diff mbox series

[11/12] ath11k: set beacon tx mode

Message ID 20200604070952.15481-12-john@phrozen.org
State New
Headers show
Series [01/12] nl80211: add basic multiple bssid support | expand

Commit Message

John Crispin June 4, 2020, 7:09 a.m. UTC 
The beacon can be sent out in staggered or burst mode. Set this mode
according to what mac80211 tells us to use whenever the beacon changes.

Signed-off-by: John Crispin <john@phrozen.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 63099607065b..8ec11c654b3e 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -1907,6 +1907,8 @@  static void ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_BEACON) {
 		param_id = WMI_PDEV_PARAM_BEACON_TX_MODE;
 		param_value = WMI_BEACON_STAGGERED_MODE;
+		if (info->beacon_tx_mode == NL80211_BEACON_TX_MODE_BURST)
+			param_value = WMI_BEACON_BURST_MODE;
 		ret = ath11k_wmi_pdev_set_param(ar, param_id,
 						param_value, ar->pdev->pdev_id);
 		if (ret)