diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9d2e825..26e9251 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -485,14 +485,6 @@ config ARCH_NETX
 	help
 	  This enables support for systems based on the Hilscher NetX Soc
 
-config ARCH_H720X
-	bool "Hynix HMS720x-based"
-	select ARCH_USES_GETTIMEOFFSET
-	select CPU_ARM720T
-	select ISA_DMA_API
-	help
-	  This enables support for systems based on the Hynix HMS720x
-
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
@@ -1041,8 +1033,6 @@ source "arch/arm/mach-ep93xx/Kconfig"
 
 source "arch/arm/mach-footbridge/Kconfig"
 
-source "arch/arm/mach-h720x/Kconfig"
-
 source "arch/arm/mach-highbank/Kconfig"
 
 source "arch/arm/mach-integrator/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index b514a0a..5f4576d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -145,7 +145,6 @@ machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
 machine-$(CONFIG_ARCH_DOVE)		+= dove
 machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
 machine-$(CONFIG_ARCH_EP93XX)		+= ep93xx
-machine-$(CONFIG_ARCH_H720X)		+= h720x
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
 machine-$(CONFIG_ARCH_IOP13XX)		+= iop13xx
diff --git a/arch/arm/configs/h7201_defconfig b/arch/arm/configs/h7201_defconfig
deleted file mode 100644
index bee94d2..0000000
--- a/arch/arm/configs/h7201_defconfig
+++ /dev/null
@@ -1,27 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_ARCH_H720X=y
-CONFIG_ARCH_H7201=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_EXT2_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig
deleted file mode 100644
index e16d3f3..0000000
--- a/arch/arm/configs/h7202_defconfig
+++ /dev/null
@@ -1,47 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
-CONFIG_ARCH_H720X=y
-CONFIG_ARCH_H7202=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,19200"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_H720X=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB_GADGET=m
-CONFIG_USB_ZERO=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_EXT2_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/mach-h720x/Kconfig b/arch/arm/mach-h720x/Kconfig
deleted file mode 100644
index 6bb755b..0000000
--- a/arch/arm/mach-h720x/Kconfig
+++ /dev/null
@@ -1,40 +0,0 @@
-if ARCH_H720X
-
-menu "h720x Implementations"
-
-config ARCH_H7201
-	bool "gms30c7201"
-	depends on ARCH_H720X
-	select CPU_H7201
-	select ZONE_DMA
-	help
-	  Say Y here if you are using the Hynix GMS30C7201 Reference Board
-
-config ARCH_H7202
-	bool "hms30c7202"
-	depends on ARCH_H720X
-	select CPU_H7202
-	select ZONE_DMA
-	help
-	  Say Y here if you are using the Hynix HMS30C7202 Reference Board
-
-endmenu
-
-config CPU_H7201
-	bool
-	help
-	  Select code specific to h7201 variants
-
-config CPU_H7202
-	bool
-	help
-	  Select code specific to h7202 variants
-config H7202_SERIAL23
-	depends on CPU_H7202
-	bool "Use serial ports 2+3"
-	help
-	  Say Y here if you wish to use serial ports 2+3. They share their
-	  pins with the keyboard matrix controller, so you have to decide.
-
-
-endif
diff --git a/arch/arm/mach-h720x/Makefile b/arch/arm/mach-h720x/Makefile
deleted file mode 100644
index e4cf728..0000000
--- a/arch/arm/mach-h720x/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Common support
-obj-y := common.o
-obj-m :=
-obj-n :=
-obj-  :=
-
-# Specific board support
-
-obj-$(CONFIG_ARCH_H7201)		+= h7201-eval.o
-obj-$(CONFIG_ARCH_H7202)		+= h7202-eval.o
-obj-$(CONFIG_CPU_H7201) 		+= cpu-h7201.o
-obj-$(CONFIG_CPU_H7202) 		+= cpu-h7202.o
diff --git a/arch/arm/mach-h720x/Makefile.boot b/arch/arm/mach-h720x/Makefile.boot
deleted file mode 100644
index d875a70..0000000
--- a/arch/arm/mach-h720x/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-$(CONFIG_ARCH_H720X)	+= 0x40008000
-
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
deleted file mode 100644
index 17ef91f..0000000
--- a/arch/arm/mach-h720x/common.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/common.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *               2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * common stuff for Hynix h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/sched.h>
-#include <linux/mman.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/dma.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <mach/irqs.h>
-
-#include <asm/mach/dma.h>
-
-#if 0
-#define IRQDBG(args...) printk(args)
-#else
-#define IRQDBG(args...) do {} while(0)
-#endif
-
-void __init arch_dma_init(dma_t *dma)
-{
-}
-
-/*
- * Return nsecs since last timer reload
- * (timercount * (usecs perjiffie)) / (ticks per jiffie)
- */
-u32 h720x_gettimeoffset(void)
-{
-	return ((CPU_REG(TIMER_VIRT, TM0_COUNT) * tick_usec) / LATCH) * 1000;
-}
-
-/*
- * mask Global irq's
- */
-static void mask_global_irq(struct irq_data *d)
-{
-	CPU_REG (IRQC_VIRT, IRQC_IER) &= ~(1 << d->irq);
-}
-
-/*
- * unmask Global irq's
- */
-static void unmask_global_irq(struct irq_data *d)
-{
-	CPU_REG (IRQC_VIRT, IRQC_IER) |= (1 << d->irq);
-}
-
-
-/*
- * ack GPIO irq's
- * Ack only for edge triggered int's valid
- */
-static void inline ack_gpio_irq(struct irq_data *d)
-{
-	u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq));
-	u32 bit = IRQ_TO_BIT(d->irq);
-	if ( (CPU_REG (reg_base, GPIO_EDGE) & bit))
-		CPU_REG (reg_base, GPIO_CLR) = bit;
-}
-
-/*
- * mask GPIO irq's
- */
-static void inline mask_gpio_irq(struct irq_data *d)
-{
-	u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq));
-	u32 bit = IRQ_TO_BIT(d->irq);
-	CPU_REG (reg_base, GPIO_MASK) &= ~bit;
-}
-
-/*
- * unmask GPIO irq's
- */
-static void inline unmask_gpio_irq(struct irq_data *d)
-{
-	u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq));
-	u32 bit = IRQ_TO_BIT(d->irq);
-	CPU_REG (reg_base, GPIO_MASK) |= bit;
-}
-
-static void
-h720x_gpio_handler(unsigned int mask, unsigned int irq,
-                 struct irq_desc *desc)
-{
-	IRQDBG("%s irq: %d\n", __func__, irq);
-	while (mask) {
-		if (mask & 1) {
-			IRQDBG("handling irq %d\n", irq);
-			generic_handle_irq(irq);
-		}
-		irq++;
-		mask >>= 1;
-	}
-}
-
-static void
-h720x_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = CPU_REG(GPIO_A_VIRT,GPIO_STAT);
-	irq = IRQ_CHAINED_GPIOA(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
