diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index a91c96522379..5fbfb7273f38 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -6,7 +6,7 @@
 # To add a new book the only step required is to add the book to the
 # list of DOCBOOKS.
 
-DOCBOOKS := z8530book.xml device-drivers.xml \
+DOCBOOKS := z8530book.xml  \
 	    kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
 	    writing_usb_driver.xml networking.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
deleted file mode 100644
index 9c10030eb2be..000000000000
--- a/Documentation/DocBook/device-drivers.tmpl
+++ /dev/null
@@ -1,521 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="LinuxDriversAPI">
- <bookinfo>
-  <title>Linux Device Drivers</title>
-
-  <legalnotice>
-   <para>
-     This documentation is free software; you can redistribute
-     it and/or modify it under the terms of the GNU General Public
-     License as published by the Free Software Foundation; either
-     version 2 of the License, or (at your option) any later
-     version.
-   </para>
-
-   <para>
-     This program is distributed in the hope that it will be
-     useful, but WITHOUT ANY WARRANTY; without even the implied
-     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-     See the GNU General Public License for more details.
-   </para>
-
-   <para>
-     You should have received a copy of the GNU General Public
-     License along with this program; if not, write to the Free
-     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-     MA 02111-1307 USA
-   </para>
-
-   <para>
-     For more details see the file COPYING in the source
-     distribution of Linux.
-   </para>
-  </legalnotice>
- </bookinfo>
-
-<toc></toc>
-
-  <chapter id="Basics">
-     <title>Driver Basics</title>
-     <sect1><title>Driver Entry and Exit points</title>
-!Iinclude/linux/init.h
-     </sect1>
-
-     <sect1><title>Atomic and pointer manipulation</title>
-!Iarch/x86/include/asm/atomic.h
-     </sect1>
-
-     <sect1><title>Delaying, scheduling, and timer routines</title>
-!Iinclude/linux/sched.h
-!Ekernel/sched/core.c
-!Ikernel/sched/cpupri.c
-!Ikernel/sched/fair.c
-!Iinclude/linux/completion.h
-!Ekernel/time/timer.c
-     </sect1>
-     <sect1><title>Wait queues and Wake events</title>
-!Iinclude/linux/wait.h
-!Ekernel/sched/wait.c
-     </sect1>
-     <sect1><title>High-resolution timers</title>
-!Iinclude/linux/ktime.h
-!Iinclude/linux/hrtimer.h
-!Ekernel/time/hrtimer.c
-     </sect1>
-     <sect1><title>Workqueues and Kevents</title>
-!Iinclude/linux/workqueue.h
-!Ekernel/workqueue.c
-     </sect1>
-     <sect1><title>Internal Functions</title>
-!Ikernel/exit.c
-!Ikernel/signal.c
-!Iinclude/linux/kthread.h
-!Ekernel/kthread.c
-     </sect1>
-
-     <sect1><title>Kernel objects manipulation</title>
-<!--
-X!Iinclude/linux/kobject.h
--->
-!Elib/kobject.c
-     </sect1>
-
-     <sect1><title>Kernel utility functions</title>
-!Iinclude/linux/kernel.h
-!Ekernel/printk/printk.c
-!Ekernel/panic.c
-!Ekernel/sys.c
-!Ekernel/rcu/srcu.c
-!Ekernel/rcu/tree.c
-!Ekernel/rcu/tree_plugin.h
-!Ekernel/rcu/update.c
-     </sect1>
-
-     <sect1><title>Device Resource Management</title>
-!Edrivers/base/devres.c
-     </sect1>
-
-  </chapter>
-
-  <chapter id="devdrivers">
-     <title>Device drivers infrastructure</title>
-     <sect1><title>The Basic Device Driver-Model Structures </title>
-!Iinclude/linux/device.h
-     </sect1>
-     <sect1><title>Device Drivers Base</title>
-!Idrivers/base/init.c
-!Edrivers/base/driver.c
-!Edrivers/base/core.c
-!Edrivers/base/syscore.c
-!Edrivers/base/class.c
-!Idrivers/base/node.c
-!Edrivers/base/firmware_class.c
-!Edrivers/base/transport_class.c
-<!-- Cannot be included, because
-     attribute_container_add_class_device_adapter
- and attribute_container_classdev_to_container
-     exceed allowed 44 characters maximum
-X!Edrivers/base/attribute_container.c
--->
-!Edrivers/base/dd.c
-<!--
-X!Edrivers/base/interface.c
--->
-!Iinclude/linux/platform_device.h
-!Edrivers/base/platform.c
-!Edrivers/base/bus.c
-     </sect1>
-     <sect1>
-       <title>Buffer Sharing and Synchronization</title>
-       <para>
-         The dma-buf subsystem provides the framework for sharing buffers
-         for hardware (DMA) access across multiple device drivers and
-         subsystems, and for synchronizing asynchronous hardware access.
-       </para>
-       <para>
-         This is used, for example, by drm "prime" multi-GPU support, but
-         is of course not limited to GPU use cases.
