| Message ID | 20180518211510.13341-1-ivan.khoronzhuk@linaro.org |
|---|---|
| Headers | show |
| Series | net: ethernet: ti: cpsw: add MQPRIO and CBS Qdisc offload | expand |
Hi Ivan, On 05/18/2018 04:15 PM, Ivan Khoronzhuk wrote: > This series adds MQPRIO and CBS Qdisc offload for TI cpsw driver. > It potentially can be used in audio video bridging (AVB) and time > sensitive networking (TSN). > > Patchset was tested on AM572x EVM and BBB boards. Last patch from this > series adds detailed description of configuration with examples. For > consistency reasons, in role of talker and listener, tools from > patchset "TSN: Add qdisc based config interface for CBS" were used and > can be seen here: https://www.spinics.net/lists/netdev/msg460869.html > > Based on net-next/master Thanks a lot, it is great work. In general I have no comments as of now, but I prefer to wait a bit (few weeks) for more comments and possible test reports. If no comments, pls feel free to repost as final series. > > Ivan Khoronzhuk (6): > net: ethernet: ti: cpsw: use cpdma channels in backward order for txq > net: ethernet: ti: cpdma: fit rated channels in backward order > net: ethernet: ti: cpsw: add MQPRIO Qdisc offload > net: ethernet: ti: cpsw: add CBS Qdisc offload > net: ethernet: ti: cpsw: restore shaper configuration while down/up > Documentation: networking: cpsw: add MQPRIO & CBS offload examples > > Documentation/networking/cpsw.txt | 540 ++++++++++++++++++++++++ > drivers/net/ethernet/ti/cpsw.c | 364 +++++++++++++++- > drivers/net/ethernet/ti/davinci_cpdma.c | 31 +- > 3 files changed, 913 insertions(+), 22 deletions(-) > create mode 100644 Documentation/networking/cpsw.txt > -- regards, -grygorii
Hi Ivan, Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> writes: > This series adds MQPRIO and CBS Qdisc offload for TI cpsw driver. > It potentially can be used in audio video bridging (AVB) and time > sensitive networking (TSN). > > Patchset was tested on AM572x EVM and BBB boards. Last patch from this > series adds detailed description of configuration with examples. For > consistency reasons, in role of talker and listener, tools from > patchset "TSN: Add qdisc based config interface for CBS" were used and > can be seen here: https://www.spinics.net/lists/netdev/msg460869.html > > Based on net-next/master > I didn't test this, but it looks fine from my side. I agree with Grygorii, that if no comments, this should be re-sent as a patch series next. > Ivan Khoronzhuk (6): > net: ethernet: ti: cpsw: use cpdma channels in backward order for txq > net: ethernet: ti: cpdma: fit rated channels in backward order > net: ethernet: ti: cpsw: add MQPRIO Qdisc offload > net: ethernet: ti: cpsw: add CBS Qdisc offload > net: ethernet: ti: cpsw: restore shaper configuration while down/up > Documentation: networking: cpsw: add MQPRIO & CBS offload examples > > Documentation/networking/cpsw.txt | 540 ++++++++++++++++++++++++ > drivers/net/ethernet/ti/cpsw.c | 364 +++++++++++++++- > drivers/net/ethernet/ti/davinci_cpdma.c | 31 +- > 3 files changed, 913 insertions(+), 22 deletions(-) > create mode 100644 Documentation/networking/cpsw.txt > > -- > 2.17.0 Cheers, -- Vinicius