-	h720x_gpio_handler(mask, irq, desc);
-}
-
-static void
-h720x_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-	mask = CPU_REG(GPIO_B_VIRT,GPIO_STAT);
-	irq = IRQ_CHAINED_GPIOB(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
-	h720x_gpio_handler(mask, irq, desc);
-}
-
-static void
-h720x_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = CPU_REG(GPIO_C_VIRT,GPIO_STAT);
-	irq = IRQ_CHAINED_GPIOC(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
-	h720x_gpio_handler(mask, irq, desc);
-}
-
-static void
-h720x_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = CPU_REG(GPIO_D_VIRT,GPIO_STAT);
-	irq = IRQ_CHAINED_GPIOD(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
-	h720x_gpio_handler(mask, irq, desc);
-}
-
-#ifdef CONFIG_CPU_H7202
-static void
-h720x_gpioe_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = CPU_REG(GPIO_E_VIRT,GPIO_STAT);
-	irq = IRQ_CHAINED_GPIOE(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
-	h720x_gpio_handler(mask, irq, desc);
-}
-#endif
-
-static struct irq_chip h720x_global_chip = {
-	.irq_ack = mask_global_irq,
-	.irq_mask = mask_global_irq,
-	.irq_unmask = unmask_global_irq,
-};
-
-static struct irq_chip h720x_gpio_chip = {
-	.irq_ack = ack_gpio_irq,
-	.irq_mask = mask_gpio_irq,
-	.irq_unmask = unmask_gpio_irq,
-};
-
-/*
- * Initialize IRQ's, mask all, enable multiplexed irq's
- */
-void __init h720x_init_irq (void)
-{
-	int 	irq;
-
-	/* Mask global irq's */
-	CPU_REG (IRQC_VIRT, IRQC_IER) = 0x0;
-
-	/* Mask all multiplexed irq's */
-	CPU_REG (GPIO_A_VIRT, GPIO_MASK) = 0x0;
-	CPU_REG (GPIO_B_VIRT, GPIO_MASK) = 0x0;
-	CPU_REG (GPIO_C_VIRT, GPIO_MASK) = 0x0;
-	CPU_REG (GPIO_D_VIRT, GPIO_MASK) = 0x0;
-
-	/* Initialize global IRQ's, fast path */
-	for (irq = 0; irq < NR_GLBL_IRQS; irq++) {
-		irq_set_chip_and_handler(irq, &h720x_global_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	/* Initialize multiplexed IRQ's, slow path */
-	for (irq = IRQ_CHAINED_GPIOA(0) ; irq <= IRQ_CHAINED_GPIOD(31); irq++) {
-		irq_set_chip_and_handler(irq, &h720x_gpio_chip,
-					 handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID );
-	}
-	irq_set_chained_handler(IRQ_GPIOA, h720x_gpioa_demux_handler);
-	irq_set_chained_handler(IRQ_GPIOB, h720x_gpiob_demux_handler);
-	irq_set_chained_handler(IRQ_GPIOC, h720x_gpioc_demux_handler);
-	irq_set_chained_handler(IRQ_GPIOD, h720x_gpiod_demux_handler);
-
-#ifdef CONFIG_CPU_H7202
-	for (irq = IRQ_CHAINED_GPIOE(0) ; irq <= IRQ_CHAINED_GPIOE(31); irq++) {
-		irq_set_chip_and_handler(irq, &h720x_gpio_chip,
-					 handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID );
-	}
-	irq_set_chained_handler(IRQ_GPIOE, h720x_gpioe_demux_handler);
-#endif
-
-	/* Enable multiplexed irq's */
-	CPU_REG (IRQC_VIRT, IRQC_IER) = IRQ_ENA_MUX;
-}
-
-static struct map_desc h720x_io_desc[] __initdata = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-/* Initialize io tables */
-void __init h720x_map_io(void)
-{
-	iotable_init(h720x_io_desc,ARRAY_SIZE(h720x_io_desc));
-}
-
-void h720x_restart(char mode, const char *cmd)
-{
-	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
-}
-
-static void h720x__idle(void)
-{
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
-	nop();
-	nop();
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
-	nop();
-	nop();
-}
-
-static int __init h720x_idle_init(void)
-{
-	arm_pm_idle = h720x__idle;
-	return 0;
-}
-
-arch_initcall(h720x_idle_init);
diff --git a/arch/arm/mach-h720x/common.h b/arch/arm/mach-h720x/common.h
deleted file mode 100644
index 7e73841..0000000
--- a/arch/arm/mach-h720x/common.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/common.h
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *               2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * Architecture specific stuff for Hynix GMS30C7201 development board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-extern u32 h720x_gettimeoffset(void);
-extern void __init h720x_init_irq(void);
-extern void __init h720x_map_io(void);
-extern void h720x_restart(char, const char *);
-
-#ifdef CONFIG_ARCH_H7202
-extern void h7202_timer_init(void);
-extern void __init init_hw_h7202(void);
-extern void __init h7202_init_irq(void);
-extern void __init h7202_init_time(void);
-#endif
-
-#ifdef CONFIG_ARCH_H7201
-extern void h7201_timer_init(void);
-#endif
diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c
deleted file mode 100644
index 13c7412..0000000
--- a/arch/arm/mach-h720x/cpu-h7201.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/cpu-h7201.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *               2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * processor specific stuff for the Hynix h7201
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <asm/types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include "common.h"
-/*
- * Timer interrupt handler
- */
-static irqreturn_t
-h7201_timer_interrupt(int irq, void *dev_id)
-{
-	CPU_REG (TIMER_VIRT, TIMER_TOPSTAT);
-	timer_tick();
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction h7201_timer_irq = {
-	.name		= "h7201 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= h7201_timer_interrupt,
-};
-
-/*
- * Setup TIMER0 as system timer
- */
-void __init h7201_timer_init(void)
-{
-	arch_gettimeoffset = h720x_gettimeoffset;
-
-	CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
-	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
-	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
-	CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) = ENABLE_TM0_INTR | TIMER_ENABLE_BIT;
-
-	setup_irq(IRQ_TIMER0, &h7201_timer_irq);
-}
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
deleted file mode 100644
index e2ae7e8..0000000
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/cpu-h7202.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *               2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * processor specific stuff for the Hynix h7202
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <asm/types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include "common.h"
-
-static struct resource h7202ps2_resources[] = {
-	[0] = {
-		.start	= 0x8002c000,
-		.end	= 0x8002c040,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PS2,