-       </para>
-       <para>
-         The three main components of this are: (1) dma-buf, representing
-         a sg_table and exposed to userspace as a file descriptor to allow
-         passing between devices, (2) fence, which provides a mechanism
-         to signal when one device as finished access, and (3) reservation,
-         which manages the shared or exclusive fence(s) associated with
-         the buffer.
-       </para>
-       <sect2><title>dma-buf</title>
-!Edrivers/dma-buf/dma-buf.c
-!Iinclude/linux/dma-buf.h
-       </sect2>
-       <sect2><title>reservation</title>
-!Pdrivers/dma-buf/reservation.c Reservation Object Overview
-!Edrivers/dma-buf/reservation.c
-!Iinclude/linux/reservation.h
-       </sect2>
-       <sect2><title>fence</title>
-!Edrivers/dma-buf/fence.c
-!Iinclude/linux/fence.h
-!Edrivers/dma-buf/seqno-fence.c
-!Iinclude/linux/seqno-fence.h
-!Edrivers/dma-buf/fence-array.c
-!Iinclude/linux/fence-array.h
-!Edrivers/dma-buf/reservation.c
-!Iinclude/linux/reservation.h
-!Edrivers/dma-buf/sync_file.c
-!Iinclude/linux/sync_file.h
-       </sect2>
-     </sect1>
-     <sect1><title>Device Drivers DMA Management</title>
-!Edrivers/base/dma-coherent.c
-!Edrivers/base/dma-mapping.c
-     </sect1>
-     <sect1><title>Device Drivers Power Management</title>
-!Edrivers/base/power/main.c
-     </sect1>
-     <sect1><title>Device Drivers ACPI Support</title>
-<!-- Internal functions only
-X!Edrivers/acpi/sleep/main.c
-X!Edrivers/acpi/sleep/wakeup.c
-X!Edrivers/acpi/motherboard.c
-X!Edrivers/acpi/bus.c
--->
-!Edrivers/acpi/scan.c
-!Idrivers/acpi/scan.c
-<!-- No correct structured comments
-X!Edrivers/acpi/pci_bind.c
--->
-     </sect1>
-     <sect1><title>Device drivers PnP support</title>
-!Idrivers/pnp/core.c
-<!-- No correct structured comments
-X!Edrivers/pnp/system.c
- -->
-!Edrivers/pnp/card.c
-!Idrivers/pnp/driver.c
-!Edrivers/pnp/manager.c
-!Edrivers/pnp/support.c
-     </sect1>
-     <sect1><title>Userspace IO devices</title>
-!Edrivers/uio/uio.c
-!Iinclude/linux/uio_driver.h
-     </sect1>
-  </chapter>
-
-  <chapter id="parportdev">
-     <title>Parallel Port Devices</title>
-!Iinclude/linux/parport.h
-!Edrivers/parport/ieee1284.c
-!Edrivers/parport/share.c
-!Idrivers/parport/daisy.c
-  </chapter>
-
-  <chapter id="message_devices">
-	<title>Message-based devices</title>
-     <sect1><title>Fusion message devices</title>
-!Edrivers/message/fusion/mptbase.c
-!Idrivers/message/fusion/mptbase.c
-!Edrivers/message/fusion/mptscsih.c
-!Idrivers/message/fusion/mptscsih.c
-!Idrivers/message/fusion/mptctl.c
-!Idrivers/message/fusion/mptspi.c
-!Idrivers/message/fusion/mptfc.c
-!Idrivers/message/fusion/mptlan.c
-     </sect1>
-  </chapter>
-
-  <chapter id="snddev">
-     <title>Sound Devices</title>
-!Iinclude/sound/core.h
-!Esound/sound_core.c
-!Iinclude/sound/pcm.h
-!Esound/core/pcm.c
-!Esound/core/device.c
-!Esound/core/info.c
-!Esound/core/rawmidi.c
-!Esound/core/sound.c
-!Esound/core/memory.c
-!Esound/core/pcm_memory.c
-!Esound/core/init.c
-!Esound/core/isadma.c
-!Esound/core/control.c
-!Esound/core/pcm_lib.c
-!Esound/core/hwdep.c
-!Esound/core/pcm_native.c
-!Esound/core/memalloc.c
-<!-- FIXME: Removed for now since no structured comments in source
-X!Isound/sound_firmware.c
--->
-  </chapter>
-
-
-  <chapter id="uart16x50">
-     <title>16x50 UART Driver</title>
-!Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250/8250_core.c
-  </chapter>
-
-  <chapter id="fbdev">
-     <title>Frame Buffer Library</title>
-
-     <para>
-       The frame buffer drivers depend heavily on four data structures.
-       These structures are declared in include/linux/fb.h.  They are
-       fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs.
-       The last three can be made available to and from userland.
-     </para>
-
-     <para>
-       fb_info defines the current state of a particular video card.
-       Inside fb_info, there exists a fb_ops structure which is a
-       collection of needed functions to make fbdev and fbcon work.
-       fb_info is only visible to the kernel.
