mbox series

[net-next,0/7] Adds support of RAS Error Handling in HNS3 Driver

Message ID 20181019191532.10088-1-salil.mehta@huawei.com
Headers show
Series Adds support of RAS Error Handling in HNS3 Driver | expand

Message

Salil Mehta Oct. 19, 2018, 7:15 p.m. UTC 
This patch-set adds support related to RAS Error handling to the HNS3
Ethernet PF Driver. Set of errors occurred in the HNS3 hardware are
reported to the driver through the PCIe AER interface. The received
error information is then used to classify the received errors and
then decide the appropriate receovery action depending on the type
of error.


Shiju Jose (7):
  net: hns3: Add PCIe AER callback error_detected
  net: hns3: Add PCIe AER error recovery
  net: hns3: Add support to enable and disable hw errors
  net: hns3: Add enable and process common ecc errors
  net: hns3: Add enable and process hw errors from IGU, EGU and NCSI
  net: hns3: Add enable and process hw errors from PPP
  net: hns3: Add enable and process hw errors of TM scheduler

 drivers/net/ethernet/hisilicon/hns3/hnae3.h        |    3 +-
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c    |   50 +-
 .../net/ethernet/hisilicon/hns3/hns3pf/Makefile    |    2 +-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h |   22 +
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c | 1088 ++++++++++++++++++++
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h |   83 ++
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    |   33 +-
 .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c  |    3 +-
 8 files changed, 1276 insertions(+), 8 deletions(-)
 create mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c
 create mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h

-- 
2.7.4

Comments

David Miller Oct. 23, 2018, 2:32 a.m. UTC | #1 
From: Salil Mehta <salil.mehta@huawei.com>

Date: Fri, 19 Oct 2018 20:15:25 +0100

> This patch-set adds support related to RAS Error handling to the HNS3

> Ethernet PF Driver. Set of errors occurred in the HNS3 hardware are

> reported to the driver through the PCIe AER interface. The received

> error information is then used to classify the received errors and

> then decide the appropriate receovery action depending on the type

> of error.


Series applied.