-		.end	= IRQ_PS2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device h7202ps2_device = {
-	.name		= "h7202ps2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(h7202ps2_resources),
-	.resource	= h7202ps2_resources,
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.membase	= (void*)SERIAL0_VIRT,
-		.mapbase	= SERIAL0_BASE,
-		.irq		= IRQ_UART0,
-		.uartclk	= 2*1843200,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{
-		.membase	= (void*)SERIAL1_VIRT,
-		.mapbase	= SERIAL1_BASE,
-		.irq		= IRQ_UART1,
-		.uartclk	= 2*1843200,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-#ifdef CONFIG_H7202_SERIAL23
-	{
-		.membase	= (void*)SERIAL2_VIRT,
-		.mapbase	= SERIAL2_BASE,
-		.irq		= IRQ_UART2,
-		.uartclk	= 2*1843200,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{
-		.membase	= (void*)SERIAL3_VIRT,
-		.mapbase	= SERIAL3_BASE,
-		.irq		= IRQ_UART3,
-		.uartclk	= 2*1843200,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-#endif
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&h7202ps2_device,
-	&serial_device,
-};
-
-/* Although we have two interrupt lines for the timers, we only have one
- * status register which clears all pending timer interrupts on reading. So
- * we have to handle all timer interrupts in one place.
- */
-static void
-h7202_timerx_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = CPU_REG (TIMER_VIRT, TIMER_TOPSTAT);
-
-	if ( mask & TSTAT_T0INT ) {
-		timer_tick();
-		if( mask == TSTAT_T0INT )
-			return;
-	}
-
-	mask >>= 1;
-	irq = IRQ_TIMER1;
-	while (mask) {
-		if (mask & 1)
-			generic_handle_irq(irq);
-		irq++;
-		mask >>= 1;
-	}
-}
-
-/*
- * Timer interrupt handler
- */
-static irqreturn_t
-h7202_timer_interrupt(int irq, void *dev_id)
-{
-	h7202_timerx_demux_handler(0, NULL);
-	return IRQ_HANDLED;
-}
-
-/*
- * mask multiplexed timer IRQs
- */
-static void inline __mask_timerx_irq(unsigned int irq)
-{
-	unsigned int bit;
-	bit = 2 << ((irq == IRQ_TIMER64B) ? 4 : (irq - IRQ_TIMER1));
-	CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) &= ~bit;
-}
-
-static void inline mask_timerx_irq(struct irq_data *d)
-{
-	__mask_timerx_irq(d->irq);
-}
-
-/*
- * unmask multiplexed timer IRQs
- */
-static void inline unmask_timerx_irq(struct irq_data *d)
-{
-	unsigned int bit;
-	bit = 2 << ((d->irq == IRQ_TIMER64B) ? 4 : (d->irq - IRQ_TIMER1));
-	CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) |= bit;
-}
-
-static struct irq_chip h7202_timerx_chip = {
-	.irq_ack = mask_timerx_irq,
-	.irq_mask = mask_timerx_irq,
-	.irq_unmask = unmask_timerx_irq,
-};
-
-static struct irqaction h7202_timer_irq = {
-	.name		= "h7202 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= h7202_timer_interrupt,
-};
-
-/*
- * Setup TIMER0 as system timer
- */
-void __init h7202_timer_init(void)
-{
-	arch_gettimeoffset = h720x_gettimeoffset;
-
-	CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
-	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
-	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
-	CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) = ENABLE_TM0_INTR | TIMER_ENABLE_BIT;
-
-	setup_irq(IRQ_TIMER0, &h7202_timer_irq);
-}
-
-void __init h7202_init_irq (void)
-{
-	int 	irq;
-
-	CPU_REG (GPIO_E_VIRT, GPIO_MASK) = 0x0;
-
-	for (irq = IRQ_TIMER1;
-	                  irq < IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS); irq++) {
-		__mask_timerx_irq(irq);
-		irq_set_chip_and_handler(irq, &h7202_timerx_chip,
-					 handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID );
-	}
-	irq_set_chained_handler(IRQ_TIMERX, h7202_timerx_demux_handler);
-
-	h720x_init_irq();
-}
-
-void __init init_hw_h7202(void)
-{
-	/* Enable clocks */
-	CPU_REG (PMU_BASE, PMU_PLL_CTRL) |= PLL_2_EN | PLL_1_EN | PLL_3_MUTE;
-
-	CPU_REG (SERIAL0_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
-	CPU_REG (SERIAL1_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
-#ifdef CONFIG_H7202_SERIAL23
-	CPU_REG (SERIAL2_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
-	CPU_REG (SERIAL3_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
-	CPU_IO (GPIO_AMULSEL) = AMULSEL_USIN2 | AMULSEL_USOUT2 |
-	                        AMULSEL_USIN3 | AMULSEL_USOUT3;
-#endif
-	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
-}
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
deleted file mode 100644
index 4fdeb68..0000000
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/h7201-eval.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *               2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * Architecture specific stuff for Hynix GMS30C7201 development board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/device.h>
-
-#include <asm/setup.h>
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include "common.h"
-
-MACHINE_START(H7201, "Hynix GMS30C7201")
-	/* Maintainer: Robert Schwebel, Pengutronix */
-	.atag_offset	= 0x1000,
-	.map_io		= h720x_map_io,
-	.init_irq	= h720x_init_irq,
-	.init_time	= h7201_timer_init,
-	.dma_zone_size	= SZ_256M,
-	.restart	= h720x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
deleted file mode 100644
index f68e967..0000000
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/h7202-eval.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *		 2004 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * Architecture specific stuff for Hynix HMS30C7202 development board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <asm/setup.h>
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/mach/arch.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include "common.h"
-
-static struct resource cirrus_resources[] = {
-	[0] = {
-		.start	= ETH0_PHYS + 0x300,
-		.end	= ETH0_PHYS + 0x300 + 0x10,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CHAINED_GPIOB(8),
-		.end	= IRQ_CHAINED_GPIOB(8),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cirrus_device = {
-	.name		= "cirrus-cs89x0",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(cirrus_resources),
-	.resource	= cirrus_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&cirrus_device,
-};
-
-/*
- * Hardware init. This is called early in initcalls
- * Place pin inits here. So you avoid adding ugly
- * #ifdef stuff to common drivers.