-     </para>
-
-     <para>
-       fb_var_screeninfo is used to describe the features of a video card
-       that are user defined.  With fb_var_screeninfo, things such as
-       depth and the resolution may be defined.
-     </para>
-
-     <para>
-       The next structure is fb_fix_screeninfo. This defines the
-       properties of a card that are created when a mode is set and can't
-       be changed otherwise.  A good example of this is the start of the
-       frame buffer memory.  This "locks" the address of the frame buffer
-       memory, so that it cannot be changed or moved.
-     </para>
-
-     <para>
-       The last structure is fb_monospecs. In the old API, there was
-       little importance for fb_monospecs. This allowed for forbidden things
-       such as setting a mode of 800x600 on a fix frequency monitor. With
-       the new API, fb_monospecs prevents such things, and if used
-       correctly, can prevent a monitor from being cooked.  fb_monospecs
-       will not be useful until kernels 2.5.x.
-     </para>
-
-     <sect1><title>Frame Buffer Memory</title>
-!Edrivers/video/fbdev/core/fbmem.c
-     </sect1>
-<!--
-     <sect1><title>Frame Buffer Console</title>
-X!Edrivers/video/console/fbcon.c
-     </sect1>
--->
-     <sect1><title>Frame Buffer Colormap</title>
-!Edrivers/video/fbdev/core/fbcmap.c
-     </sect1>
-<!-- FIXME:
-  drivers/video/fbgen.c has no docs, which stuffs up the sgml.  Comment
-  out until somebody adds docs.  KAO
-     <sect1><title>Frame Buffer Generic Functions</title>
-X!Idrivers/video/fbgen.c
-     </sect1>
-KAO -->
-     <sect1><title>Frame Buffer Video Mode Database</title>
-!Idrivers/video/fbdev/core/modedb.c
-!Edrivers/video/fbdev/core/modedb.c
-     </sect1>
-     <sect1><title>Frame Buffer Macintosh Video Mode Database</title>
-!Edrivers/video/fbdev/macmodes.c
-     </sect1>
-     <sect1><title>Frame Buffer Fonts</title>
-        <para>
-           Refer to the file lib/fonts/fonts.c for more information.
-        </para>
-<!-- FIXME: Removed for now since no structured comments in source
-X!Ilib/fonts/fonts.c
--->
-     </sect1>
-  </chapter>
-
-  <chapter id="input_subsystem">
-     <title>Input Subsystem</title>
-     <sect1><title>Input core</title>
-!Iinclude/linux/input.h
-!Edrivers/input/input.c
-!Edrivers/input/ff-core.c
-!Edrivers/input/ff-memless.c
-     </sect1>
-     <sect1><title>Multitouch Library</title>
-!Iinclude/linux/input/mt.h
-!Edrivers/input/input-mt.c
-     </sect1>
-     <sect1><title>Polled input devices</title>
-!Iinclude/linux/input-polldev.h
-!Edrivers/input/input-polldev.c
-     </sect1>
-     <sect1><title>Matrix keyboards/keypads</title>
-!Iinclude/linux/input/matrix_keypad.h
-     </sect1>
-     <sect1><title>Sparse keymap support</title>
-!Iinclude/linux/input/sparse-keymap.h
-!Edrivers/input/sparse-keymap.c
-     </sect1>
-  </chapter>
-
-  <chapter id="spi">
-      <title>Serial Peripheral Interface (SPI)</title>
-  <para>
-	SPI is the "Serial Peripheral Interface", widely used with
-	embedded systems because it is a simple and efficient
-	interface:  basically a multiplexed shift register.
-	Its three signal wires hold a clock (SCK, often in the range
-	of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and
-	a "Master In, Slave Out" (MISO) data line.
-	SPI is a full duplex protocol; for each bit shifted out the
-	MOSI line (one per clock) another is shifted in on the MISO line.
-	Those bits are assembled into words of various sizes on the
-	way to and from system memory.
-	An additional chipselect line is usually active-low (nCS);
-	four signals are normally used for each peripheral, plus
-	sometimes an interrupt.
-  </para>
-  <para>
-	The SPI bus facilities listed here provide a generalized
-	interface to declare SPI busses and devices, manage them
-	according to the standard Linux driver model, and perform
-	input/output operations.
-	At this time, only "master" side interfaces are supported,
-	where Linux talks to SPI peripherals and does not implement
-	such a peripheral itself.
-	(Interfaces to support implementing SPI slaves would
-	necessarily look different.)
-  </para>
-  <para>
-	The programming interface is structured around two kinds of driver,
-	and two kinds of device.
-	A "Controller Driver" abstracts the controller hardware, which may
-	be as simple as a set of GPIO pins or as complex as a pair of FIFOs
-	connected to dual DMA engines on the other side of the SPI shift
-	register (maximizing throughput).  Such drivers bridge between
-	whatever bus they sit on (often the platform bus) and SPI, and
-	expose the SPI side of their device as a
-	<structname>struct spi_master</structname>.
-	SPI devices are children of that master, represented as a
-	<structname>struct spi_device</structname> and manufactured from
-	<structname>struct spi_board_info</structname> descriptors which
-	are usually provided by board-specific initialization code.
