility warnings
* Minor fixes
Link: https://lore.kernel.org/linux-wireless/20240609182102.2950457-1-michael.nemanov@ti.com/

v1:
* Added dt-bindings
* Removed debugfs to ease review
* Fix build issue with CONFIG_CFG80211_CERTIFICATION_ONUS
* Fix multiple build warnings found with Clang 18 and W=12
Link: https://lore.kernel.org/linux-wireless/20240521171841.884576-1-michael.nemanov@ti.com/


Test log:
https://0x0.st/XDM9.log

[1] It was considered implementing CC33xx as another user of wlcore but The
differences in HW, host interface, IRQ functionality, Rx/Tx behavior and supported features
were too significant so this was abandoned.

Michael Nemanov
Texas Instruments

Michael Nemanov (17):
  dt-bindings: net: wireless: cc33xx: Add ti,cc33xx.yaml
  wifi: cc33xx: Add cc33xx.h, cc33xx_i.h
  wifi: cc33xx: Add debug.h
  wifi: cc33xx: Add sdio.c, io.c, io.h
  wifi: cc33xx: Add cmd.c, cmd.h
  wifi: cc33xx: Add acx.c, acx.h
  wifi: cc33xx: Add event.c, event.h
  wifi: cc33xx: Add boot.c, boot.h
  wifi: cc33xx: Add main.c
  wifi: cc33xx: Add rx.c, rx.h
  wifi: cc33xx: Add tx.c, tx.h
  wifi: cc33xx: Add init.c, init.h
  wifi: cc33xx: Add scan.c, scan.h
  wifi: cc33xx: Add conf.h
  wifi: cc33xx: Add ps.c, ps.h
  wifi: cc33xx: Add testmode.c, testmode.h
  wifi: cc33xx: Add Kconfig, Makefile

