From patchwork Sun Jun 5 16:07:55 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Shawn Guo X-Patchwork-Id: 1749 Return-Path: Delivered-To: unknown Received: from imap.gmail.com (74.125.159.109) by localhost6.localdomain6 with IMAP4-SSL; 08 Jun 2011 14:55:20 -0000 Delivered-To: patches@linaro.org Received: by 10.52.181.10 with SMTP id ds10cs99174vdc; Sun, 5 Jun 2011 08:59:57 -0700 (PDT) Received: by 10.42.168.199 with SMTP id x7mr7159154icy.40.1307289595918; Sun, 05 Jun 2011 08:59:55 -0700 (PDT) Received: from mail-pw0-f50.google.com (mail-pw0-f50.google.com [209.85.160.50]) by mx.google.com with ESMTPS id i6si23434042icv.133.2011.06.05.08.59.55 (version=TLSv1/SSLv3 cipher=OTHER); Sun, 05 Jun 2011 08:59:55 -0700 (PDT) Received-SPF: neutral (google.com: 209.85.160.50 is neither permitted nor denied by best guess record for domain of shawn.guo@linaro.org) client-ip=209.85.160.50; Authentication-Results: mx.google.com; spf=neutral (google.com: 209.85.160.50 is neither permitted nor denied by best guess record for domain of shawn.guo@linaro.org) smtp.mail=shawn.guo@linaro.org Received: by pwi3 with SMTP id 3so1956283pwi.37 for ; Sun, 05 Jun 2011 08:59:55 -0700 (PDT) Received: by 10.68.22.130 with SMTP id d2mr1592091pbf.248.1307289594289; Sun, 05 Jun 2011 08:59:54 -0700 (PDT) Received: from localhost.localdomain ([117.80.114.155]) by mx.google.com with ESMTPS id b8sm3013091pbj.94.2011.06.05.08.59.40 (version=TLSv1/SSLv3 cipher=OTHER); Sun, 05 Jun 2011 08:59:53 -0700 (PDT) From: Shawn Guo To: linux-kernel@vger.kernel.org Cc: grant.likely@secretlab.ca, arnd@arndb.de, olof@lixom.net, kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org, patches@linaro.org, Shawn Guo Subject: [PATCH v4 2/2] gpio/mxc: Change gpio-mxc into an upstanding gpio driver Date: Mon, 6 Jun 2011 00:07:55 +0800 Message-Id: <1307290075-7062-3-git-send-email-shawn.guo@linaro.org> X-Mailer: git-send-email 1.7.4.1 In-Reply-To: <1307290075-7062-1-git-send-email-shawn.guo@linaro.org> References: <1307290075-7062-1-git-send-email-shawn.guo@linaro.org> The patch makes necessary changes on gpio-mxc as below to turn it into an upstanding gpio driver. * Add a list to save all mx2 ports references, so that mx2_gpio_irq_handler can walk through all interrupt status registers * Use readl/writel to replace mach-specific accessors __raw_readl/__raw_writel * Change mxc_gpio_init into mxc_gpio_probe function * Move "struct mxc_gpio_port" into gpio-mxc.c, as it needs not to be public at all, and also make some other cleanup on plat-mxc/include/mach/gpio.h at the same time And the patch then migrates mach-imx and mach-mx5 to the updated driver by adding corresponding platform devices. Signed-off-by: Shawn Guo Acked-by: Olof Johansson --- arch/arm/mach-imx/mach-apf9328.c | 2 + arch/arm/mach-imx/mach-armadillo5x0.c | 2 + arch/arm/mach-imx/mach-bug.c | 2 + arch/arm/mach-imx/mach-cpuimx27.c | 2 + arch/arm/mach-imx/mach-cpuimx35.c | 2 + arch/arm/mach-imx/mach-eukrea_cpuimx25.c | 2 + arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 2 + arch/arm/mach-imx/mach-imx27ipcam.c | 2 + arch/arm/mach-imx/mach-imx27lite.c | 2 + arch/arm/mach-imx/mach-kzm_arm11_01.c | 2 + arch/arm/mach-imx/mach-mx1ads.c | 2 + arch/arm/mach-imx/mach-mx21ads.c | 2 + arch/arm/mach-imx/mach-mx25_3ds.c | 2 + arch/arm/mach-imx/mach-mx27_3ds.c | 2 + arch/arm/mach-imx/mach-mx27ads.c | 2 + arch/arm/mach-imx/mach-mx31_3ds.c | 2 + arch/arm/mach-imx/mach-mx31ads.c | 2 + arch/arm/mach-imx/mach-mx31lilly.c | 2 + arch/arm/mach-imx/mach-mx31lite.c | 2 + arch/arm/mach-imx/mach-mx31moboard.c | 2 + arch/arm/mach-imx/mach-mx35_3ds.c | 2 + arch/arm/mach-imx/mach-mxt_td60.c | 2 + arch/arm/mach-imx/mach-pca100.c | 2 + arch/arm/mach-imx/mach-pcm037.c | 2 + arch/arm/mach-imx/mach-pcm038.c | 2 + arch/arm/mach-imx/mach-pcm043.c | 2 + arch/arm/mach-imx/mach-qong.c | 2 + arch/arm/mach-imx/mach-scb9328.c | 2 + arch/arm/mach-imx/mach-vpr200.c | 2 + arch/arm/mach-imx/mm-imx1.c | 17 +- arch/arm/mach-imx/mm-imx21.c | 21 +-- arch/arm/mach-imx/mm-imx25.c | 16 +- arch/arm/mach-imx/mm-imx27.c | 21 +-- arch/arm/mach-imx/mm-imx31.c | 15 +- arch/arm/mach-imx/mm-imx35.c | 15 +- arch/arm/mach-mx5/board-cpuimx51.c | 2 + arch/arm/mach-mx5/board-cpuimx51sd.c | 2 + arch/arm/mach-mx5/board-mx50_rdp.c | 2 + arch/arm/mach-mx5/board-mx51_3ds.c | 2 + arch/arm/mach-mx5/board-mx51_babbage.c | 2 + arch/arm/mach-mx5/board-mx51_efikamx.c | 2 + arch/arm/mach-mx5/board-mx51_efikasb.c | 2 + arch/arm/mach-mx5/board-mx53_evk.c | 2 + arch/arm/mach-mx5/board-mx53_loco.c | 2 + arch/arm/mach-mx5/board-mx53_smd.c | 2 + arch/arm/mach-mx5/devices.c | 64 ------- arch/arm/mach-mx5/mm-mx50.c | 21 +-- arch/arm/mach-mx5/mm.c | 25 ++- arch/arm/plat-mxc/devices.c | 11 ++ arch/arm/plat-mxc/devices/Makefile | 1 + arch/arm/plat-mxc/devices/platform-gpio-mxc.c | 32 ++++ arch/arm/plat-mxc/include/mach/common.h | 12 ++- arch/arm/plat-mxc/include/mach/devices-common.h | 2 + arch/arm/plat-mxc/include/mach/gpio.h | 27 --- drivers/gpio/gpio-mxc.c | 217 +++++++++++++++-------- 55 files changed, 358 insertions(+), 237 deletions(-) create mode 100644 arch/arm/plat-mxc/devices/platform-gpio-mxc.c diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index 15e45c8..59d2a3b 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -115,6 +115,8 @@ static struct platform_device *devices[] __initdata = { static void __init