-	A <structname>struct spi_driver</structname> is called a
-	"Protocol Driver", and is bound to a spi_device using normal
-	driver model calls.
-  </para>
-  <para>
-	The I/O model is a set of queued messages.  Protocol drivers
-	submit one or more <structname>struct spi_message</structname>
-	objects, which are processed and completed asynchronously.
-	(There are synchronous wrappers, however.)  Messages are
-	built from one or more <structname>struct spi_transfer</structname>
-	objects, each of which wraps a full duplex SPI transfer.
-	A variety of protocol tweaking options are needed, because
-	different chips adopt very different policies for how they
-	use the bits transferred with SPI.
-  </para>
-!Iinclude/linux/spi/spi.h
-!Fdrivers/spi/spi.c spi_register_board_info
-!Edrivers/spi/spi.c
-  </chapter>
-
-  <chapter id="i2c">
-     <title>I<superscript>2</superscript>C and SMBus Subsystem</title>
-
-     <para>
-	I<superscript>2</superscript>C (or without fancy typography, "I2C")
-	is an acronym for the "Inter-IC" bus, a simple bus protocol which is
-	widely used where low data rate communications suffice.
-	Since it's also a licensed trademark, some vendors use another
-	name (such as "Two-Wire Interface", TWI) for the same bus.
-	I2C only needs two signals (SCL for clock, SDA for data), conserving
-	board real estate and minimizing signal quality issues.
-	Most I2C devices use seven bit addresses, and bus speeds of up
-	to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet
-	found wide use.
-	I2C is a multi-master bus; open drain signaling is used to
-	arbitrate between masters, as well as to handshake and to
-	synchronize clocks from slower clients.
-     </para>
-
-     <para>
-	The Linux I2C programming interfaces support only the master
-	side of bus interactions, not the slave side.
-	The programming interface is structured around two kinds of driver,
-	and two kinds of device.
-	An I2C "Adapter Driver" abstracts the controller hardware; it binds
-	to a physical device (perhaps a PCI device or platform_device) and
-	exposes a <structname>struct i2c_adapter</structname> representing
-	each I2C bus segment it manages.
-	On each I2C bus segment will be I2C devices represented by a
-	<structname>struct i2c_client</structname>.  Those devices will
-	be bound to a <structname>struct i2c_driver</structname>,
-	which should follow the standard Linux driver model.
-	(At this writing, a legacy model is more widely used.)
-	There are functions to perform various I2C protocol operations; at
-	this writing all such functions are usable only from task context.
-     </para>
-
-     <para>
-	The System Management Bus (SMBus) is a sibling protocol.  Most SMBus
-	systems are also I2C conformant.  The electrical constraints are
-	tighter for SMBus, and it standardizes particular protocol messages
-	and idioms.  Controllers that support I2C can also support most
-	SMBus operations, but SMBus controllers don't support all the protocol
-	options that an I2C controller will.
-	There are functions to perform various SMBus protocol operations,
-	either using I2C primitives or by issuing SMBus commands to
-	i2c_adapter devices which don't support those I2C operations.
-     </para>
-
-!Iinclude/linux/i2c.h
-!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info
-!Edrivers/i2c/i2c-core.c
-  </chapter>
-
-  <chapter id="hsi">
-     <title>High Speed Synchronous Serial Interface (HSI)</title>
-
-     <para>
-	High Speed Synchronous Serial Interface (HSI) is a
-	serial interface mainly used for connecting application
-	engines (APE) with cellular modem engines (CMT) in cellular
-	handsets.
-
-	HSI provides multiplexing for up to 16 logical channels,
-	low-latency and full duplex communication.
-     </para>
-
-!Iinclude/linux/hsi/hsi.h
-!Edrivers/hsi/hsi_core.c
-  </chapter>
-
-  <chapter id="pwm">
-    <title>Pulse-Width Modulation (PWM)</title>
-    <para>
-      Pulse-width modulation is a modulation technique primarily used to
-      control power supplied to electrical devices.
-    </para>
-    <para>
-      The PWM framework provides an abstraction for providers and consumers
-      of PWM signals. A controller that provides one or more PWM signals is
-      registered as <structname>struct pwm_chip</structname>. Providers are
-      expected to embed this structure in a driver-specific structure. This
-      structure contains fields that describe a particular chip.
-    </para>
-    <para>
-      A chip exposes one or more PWM signal sources, each of which exposed
-      as a <structname>struct pwm_device</structname>. Operations can be
-      performed on PWM devices to control the period, duty cycle, polarity
-      and active state of the signal.
-    </para>
-    <para>
-      Note that PWM devices are exclusive resources: they can always only be
-      used by one consumer at a time.