 .../bindings/net/wireless/ti,cc33xx.yaml      |   59 +
 drivers/net/wireless/ti/Kconfig               |    1 +
 drivers/net/wireless/ti/Makefile              |    1 +
 drivers/net/wireless/ti/cc33xx/Kconfig        |   24 +
 drivers/net/wireless/ti/cc33xx/Makefile       |   10 +
 drivers/net/wireless/ti/cc33xx/acx.c          |  931 +++
 drivers/net/wireless/ti/cc33xx/acx.h          |  835 +++
 drivers/net/wireless/ti/cc33xx/boot.c         |  345 +
 drivers/net/wireless/ti/cc33xx/boot.h         |   24 +
 drivers/net/wireless/ti/cc33xx/cc33xx.h       |  483 ++
 drivers/net/wireless/ti/cc33xx/cc33xx_i.h     |  459 ++
 drivers/net/wireless/ti/cc33xx/cmd.c          | 1920 ++++++
 drivers/net/wireless/ti/cc33xx/cmd.h          |  700 ++
 drivers/net/wireless/ti/cc33xx/conf.h         | 1246 ++++
 drivers/net/wireless/ti/cc33xx/debug.h        |   92 +
 drivers/net/wireless/ti/cc33xx/event.c        |  362 ++
 drivers/net/wireless/ti/cc33xx/event.h        |   71 +
 drivers/net/wireless/ti/cc33xx/init.c         |  231 +
 drivers/net/wireless/ti/cc33xx/init.h         |   15 +
 drivers/net/wireless/ti/cc33xx/io.c           |  129 +
 drivers/net/wireless/ti/cc33xx/io.h           |   26 +
 drivers/net/wireless/ti/cc33xx/main.c         | 5687 +++++++++++++++++
 drivers/net/wireless/ti/cc33xx/ps.c           |  108 +
 drivers/net/wireless/ti/cc33xx/ps.h           |   16 +
 drivers/net/wireless/ti/cc33xx/rx.c           |  388 ++
 drivers/net/wireless/ti/cc33xx/rx.h           |   86 +
 drivers/net/wireless/ti/cc33xx/scan.c         |  900 +++
 drivers/net/wireless/ti/cc33xx/scan.h         |   33 +
 drivers/net/wireless/ti/cc33xx/sdio.c         |  530 ++
 drivers/net/wireless/ti/cc33xx/testmode.c     |  349 +
 drivers/net/wireless/ti/cc33xx/testmode.h     |   12 +
 drivers/net/wireless/ti/cc33xx/tx.c           | 1409 ++++
 drivers/net/wireless/ti/cc33xx/tx.h           |  160 +
 33 files changed, 17642 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,cc33xx.yaml
 create mode 100644 drivers/net/wireless/ti/cc33xx/Kconfig
 create mode 100644 drivers/net/wireless/ti/cc33xx/Makefile
 create mode 100644 drivers/net/wireless/ti/cc33xx/acx.c
 create mode 100644 drivers/net/wireless/ti/cc33xx/acx.h
 create mode 100644 drivers/net/wireless/ti/cc33xx/boot.c
 create mode 100644 drivers/net/wireless/ti/cc33xx/boot.h
 create mode 100644 drivers/net/wireless/ti/cc33xx/cc33xx.h
 create mode 100644 drivers/net/wireless/ti/cc33xx/cc33xx_i.h
 create mode 100644 drivers/net/wireless/ti/cc33xx/cmd.c
 create mode 100644 drivers/net/wireless/ti/cc33xx/cmd.h
 create mode 100644 drivers/net/wireless/ti/cc33xx/conf.h
 create mode 100644 drivers/net/wireless/ti/cc33xx/debug.h
 create mode 100644 drivers/net/wireless/ti/cc33xx/event.c
 create mode 100644 drivers/net/wireless/ti/cc33xx/event.h
 create mode 100644 drivers/net/wireless/ti/cc33xx/init.c
 create mode 100644 drivers/net/wireless/ti/cc33xx/init.h
 create mode 100644 drivers/net/wireless/ti/cc33xx/io.c
 create mode 100644 drivers/net/wireless/ti/cc33xx/io.h
 create mode 100644 drivers/net/wireless/ti/cc33xx/main.c
 create mode 100644 drivers/net/wireless/ti/cc33xx/ps.c
 create mode 100644 drivers/net/wireless/ti/cc33xx/ps.h
 create mode 100644 drivers/net/wireless/ti/cc33xx/rx.c
 create mode 100644 drivers/net/wireless/ti/cc33xx/rx.h
 create mode 100644 drivers/net/wireless/ti/cc33xx/scan.c
 create mode 100644 drivers/net/wireless/ti/cc33xx/scan.h
 create mode 100644 drivers/net/wireless/ti/cc33xx/sdio.c
 create mode 100644 drivers/net/wireless/ti/cc33xx/testmode.c
 create mode 100644 drivers/net/wireless/ti/cc33xx/testmode.h
 create mode 100644 drivers/net/wireless/ti/cc33xx/tx.c
 create mode 100644 drivers/net/wireless/ti/cc33xx/tx.h

Comments

Krzysztof Kozlowski Nov. 8, 2024, 12:02 p.m. UTC | #1
On Thu, Nov 07, 2024 at 02:51:53PM +0200, Michael Nemanov wrote:
> Add device-tree bindings for the CC33xx family.
> 
> Signed-off-by: Michael Nemanov <michael.nemanov@ti.com>
> ---
>  .../bindings/net/wireless/ti,cc33xx.yaml      | 59 +++++++++++++++++++
>  1 file changed, 59 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,cc33xx.yaml
> 

<form letter>
This is a friendly reminder during the review process.

It seems my or other reviewer's previous comments were not fully
addressed. Maybe the feedback got lost between the quotes, maybe you
just forgot to apply it. Please go back to the previous discussion and
either implement all requested changes or keep discussing them.