- * Use this only, if your bootloader is not able
- * to initialize the pins proper.
- */
-static void __init init_eval_h7202(void)
-{
-	init_hw_h7202();
-	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	/* Enable interrupt on portb bit 8 (ethernet) */
-	CPU_REG (GPIO_B_VIRT, GPIO_POL) &= ~(1 << 8);
-	CPU_REG (GPIO_B_VIRT, GPIO_EN) |= (1 << 8);
-}
-
-MACHINE_START(H7202, "Hynix HMS30C7202")
-	/* Maintainer: Robert Schwebel, Pengutronix */
-	.atag_offset	= 0x100,
-	.map_io		= h720x_map_io,
-	.init_irq	= h7202_init_irq,
-	.init_time	= h7202_timer_init,
-	.init_machine	= init_eval_h7202,
-	.dma_zone_size	= SZ_256M,
-	.restart	= h720x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-h720x/include/mach/boards.h b/arch/arm/mach-h720x/include/mach/boards.h
deleted file mode 100644
index 38b8e0d..0000000
--- a/arch/arm/mach-h720x/include/mach/boards.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/boards.h
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * This file contains the board specific defines for various devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_INCMACH_H
-#error Do not include this file directly. Include asm/hardware.h instead !
-#endif
-
-/* Hynix H7202 developer board specific device defines */
-#ifdef CONFIG_ARCH_H7202
-
-/* FLASH */
-#define H720X_FLASH_VIRT	0xd0000000
-#define H720X_FLASH_PHYS	0x00000000
-#define H720X_FLASH_SIZE	0x02000000
-
-/* onboard LAN controller */
-# define ETH0_PHYS		0x08000000
-
-/* Touch screen defines */
-/* GPIO Port */
-#define PEN_GPIO		GPIO_B_VIRT
-/* Bitmask for pen down interrupt */
-#define PEN_INT_BIT		(1<<7)
-/* Bitmask for pen up interrupt */
-#define PEN_ENA_BIT		(1<<6)
-/* pen up interrupt */
-#define IRQ_PEN			IRQ_MUX_GPIOB(7)
-
-#endif
-
-/* Hynix H7201 developer board specific device defines */
-#if defined (CONFIG_ARCH_H7201)
-/* ROM DISK SPACE */
-#define ROM_DISK_BASE           0xc1800000
-#define ROM_DISK_START          0x41800000
-#define ROM_DISK_SIZE           0x00700000
-
-/* SRAM DISK SPACE */
-#define SRAM_DISK_BASE          0xf1000000
-#define SRAM_DISK_START         0x04000000
-#define SRAM_DISK_SIZE          0x00400000
-#endif
-
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
deleted file mode 100644
index 8a46157..0000000
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* arch/arm/mach-h720x/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <mach/hardware.h>
-
-		.equ    io_virt, IO_VIRT
-		.equ    io_phys, IO_PHYS
-
-		.macro  addruart, rp, rv, tmp
-		mov     \rp, #0x00020000	@ UART1
-		add     \rv, \rp, #io_virt	@ virtual address
-		add     \rp, \rp, #io_phys	@ physical base address
-		.endm
-
-		.macro  senduart,rd,rx
-		str     \rd, [\rx, #0x0]        @ UARTDR
-
-		.endm
-
-		.macro  waituart,rd,rx
-1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
-		tst     \rd, #1 << 5	       @ UARTFLGUTXFF - 1 when full
-		bne     1001b
-		.endm
-
-		.macro  busyuart,rd,rx
-1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
-		tst     \rd, #1 << 3	       @ UARTFLGUBUSY - 1 when busy
-		bne     1001b
-		.endm
diff --git a/arch/arm/mach-h720x/include/mach/entry-macro.S b/arch/arm/mach-h720x/include/mach/entry-macro.S
deleted file mode 100644
index 75267fa..0000000
--- a/arch/arm/mach-h720x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Hynix HMS720x based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
-		@ we could use the id register on H7202, but this is not
-		@ properly updated when we come back from asm_do_irq
-		@ without a previous return from interrupt
-		@ (see loops below in irq_svc, irq_usr)
-		@ We see unmasked pending ints only, as the masked pending ints
-		@ are not visible here
-
-		mov     \base, #0xf0000000	       @ base register
-		orr     \base, \base, #0x24000	       @ irqbase
-		ldr     \irqstat, [\base, #0x04]        @ get interrupt status
-#if defined (CONFIG_CPU_H7201)
-		ldr	\tmp, =0x001fffff
-#else
-		mvn     \tmp, #0xc0000000
-#endif
-		and     \irqstat, \irqstat, \tmp        @ mask out unused ints
-		mov     \irqnr, #0
-
-		mov     \tmp, #0xff00
-		orr     \tmp, \tmp, #0xff
-		tst     \irqstat, \tmp
-		addeq   \irqnr, \irqnr, #16
-		moveq   \irqstat, \irqstat, lsr #16
-		tst     \irqstat, #255
-		addeq   \irqnr, \irqnr, #8
-		moveq   \irqstat, \irqstat, lsr #8