-    </para>
-!Iinclude/linux/pwm.h
-!Edrivers/pwm/core.c
-  </chapter>
-
-</book>
diff --git a/Documentation/driver-api/drivers.rst b/Documentation/driver-api/drivers.rst
new file mode 100644
index 000000000000..17f99d441b52
--- /dev/null
+++ b/Documentation/driver-api/drivers.rst
@@ -0,0 +1,654 @@
+====================
+Linux Device Drivers
+====================
+
+Driver Basics
+=============
+
+Driver Entry and Exit points
+----------------------------
+
+.. kernel-doc:: include/linux/init.h
+   :internal:
+
+Atomic and pointer manipulation
+-------------------------------
+
+.. kernel-doc:: arch/x86/include/asm/atomic.h
+   :internal:
+
+Delaying, scheduling, and timer routines
+----------------------------------------
+
+.. kernel-doc:: include/linux/sched.h
+   :internal:
+
+.. kernel-doc:: kernel/sched/core.c
+   :export:
+
+.. kernel-doc:: kernel/sched/cpupri.c
+   :internal:
+
+.. kernel-doc:: kernel/sched/fair.c
+   :internal:
+
+.. kernel-doc:: include/linux/completion.h
+   :internal:
+
+.. kernel-doc:: kernel/time/timer.c
+   :export:
+
+Wait queues and Wake events
+---------------------------
+
+.. kernel-doc:: include/linux/wait.h
+   :internal:
+
+.. kernel-doc:: kernel/sched/wait.c
+   :export:
+
+High-resolution timers
+----------------------
+
+.. kernel-doc:: include/linux/ktime.h
+   :internal:
+
+.. kernel-doc:: include/linux/hrtimer.h
+   :internal:
+
+.. kernel-doc:: kernel/time/hrtimer.c
+   :export:
+
+Workqueues and Kevents
+----------------------
+
+.. kernel-doc:: include/linux/workqueue.h
+   :internal:
+
+.. kernel-doc:: kernel/workqueue.c
+   :export:
+
+Internal Functions
+------------------
+
+.. kernel-doc:: kernel/exit.c
+   :internal:
+
+.. kernel-doc:: kernel/signal.c
+   :internal:
+
+.. kernel-doc:: include/linux/kthread.h
+   :internal:
+
+.. kernel-doc:: kernel/kthread.c
+   :export:
+
+Kernel objects manipulation
+---------------------------
+
+.. kernel-doc:: lib/kobject.c
+   :export:
+
+Kernel utility functions
+------------------------
+
+.. kernel-doc:: include/linux/kernel.h
+   :internal:
+
+.. kernel-doc:: kernel/printk/printk.c
+   :export:
+
+.. kernel-doc:: kernel/panic.c
+   :export:
+
+.. kernel-doc:: kernel/sys.c
+   :export:
+
+.. kernel-doc:: kernel/rcu/srcu.c
+   :export:
+
+.. kernel-doc:: kernel/rcu/tree.c
+   :export:
+
+.. kernel-doc:: kernel/rcu/tree_plugin.h
+   :export:
+
+.. kernel-doc:: kernel/rcu/update.c
+   :export:
+
+Device Resource Management
+--------------------------
+
+.. kernel-doc:: drivers/base/devres.c
+   :export:
+
+Device drivers infrastructure
+=============================
+
+The Basic Device Driver-Model Structures
+----------------------------------------
+
+.. kernel-doc:: include/linux/device.h
+   :internal:
+
+Device Drivers Base
+-------------------
+
+.. kernel-doc:: drivers/base/init.c
+   :internal:
+
+.. kernel-doc:: drivers/base/driver.c
+   :export:
+
+.. kernel-doc:: drivers/base/core.c
+   :export:
+
+.. kernel-doc:: drivers/base/syscore.c
+   :export:
+
+.. kernel-doc:: drivers/base/class.c
+   :export:
+
+.. kernel-doc:: drivers/base/node.c
+   :internal:
+
+.. kernel-doc:: drivers/base/firmware_class.c
+   :export:
+
+.. kernel-doc:: drivers/base/transport_class.c
+   :export:
+
+.. kernel-doc:: drivers/base/dd.c
+   :export:
+
+.. kernel-doc:: include/linux/platform_device.h
+   :internal:
+
+.. kernel-doc:: drivers/base/platform.c
+   :export:
+
+.. kernel-doc:: drivers/base/bus.c
+   :export:
+
+Buffer Sharing and Synchronization
+----------------------------------
+
+The dma-buf subsystem provides the framework for sharing buffers for
+hardware (DMA) access across multiple device drivers and subsystems, and
+for synchronizing asynchronous hardware access.
+
+This is used, for example, by drm "prime" multi-GPU support, but is of
+course not limited to GPU use cases.
+
+The three main components of this are: (1) dma-buf, representing a
+sg_table and exposed to userspace as a file descriptor to allow passing
+between devices, (2) fence, which provides a mechanism to signal when
+one device as finished access, and (3) reservation, which manages the
+shared or exclusive fence(s) associated with the buffer.