Thank you.
</form letter>

Best regards,
Krzysztof
Krzysztof Kozlowski Nov. 8, 2024, 12:07 p.m. UTC | #2
On 07/11/2024 13:51, Michael Nemanov wrote:
> Add device-tree bindings for the CC33xx family.
> 
> Signed-off-by: Michael Nemanov <michael.nemanov@ti.com>
> ---
>  .../bindings/net/wireless/ti,cc33xx.yaml      | 59 +++++++++++++++++++
>  1 file changed, 59 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,cc33xx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/wireless/ti,cc33xx.yaml b/Documentation/devicetree/bindings/net/wireless/ti,cc33xx.yaml
> new file mode 100644
> index 000000000000..fd6e1ee8426e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/wireless/ti,cc33xx.yaml
> @@ -0,0 +1,59 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/wireless/ti,cc33xx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments CC33xx Wireless LAN Controller
> +
> +maintainers:
> +  - Michael Nemanov <michael.nemanov@ti.com>
> +
> +description:
> +  The CC33xx is a family of IEEE 802.11ax chips from Texas Instruments.
> +  These chips must be connected via SDIO and support in-band / out-of-band IRQ.
> +
> +properties:
> +  $nodename:
> +    pattern: "^wifi@2"

As I asked, drop.

Best regards,
Krzysztof
Nemanov, Michael Nov. 12, 2024, 6:45 a.m. UTC | #3
On 11/8/2024 2:02 PM, Krzysztof Kozlowski wrote:
> On Thu, Nov 07, 2024 at 02:51:53PM +0200, Michael Nemanov wrote:
>> Add device-tree bindings for the CC33xx family.
>>
>> Signed-off-by: Michael Nemanov <michael.nemanov@ti.com>
>> ---
>>   .../bindings/net/wireless/ti,cc33xx.yaml      | 59 +++++++++++++++++++
>>   1 file changed, 59 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,cc33xx.yaml
>>
> 
> <form letter>
> This is a friendly reminder during the review process.
> 
> It seems my or other reviewer's previous comments were not fully
> addressed. Maybe the feedback got lost between the quotes, maybe you
> just forgot to apply it. Please go back to the previous discussion and
> either implement all requested changes or keep discussing them.
> 
> Thank you.
> </form letter>
> 
> Best regards,
> Krzysztof
> 

Are you referring to

> diff --git a/Documentation/devicetree/bindings/net/wireless/ti,cc33xx.yaml b/Documentation/devicetree/bindings/net/wireless/ti,cc33xx.yaml

...

> +
> +properties:
> +  $nodename:
> +    pattern: "^wifi@2"

?

If so, I replied here
https://lore.kernel.org/linux-wireless/8024aa1c-5bd1-40d8-b0c3-14b5fcd992e2@ti.com/#t
But if you don't think it's worthwhile I'll remove it.

Regards,
Michael.
Krzysztof Kozlowski Nov. 19, 2024, 9:15 a.m. UTC | #4
On 12/11/2024 07:45, Nemanov, Michael wrote:
> On 11/8/2024 2:02 PM, Krzysztof Kozlowski wrote:
>> On Thu, Nov 07, 2024 at 02:51:53PM +0200, Michael Nemanov wrote:
>>> Add device-tree bindings for the CC33xx family.
>>>
>>> Signed-off-by: Michael Nemanov <michael.nemanov@ti.com>
>>> ---
>>>   .../bindings/net/wireless/ti,cc33xx.yaml      | 59 +++++++++++++++++++
>>>   1 file changed, 59 insertions(+)
>>>   create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,cc33xx.yaml
>>>
>>
>> <form letter>
>> This is a friendly reminder during the review process.
>>
>> It seems my or other reviewer's previous comments were not fully
>> addressed. Maybe the feedback got lost between the quotes, maybe you
>> just forgot to apply it. Please go back to the previous discussion and
>> either implement all requested changes or keep discussing them.
>>
>> Thank you.
>> </form letter>
>>
>> Best regards,
>> Krzysztof
>>
> 
> Are you referring to
> 
>> diff --git a/Documentation/devicetree/bindings/net/wireless/ti,cc33xx.yaml b/Documentation/devicetree/bindings/net/wireless/ti,cc33xx.yaml
> 
> ...
> 
>> +
>> +properties:
>> +  $nodename:
>> +    pattern: "^wifi@2"
> 
> ?
> 
> If so, I replied here
> https://lore.kernel.org/linux-wireless/8024aa1c-5bd1-40d8-b0c3-14b5fcd992e2@ti.com/#t
> But if you don't think it's worthwhile I'll remove it.

I asked you to remove it. It's not correct, not needed, not beneficial
at all. It is actually harmful because limits re-use. dtc already checks
this.

Best regards,
Krzysztof