[v7,07/12] wifi: rtlwifi: Add rtl8192du/rf.{c,h}

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192du/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192du/rf.c
new file mode 100644
index 000000000000..044dd65eafd0
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192du/rf.c
@@ -0,0 +1,240 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2024  Realtek Corporation.*/
+
+#include "../wifi.h"
+#include "../rtl8192d/reg.h"
+#include "../rtl8192d/phy_common.h"
+#include "phy.h"
+#include "rf.h"
+
+bool rtl92du_phy_enable_anotherphy(struct ieee80211_hw *hw, bool bmac0)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = &rtlpriv->rtlhal;
+	u8 mac_on_bit = bmac0 ? MAC1_ON : MAC0_ON;
+	u8 mac_reg = bmac0 ? REG_MAC1 : REG_MAC0;
+	bool bresult = true; /* true: need to enable BB/RF power */
+	u32 maskforphyset = 0;
+	u16 val16;
+	u8 u1btmp;
+
+	rtlhal->during_mac0init_radiob = false;
+	rtlhal->during_mac1init_radioa = false;
+	rtl_dbg(rtlpriv, COMP_RF, DBG_LOUD, "===>\n");
+
+	/* MAC0 Need PHY1 load radio_b.txt . Driver use DBI to write. */
+	u1btmp = rtl_read_byte(rtlpriv, mac_reg);
+	if (!(u1btmp & mac_on_bit)) {
+		rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "enable BB & RF\n");
+		/* Enable BB and RF power */
+
+		maskforphyset = bmac0 ? MAC0_ACCESS_PHY1 : MAC1_ACCESS_PHY0;
+
+		val16 = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN | maskforphyset);
+		val16 &= 0xfffc;
+		rtl_write_word(rtlpriv, REG_SYS_FUNC_EN | maskforphyset, val16);
+
+		val16 = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN | maskforphyset);
+		val16 |= BIT(13) | BIT(0) | BIT(1);
+		rtl_write_word(rtlpriv, REG_SYS_FUNC_EN | maskforphyset, val16);
+	} else {
+		/* We think if MAC1 is ON,then radio_a.txt
+		 * and radio_b.txt has been load.
+		 */
+		bresult = false;
+	}
+	rtl_dbg(rtlpriv, COMP_RF, DBG_LOUD, "<===\n");
+	return bresult;
+}
+
+void rtl92du_phy_powerdown_anotherphy(struct ieee80211_hw *hw, bool bmac0)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = &rtlpriv->rtlhal;
+	u8 mac_on_bit = bmac0 ? MAC1_ON : MAC0_ON;
+	u8 mac_reg = bmac0 ? REG_MAC1 : REG_MAC0;
+	u32 maskforphyset = 0;
+	u8 u1btmp;
+
+	rtlhal->during_mac0init_radiob = false;
+	rtlhal->during_mac1init_radioa = false;
+	rtl_dbg(rtlpriv, COMP_RF, DBG_LOUD, "====>\n");
+
+	/* check MAC0 enable or not again now, if
+	 * enabled, not power down radio A.
+	 */
+	u1btmp = rtl_read_byte(rtlpriv, mac_reg);
+	if (!(u1btmp & mac_on_bit)) {
+		rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "power down\n");
+		/* power down RF radio A according to YuNan's advice. */
+		maskforphyset = bmac0 ? MAC0_ACCESS_PHY1 : MAC1_ACCESS_PHY0;
+		rtl_write_dword(rtlpriv, RFPGA0_XA_LSSIPARAMETER | maskforphyset,
+				0x00000000);
+	}
+	rtl_dbg(rtlpriv, COMP_RF, DBG_LOUD, "<====\n");
+}
+
+bool rtl92du_phy_rf6052_config(struct ieee80211_hw *hw)
+{
+	bool mac1_initradioa_first = false, mac0_initradiob_first = false;
+	bool need_pwrdown_radioa = false, need_pwrdown_radiob = false;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = &rtlpriv->rtlhal;
+	struct rtl_phy *rtlphy = &rtlpriv->phy;
+	struct bb_reg_def *pphyreg;
+	bool true_bpath = false;
+	bool rtstatus = true;
+	u32 u4_regvalue = 0;
+	u8 rfpath;
+
+	if (rtlphy->rf_type == RF_1T1R)
+		rtlphy->num_total_rfpath = 1;
+	else
+		rtlphy->num_total_rfpath = 2;
+
+	/* Single phy mode: use radio_a radio_b config path_A path_B
+	 * separately by MAC0, and MAC1 needn't configure RF;
+	 * Dual PHY mode: MAC0 use radio_a config 1st phy path_A,
+	 * MAC1 use radio_b config 2nd PHY path_A.
+	 * DMDP, MAC0 on G band, MAC1 on A band.
+	 */
+	if (rtlhal->macphymode == DUALMAC_DUALPHY) {
+		if (rtlhal->current_bandtype == BAND_ON_2_4G &&
+		    rtlhal->interfaceindex == 0) {
+			/* MAC0 needs PHY1 load radio_b.txt. */
+			if (rtl92du_phy_enable_anotherphy(hw, true)) {
+				rtlphy->num_total_rfpath = 2;
+				mac0_initradiob_first = true;
+			} else {
+				/* We think if MAC1 is ON,then radio_a.txt and
+				 * radio_b.txt has been load.