-		tst     \irqstat, #15
-		addeq   \irqnr, \irqnr, #4
-		moveq   \irqstat, \irqstat, lsr #4
-		tst     \irqstat, #3
-		addeq   \irqnr, \irqnr, #2
-		moveq   \irqstat, \irqstat, lsr #2
-		tst     \irqstat, #1
-		addeq   \irqnr, \irqnr, #1
-		moveq   \irqstat, \irqstat, lsr #1
-		tst     \irqstat, #1		       @ bit 0 should be set
-		.endm
-
-#else
-#error hynix processor selection missmatch
-#endif
-
diff --git a/arch/arm/mach-h720x/include/mach/h7201-regs.h b/arch/arm/mach-h720x/include/mach/h7201-regs.h
deleted file mode 100644
index 611b494..0000000
--- a/arch/arm/mach-h720x/include/mach/h7201-regs.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/h7201-regs.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#define SERIAL2_VIRT 		(IO_VIRT + 0x50100)
-#define SERIAL3_VIRT 		(IO_VIRT + 0x50200)
-
-/*
- * PCMCIA
- */
-#define PCMCIA0_ATT_BASE        0xe5000000
-#define PCMCIA0_ATT_SIZE        0x00200000
-#define PCMCIA0_ATT_START       0x20000000
-#define PCMCIA0_MEM_BASE        0xe5200000
-#define PCMCIA0_MEM_SIZE        0x00200000
-#define PCMCIA0_MEM_START       0x24000000
-#define PCMCIA0_IO_BASE         0xe5400000
-#define PCMCIA0_IO_SIZE         0x00200000
-#define PCMCIA0_IO_START        0x28000000
-
-#define PCMCIA1_ATT_BASE        0xe5600000
-#define PCMCIA1_ATT_SIZE        0x00200000
-#define PCMCIA1_ATT_START       0x30000000
-#define PCMCIA1_MEM_BASE        0xe5800000
-#define PCMCIA1_MEM_SIZE        0x00200000
-#define PCMCIA1_MEM_START       0x34000000
-#define PCMCIA1_IO_BASE         0xe5a00000
-#define PCMCIA1_IO_SIZE         0x00200000
-#define PCMCIA1_IO_START        0x38000000
-
-#define PRIME3C_BASE            0xf0050000
-#define PRIME3C_SIZE            0x00001000
-#define PRIME3C_START           0x10000000
-
-/* VGA Controller */
-#define VGA_RAMBASE 		0x50
-#define VGA_TIMING0 		0x60
-#define VGA_TIMING1 		0x64
-#define VGA_TIMING2 		0x68
-#define VGA_TIMING3 		0x6c
-
-#define LCD_CTRL_VGA_ENABLE   	0x00000100
-#define LCD_CTRL_VGA_BPP_MASK 	0x00000600
-#define LCD_CTRL_VGA_4BPP    	0x00000000
-#define LCD_CTRL_VGA_8BPP    	0x00000200
-#define LCD_CTRL_VGA_16BPP   	0x00000300
-#define LCD_CTRL_SHARE_DMA    	0x00000800
-#define LCD_CTRL_VDE          	0x00100000
-#define LCD_CTRL_LPE          	0x00400000	/* LCD Power enable */
-#define LCD_CTRL_BLE          	0x00800000	/* LCD backlight enable */
-
-#define VGA_PALETTE_BASE	(IO_VIRT + 0x10800)
diff --git a/arch/arm/mach-h720x/include/mach/h7202-regs.h b/arch/arm/mach-h720x/include/mach/h7202-regs.h
deleted file mode 100644
index 17c12eb..0000000
--- a/arch/arm/mach-h720x/include/mach/h7202-regs.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/h7202-regs.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#define SERIAL2_OFS		0x2d000
-#define SERIAL2_BASE		(IO_PHYS + SERIAL2_OFS)
-#define SERIAL2_VIRT 		(IO_VIRT + SERIAL2_OFS)
-#define SERIAL3_OFS		0x2e000
-#define SERIAL3_BASE		(IO_PHYS + SERIAL3_OFS)
-#define SERIAL3_VIRT 		(IO_VIRT + SERIAL3_OFS)
-
-/* Matrix Keyboard Controller */
-#define KBD_VIRT		(IO_VIRT + 0x22000)
-#define KBD_KBCR		0x00
-#define KBD_KBSC		0x04
-#define KBD_KBTR		0x08
-#define KBD_KBVR0		0x0C
-#define KBD_KBVR1		0x10
-#define KBD_KBSR		0x18
-
-#define KBD_KBCR_SCANENABLE	(1 << 7)
-#define KBD_KBCR_NPOWERDOWN	(1 << 2)
-#define KBD_KBCR_CLKSEL_MASK	(3)
-#define KBD_KBCR_CLKSEL_PCLK2	0x0
-#define KBD_KBCR_CLKSEL_PCLK128	0x1
-#define KBD_KBCR_CLKSEL_PCLK256	0x2
-#define KBD_KBCR_CLKSEL_PCLK512	0x3
-
-#define KBD_KBSR_INTR		(1 << 0)
-#define KBD_KBSR_WAKEUP		(1 << 1)
-
-/* USB device controller */
-
-#define USBD_BASE		(IO_VIRT + 0x12000)
-#define USBD_LENGTH		0x3C
-
-#define USBD_GCTRL		0x00
-#define USBD_EPCTRL		0x04
-#define USBD_INTMASK		0x08
-#define USBD_INTSTAT		0x0C
-#define USBD_PWR		0x10
-#define USBD_DMARXTX		0x14
-#define USBD_DEVID		0x18
-#define USBD_DEVCLASS		0x1C
-#define USBD_INTCLASS		0x20
-#define USBD_SETUP0		0x24
-#define USBD_SETUP1		0x28
-#define USBD_ENDP0RD		0x2C
-#define USBD_ENDP0WT		0x30
-#define USBD_ENDP1RD		0x34
-#define USBD_ENDP2WT		0x38
-
-/* PS/2 port */
-#define PSDATA 0x00
-#define PSSTAT 0x04
-#define PSSTAT_TXEMPTY (1<<0)
-#define PSSTAT_TXBUSY (1<<1)
-#define PSSTAT_RXFULL (1<<2)
-#define PSSTAT_RXBUSY (1<<3)
-#define PSSTAT_CLKIN (1<<4)
-#define PSSTAT_DATAIN (1<<5)
