@@ -4078,6 +4078,8 @@ int rtw89_core_init(struct rtw89_dev *rtwdev)
rtw89_traffic_stats_init(rtwdev, &rtwdev->stats);
rtwdev->hal.rx_fltr = DEFAULT_AX_RX_FLTR;
+ rtwdev->dbcc_en = false;
+ rtwdev->mlo_dbcc_mode = MLO_DBCC_NOT_SUPPORT;
INIT_WORK(&btc->eapol_notify_work, rtw89_btc_ntfy_eapol_packet_work);
INIT_WORK(&btc->arp_notify_work, rtw89_btc_ntfy_arp_packet_work);
@@ -3226,6 +3226,20 @@ enum rtw89_dma_ch {
RTW89_DMA_CH_NUM = 13
};
+#define MLO_MODE_FOR_BB0_BB1_RF(bb0, bb1, rf) ((rf) << 12 | (bb1) << 4 | (bb0))
+
+enum rtw89_mlo_dbcc_mode {
+ MLO_DBCC_NOT_SUPPORT = 1,
+ MLO_0_PLUS_2_1RF = MLO_MODE_FOR_BB0_BB1_RF(0, 2, 1),
+ MLO_0_PLUS_2_2RF = MLO_MODE_FOR_BB0_BB1_RF(0, 2, 2),
+ MLO_1_PLUS_1_1RF = MLO_MODE_FOR_BB0_BB1_RF(1, 1, 1),
+ MLO_1_PLUS_1_2RF = MLO_MODE_FOR_BB0_BB1_RF(1, 1, 2),
+ MLO_2_PLUS_0_1RF = MLO_MODE_FOR_BB0_BB1_RF(2, 0, 1),
+ MLO_2_PLUS_0_2RF = MLO_MODE_FOR_BB0_BB1_RF(2, 0, 2),
+ MLO_2_PLUS_2_2RF = MLO_MODE_FOR_BB0_BB1_RF(2, 2, 2),
+ DBCC_LEGACY = 0xffffffff,
+};
+
enum rtw89_qta_mode {
RTW89_QTA_SCC,
RTW89_QTA_DLFW,
@@ -4821,6 +4835,7 @@ struct rtw89_dev {
const struct ieee80211_ops *ops;
bool dbcc_en;
+ enum rtw89_mlo_dbcc_mode mlo_dbcc_mode;
struct rtw89_hw_scan_info scan_info;
const struct rtw89_chip_info *chip;
const struct rtw89_pci_info *pci_info;
@@ -5817,6 +5832,18 @@ static inline void rtw89_core_tx_wait_complete(struct rtw89_dev *rtwdev,
rcu_read_unlock();
}
+static inline bool rtw89_is_mlo_1_1(struct rtw89_dev *rtwdev)
+{
+ switch (rtwdev->mlo_dbcc_mode) {
+ case MLO_1_PLUS_1_1RF:
+ case MLO_1_PLUS_1_2RF:
+ case DBCC_LEGACY:
+ return true;
+ default:
+ return false;
+ }
+}
+
int rtw89_core_tx_write(struct rtw89_dev *rtwdev, struct ieee80211_vif *vif,
struct ieee80211_sta *sta, struct sk_buff *skb, int *qsel);
int rtw89_h2c_tx(struct rtw89_dev *rtwdev,
WiFi 7 chips can operate in various MLO applications, such as 1 link (2SS) and 2 links (1SS + 1SS), and we should configure different PHY mode for each of them. For example, - MLO_2_PLUS_0_1RF is 1 link with 2SS rate, and enable one RF component. - MLO_1_PLUS_1_1RF is 2 links with 1SS rate for each, and enable one RF component that can support two paths. By default, we set the mode to legacy MLO_DBCC_NOT_SUPPORT (don't support MLO and DBCC yet), and later we will introduce logic to change the mode. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> --- drivers/net/wireless/realtek/rtw89/core.c | 2 ++ drivers/net/wireless/realtek/rtw89/core.h | 27 +++++++++++++++++++++++ 2 files changed, 29 insertions(+)