apf9328_init(void) { + imx1_soc_init(); + mxc_gpio_setup_multiple_pins(apf9328_pins, ARRAY_SIZE(apf9328_pins), "APF9328"); diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index ffb40ff..ede2710 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -490,6 +490,8 @@ static struct platform_device *devices[] __initdata = { */ static void __init armadillo5x0_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(armadillo5x0_pins, ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c index 42e4f07..f494705 100644 --- a/arch/arm/mach-imx/mach-bug.c +++ b/arch/arm/mach-imx/mach-bug.c @@ -42,6 +42,8 @@ static const unsigned int bug_pins[] __initconst = { static void __init bug_board_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(bug_pins, ARRAY_SIZE(bug_pins), "uart-4"); imx31_add_imx_uart4(&uart_pdata); diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 46a2e41..87887ac 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -250,6 +250,8 @@ __setup("otg_mode=", eukrea_cpuimx27_otg_mode); static void __init eukrea_cpuimx27_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins, ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27"); diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 3f8ef82..f39a478b 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -156,6 +156,8 @@ __setup("otg_mode=", eukrea_cpuimx35_otg_mode); */ static void __init eukrea_cpuimx35_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads, ARRAY_SIZE(eukrea_cpuimx35_pads)); diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index 148cff2..da36da5 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -125,6 +125,8 @@ __setup("otg_mode=", eukrea_cpuimx25_otg_mode); static void __init eukrea_cpuimx25_init(void) { + imx25_soc_init(); + if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads, ARRAY_SIZE(eukrea_cpuimx25_pads))) printk(KERN_ERR "error setting cpuimx25 pads !\n"); diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 7ae43b1..c6269d6 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -231,6 +231,8 @@ static void __init visstrim_m10_board_init(void) { int ret; + imx27_soc_init(); + ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins, ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10"); if (ret) diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index 9be6cd6..272f793 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -50,6 +50,8 @@ static const int mx27ipcam_pins[] __initconst = { static void __init mx27ipcam_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins), "mx27ipcam"); diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index 8411405..d81a769 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -59,6 +59,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mx27lite_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins), "imx27lite"); imx27_add_imx_uart0(&uart_pdata); diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 1ecae20..e472a1d 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -223,6 +223,8 @@ static int kzm_pins[] __initdata = { */ static void __init kzm_board_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(kzm_pins, ARRAY_SIZE(kzm_pins), "kzm"); kzm_init_ext_uart(); diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 38ec5cb..5cd8bee 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -115,6 +115,8 @@ static struct i2c_board_info mx1ads_i2c_devices[] = { */ static void __init mx1ads_init(void) { + imx1_soc_init(); + mxc_gpio_setup_multiple_pins(mx1ads_pins, ARRAY_SIZE(mx1ads_pins), "mx1ads"); diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 74ac889..d389ecf 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -279,6 +279,8 @@ static struct platform_device *platform_devices[] __initdata = { static void __init mx21ads_board_init(void) { + imx21_soc_init(); + mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins), "mx21ads"); diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index 58ea3fd..01534bb 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -219,6 +219,8 @@ static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = { static void __init mx25pdk_init(void) { + imx25_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, ARRAY_SIZE(mx25pdk_pads)); diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 6e1accf..117ce0a 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -267,6 +267,8 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = { static void __init mx27pdk_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), "mx27pdk"); mx27_3ds_sdhc1_enable_level_translator(); diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 1db7950..fc26ed7 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -288,6 +288,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mx27ads_board_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins), "mx27ads"); diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 9b98244..ab2a626 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -689,6 +689,8 @@ static void __init mx31_3ds_init(void) { int ret; + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), "mx31_3ds"); diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index f4dee02..0ce4947 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -516,6 +516,8 @@ static void __init mx31ads_init_irq(void) static void __init mx31ads_init(void) { + imx31_soc_init(); + mxc_init_extuart(); mxc_init_imx_uart(); mxc_init_i2c(); diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 