+				 */
+				return rtstatus;
+			}
+		} else if (rtlhal->current_bandtype == BAND_ON_5G &&
+			   rtlhal->interfaceindex == 1) {
+			/* MAC1 needs PHY0 load radio_a.txt. */
+			if (rtl92du_phy_enable_anotherphy(hw, false)) {
+				rtlphy->num_total_rfpath = 2;
+				mac1_initradioa_first = true;
+			} else {
+				/* We think if MAC0 is ON, then radio_a.txt and
+				 * radio_b.txt has been load.
+				 */
+				return rtstatus;
+			}
+		} else if (rtlhal->interfaceindex == 1) {
+			/* MAC0 enabled, only init radia B.   */
+			true_bpath = true;
+		}
+	}
+
+	for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {
+		/* Mac1 use PHY0 write */
+		if (mac1_initradioa_first) {
+			if (rfpath == RF90_PATH_A) {
+				rtlhal->during_mac1init_radioa = true;
+				need_pwrdown_radioa = true;
+			} else if (rfpath == RF90_PATH_B) {
+				rtlhal->during_mac1init_radioa = false;
+				mac1_initradioa_first = false;
+				rfpath = RF90_PATH_A;
+				true_bpath = true;
+				rtlphy->num_total_rfpath = 1;
+			}
+		} else if (mac0_initradiob_first) {
+			/* Mac0 use PHY1 write */
+			if (rfpath == RF90_PATH_A)
+				rtlhal->during_mac0init_radiob = false;
+			if (rfpath == RF90_PATH_B) {
+				rtlhal->during_mac0init_radiob = true;
+				mac0_initradiob_first = false;
+				need_pwrdown_radiob = true;
+				rfpath = RF90_PATH_A;
+				true_bpath = true;
+				rtlphy->num_total_rfpath = 1;
+			}
+		}
+
+		pphyreg = &rtlphy->phyreg_def[rfpath];
+
+		switch (rfpath) {
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
+						    BRFSI_RFENV);
+			break;
+		case RF90_PATH_B:
+		case RF90_PATH_D:
+			u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
+						    BRFSI_RFENV << 16);
+			break;
+		}
+
+		rtl_set_bbreg(hw, pphyreg->rfintfe, BRFSI_RFENV << 16, 0x1);
+		udelay(1);
+		rtl_set_bbreg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1);
+		udelay(1);
+
+		/* Set bit number of Address and Data for RF register */
+		rtl_set_bbreg(hw, pphyreg->rfhssi_para2,
+			      B3WIREADDRESSLENGTH, 0x0);
+		udelay(1);
+		rtl_set_bbreg(hw, pphyreg->rfhssi_para2, B3WIREDATALENGTH, 0x0);
+		udelay(1);
+
+		switch (rfpath) {
+		case RF90_PATH_A:
+			if (true_bpath)
+				rtstatus = rtl92du_phy_config_rf_with_headerfile(
+						hw, radiob_txt,
+						(enum radio_path)rfpath);
+			else
+				rtstatus = rtl92du_phy_config_rf_with_headerfile(
+						hw, radioa_txt,
+						(enum radio_path)rfpath);
+			break;
+		case RF90_PATH_B:
+			rtstatus =
+			    rtl92du_phy_config_rf_with_headerfile(hw, radiob_txt,
+						(enum radio_path)rfpath);
+			break;
+		case RF90_PATH_C:
+			break;
+		case RF90_PATH_D:
+			break;
+		}
+
+		switch (rfpath) {
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			rtl_set_bbreg(hw, pphyreg->rfintfs, BRFSI_RFENV,
+				      u4_regvalue);
+			break;
+		case RF90_PATH_B:
+		case RF90_PATH_D:
+			rtl_set_bbreg(hw, pphyreg->rfintfs, BRFSI_RFENV << 16,
+				      u4_regvalue);
+			break;
+		}
+
+		if (!rtstatus) {
+			rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE,
+				"Radio[%d] Fail!!\n", rfpath);
+			return rtstatus;
+		}
+	}
+
+	/* check MAC0 enable or not again, if enabled,
+	 * not power down radio A.
+	 * check MAC1 enable or not again, if enabled,
+	 * not power down radio B.
+	 */
+	if (need_pwrdown_radioa)
+		rtl92du_phy_powerdown_anotherphy(hw, false);
+	else if (need_pwrdown_radiob)
+		rtl92du_phy_powerdown_anotherphy(hw, true);
+	rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, "<---\n");
+
+	return rtstatus;
+}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192du/rf.h b/drivers/net/wireless/realtek/rtlwifi/rtl8192du/rf.h
new file mode 100644
index 000000000000..4a92cbdd00c0
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192du/rf.h
@@ -0,0 +1,11 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 2024  Realtek Corporation.*/
+
+#ifndef __RTL92DU_RF_H__
+#define __RTL92DU_RF_H__
+
+bool rtl92du_phy_rf6052_config(struct ieee80211_hw *hw);
+bool rtl92du_phy_enable_anotherphy(struct ieee80211_hw *hw, bool bmac0);
+void rtl92du_phy_powerdown_anotherphy(struct ieee80211_hw *hw, bool bmac0);
+
+#endif