-#define PSSTAT_PARITY (1<<6)
-
-#define PSCONF 0x08
-#define PSCONF_ENABLE (1<<0)
-#define PSCONF_TXINTEN (1<<2)
-#define PSCONF_RXINTEN (1<<3)
-#define PSCONF_FORCECLKLOW (1<<4)
-#define PSCONF_FORCEDATLOW (1<<5)
-#define PSCONF_LCE (1<<6)
-
-#define PSINTR 0x0C
-#define PSINTR_TXINT (1<<0)
-#define PSINTR_RXINT (1<<1)
-#define PSINTR_PAR (1<<2)
-#define PSINTR_RXTO (1<<3)
-#define PSINTR_TXTO (1<<4)
-
-#define PSTDLO 0x10 /* clk low before start transmission */
-#define PSTPRI 0x14 /* PRI clock */
-#define PSTXMT 0x18 /* maximum transmission time */
-#define PSTREC 0x20 /* maximum receive time */
-#define PSPWDN 0x3c
-
-/* ADC converter */
-#define ADC_BASE 		(IO_VIRT + 0x29000)
-#define ADC_CR 			0x00
-#define ADC_TSCTRL 		0x04
-#define ADC_BT_CTRL 		0x08
-#define ADC_MC_CTRL		0x0C
-#define ADC_STATUS		0x10
-
-/* ADC control register bits */
-#define ADC_CR_PW_CTRL 		0x80
-#define ADC_CR_DIRECTC		0x04
-#define ADC_CR_CONTIME_NO	0x00
-#define ADC_CR_CONTIME_2	0x04
-#define ADC_CR_CONTIME_4	0x08
-#define ADC_CR_CONTIME_ADE	0x0c
-#define ADC_CR_LONGCALTIME	0x01
-
-/* ADC touch panel register bits */
-#define ADC_TSCTRL_ENABLE 	0x80
-#define ADC_TSCTRL_INTR   	0x40
-#define	ADC_TSCTRL_SWBYPSS	0x20
-#define ADC_TSCTRL_SWINVT	0x10
-#define ADC_TSCTRL_S400   	0x03
-#define ADC_TSCTRL_S200   	0x02
-#define ADC_TSCTRL_S100   	0x01
-#define ADC_TSCTRL_S50    	0x00
-
-/* ADC Interrupt Status Register bits */
-#define ADC_STATUS_TS_BIT	0x80
-#define ADC_STATUS_MBT_BIT	0x40
-#define ADC_STATUS_BBT_BIT	0x20
-#define ADC_STATUS_MIC_BIT	0x10
-
-/* Touch data registers */
-#define ADC_TS_X0X1  		0x30
-#define ADC_TS_X2X3		0x34
-#define ADC_TS_Y0Y1		0x38
-#define ADC_TS_Y2Y3  		0x3c
-#define ADC_TS_X4X5  		0x40
-#define ADC_TS_X6X7  		0x44
-#define ADC_TS_Y4Y5		0x48
-#define ADC_TS_Y6Y7		0x50
-
-/* battery data */
-#define ADC_MB_DATA		0x54
-#define ADC_BB_DATA		0x58
-
-/* Sound data register */
-#define ADC_SD_DAT0 		0x60
-#define ADC_SD_DAT1		0x64
-#define ADC_SD_DAT2		0x68
-#define ADC_SD_DAT3		0x6c
-#define ADC_SD_DAT4		0x70
-#define ADC_SD_DAT5		0x74
-#define ADC_SD_DAT6		0x78
-#define ADC_SD_DAT7		0x7c
diff --git a/arch/arm/mach-h720x/include/mach/hardware.h b/arch/arm/mach-h720x/include/mach/hardware.h
deleted file mode 100644
index c55a52c..0000000
--- a/arch/arm/mach-h720x/include/mach/hardware.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/hardware.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define IOCLK (3686400L)
-
-/* Onchip peripherals */
-
-#define IO_VIRT			0xf0000000	/* IO peripherals */
-#define IO_PHYS			0x80000000
-#define IO_SIZE			0x00050000
-
-#ifdef CONFIG_CPU_H7202
-#include "h7202-regs.h"
-#elif defined CONFIG_CPU_H7201
-#include "h7201-regs.h"
-#else
-#error machine definition mismatch
-#endif
-
-/* Macro to access the CPU IO */
-#define CPU_IO(x) (*(volatile u32*)(x))
-
-/* Macro to access general purpose regs (base, offset) */
-#define CPU_REG(x,y) CPU_IO(x+y)
-
-/* Macro to access irq related regs */
-#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x)
-
-/* CPU registers */
-/* general purpose I/O */
-#define GPIO_VIRT(x)		(IO_VIRT + 0x23000 + ((x)<<5))
-#define GPIO_A_VIRT		(GPIO_VIRT(0))
-#define GPIO_B_VIRT		(GPIO_VIRT(1))
-#define GPIO_C_VIRT		(GPIO_VIRT(2))
-#define GPIO_D_VIRT		(GPIO_VIRT(3))
-#define GPIO_E_VIRT		(GPIO_VIRT(4))
-#define GPIO_AMULSEL		(GPIO_VIRT(0) + 0xA4)
-
-#define AMULSEL_USIN2	(1<<5)
-#define AMULSEL_USOUT2	(1<<6)
-#define AMULSEL_USIN3	(1<<13)
-#define AMULSEL_USOUT3	(1<<14)
-#define AMULSEL_IRDIN	(1<<15)
-#define AMULSEL_IRDOUT	(1<<7)
-
-/* Register offsets general purpose I/O */
-#define GPIO_DATA		0x00
-#define GPIO_DIR		0x04
-#define GPIO_MASK		0x08
-#define GPIO_STAT		0x0C
-#define GPIO_EDGE		0x10
-#define GPIO_CLR		0x14
-#define GPIO_POL		0x18
-#define GPIO_EN			0x1C
-
-/*interrupt controller */
-#define IRQC_VIRT		(IO_VIRT + 0x24000)
-/* register offset interrupt controller */
-#define IRQC_IER		0x00
-#define IRQC_ISR		0x04
-
-/* timer unit */
-#define TIMER_VIRT		(IO_VIRT + 0x25000)
-/* Register offsets timer unit */
-#define TM0_PERIOD   		0x00
-#define TM0_COUNT    		0x08
-#define TM0_CTRL     		0x10
-#define TM1_PERIOD   		0x20
-#define TM1_COUNT    		0x28
-#define TM1_CTRL     		0x30
-#define TM2_PERIOD   		0x40
-#define TM2_COUNT    		0x48