410e676..750368d 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -243,6 +243,8 @@ core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); static void __init mx31lilly_board_init(void) { + imx31_soc_init(); + switch (mx31lilly_baseboard) { case MX31LILLY_NOBOARD: break; diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index ac9b4ca..4b47fd9 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -230,6 +230,8 @@ static void __init mx31lite_init(void) { int ret; + imx31_soc_init(); + switch (mx31lite_baseboard) { case MX31LITE_NOBOARD: break; diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index eaa51e4..a52fd36 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -507,6 +507,8 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); */ static void __init mx31moboard_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins), "moboard"); diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 882880a..48b3c6f 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -179,6 +179,8 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = { */ static void __init mx35_3ds_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); imx35_add_fec(NULL); diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index 2774541..c85876f 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -233,6 +233,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mxt_td60_board_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins), "MXT_TD60"); diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index bbddc5a..71083aa 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -357,6 +357,8 @@ static void __init pca100_init(void) { int ret; + imx27_soc_init(); + /* SSI unit */ mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */ diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 89c213b..f45b7cd 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -576,6 +576,8 @@ static void __init pcm037_init(void) { int ret; + imx31_soc_init(); + mxc_iomux_set_gpr(MUX_PGP_UH2, 1); mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 853bb87..2d6a64b 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -295,6 +295,8 @@ static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { static void __init pcm038_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), "PCM038"); diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 0264416..163cc31 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -356,6 +356,8 @@ static struct esdhc_platform_data sd1_pdata = { */ static void __init pcm043_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); mxc_audmux_v2_configure_port(3, diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index c163287..3626f48 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -244,6 +244,8 @@ static void __init qong_init_fpga(void) */ static void __init qong_init(void) { + imx31_soc_init(); + mxc_init_imx_uart(); qong_init_nor_mtd(); qong_init_fpga(); diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index dcaee04..8280526 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -129,6 +129,8 @@ static struct platform_device *devices[] __initdata = { */ static void __init scb9328_init(void) { + imx1_soc_init(); + imx1_add_imx_uart0(&uart_pdata); printk(KERN_INFO"Scb9328: Adding devices\n"); diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index d74e347..7d8e012 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -267,6 +267,8 @@ static struct platform_device *devices[] __initdata = { */ static void __init vpr200_board_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads)); imx35_add_fec(NULL); diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index 2e482ba..b486595 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -23,7 +23,6 @@ #include #include -#include #include #include @@ -44,15 +43,15 @@ void __init imx1_init_early(void) MX1_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx1_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD), -}; - void __init mx1_init_irq(void) { mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR)); - mxc_gpio_init(imx1_gpio_ports, ARRAY_SIZE(imx1_gpio_ports)); +} + +void __init imx1_soc_init(void) +{ + mxc_register_gpio(0, MX1_GPIO1_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTA, 0); + mxc_register_gpio(1, MX1_GPIO2_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTB, 0); + mxc_register_gpio(2, MX1_GPIO3_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTC, 0); + mxc_register_gpio(3, MX1_GPIO4_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTD, 0); } diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 7a0c500..f0fb8bc 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include @@ -70,17 +69,17 @@ void __init imx21_init_early(void) MX21_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx21_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO), - DEFINE_IMX_GPIO_PORT(MX21, 1, 2), - DEFINE_IMX_GPIO_PORT(MX21, 2, 3), - DEFINE_IMX_GPIO_PORT(MX21, 3, 4), - DEFINE_IMX_GPIO_PORT(MX21, 4, 5), - DEFINE_IMX_GPIO_PORT(MX21, 5, 6), -}; - void __init mx21_init_irq(void) { mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR)); - mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports)); +} + +void __init imx21_soc_init(void) +{ + mxc_register_gpio(0, MX21_GPIO1_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0); + mxc_register_gpio(1, MX21_GPIO2_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0); + mxc_register_gpio(2, MX21_GPIO3_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0); + mxc_register_gpio(3, MX21_GPIO4_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0); + mxc_register_gpio(4, MX21_GPIO5_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0); + mxc_register_gpio(5, MX21_GPIO6_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0); } diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 02f7b5c..1b6d583 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -27,7 +27,6 @@ #include #include #include -#include #include /* @@ -57,16 +56,15 @@ void __init imx25_init_early(void) mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx25_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4), -}; - void __init mx25_init_irq(void) { mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR)); - mxc_gpio_init(imx25_gpio_ports, ARRAY_SIZE(imx25_gpio_ports)); } +void __init imx25_soc_init(void) +{ + mxc_register_gpio(0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0); + mxc_register_gpio(1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); + mxc_register_gpio(2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); + mxc_register_gpio(3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); +} diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index a6761a3..d3700ce 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include @@ -70,17 +69,17 @@ void __init imx27_init_early(void) MX27_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx27_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO), - DEFINE_IMX_GPIO_PORT(MX27, 1, 2), - DEFINE_IMX_GPIO_PORT(MX27, 2, 3), - DEFINE_IMX_GPIO_PORT(MX27, 3, 4), - DEFINE_IMX_GPIO_PORT(MX27, 4, 5), - DEFINE_IMX_GPIO_PORT(MX27, 5, 6), -}; - void __init mx27_init_irq(void) { mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR)); - mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports)); +} + +void __init imx27_soc_init(void) +{ + mxc_register_gpio(0, MX27_GPIO1_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0); + mxc_register_gpio(1, MX27_GPIO2_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0); + mxc_register_gpio(2, MX27_GPIO3_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0); + mxc_register_gpio(3, MX27_GPIO4_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0); + mxc_register_gpio(4, MX27_GPIO5_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0); + mxc_register_gpio(5, MX27_GPIO6_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0); } diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c index 86b9b45..cb16ac6 100644 --- a/arch/arm/mach-imx/mm-imx31.c +++ b/arch/arm/mach-imx/mm-imx31.c @@ -26,7 +26,6 @@ #include #include #include -#include #include static struct map_desc mx31_io_desc[] __initdata = { @@ -53,14 +52,14 @@ void __init imx31_init_early(void) mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx31_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3), -}; - void __init mx31_init_irq(void) { mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); - mxc_gpio_init(imx31_gpio_ports, ARRAY_SIZE(imx31_gpio_ports)); +} + +void __init imx31_soc_init(void) +{ + mxc_register_gpio(0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); + mxc_register_gpio(1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); + mxc_register_gpio(2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); } diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c index c880e6d..648bfca 100644 --- a/arch/arm/mach-imx/mm-imx35.c +++ b/arch/arm/mach-imx/mm-imx35.c @@ -27,7 +27,6 @@ #include #include #include -#include #include static struct map_desc mx35_io_desc[] __initdata = { @@ -50,14 +49,14 @@ void __init imx35_init_early(void) mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx35_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3), -}; - void __init mx35_init_irq(void) { mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); - mxc_gpio_init(imx35_gpio_ports, ARRAY_SIZE(imx35_gpio_ports)); +} + +void __init imx35_soc_init(void) +{ + mxc_register_gpio(0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); + mxc_register_gpio(1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); + mxc_register_gpio(2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); } diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 4efa02e..add0d42 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -245,6 +245,8 @@ __setup("otg_mode=", eukrea_cpuimx51_otg_mode); */ static void __init eukrea_cpuimx51_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads, ARRAY_SIZE(eukrea_cpuimx51_pads)); diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index 5ef25a5..ff096d5 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -264,6 +264,8 @@ static struct platform_device *platform_devices[] __initdata = { static void __init eukrea_cpuimx51sd_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads, ARRAY_SIZE(eukrea_cpuimx51sd_pads)); diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c index 11210e1..7de25c6 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-mx5/board-mx50_rdp.c @@ -192,6 +192,8 @@ static const struct imxi2c_platform_data i2c_data __initconst = { */ static void __init