+
+dma-buf
+~~~~~~~
+
+.. kernel-doc:: drivers/dma-buf/dma-buf.c
+   :export:
+
+.. kernel-doc:: include/linux/dma-buf.h
+   :internal:
+
+reservation
+~~~~~~~~~~~
+
+.. kernel-doc:: drivers/dma-buf/reservation.c
+   :doc: Reservation Object Overview
+
+.. kernel-doc:: drivers/dma-buf/reservation.c
+   :export:
+
+.. kernel-doc:: include/linux/reservation.h
+   :internal:
+
+fence
+~~~~~
+
+.. kernel-doc:: drivers/dma-buf/fence.c
+   :export:
+
+.. kernel-doc:: include/linux/fence.h
+   :internal:
+
+.. kernel-doc:: drivers/dma-buf/seqno-fence.c
+   :export:
+
+.. kernel-doc:: include/linux/seqno-fence.h
+   :internal:
+
+.. kernel-doc:: drivers/dma-buf/fence-array.c
+   :export:
+
+.. kernel-doc:: include/linux/fence-array.h
+   :internal:
+
+.. kernel-doc:: drivers/dma-buf/reservation.c
+   :export:
+
+.. kernel-doc:: include/linux/reservation.h
+   :internal:
+
+.. kernel-doc:: drivers/dma-buf/sync_file.c
+   :export:
+
+.. kernel-doc:: include/linux/sync_file.h
+   :internal:
+
+Device Drivers DMA Management
+-----------------------------
+
+.. kernel-doc:: drivers/base/dma-coherent.c
+   :export:
+
+.. kernel-doc:: drivers/base/dma-mapping.c
+   :export:
+
+Device Drivers Power Management
+-------------------------------
+
+.. kernel-doc:: drivers/base/power/main.c
+   :export:
+
+Device Drivers ACPI Support
+---------------------------
+
+.. kernel-doc:: drivers/acpi/scan.c
+   :export:
+
+.. kernel-doc:: drivers/acpi/scan.c
+   :internal:
+
+Device drivers PnP support
+--------------------------
+
+.. kernel-doc:: drivers/pnp/core.c
+   :internal:
+
+.. kernel-doc:: drivers/pnp/card.c
+   :export:
+
+.. kernel-doc:: drivers/pnp/driver.c
+   :internal:
+
+.. kernel-doc:: drivers/pnp/manager.c
+   :export:
+
+.. kernel-doc:: drivers/pnp/support.c
+   :export:
+
+Userspace IO devices
+--------------------
+
+.. kernel-doc:: drivers/uio/uio.c
+   :export:
+
+.. kernel-doc:: include/linux/uio_driver.h
+   :internal:
+
+Parallel Port Devices
+=====================
+
+.. kernel-doc:: include/linux/parport.h
+   :internal:
+
+.. kernel-doc:: drivers/parport/ieee1284.c
+   :export:
+
+.. kernel-doc:: drivers/parport/share.c
+   :export:
+
+.. kernel-doc:: drivers/parport/daisy.c
+   :internal:
+
+Message-based devices
+=====================
+
+Fusion message devices
+----------------------
+
+.. kernel-doc:: drivers/message/fusion/mptbase.c
+   :export:
+
+.. kernel-doc:: drivers/message/fusion/mptbase.c
+   :internal:
+
+.. kernel-doc:: drivers/message/fusion/mptscsih.c
+   :export:
+
+.. kernel-doc:: drivers/message/fusion/mptscsih.c
+   :internal:
+
+.. kernel-doc:: drivers/message/fusion/mptctl.c
+   :internal:
+
+.. kernel-doc:: drivers/message/fusion/mptspi.c
+   :internal:
+
+.. kernel-doc:: drivers/message/fusion/mptfc.c
+   :internal:
+
+.. kernel-doc:: drivers/message/fusion/mptlan.c
+   :internal:
+
+Sound Devices
+=============
+
+.. kernel-doc:: include/sound/core.h
+   :internal:
+
+.. kernel-doc:: sound/sound_core.c
+   :export:
+
+.. kernel-doc:: include/sound/pcm.h
+   :internal:
+
+.. kernel-doc:: sound/core/pcm.c
+   :export:
+
+.. kernel-doc:: sound/core/device.c
+   :export:
+
+.. kernel-doc:: sound/core/info.c
+   :export:
+
+.. kernel-doc:: sound/core/rawmidi.c
+   :export:
+
+.. kernel-doc:: sound/core/sound.c
+   :export:
+
+.. kernel-doc:: sound/core/memory.c
+   :export:
+
+.. kernel-doc:: sound/core/pcm_memory.c
+   :export:
+
+.. kernel-doc:: sound/core/init.c
+   :export:
+
+.. kernel-doc:: sound/core/isadma.c
+   :export:
+
+.. kernel-doc:: sound/core/control.c
+   :export:
+
+.. kernel-doc:: sound/core/pcm_lib.c
+   :export:
+
+.. kernel-doc:: sound/core/hwdep.c
+   :export:
+
+.. kernel-doc:: sound/core/pcm_native.c
+   :export:
+
+.. kernel-doc:: sound/core/memalloc.c
+   :export:
+
+16x50 UART Driver
+=================
+
+.. kernel-doc:: drivers/tty/serial/serial_core.c
+   :export:
+
+.. kernel-doc:: drivers/tty/serial/8250/8250_core.c
+   :export:
+
+Frame Buffer Library
+====================
+
+The frame buffer drivers depend heavily on four data structures. These
+structures are declared in include/linux/fb.h. They are fb_info,
+fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs. The last
+three can be made available to and from userland.