-#define TM2_CTRL     		0x50
-#define TIMER_TOPCTRL		0x60
-#define TIMER_TOPSTAT		0x64
-#define T64_COUNTL		0x80
-#define T64_COUNTH		0x84
-#define T64_CTRL		0x88
-#define T64_BASEL		0x94
-#define T64_BASEH		0x98
-/* Bitmaks timer unit TOPSTAT reg */
-#define TSTAT_T0INT		0x1
-#define TSTAT_T1INT		0x2
-#define TSTAT_T2INT		0x4
-#define TSTAT_T3INT		0x8
-/* Bit description of TMx_CTRL register */
-#define TM_START  		0x1
-#define TM_REPEAT 		0x2
-#define TM_RESET  		0x4
-/* Bit description of TIMER_CTRL register */
-#define ENABLE_TM0_INTR  	0x1
-#define ENABLE_TM1_INTR  	0x2
-#define ENABLE_TM2_INTR  	0x4
-#define TIMER_ENABLE_BIT 	0x8
-#define ENABLE_TIMER64   	0x10
-#define ENABLE_TIMER64_INT	0x20
-
-/* PMU & PLL */
-#define PMU_BASE 		(IO_VIRT + 0x1000)
-#define PMU_MODE		0x00
-#define PMU_STAT   		0x20
-#define PMU_PLL_CTRL 		0x28
-
-/* PMU Mode bits */
-#define PMU_MODE_SLOW		0x00
-#define PMU_MODE_RUN		0x01
-#define PMU_MODE_IDLE		0x02
-#define PMU_MODE_SLEEP		0x03
-#define PMU_MODE_INIT		0x04
-#define PMU_MODE_DEEPSLEEP	0x07
-#define PMU_MODE_WAKEUP		0x08
-
-/* PMU ... */
-#define PLL_2_EN		0x8000
-#define PLL_1_EN		0x4000
-#define PLL_3_MUTE		0x0080
-
-/* Control bits for PMU/ PLL */
-#define PMU_WARMRESET		0x00010000
-#define PLL_CTRL_MASK23		0x000080ff
-
-/* LCD Controller */
-#define LCD_BASE 		(IO_VIRT + 0x10000)
-#define LCD_CTRL 		0x00
-#define LCD_STATUS		0x04
-#define LCD_STATUS_M		0x08
-#define LCD_INTERRUPT		0x0C
-#define LCD_DBAR		0x10
-#define LCD_DCAR		0x14
-#define LCD_TIMING0 		0x20
-#define LCD_TIMING1 		0x24
-#define LCD_TIMING2 		0x28
-#define LCD_TEST		0x40
-
-/* LCD Control Bits */
-#define LCD_CTRL_LCD_ENABLE   	0x00000001
-/* Bits per pixel */
-#define LCD_CTRL_LCD_BPP_MASK 	0x00000006
-#define LCD_CTRL_LCD_4BPP    	0x00000000
-#define LCD_CTRL_LCD_8BPP    	0x00000002
-#define LCD_CTRL_LCD_16BPP   	0x00000004
-#define LCD_CTRL_LCD_BW		0x00000008
-#define LCD_CTRL_LCD_TFT	0x00000010
-#define LCD_CTRL_BGR		0x00001000
-#define LCD_CTRL_LCD_VCOMP	0x00080000
-#define LCD_CTRL_LCD_MONO8	0x00200000
-#define LCD_CTRL_LCD_PWR	0x00400000
-#define LCD_CTRL_LCD_BLE	0x00800000
-#define LCD_CTRL_LDBUSEN	0x01000000
-
-/* Palette */
-#define LCD_PALETTE_BASE 	(IO_VIRT + 0x10400)
-
-/* Serial ports */
-#define SERIAL0_OFS		0x20000
-#define SERIAL0_VIRT 		(IO_VIRT + SERIAL0_OFS)
-#define SERIAL0_BASE		(IO_PHYS + SERIAL0_OFS)
-
-#define SERIAL1_OFS		0x21000
-#define SERIAL1_VIRT 		(IO_VIRT + SERIAL1_OFS)
-#define SERIAL1_BASE		(IO_PHYS + SERIAL1_OFS)
-
-#define SERIAL_ENABLE		0x30
-#define SERIAL_ENABLE_EN	(1<<0)
-
-/* General defines to pacify gcc */
-
-#define __ASM_ARCH_HARDWARE_INCMACH_H
-#include "boards.h"
-#undef __ASM_ARCH_HARDWARE_INCMACH_H
-
-#endif				/* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-h720x/include/mach/irqs.h b/arch/arm/mach-h720x/include/mach/irqs.h
deleted file mode 100644
index 430a92b..0000000
--- a/arch/arm/mach-h720x/include/mach/irqs.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/irqs.h
- *
- * Copyright (C) 2000 Jungjun Kim
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#if defined (CONFIG_CPU_H7201)
-
-#define IRQ_PMU		0		/* 0x000001 */
-#define IRQ_DMA		1 		/* 0x000002 */
-#define IRQ_LCD		2		/* 0x000004 */
-#define IRQ_VGA		3 		/* 0x000008 */
-#define IRQ_PCMCIA1 	4 		/* 0x000010 */
-#define IRQ_PCMCIA2 	5 		/* 0x000020 */
-#define IRQ_AFE		6 		/* 0x000040 */
-#define IRQ_AIC		7 		/* 0x000080 */
-#define IRQ_KEYBOARD 	8 		/* 0x000100 */
-#define IRQ_TIMER0	9 		/* 0x000200 */
-#define IRQ_RTC		10		/* 0x000400 */
-#define IRQ_SOUND	11		/* 0x000800 */
-#define IRQ_USB		12		/* 0x001000 */
-#define IRQ_IrDA 	13		/* 0x002000 */
-#define IRQ_UART0	14		/* 0x004000 */
-#define IRQ_UART1	15		/* 0x008000 */
-#define IRQ_SPI		16		/* 0x010000 */
-#define IRQ_GPIOA 	17		/* 0x020000 */
-#define IRQ_GPIOB	18		/* 0x040000 */
-#define IRQ_GPIOC	19		/* 0x080000 */
-#define IRQ_GPIOD	20		/* 0x100000 */
-#define IRQ_CommRX	21		/* 0x200000 */
-#define IRQ_CommTX	22		/* 0x400000 */
-#define IRQ_Soft	23		/* 0x800000 */
-
-#define NR_GLBL_IRQS	24
-
-#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
-#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
-#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
-#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