mx50_rdp_board_init(void) { + imx50_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads, ARRAY_SIZE(mx50_rdp_pads)); diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index 63dfbea..3112d15 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -135,6 +135,8 @@ static struct spi_board_info mx51_3ds_spi_nor_device[] = { */ static void __init mx51_3ds_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads, ARRAY_SIZE(mx51_3ds_pads)); diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index c7b3fab..6021dd0 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -340,6 +340,8 @@ static void __init mx51_babbage_init(void) iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 | MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP); + imx51_soc_init(); + #if defined(CONFIG_CPU_FREQ_IMX) get_cpu_op = mx51_get_cpu_op; #endif diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index 6e36231..3be603b 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -236,6 +236,8 @@ late_initcall(mx51_efikamx_power_init); static void __init mx51_efikamx_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, ARRAY_SIZE(mx51efikamx_pads)); efika_board_common_init(); diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c index 474fc6e..4b2e522 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-mx5/board-mx51_efikasb.c @@ -248,6 +248,8 @@ static void __init mx51_efikasb_board_id(void) static void __init efikasb_board_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads, ARRAY_SIZE(mx51efikasb_pads)); efika_board_common_init(); diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index f87d571..0d9218a 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -117,6 +117,8 @@ static const struct spi_imx_master mx53_evk_spi_data __initconst = { static void __init mx53_evk_board_init(void) { + imx53_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads, ARRAY_SIZE(mx53_evk_pads)); mx53_evk_init_uart(); diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 1b947e8..359c3e2 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -227,6 +227,8 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = { static void __init mx53_loco_board_init(void) { + imx53_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads, ARRAY_SIZE(mx53_loco_pads)); imx53_add_imx_uart(0, NULL); diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index 817c089..bc02894 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -113,6 +113,8 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = { static void __init mx53_smd_board_init(void) { + imx53_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads, ARRAY_SIZE(mx53_smd_pads)); mx53_smd_init_uart(); diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c index 153ada5..371ca8c 100644 --- a/arch/arm/mach-mx5/devices.c +++ b/arch/arm/mach-mx5/devices.c @@ -12,7 +12,6 @@ #include #include -#include #include #include #include @@ -119,66 +118,3 @@ struct platform_device mxc_usbh2_device = { .coherent_dma_mask = DMA_BIT_MASK(32), }, }; - -static struct mxc_gpio_port mxc_gpio_ports[] = { - { - .chip.label = "gpio-0", - .base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO1_LOW, - .irq_high = MX51_MXC_INT_GPIO1_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START - }, - { - .chip.label = "gpio-1", - .base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO2_LOW, - .irq_high = MX51_MXC_INT_GPIO2_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1 - }, - { - .chip.label = "gpio-2", - .base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO3_LOW, - .irq_high = MX51_MXC_INT_GPIO3_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2 - }, - { - .chip.label = "gpio-3", - .base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO4_LOW, - .irq_high = MX51_MXC_INT_GPIO4_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3 - }, - { - .chip.label = "gpio-4", - .base = MX53_IO_ADDRESS(MX53_GPIO5_BASE_ADDR), - .irq = MX53_INT_GPIO5_LOW, - .irq_high = MX53_INT_GPIO5_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 4 - }, - { - .chip.label = "gpio-5", - .base = MX53_IO_ADDRESS(MX53_GPIO6_BASE_ADDR), - .irq = MX53_INT_GPIO6_LOW, - .irq_high = MX53_INT_GPIO6_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 5 - }, - { - .chip.label = "gpio-6", - .base = MX53_IO_ADDRESS(MX53_GPIO7_BASE_ADDR), - .irq = MX53_INT_GPIO7_LOW, - .irq_high = MX53_INT_GPIO7_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 6 - }, -}; - -int __init imx51_register_gpios(void) -{ - return mxc_gpio_init(mxc_gpio_ports, 4); -} - -int __init imx53_register_gpios(void) -{ - return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports)); -} - diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c index b9c363b..28c3f60 100644 --- a/arch/arm/mach-mx5/mm-mx50.c +++ b/arch/arm/mach-mx5/mm-mx50.c @@ -26,7 +26,6 @@ #include #include #include -#include #include /* @@ -56,17 +55,17 @@ void __init imx50_init_early(void) mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx50_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), -}; - void __init mx50_init_irq(void) { tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR)); - mxc_gpio_init(imx50_gpio_ports, ARRAY_SIZE(imx50_gpio_ports)); +} + +void __init imx50_soc_init(void) +{ + mxc_register_gpio(0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH); + mxc_register_gpio(1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH); + mxc_register_gpio(2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH); + mxc_register_gpio(3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH); + mxc_register_gpio(4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH); + mxc_register_gpio(5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH); } diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index ff55730..800bb8b2 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -69,8 +69,6 @@ void __init imx53_init_early(void) mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR)); } -int imx51_register_gpios(void); - void __init mx51_init_irq(void) { unsigned long tzic_addr; @@ -86,11 +84,8 @@ void __init mx51_init_irq(void) panic("unable to map TZIC interrupt controller\n"); tzic_init_irq(tzic_virt); - imx51_register_gpios(); } -int imx53_register_gpios(void); - void __init mx53_init_irq(void) { unsigned long tzic_addr; @@ -103,5 +98,23 @@ void __init mx53_init_irq(void) panic("unable to map TZIC interrupt controller\n"); tzic_init_irq(tzic_virt); - imx53_register_gpios(); +} + +void __init imx51_soc_init(void) +{ + mxc_register_gpio(0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH); + mxc_register_gpio(1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH); + mxc_register_gpio(2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH); + mxc_register_gpio(3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH); +} + +void __init imx53_soc_init(void) +{ + mxc_register_gpio(0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH); + mxc_register_gpio(1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH); + mxc_register_gpio(2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH); + mxc_register_gpio(3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH); + mxc_register_gpio(4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH); + mxc_register_gpio(5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); + mxc_register_gpio(6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); } diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c index eee1b60..fb166b2 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/plat-mxc/devices.c @@ -89,3 +89,14 @@ err: return pdev; } + +struct device mxc_aips_bus = { + .init_name = "mxc_aips", + .parent = &platform_bus, +}; + +static int __init mxc_device_init(void) +{ + return device_register(&mxc_aips_bus); +} +core_initcall(mxc_device_init); diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile index ad2922a..b41bf97 100644 --- a/arch/arm/plat-mxc/devices/Makefile +++ b/arch/arm/plat-mxc/devices/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o +obj-y += platform-gpio-mxc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o diff --git a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c new file mode 100644 index 0000000..cf1b7fd --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c @@ -0,0 +1,32 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2011 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include + +struct platform_device *__init mxc_register_gpio(int id, + resource_size_t iobase, resource_size_t iosize, int irq, int irq_high) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, { + .start = irq_high, + .end = irq_high, + .flags = IORESOURCE_IRQ, + }, + }; + + return platform_device_register_resndata(&mxc_aips_bus, + "gpio-mxc", id, res, ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index da79918..91fa263 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -43,6 +43,15 @@ extern void mx35_init_irq(void); extern void mx50_init_irq(void); extern void mx51_init_irq(void); extern void mx53_init_irq(void); +extern void imx1_soc_init(void); +extern void imx21_soc_init(void); +extern void imx25_soc_init(void); +extern void imx27_soc_init(void); +extern void imx31_soc_init(void); +extern void imx35_soc_init(void); +extern void imx50_soc_init(void); +extern void imx51_soc_init(void); +extern void imx53_soc_init(void); extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); @@ -55,7 +64,8 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); -extern int mxc_register_gpios(void); +extern struct platform_device *mxc_register_gpio(int id, + resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); extern int mxc_register_device(struct platform_device *pdev, void *data); extern void mxc_set_cpu_type(unsigned int type); extern void mxc_arch_reset_init(void __iomem *); diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index fa84773..03f6266 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -10,6 +10,8 @@ #include #include +extern struct device mxc_aips_bus; + struct platform_device *imx_add_platform_device_dmamask( const char *name, int id, const struct resource *res, unsigned int num_resources, diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h index a2747f1..31c820c 100644 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ b/arch/arm/plat-mxc/include/mach/gpio.h @@ -36,31 +36,4 @@ #define gpio_to_irq(gpio) (MXC_GPIO_IRQ_START + (gpio)) #define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START) -struct mxc_gpio_port { - void __iomem *base; - int irq; - int irq_high; - int virtual_irq_start; - struct gpio_chip chip; - u32 both_edges; - spinlock_t lock; -}; - -#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high) \ - { \ - .chip.label = "gpio-" #_id, \ - .irq = _irq, \ - .irq_high = _irq_high, \ - .base = soc ## _IO_ADDRESS( \ - soc ## _GPIO ## _hwid ## _BASE_ADDR), \ - .virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32, \ - } - -#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq) \ - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0) -#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid) \ - DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0) - -int mxc_gpio_init(struct mxc_gpio_port*, int); - #endif diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c index 6cd6d7f..844079a 100644 --- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -24,11 +24,28 @@ #include #include #include +#include +#include #include #include -static struct mxc_gpio_port *mxc_gpio_ports; -static int gpio_table_size; +struct mxc_gpio_port { + struct list_head node; + void __iomem *base; + int irq; + int irq_high; + int virtual_irq_start; + struct gpio_chip chip; + u32 both_edges; + spinlock_t lock; +}; + +/* + * MX2 has one interrupt *for all* gpio ports. The list is used + * to save the references to all ports, so that mx2_gpio_irq_handler + * can walk through all interrupt status registers. + */ +static LIST_HEAD(mxc_gpio_ports); #define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2()) @@ -50,7 +67,7 @@ static int gpio_table_size; static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index) { - __raw_writel(1 << index, port->base + GPIO_ISR); + writel(1 << index, port->base + GPIO_ISR); } static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index, @@ -58,27 +75,30 @@ static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index, { u32 l; - l = __raw_readl(port->base + GPIO_IMR); + l = readl(port->base + GPIO_IMR); l = (l & (~(1 << index))) | (!!enable << index); - __raw_writel(l, port->base + GPIO_IMR); + writel(l, port->base + GPIO_IMR); } static void gpio_ack_irq(struct irq_data *d) { + struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d); u32 gpio = irq_to_gpio(d->irq); - _clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f); + _clear_gpio_irqstatus(port, gpio & 0x1f); } static void gpio_mask_irq(struct irq_data *d) { + struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d); u32 gpio = irq_to_gpio(d->irq); - _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0); + _set_gpio_irqenable(port, gpio & 0x1f, 0); } static void gpio_unmask_irq(struct irq_data *d) { + struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d); u32 gpio = irq_to_gpio(d->irq); - _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1); + _set_gpio_irqenable(port, gpio & 0x1f, 1); } static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset); @@ -86,7 +106,7 @@ static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset); static int gpio_set_irq_type(struct irq_data *d, u32 type) { u32 gpio = irq_to_gpio(d->irq); - struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; + struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d); u32 bit, val; int edge; void __iomem *reg = port->base; @@ -122,8 +142,8 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type) reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ bit = gpio & 0xf; - val = __raw_readl(reg) & ~(0x3 << (bit << 1)); - __raw_writel(val | (edge << (bit << 1)), reg); + val = readl(reg) & ~(0x3 << (bit << 1)); + writel(val | (edge << (bit << 1)), reg); _clear_gpio_irqstatus(port, gpio & 0x1f); return 0; @@ -137,7 +157,7 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ bit = gpio & 0xf; - val = __raw_readl(reg); + val = readl(reg); edge = (val >> (bit << 1)) & 3; val &= ~(0x3 << (bit << 1)); if (edge == GPIO_INT_HIGH_LEV) { @@ -151,7 +171,7 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) gpio, edge); return; } - __raw_writel(val | (edge << (bit << 1)), reg); + writel(val | (edge << (bit << 1)), reg); } /* handle 32 interrupts in one status register */ @@ -177,8 +197,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) u32 irq_stat; struct mxc_gpio_port *port = irq_get_handler_data(irq); - irq_stat = __raw_readl(port->base + GPIO_ISR) & - __raw_readl(port->base + GPIO_IMR); + irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR); mxc_gpio_irq_handler(port, irq_stat); } @@ -186,19 +205,18 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) /* MX2 has one interrupt *for all* gpio ports */ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) { - int i; u32 irq_msk, irq_stat; - struct mxc_gpio_port *port = irq_get_handler_data(irq); + struct mxc_gpio_port *port; /* walk through all interrupt status registers */ - for (i = 0; i < gpio_table_size; i++) { - irq_msk = __raw_readl(port[i].base + GPIO_IMR); + list_for_each_entry(port, &mxc_gpio_ports, node) { + irq_msk = readl(port->base + GPIO_IMR); if (!irq_msk) continue; - irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk; + irq_stat = readl(port->base + GPIO_ISR) & irq_msk; if (irq_stat) - mxc_gpio_irq_handler(&port[i], irq_stat); + mxc_gpio_irq_handler(port, irq_stat); } } @@ -215,7 +233,7 @@ static int gpio_set_wake_irq(struct irq_data *d, u32 enable) { u32 gpio = irq_to_gpio(d->irq); u32 gpio_idx = gpio & 0x1F; - struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; + struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d); if (enable) { if (port->irq_high && (gpio_idx >= 16)) @@ -250,12 +268,12 @@ static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, unsigned long flags; spin_lock_irqsave(&port->lock, flags); - l = __raw_readl(port->base + GPIO_GDIR); + l = readl(port->base + GPIO_GDIR); if (dir) l |= 1 << offset; else l &= ~(1 << offset); - __raw_writel(l, port->base + GPIO_GDIR); + writel(l, port->base + GPIO_GDIR); spin_unlock_irqrestore(&port->lock, flags); } @@ -268,8 +286,8 @@ static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) unsigned long flags; spin_lock_irqsave(&port->lock, flags); - l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset); - __raw_writel(l, reg); + l = (readl(reg) & (~(1 << offset))) | (!!value << offset); + writel(l, reg); spin_unlock_irqrestore(&port->lock, flags); } @@ -278,7 +296,7 @@ static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset) struct mxc_gpio_port *port = container_of(chip, struct mxc_gpio_port, chip); - return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1; + return (readl(port->base + GPIO_PSR) >> offset) & 1; } static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset) @@ -301,61 +319,116 @@ static int mxc_gpio_direction_output(struct gpio_chip *chip, */ static struct lock_class_key gpio_lock_class; -int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) +static int __devinit mxc_gpio_probe(struct platform_device *pdev) { - int i, j; - - /* save for local usage */ - mxc_gpio_ports = port; - gpio_table_size = cnt; - - printk(KERN_INFO "MXC GPIO hardware\n"); - - for (i = 0; i < cnt; i++) { - /* disable the interrupt and clear the status */ - __raw_writel(0, port[i].base + GPIO_IMR); - __raw_writel(~0, port[i].base + GPIO_ISR); - for (j = port[i].virtual_irq_start; - j < port[i].virtual_irq_start + 32; j++) { - irq_set_lockdep_class(j, &gpio_lock_class); - irq_set_chip_and_handler(j, &gpio_irq_chip, - handle_level_irq); - set_irq_flags(j, IRQF_VALID); - } + struct mxc_gpio_port *port; + struct resource *iores; + int err, i; + + port = kzalloc(sizeof(struct mxc_gpio_port), GFP_KERNEL); + if (!port) + return -ENOMEM; - /* register gpio chip */ - port[i].chip.direction_input = mxc_gpio_direction_input; - port[i].chip.direction_output = mxc_gpio_direction_output; - port[i].chip.get = mxc_gpio_get; - port[i].chip.set = mxc_gpio_set; - port[i].chip.base = i * 32; - port[i].chip.ngpio = 32; + port->virtual_irq_start = MXC_GPIO_IRQ_START + pdev->id * 32; - spin_lock_init(&port[i].lock); + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!iores) { + err = -ENODEV; + goto out_kfree; + } - /* its a serious configuration bug when it fails */ - BUG_ON( gpiochip_add(&port[i].chip) < 0 ); + if (!request_mem_region(iores->start, resource_size(iores), + pdev->name)) { + err = -EBUSY; + goto out_kfree; + } - if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) { - /* setup one handler for each entry */ - irq_set_chained_handler(port[i].irq, - mx3_gpio_irq_handler); - irq_set_handler_data(port[i].irq, &port[i]); - if (port[i].irq_high) { - /* setup handler for GPIO 16 to 31 */ - irq_set_chained_handler(port[i].irq_high, - mx3_gpio_irq_handler); - irq_set_handler_data(port[i].irq_high, - &port[i]); - } - } + port->base = ioremap(iores->start, resource_size(iores)); + if (!port->base) { + err = -ENOMEM; + goto out_release_mem; + } + + port->irq_high = platform_get_irq(pdev, 1); + port->irq = platform_get_irq(pdev, 0); + if (port->irq < 0) { + err = -EINVAL; + goto out_iounmap; + } + + /* disable the interrupt and clear the status */ + writel(0, port->base + GPIO_IMR); + writel(~0, port->base + GPIO_ISR); + + for (i = port->virtual_irq_start; + i < port->virtual_irq_start + 32; i++) { + irq_set_lockdep_class(i, &gpio_lock_class); + irq_set_chip_and_handler(i, &gpio_irq_chip, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + irq_set_chip_data(i, port); } if (cpu_is_mx2()) { /* setup one handler for all GPIO interrupts */ - irq_set_chained_handler(port[0].irq, mx2_gpio_irq_handler); - irq_set_handler_data(port[0].irq, port); + if (pdev->id == 0) + irq_set_chained_handler(port->irq, + mx2_gpio_irq_handler); + } else { + /* setup one handler for each entry */ + irq_set_chained_handler(port->irq, mx3_gpio_irq_handler); + irq_set_handler_data(port->irq, port); + if (port->irq_high > 0) { + /* setup handler for GPIO 16 to 31 */ + irq_set_chained_handler(port->irq_high, + mx3_gpio_irq_handler); + irq_set_handler_data(port->irq_high, port); + } } + /* register gpio chip */ + port->chip.direction_input = mxc_gpio_direction_input; + port->chip.direction_output = mxc_gpio_direction_output; + port->chip.get = mxc_gpio_get; + port->chip.set = mxc_gpio_set; + port->chip.base = pdev->id * 32; + port->chip.ngpio = 32; + + spin_lock_init(&port->lock); + + err = gpiochip_add(&port->chip); + if (err) + goto out_iounmap; + + list_add_tail(&port->node, &mxc_gpio_ports); + return 0; + +out_iounmap: + iounmap(port->base); +out_release_mem: + release_mem_region(iores->start, resource_size(iores)); +out_kfree: + kfree(port); + dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err); + return err; } + +static struct platform_driver mxc_gpio_driver = { + .driver = { + .name = "gpio-mxc", + .owner = THIS_MODULE, + }, + .probe = mxc_gpio_probe, +}; + +static int __init gpio_mxc_init(void) +{ + return platform_driver_register(&mxc_gpio_driver); +} +postcore_initcall(gpio_mxc_init); + +MODULE_AUTHOR("Freescale Semiconductor, " + "Daniel Mack , " + "Juergen Beisert "); +MODULE_DESCRIPTION("Freescale MXC GPIO"); +MODULE_LICENSE("GPL");