+
+fb_info defines the current state of a particular video card. Inside
+fb_info, there exists a fb_ops structure which is a collection of
+needed functions to make fbdev and fbcon work. fb_info is only visible
+to the kernel.
+
+fb_var_screeninfo is used to describe the features of a video card
+that are user defined. With fb_var_screeninfo, things such as depth
+and the resolution may be defined.
+
+The next structure is fb_fix_screeninfo. This defines the properties
+of a card that are created when a mode is set and can't be changed
+otherwise. A good example of this is the start of the frame buffer
+memory. This "locks" the address of the frame buffer memory, so that it
+cannot be changed or moved.
+
+The last structure is fb_monospecs. In the old API, there was little
+importance for fb_monospecs. This allowed for forbidden things such as
+setting a mode of 800x600 on a fix frequency monitor. With the new API,
+fb_monospecs prevents such things, and if used correctly, can prevent a
+monitor from being cooked. fb_monospecs will not be useful until
+kernels 2.5.x.
+
+Frame Buffer Memory
+-------------------
+
+.. kernel-doc:: drivers/video/fbdev/core/fbmem.c
+   :export:
+
+Frame Buffer Colormap
+---------------------
+
+.. kernel-doc:: drivers/video/fbdev/core/fbcmap.c
+   :export:
+
+Frame Buffer Video Mode Database
+--------------------------------
+
+.. kernel-doc:: drivers/video/fbdev/core/modedb.c
+   :internal:
+
+.. kernel-doc:: drivers/video/fbdev/core/modedb.c
+   :export:
+
+Frame Buffer Macintosh Video Mode Database
+------------------------------------------
+
+.. kernel-doc:: drivers/video/fbdev/macmodes.c
+   :export:
+
+Frame Buffer Fonts
+------------------
+
+Refer to the file lib/fonts/fonts.c for more information.
+
+Input Subsystem
+===============
+
+Input core
+----------
+
+.. kernel-doc:: include/linux/input.h
+   :internal:
+
+.. kernel-doc:: drivers/input/input.c
+   :export:
+
+.. kernel-doc:: drivers/input/ff-core.c
+   :export:
+
+.. kernel-doc:: drivers/input/ff-memless.c
+   :export:
+
+Multitouch Library
+------------------
+
+.. kernel-doc:: include/linux/input/mt.h
+   :internal:
+
+.. kernel-doc:: drivers/input/input-mt.c
+   :export:
+
+Polled input devices
+--------------------
+
+.. kernel-doc:: include/linux/input-polldev.h
+   :internal:
+
+.. kernel-doc:: drivers/input/input-polldev.c
+   :export:
+
+Matrix keyboards/keypads
+------------------------
+
+.. kernel-doc:: include/linux/input/matrix_keypad.h
+   :internal:
+
+Sparse keymap support
+---------------------
+
+.. kernel-doc:: include/linux/input/sparse-keymap.h
+   :internal:
+
+.. kernel-doc:: drivers/input/sparse-keymap.c
+   :export:
+
+Serial Peripheral Interface (SPI)
+=================================
+
+SPI is the "Serial Peripheral Interface", widely used with embedded
+systems because it is a simple and efficient interface: basically a
+multiplexed shift register. Its three signal wires hold a clock (SCK,
+often in the range of 1-20 MHz), a "Master Out, Slave In" (MOSI) data
+line, and a "Master In, Slave Out" (MISO) data line. SPI is a full
+duplex protocol; for each bit shifted out the MOSI line (one per clock)
+another is shifted in on the MISO line. Those bits are assembled into
+words of various sizes on the way to and from system memory. An
+additional chipselect line is usually active-low (nCS); four signals are
+normally used for each peripheral, plus sometimes an interrupt.
+
+The SPI bus facilities listed here provide a generalized interface to
+declare SPI busses and devices, manage them according to the standard
+Linux driver model, and perform input/output operations. At this time,
+only "master" side interfaces are supported, where Linux talks to SPI
+peripherals and does not implement such a peripheral itself. (Interfaces
+to support implementing SPI slaves would necessarily look different.)
+
+The programming interface is structured around two kinds of driver, and
+two kinds of device. A "Controller Driver" abstracts the controller
+hardware, which may be as simple as a set of GPIO pins or as complex as
+a pair of FIFOs connected to dual DMA engines on the other side of the
+SPI shift register (maximizing throughput). Such drivers bridge between
+whatever bus they sit on (often the platform bus) and SPI, and expose
+the SPI side of their device as a :c:type:`struct spi_master
+<spi_master>`. SPI devices are children of that master,
+represented as a :c:type:`struct spi_device <spi_device>` and
+manufactured from :c:type:`struct spi_board_info
+<spi_board_info>` descriptors which are usually provided by
+board-specific initialization code. A :c:type:`struct spi_driver
+<spi_driver>` is called a "Protocol Driver", and is bound to a
+spi_device using normal driver model calls.