-#define NR_IRQS               IRQ_CHAINED_GPIOD(32)
-
-/* Enable mask for multiplexed interrupts */
-#define IRQ_ENA_MUX	(1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) \
-			| (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD)
-
-
-#elif defined (CONFIG_CPU_H7202)
-
-#define IRQ_PMU		0		/* 0x00000001 */
-#define IRQ_DMA		1		/* 0x00000002 */
-#define IRQ_LCD		2		/* 0x00000004 */
-#define IRQ_SOUND	3		/* 0x00000008 */
-#define IRQ_I2S		4		/* 0x00000010 */
-#define IRQ_USB 	5		/* 0x00000020 */
-#define IRQ_MMC 	6		/* 0x00000040 */
-#define IRQ_RTC 	7		/* 0x00000080 */
-#define IRQ_UART0 	8		/* 0x00000100 */
-#define IRQ_UART1 	9		/* 0x00000200 */
-#define IRQ_UART2 	10		/* 0x00000400 */
-#define IRQ_UART3 	11		/* 0x00000800 */
-#define IRQ_KBD 	12		/* 0x00001000 */
-#define IRQ_PS2 	13		/* 0x00002000 */
-#define IRQ_AIC 	14		/* 0x00004000 */
-#define IRQ_TIMER0 	15		/* 0x00008000 */
-#define IRQ_TIMERX 	16		/* 0x00010000 */
-#define IRQ_WDT 	17		/* 0x00020000 */
-#define IRQ_CAN0 	18		/* 0x00040000 */
-#define IRQ_CAN1 	19		/* 0x00080000 */
-#define IRQ_EXT0 	20		/* 0x00100000 */
-#define IRQ_EXT1 	21		/* 0x00200000 */
-#define IRQ_GPIOA 	22		/* 0x00400000 */
-#define IRQ_GPIOB 	23		/* 0x00800000 */
-#define IRQ_GPIOC 	24		/* 0x01000000 */
-#define IRQ_GPIOD 	25		/* 0x02000000 */
-#define IRQ_GPIOE 	26		/* 0x04000000 */
-#define IRQ_COMMRX 	27		/* 0x08000000 */
-#define IRQ_COMMTX 	28		/* 0x10000000 */
-#define IRQ_SMC 	29		/* 0x20000000 */
-#define IRQ_Soft 	30		/* 0x40000000 */
-#define IRQ_RESERVED1 	31		/* 0x80000000 */
-#define NR_GLBL_IRQS	32
-
-#define NR_TIMERX_IRQS	3
-
-#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
-#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
-#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
-#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
-#define IRQ_CHAINED_GPIOE(x)  (IRQ_CHAINED_GPIOD(32) + x)
-#define IRQ_CHAINED_TIMERX(x) (IRQ_CHAINED_GPIOE(32) + x)
-#define IRQ_TIMER1            (IRQ_CHAINED_TIMERX(0))
-#define IRQ_TIMER2            (IRQ_CHAINED_TIMERX(1))
-#define IRQ_TIMER64B          (IRQ_CHAINED_TIMERX(2))
-
-#define NR_IRQS		(IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS))
-
-/* Enable mask for multiplexed interrupts */
-#define IRQ_ENA_MUX	(1<<IRQ_TIMERX) | (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) | \
-			(1<<IRQ_GPIOC) 	| (1<<IRQ_GPIOD) | (1<<IRQ_GPIOE) | \
-			(1<<IRQ_TIMERX)
-
-#else
-#error cpu definition mismatch
-#endif
-
-/* decode irq number to register number */
-#define IRQ_TO_REGNO(irq) ((irq - NR_GLBL_IRQS) >> 5)
-#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32))
-
-#endif
diff --git a/arch/arm/mach-h720x/include/mach/isa-dma.h b/arch/arm/mach-h720x/include/mach/isa-dma.h
deleted file mode 100644
index 3eafb3f..0000000
--- a/arch/arm/mach-h720x/include/mach/isa-dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/isa-dma.h
- *
- * Architecture DMA routes
- *
- * Copyright (C) 1997.1998 Russell King
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#if defined (CONFIG_CPU_H7201)
-#define MAX_DMA_CHANNELS	3
-#elif defined (CONFIG_CPU_H7202)
-#define MAX_DMA_CHANNELS	4
-#else
-#error processor definition missmatch
-#endif
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-h720x/include/mach/timex.h b/arch/arm/mach-h720x/include/mach/timex.h
deleted file mode 100644
index 3f2f447..0000000
--- a/arch/arm/mach-h720x/include/mach/timex.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/timex.h
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX
-#define __ASM_ARCH_TIMEX
-
-#define CLOCK_TICK_RATE		3686400
-
-#endif
diff --git a/arch/arm/mach-h720x/include/mach/uncompress.h b/arch/arm/mach-h720x/include/mach/uncompress.h
deleted file mode 100644
index 43e343c..0000000
--- a/arch/arm/mach-h720x/include/mach/uncompress.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/uncompress.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/hardware.h>
-
-#define LSR 	0x14
-#define TEMPTY 	0x40
-
-static inline void putc(int c)
-{
-	volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000);
-
-	/* wait until transmit buffer is empty */
-	while((p[LSR] & TEMPTY) == 0x0)
-		barrier();
-
-	/* write next character */
-	*p = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#endif