+
+The I/O model is a set of queued messages. Protocol drivers submit one
+or more :c:type:`struct spi_message <spi_message>` objects,
+which are processed and completed asynchronously. (There are synchronous
+wrappers, however.) Messages are built from one or more
+:c:type:`struct spi_transfer <spi_transfer>` objects, each of
+which wraps a full duplex SPI transfer. A variety of protocol tweaking
+options are needed, because different chips adopt very different
+policies for how they use the bits transferred with SPI.
+
+.. kernel-doc:: include/linux/spi/spi.h
+   :internal:
+
+.. kernel-doc:: drivers/spi/spi.c
+   :functions: spi_register_board_info
+
+.. kernel-doc:: drivers/spi/spi.c
+   :export:
+
+I\ :sup:`2`\ C and SMBus Subsystem
+==================================
+
+I\ :sup:`2`\ C (or without fancy typography, "I2C") is an acronym for
+the "Inter-IC" bus, a simple bus protocol which is widely used where low
+data rate communications suffice. Since it's also a licensed trademark,
+some vendors use another name (such as "Two-Wire Interface", TWI) for
+the same bus. I2C only needs two signals (SCL for clock, SDA for data),
+conserving board real estate and minimizing signal quality issues. Most
+I2C devices use seven bit addresses, and bus speeds of up to 400 kHz;
+there's a high speed extension (3.4 MHz) that's not yet found wide use.
+I2C is a multi-master bus; open drain signaling is used to arbitrate
+between masters, as well as to handshake and to synchronize clocks from
+slower clients.
+
+The Linux I2C programming interfaces support only the master side of bus
+interactions, not the slave side. The programming interface is
+structured around two kinds of driver, and two kinds of device. An I2C
+"Adapter Driver" abstracts the controller hardware; it binds to a
+physical device (perhaps a PCI device or platform_device) and exposes a
+:c:type:`struct i2c_adapter <i2c_adapter>` representing each
+I2C bus segment it manages. On each I2C bus segment will be I2C devices
+represented by a :c:type:`struct i2c_client <i2c_client>`.
+Those devices will be bound to a :c:type:`struct i2c_driver
+<i2c_driver>`, which should follow the standard Linux driver
+model. (At this writing, a legacy model is more widely used.) There are
+functions to perform various I2C protocol operations; at this writing
+all such functions are usable only from task context.
+
+The System Management Bus (SMBus) is a sibling protocol. Most SMBus
+systems are also I2C conformant. The electrical constraints are tighter
+for SMBus, and it standardizes particular protocol messages and idioms.
+Controllers that support I2C can also support most SMBus operations, but
+SMBus controllers don't support all the protocol options that an I2C
+controller will. There are functions to perform various SMBus protocol
+operations, either using I2C primitives or by issuing SMBus commands to
+i2c_adapter devices which don't support those I2C operations.
+
+.. kernel-doc:: include/linux/i2c.h
+   :internal:
+
+.. kernel-doc:: drivers/i2c/i2c-boardinfo.c
+   :functions: i2c_register_board_info
+
+.. kernel-doc:: drivers/i2c/i2c-core.c
+   :export:
+
+High Speed Synchronous Serial Interface (HSI)
+=============================================
+
+High Speed Synchronous Serial Interface (HSI) is a serial interface
+mainly used for connecting application engines (APE) with cellular modem
+engines (CMT) in cellular handsets. HSI provides multiplexing for up to
+16 logical channels, low-latency and full duplex communication.
+
+.. kernel-doc:: include/linux/hsi/hsi.h
+   :internal:
+
+.. kernel-doc:: drivers/hsi/hsi_core.c
+   :export:
+
+Pulse-Width Modulation (PWM)
+============================
+
+Pulse-width modulation is a modulation technique primarily used to
+control power supplied to electrical devices.
+
+The PWM framework provides an abstraction for providers and consumers of
+PWM signals. A controller that provides one or more PWM signals is
+registered as :c:type:`struct pwm_chip <pwm_chip>`. Providers
+are expected to embed this structure in a driver-specific structure.
+This structure contains fields that describe a particular chip.
+
+A chip exposes one or more PWM signal sources, each of which exposed as
+a :c:type:`struct pwm_device <pwm_device>`. Operations can be
+performed on PWM devices to control the period, duty cycle, polarity and
+active state of the signal.
+
+Note that PWM devices are exclusive resources: they can always only be
+used by one consumer at a time.
+
+.. kernel-doc:: include/linux/pwm.h
+   :internal:
+
+.. kernel-doc:: drivers/pwm/core.c
+   :export:
diff --git a/Documentation/index.rst b/Documentation/index.rst
index 05eded59820e..0d6992b897c8 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -13,6 +13,7 @@ Contents:
 
    kernel-documentation
    dev-tools/tools
+   driver-api/drivers
    media/index
    gpu/index
 
